tests/testthat/_snaps/gregorian-year-month-weekday.md

In clock: Date-Time Types and Tools

both day and index must be specified

Code
  year_month_weekday(2020, 1, 1)
Condition
  Error in `year_month_weekday()`:
  ! If either `day` or `index` is specified, both must be specified.

validates value ranges

Code
  year_month_weekday(50000)
Condition
  Error in `year_month_weekday()`:
  ! `year` must be between [-32767, 32767].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 13)
Condition
  Error in `year_month_weekday()`:
  ! `month` must be between [1, 12].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 32, 1)
Condition
  Error in `year_month_weekday()`:
  ! `day` must be between [1, 7].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 6)
Condition
  Error in `year_month_weekday()`:
  ! `index` must be between [1, 5].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 24)
Condition
  Error in `year_month_weekday()`:
  ! `hour` must be between [0, 23].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 1, 60)
Condition
  Error in `year_month_weekday()`:
  ! `minute` must be between [0, 59].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 1, 1, 60)
Condition
  Error in `year_month_weekday()`:
  ! `second` must be between [0, 59].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 1, 1, 1, 1000, subsecond_precision = "millisecond")
Condition
  Error in `year_month_weekday()`:
  ! `subsecond` must be between [0, 999].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 1, 1, 1, 1e+06, subsecond_precision = "microsecond")
Condition
  Error in `year_month_weekday()`:
  ! `subsecond` must be between [0, 999999].
  i Invalid results at locations: 1.

Code
  year_month_weekday(2020, 1, 1, 1, 1, 1, 1, 1e+09, subsecond_precision = "nanosecond")
Condition
  Error in `year_month_weekday()`:
  ! `subsecond` must be between [0, 999999999].
  i Invalid results at locations: 1.

cannot compare / sort with day precision or finer

Code
  x > x
Condition
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

Code
  vec_order(x)
Condition
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

full ptype is correct

[1] "year_month_weekday<year>"

[1] "year_month_weekday<day>"

[1] "year_month_weekday<nanosecond>"

[1] "year_month_weekday<day>"

abbreviated ptype is correct

[1] "ymw<year>"

[1] "ymw<day>"

[1] "ymw<nano>"

[1] "ymw<day>"

setters recycling works both ways

Code
  x <- year_month_weekday(1:2)
  y <- 1:3
  set_month(x, y)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't recycle `x` (size 2) to match `value` (size 3).

setters require integer value

Code
  set_year(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_month(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_day(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_index(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_hour(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_minute(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_second(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_millisecond(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_microsecond(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

Code
  set_nanosecond(x, 1.5)
Condition
  Error in `set_field_year_month_weekday()`:
  ! Can't convert from `value` <double> to <integer> due to loss of precision.
  * Locations: 1

setters check value range

Code
  set_year(x, 1e+05)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [-32767, 32767].
  i Invalid results at locations: 1.

Code
  set_month(x, 13)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [1, 12].
  i Invalid results at locations: 1.

Code
  set_day(x, 8)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [1, 7].
  i Invalid results at locations: 1.

Code
  set_index(x, 6)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [1, 5].
  i Invalid results at locations: 1.

Code
  set_hour(x, 24)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 23].
  i Invalid results at locations: 1.

Code
  set_minute(x, 60)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 59].
  i Invalid results at locations: 1.

Code
  set_second(x, 60)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 59].
  i Invalid results at locations: 1.

Code
  set_millisecond(x, -1)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 999].
  i Invalid results at locations: 1.

Code
  set_microsecond(x, -1)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 999999].
  i Invalid results at locations: 1.

Code
  set_nanosecond(x, -1)
Condition
  Error in `set_field_year_month_weekday()`:
  ! `value` must be between [0, 999999999].
  i Invalid results at locations: 1.

setters require minimum precision

Code
  set_day(year_month_weekday(year = 1), 1, index = 1)
Condition
  Error in `set_day()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be at least "month".
  i `x` has a precision of "year".

Code
  set_hour(year_month_weekday(year = 1, month = 2), 1)
Condition
  Error in `set_hour()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be at least "day".
  i `x` has a precision of "month".

Code
  set_minute(year_month_weekday(year = 1, month = 2, day = 3, index = 1), 1)
Condition
  Error in `set_minute()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be at least "hour".
  i `x` has a precision of "day".

Code
  set_second(year_month_weekday(year = 1, month = 2, day = 3, index = 1, hour = 4),
  1)
Condition
  Error in `set_second()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be at least "minute".
  i `x` has a precision of "hour".

Code
  set_millisecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5), 1)
Condition
  Error in `set_millisecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "millisecond".
  i `x` has a precision of "minute".

Code
  set_microsecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5), 1)
Condition
  Error in `set_microsecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "microsecond".
  i `x` has a precision of "minute".

Code
  set_nanosecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5), 1)
Condition
  Error in `set_nanosecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "nanosecond".
  i `x` has a precision of "minute".

setters require correct subsecond precision

Code
  set_millisecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "microsecond"),
  1)
Condition
  Error in `set_millisecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "millisecond".
  i `x` has a precision of "microsecond".

Code
  set_millisecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "nanosecond"),
  1)
Condition
  Error in `set_millisecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "millisecond".
  i `x` has a precision of "nanosecond".

Code
  set_microsecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "millisecond"),
  1)
Condition
  Error in `set_microsecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "microsecond".
  i `x` has a precision of "millisecond".

Code
  set_microsecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "nanosecond"),
  1)
Condition
  Error in `set_microsecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "microsecond".
  i `x` has a precision of "nanosecond".

Code
  set_nanosecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "millisecond"),
  1)
Condition
  Error in `set_nanosecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "nanosecond".
  i `x` has a precision of "millisecond".

Code
  set_nanosecond(year_month_weekday(year = 1, month = 2, day = 3, index = 1,
    hour = 4, minute = 5, second = 6, subsecond = 7, subsecond_precision = "microsecond"),
  1)
Condition
  Error in `set_nanosecond()`:
  ! Can't perform this operation because of the precision of `x`.
  i The precision of `x` must be "second" or "nanosecond".
  i `x` has a precision of "microsecond".

default formats are correct

Code
  format(year_month_weekday(2019))
Output
  [1] "2019"

Code
  format(year_month_weekday(2019, 1))
Output
  [1] "2019-01"

Code
  format(year_month_weekday(2019, 1, 1, 2, 1))
Output
  [1] "2019-01-Sun[2]T01"

Code
  format(year_month_weekday(2019, 1, 1, 2, 1, 2, 3, 50, subsecond_precision = "microsecond"))
Output
  [1] "2019-01-Sun[2]T01:02:03.000050"

can't compute start with a year_month_weekday at day precision or greater

Code
  calendar_start(year_month_weekday(2019, 2, 2, 2), "day")
Condition
  Error in `calendar_start()`:
  ! Computing the start of a 'year_month_weekday' with a precision equal to or more precise than 'day' is undefined.

Code
  calendar_start(year_month_weekday(2019, 2, 2, 2), "month")
Condition
  Error in `calendar_start()`:
  ! Computing the start of a 'year_month_weekday' with a precision equal to or more precise than 'day' is undefined.

can't compute end with a year_month_weekday at day precision or greater

Code
  calendar_end(year_month_weekday(2019, 2, 2, 2), "day")
Condition
  Error in `calendar_end()`:
  ! Computing the end of a 'year_month_weekday' with a precision equal to or more precise than 'day' is undefined.

Code
  calendar_end(year_month_weekday(2019, 2, 2, 2), "month")
Condition
  Error in `calendar_end()`:
  ! Computing the end of a 'year_month_weekday' with a precision equal to or more precise than 'day' is undefined.

can't compare a 'year_month_weekday' with day precision!

Code
  (expect_error(calendar_count_between(x, x, "month")))
Output
  <error/rlang_error>
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

only granular precisions are allowed

Code
  seq(year_month_weekday(2019, 1, 1, 1), by = 1, length.out = 2)
Condition
  Error in `seq.clock_year_month_day()`:
  ! `from` must be 'year' or 'month' precision.

strict mode can be activated

Code
  invalid_resolve(year_month_weekday(2019, 1, 1, 1))
Condition
  Error in `strict_validate_invalid()`:
  ! The global option, `clock.strict`, is currently set to `TRUE`. In this mode, `invalid` must be set and cannot be left as `NULL`.

throws known classed error

Code
  invalid_resolve(year_month_weekday(2019, 1, 1, 5))
Condition
  Error in `invalid_resolve()`:
  ! Invalid date found at location 1.
  i Resolve invalid date issues by specifying the `invalid` argument.

minimums are right

Code
  clock_minimum(clock_empty_year_month_weekday_year)
Output
  <year_month_weekday<year>[1]>
  [1] "-32767"
Code
  clock_minimum(clock_empty_year_month_weekday_month)
Output
  <year_month_weekday<month>[1]>
  [1] "-32767-01"

Code
  clock_minimum(year_month_weekday(1, 1, 1, 1))
Condition
  Error in `clock_minimum()`:
  ! Can't compute the minimum of this <year_month_weekday>, as it is undefined.
  i The most precise allowed precision is "month".
  i `x` has precision "day".

maximums are right

Code
  clock_maximum(clock_empty_year_month_weekday_year)
Output
  <year_month_weekday<year>[1]>
  [1] "32767"
Code
  clock_maximum(clock_empty_year_month_weekday_month)
Output
  <year_month_weekday<month>[1]>
  [1] "32767-12"

Code
  clock_maximum(year_month_weekday(1, 1, 1, 1))
Condition
  Error in `clock_maximum()`:
  ! Can't compute the maximum of this <year_month_weekday>, as it is undefined.
  i The most precise allowed precision is "month".
  i `x` has precision "day".

min() / max() / range() aren't defined at or past day precision

Code
  min(x)
Condition
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

Code
  max(x)
Condition
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

Code
  range(x)
Condition
  Error in `vec_proxy_compare()`:
  ! 'year_month_weekday' types with a precision of >= 'day' cannot be trivially compared or ordered. Convert to 'year_month_day' to compare using day-of-month values.

Code
  min(x)
Condition
  Error in `clock_maximum()`:
  ! Can't compute the maximum of this <year_month_weekday>, as it is undefined.
  i The most precise allowed precision is "month".
  i `x` has precision "day".

Code
  max(x)
Condition
  Error in `clock_minimum()`:
  ! Can't compute the minimum of this <year_month_weekday>, as it is undefined.
  i The most precise allowed precision is "month".
  i `x` has precision "day".

Code
  range(x)
Condition
  Error in `clock_maximum()`:
  ! Can't compute the maximum of this <year_month_weekday>, as it is undefined.
  i The most precise allowed precision is "month".
  i `x` has precision "day".

add_*() respect recycling rules

Code
  add_years(year_month_weekday(1:2), 1:3)
Condition
  Error in `add_years()`:
  ! Can't recycle `x` (size 2) to match `n` (size 3).

clock documentation built on May 31, 2023, 9:39 p.m.