NEWS.md

In ropenscilabs/tic: Tasks Integrating Continuously: CI-Agnostic Workflow Definitions

tic 0.14.0 (2023-12-15)

• Install {tic} via r-universe to avoid re-installation issues with {pak}
• Switch to official actions/save and actions/restore actions after they support to always save and restore cache
• Update all templates

tic 0.13.3 (2023-05-22)

• Updated actions/upload-artifact version to v3 to silence nodejs deprecation warnings

tic 0.13.2 (2022-11-23)

• Bump template revision: account for GHA deprecation warnings regarding set-output and save-state

tic 0.13.1 (2022-08-28)

• Circle CI: install pandoc in deploy stage
• Do not use RSPM binaries on R-devel (no binaries available)
• Bump templates to 2022-08-28

tic 0.13.0 (2022-08-28)

• Use {pak} for pkg installation and binaries on Linux (#327)
• Update instructions for building {sf} and {terra} from source (#326)
• use_*_yml(): change default template type to use only Linux runners
• Add basic support for Drone CI (#325)

tic 0.12.0 (2022-03-01)

• Update Circle CI templates to 2022-03-01
• Remove ccache parts
• Run nightly builds also on main branch
• Update GHA and Circle CI templates to 2022-03-01
• Update to setup-tinytex@v2
• Update to setup-r@v2
• Update to setup-pandoc@v2
• Update to checkout@v3
• Only run one set of runners in pull requests. Previously, runners were triggered both by commits to a branch and the respective pull request
• Fixed a bug in update_yml() which updated the wrong CI config file in certain situations

tic 0.11.4.9000 (2022-01-28)

• Same as previous version.

tic 0.11.4 (2022-01-28)

• Add compatibility for rlang >= v1.0.0

tic 0.11.3 (2021-12-22)

• do_pkgdown(): Fix accidental deployments from pull requests (#308)

tic 0.11.2 (2021-12-05)

• do_pkgdown() now always create a .nojekyll file for both release and development deployments. Otherwise custom fonts starting with an underscore will not be loaded as Jekyll ignores this pattern. A .nojekyll file tells GitHub pages to not use Jekyll for serving the web page. (#307)

tic 0.11.1 (2021-06-27)

• Templates: install required system libs for {pkgdown} conditionally (accidentally removed in the previous template revision on 2021-06-26)
• Templates: restore installation of libcurl4-openssl-dev and libgit2-dev

tic 0.11.0 (2021-06-26)

• Templates: On Linux, system libraries are now installed via remotes::system_requirements() (#300)
• Instead of using an exact version tag, the core GHA actions are now referenced using a dynamic major version tag (e.g. v2 instead of v2.3.4). This includes an update of the templates to the latest revision date 2021-06-26.
• do_pkgdown() macro now also builds the site on on branches containing the word cran. This adds support for the {fledge} release mechanism when using both a development and release site (#303)
• update-tic.yml: Remove hardcoded reference to master branch
• update_yaml() is not in beta state anymore

tic 0.10.0 (2020-12-11)

• Drop Travis support (#295)
• Drop Appveyor support (#296)
• Bump templates: install required libgit2 required by usethis v2.0.0 (tic dep)

tic 0.9.0.9008 (2020-11-18)

• update peter-evans/create-pull-request action in update-tic.yml template to v3.5.0

tic 0.9.0.9007 (2020-11-14)

• update GitHub Actions templates
• update actions/checkout to v2.3.4
• update actions/upload-artifacts to v2.2.1
• update pat-s/always-upload-cache to v2.1.3
• conditionally install pkgdown required system libs on both Linux and macOS

tic 0.9.0.9006 (2020-09-19)

• Replace hardcoded references to "master" by a dynamic query of the default repo branch

tic 0.9.0.9005 (2020-09-04)

• use_tic(): use GitHub Actions as the default provider for all platforms
• Copy over GitHub authentication and SSH helpers from {travis}

tic 0.9.0.9004 (2020-08-27)

• update_yml(): Support updating multiple YAML files

tic 0.9.0.9003 (2020-08-06)

• GHA: add workflow_dispatch event trigger to templates
• update instructions for spatial libs on macOS for GHA
• improve heuristic for updating header parts of "custom" and "custom-deploy" templates

tic 0.9.0.9002

• DSL: Don't add steps twice, if present in a previous macro (#272)
• update-tic.yml: use peter-evans/create-pull-request@v3 and actions/checkout v2.3.1. Run on ubuntu instead of macOS
• run r-devel on ubuntu instead of macOS
• pin actions/upload-artifact to v2.1.1
• update actions/checkout to v2.3.1
• update pat-s/always-upload-cache to v2.1.0
• step_setup_ssh() now verifies that {git2r} is installed. This prevents build failures for {rsconnect} deployments
• update-tic.yml: install libs via apt on Linux instead of brew

tic 0.9.0.9001

• gha_add_secret(): Add new upstream parameters and fix endpoint

tic 0.9.0.9000

• Same as previous version.

tic 0.9.0

Features

• update_yaml(): Account for duplicated env vars when a custom env var masks a template env var
• use_tic_badge(): Update tic badge and default action name (#269)
• Installing and using ccache for faster source package installation is now optional. While using ccache can help a lot for installing large dependency chains of certain packages, it also adds substantial overhead to builds for small packages. It is now optional and needs to be added as a custom block to builds. (#264)
• Add step_session_info(). This step prints the session info after having installed all dependencies in the "install" stage. (#259)
• step_install_deps() and do_package_checks() gain dependencies = TRUE argument.
• New use_update_tic(): Adds GitHub Actions workflow update-tic.yml to automatically update tic YAML templates
• Support fully custom runner matrices on GitHub Actions via template types "custom" and ´"custom-deploy"`
• New gha_add_secret() to automate the process of adding a GitHub PAT to a repo as a secret. This function will probably be move to {ghactions} in the future.

Bugfixes

• Temporarily enforce {covr} dev version to account for timeouts on GHA, see https://github.com/r-lib/covr/issues/435
• Remove alert in steps-install.R (#263)
• Pass arg remote to all printing instances. Previously using a different remote than "origin" caused an error..

CI Provider specific

GitHub Actions

• Update versions of "tinytex" and "always-upload-cache" actions (#267)
• Install LaTeX on only one runner (#257)
• Switch from main.yml to tic.yml (#260)
• Set env var GITHUB_PAT from secret GITHUB_TOKEN to work around rate limits in {remotes}
• Update actions/checkout to v2.1.1
• Update pat-s/always-upload-cache to v2.0.0
• Remove old clang7 compiler setup for R <= 3.6.3

tic 0.8.0.9009

• Temporarily enforce {covr} dev version to account for timeouts on GHA, see https://github.com/r-lib/covr/issues/435
• use_tic_badge(): Update tic badge and default action name (#269)
• GHA: Update versions of "tinytex" and "always-upload-cache" actions (#267)

tic 0.8.0.9008

• Make ccache optional (and more) (#264)
• Remove alert in steps-install.R (#263)

tic 0.8.0.9007

• Add step_session_info() (#259)
• GHA: Install LaTeX on only one runner (#257)
• GHA: Switch from main.yml to tic.yml (#260)

tic 0.8.0.9006

• step_install_deps() and do_package_checks() gain dependencies = TRUE argument.

tic 0.8.0.9005

• GHA: Set env var GITHUB_PAT from secret GITHUB_TOKEN to work around rate limits in {remotes}

tic 0.8.0.9004

• New use_update_tic(): Adds GitHub Actions workflow update-tic.yml to automatically update tic YAML templates

tic 0.8.0.9003

• Support fully custom runner matrices on GitHub Actions via template types "custom" and ´"custom-deploy"`
• bugfix: Pass arg remote to all printing instances. Previously using a different remote than "origin" errored.

tic 0.8.0.9002

• New gha_add_secret() to automate the process of adding a GitHub PAT to a repo as a secret. This function will probably be move to {ghactions} in the future.

tic 0.8.0.9001

GitHub Actions

• Update actions/checkout to v2.1.1
• Update pat-s/always-upload-cache to v1.2.0
• Remove old clang7 compiler setup for R <= 3.6.3

tic 0.8.0.9000

• Same as previous version.

tic 0.8.0

Features

• New update_yml(): Update your {tic} yaml templates to the latest upstream version in {tic}. User changes are preserved if these are marked correctly. See vignette "Updating Templates" for instructions. This process can also be fully automated via a custom CI job.
• Add argument force to step_do_push_deploy() for adding the --force flag to git calls
• Add solutions to {rgl} installation issues to FAQ
• Update .R/Makevars

CI Provider specific

GitHub Actions

• Set CRON time to 4 am to avoid download issues with mirror updates
• Added -I/usr/local/include to CPPFLAGS for macOS runners to mirror CRAN setup

Circle CI

• Update r-oldrelease to R 3.6.3

tic 0.7.0.9000

• GHA: added -I/usr/local/include to CPPFLAGS for macOS runners to mirror CRAN
• Add solutions to installation issues for package {rgl} to FAQ
• Add argument force to step_do_push_deploy() for adding the --force flag to git calls

tic 0.7.0

Macros

• Add do_blogdown() macro (#242)

CI Provider specific

GitHub Actions

• use_tic(): Move cli::tree() calls to use_*_yml() functions to avoid printing of false-positive trees.
• use_*_yml(): Set defaults for argument type.
• Fix GHA build URL and prettify deploy message (#247)
• Adjust GH Actions templates to use the use_*_yml() logic (#246)
• Bugfix: Packages on R-devel macOS are being installed in parallel again.

R 4.0 toolchain

• GitHub Actions: R-devel on macOS now uses Apples default clang compiler and the 10.13 SDK (High Sierra) to mimic the CRAN toolchain behavior. (The 10.15 SKD causes various issues when installing packages from source.)
• Env var SDKROOT is now set to /Library/Developer/CommandLineTools/SDKs/MacOSX.sdk to prevent linking issues on macOS >= 10.15.4

tic 0.6.0.9002

• do_blogdown() and do_bookdown() gain argument cname, making it possible to pass a CNAME URL for deployments. This is useful when setting one sets orphan = TRUE and relies on a custom URL of the published content (otherwise the redirect would not work)
• Add a better general intro about CI and explain some general CI terms (fixes #234)

tic 0.6.0.9001

• Add do_blogdown() macro (#242)

tic 0.6.0.9000

• Same as previous version.

tic 0.6.0

General

• use_badge: Refactor to use default badges from the respective providers rather than from shields.io (too slow and sometimes badges did not render at all) (#240)
• Condition deployment templates on a single runner for deployment. This avoids race conditions during deployment. This applies to all CI providers and templates (blogdown, bookdown, package) (#241)
• Files specified for deployment via step_push_deploy(commit_paths = ) are now force added to the index by git. This enables to add directories like docs/ (e.g. created by a local pkgdown build) to .gitignore and still deploy it during CI (#237).

CI Provider specific

GitHub Actions

• GitHub Actions: Always use option '--no-manual' on Windows because LaTeX is not available (because it takes ages to install)
• step_rcmdcheck(): Test in directory "check" to simplify upload of artifacts
• Set cron job to 4am to avoid potential download issues with R-devel on macOS
• Github Actions: Only deploy on R-release on macOS by default.

Bugfixes

• use_tic() fails with descriptive error message if the badges start/end sections are missing in README
• step_install_ssh_keys(): Do not use git2r::config() when deploying on Windows to prevent build freezes

Documentation

• faq.Rmd: Add info how to avoid git race conditions during pkgdown deployment (#238)

tic 0.5.0.9005

• use_tic() fails with descriptive error message if the badges start/end sections are missing in README

tic 0.5.0.9004

• faq.Rmd: Add info how to avoid git race conditions during pkgdown deployment (#238)
• step_install_ssh_keys(): Do not use git2r::config() when deploying on Windows to prevent build freezes
• update blogdown templates
• GitHub Actions: Always use option '--no-manual' on Windows because LaTeX is not available

tic 0.5.0.9003

• Files specified for deployment via step_push_deploy(commit_paths = ) are now force added to the index by git. This enables to add directories like docs/ (e.g. created by a local pkgdown build) to .gitignore and still deploy it during CI (#237).
• step_rcmdcheck(): Test in dir "check" to simplify upload of artifacts

Github Actions

• Set cron job to 4am to avoid potential download issues with R-devel on macOS
• Github Actions: Use actions/checkout v2
• Github Actions: Only deploy on R-release on macOS by default. This avoids git race conditions between runners.

tic 0.5.0.9002

• Github Actions: {covr} now supports automatic upload of codecov results via their own CODECOV_TOKEN
• use_tic_r(): Add support for conditional tic.R templates via argument deploy_on.
• export use_tic_r() so that a manual workflow is possible (besides use_tic())
• GitHub Actions: use actions "pat-s/always-upload-cache" instead of "actions/cache"

tic 0.5.0.9001

• Add use_tic_badge(): Creation of pretty CI status badges

tic 0.5.0.9000

• Same as previous version.

tic 0.5.0

Enhancements

• New function tic::use_ghactions_deploy() (status "experimental") to set up a SSH key for deployment.
• New function use_ghactions_yml() with deploy = TRUE/FALSE (FALSE by default).
• New Vignette "FAQ".
• Added GH Actions support to use_tic()
• new macro do_readme_rmd() (#223)
• new function list_macros()

Maintenance

• Change for the default of the private SSH deploy key name from TRAVIS_DEPLOY_KEY to TIC_DEPLOY_KEY to have a generic name.
• Change argument travis_private_key_name to private_key_name
• Renamed yaml-templates.R to yaml_templates.R because the former caused troubles when previewing the dev version of the docs.
• Beautified the CLI output of use_tic()
• Replaced all instances of _tic_ in the docs by {tic}

tic 0.4.0.9000

• add macro do_readme_rmd() (#223)
• new function list_macros()

tic 0.4.0

• add macro do_drat()
• start vignette "troubleshooting"
• add {desc} to suggests
• ci_can_push() never fails.
• templates: always upgrade dep packages during {tic} installation

tic 0.3.0.9005

• Make it possible to pass the endpoint arg from {travis} funs to use_tic()
• mention the difference between .com and .org -> new vignette "org-vs-com"

• move package to ropensci org

• error_on = "note" also fails on warnings.

tic 0.3.0.9004

• ci_can_Push(): Error with descriptive error message if deployment is not possible
• ci_can_push(): Fix for Travis CI
• optimize templates (especially matrix builds) by specifying which job is used for the pkgdown build

tic 0.3.0.9003

• use_tic(): add key_name_private and key_name_public args from travis::use_travis_deploy()
• ci_can_push(): Change default from "id_rsa"" to "TRAVIS_DEPLOY_KEY" and also support backward comp
• use_tic(): Travis as default for Linux and macOS

tic 0.3.0.9002

• use_tic() supports running both Linux and macOS on Travis (#202).
• Skip TicStep$prepare if prepare_call is given in add_code_step() (#211).
• Fix preparation of step_add_to_drat().
• use_tic() gains arguments that allow non-interactive use and re-running with the same settings if setup fails (#203).
• Removed artificial sleeps with interactive setup.

tic 0.3.0.9001

• Move use_travis_deploy() back to {travis}.

tic 0.3.0

• add argument "check_dir" to step_rcmdcheck (#179)
• use remotes::install_cran(upgrade = TRUE) to install packages (#186)
• added support for Circle CI (#177)
• All packages installed for custom steps use binary packages if possible on Windows and macOS (#178).
• Use TRAVIS_BUILD_WEB_URL for the commit message.
• do_package_checks() gains type argument.
• Tweak documentation.
• export use_travis_yml(), use_circle_yml() and use_appveyor_yml() and add overview table of available options

tic 0.2.13.9020

• Avoid building packages when installing dependencies.
• Remove vignettes from package if checking with --no-build-vignettes to avoid warning from R CMD check.
• Fix R CMD build and R CMD check switches on AppVeyor.

tic 0.2.13.9019

• Building pkgdown site succeeds if docs/ directory is missing (#173, r-lib/pkgdown#1050).

tic 0.2.13.9018

• Move use_travis_deploy() from the travis package to here.
• Unexport get_public_key() and encode_private_key().

tic 0.2.13.9017

• Test utils and printing.
• Exclude code that can only run interactively or in a CI from coverage.
• Add comment regarding integration test.
• Strip long source code lines.
• Add review badge.
• Add tic.R to .Rbuildignore for internal tests.
• Update wordlist.
• Fix typos.
• Condition example on presence of Git repository.

tic 0.2.13.9016

• Fix compatibility with git 2.21 and above for race conditions (#160).
• step_build_pkgdown() clean site before building.
• AppVeyor template makes sure packages are always installed from binary during bootstrapping.
• CI templates install from GitHub if the version number indicates that the package is not on CRAN yet.
• AppVeyor doesn't cache R packages, because this leads to update problems. Binary installation is fast enough.
• Don't perform CRAN incoming checks, in particular the checks for large version components (#168).
• The step_install_deps(), step_install_cran() and step_install_github() steps install binary packages by default, even if the CRAN version is ahead.
• All files created by use_tic() are added to .Rbuildignore.
• Package template for tic.R runs pkgdown only on Travis (#167).
• Update vignettes (#156).

tic 0.2.13.9015

• detect_repo_type() now prompts the user for unknown repository types (#161).
• use_tic() loses path argument, now taken from usethis::proj_get() .
• step_rcmdcheck() and do_package_checks() now avoid building the vignette by default on AppVeyor (#150).
• use_tic() now uses boxes from {cli} for better structured output (#153).

tic 0.2.13.9014

• Configuration storage modeled after usethis::proj_get().
• New dsl_load(), renamed from load_from_file().
• New dsl_get() and dsl_init().
• Added examples to help for get_stage() and macros (#77).

tic 0.2.13.9013

• Using tidy evaluation for simpler code, more control and better printing of steps (#77).
• Fix AppVeyor builds.
• The README is now explicit about suggesting that each repo should contain only one project (#152).
• Documentation uses the {rotemplate} package (#121).
• Only install {remotes} and {curl} if not yet installed (#97).
• New use_tic(), moved from {travis} (#138).
• Updated templates (#81).
• A failing step displays a traceback generated by rlang::trace_back() (#105).
• do_pkgdown() and do_bookdown() now have a deploy argument and are documented on separate help pages. The new ?macro help page provides an overview.
• Implement print() methods for DSL and stages (#77).
• New do_bookdown() (#137).

tic 0.2.13.9012

• New repo_*() functions to simplify specification of the repos argument to installer functions (#101).
• Add Appveyor checks (#147, @pat-s).
• New pkgdown macro via do_pkgdown() (#126, @pat-s)
• New example: covrpage, cc @yonicd
• step_rcmdcheck(error_on = "note") works again (#119).
• New do_package_checks() with codecov = TRUE argument (#146), replaces add_package_checks() which stays around for compatibility (#128).
• add_step() now evaluates the step argument in a tryCatch() block and gives a bit of context if this fails (#73).
• New run_all_stages(), previously tic() (#66).
• New ci_get_env(), ci_has_env() and ci_is_env() functions to avoid verbose Sys.getenv() calls in tic.R (#124, @pat-s).
• New ci_*() functions to avoid R6 notation in tic.R (#125, @pat-s).

tic 0.2.13.9011

• New step_install_deps(), reorganizing help pages so that installer steps are on the same page.
• step_rcmdcheck() no longer installs dependencies. Instead, add_package_checks() includes step_install_deps() (#74).
• Fix two links in README (#115, @Rekyt).
• Vignette update (#80, @pat-s).
• Support build_args argument in step_rcmdcheck() (#64, @pat-s).

step_rcmdcheck()

• deprecate warnings_are_errors and notes_are_errors in favor of the new error_on argument
• add args timeout and repos
• call rcmdcheck() internally with error_on = "never" so that we can trigger the message on found warnings and notes
• remote outdated doc about step_rcmdcheck() using a dedicated lib for the check

tic 0.2.13.9010

• No longer using a separate library for package checks, because it causes a lot of problems with various steps which are not aware of this (#86, #88).
• Packages coming with the R-installation are not updated anymore when preparing step_rcmdcheck(). See ?step_rcmdcheck() for detailed info. (#103)

tic 0.2.13.9009

• The step_build_pkgdown() step now uses the same dedicated library as step_rcmdcheck().
• Using the development version of rcmdcheck to work around problems finding the vignette builder (#84).
• Draft for new "Get started" vignette (#63, @pat-s).

tic 0.2.13.9008

• The step_rcmdcheck() step now uses a dedicated library for installing the packages and checking, it also updates the packages after installing dependencies. The add_package_checks() macro no longer includes an update.packages() call (#35).
• The step_rcmdcheck() step now installs all dependencies during preparation. The add_package_checks() macro no longer adds the code step that installs dependencies.

tic 0.2.13.9007

• The step_do_push_deploy() and step_push_deploy() steps are not executed for builds on a tag, because this would create a branch of the same name as the tag (#27).

tic 0.2.13.9006

• Support creating variables in tic.R by sourcing tic.R in a modifiable environment (#33).
• Replaced private arguments with an environment that keeps track of internal state, now the code from add_package_checks() can be copied to a tic.R file (#74).

tic 0.2.13.9005

• A failing step immediately fails the entire stage, subsequent steps are not run (#59).

tic 0.2.13.9004

• New get_public_key() and encode_private_key() moved from travis (#71, @pat-s).
• Add step_install_cran() and step_install_github() (#65, @pat-s).

tic 0.2.13.9003

• Added integration tests for package checks and deployment, covering various common cases (#62).
• Add integration test for deploying from a subdirectory.
• Remove orphan argument from step_push_deploy(), because there's no easy way to implement it reliably. If only a subdirectory is deployed to a separate branch (i.e., the path argument is set), orphan = TRUE is required.

tic 0.2.13.9002

• Better strategy for handling race conditions during deployment, new changes are no longer silently overwritten with step_push_deploy() (#45).
• Add integration test for package checks and race conditions (#62).
• Clarify error message upon step failure.
• add_package_checks() adds coverage checks only for non-interactive CIs.
• Add reference to use_tic() (#55).
• Document purpose of testing steps (#49).
• Allow only predefined stage names (#48).

tic 0.2.13.9001

• The pkgdown package is installed from CRAN.

tic 0.2.13.9000

• New subdir argument to step_push_deploy() and step_do_push_deploy(), allows restricting the set of files to be committed to Git (#42).

tic 0.2-13 (2018-02-01)

• New base64serialize() and base64unserialize() (#37).
• add_code_step() detects required packages also for complex expressions. Packages that need to be installed from GitHub still need to be installed manually (#36).
• step_rcmdcheck() now prints a summary, which also shows e.g. details on installation failures.
• New prepare_call argument to step_run_code() and add_code_step().

tic 0.2-12 (2017-06-29)

• Fix add_package_checks().

tic 0.2-11 (2017-06-29)

• add_package_checks() gains arguments that are passed to step_rcmdcheck().
• New step_setup_ssh() (#24).
• New add_code_step() (#21).
• New tic() to run all steps locally (#23).
• New add_package_checks() (#25).

tic 0.2-10 (2017-06-29)

• Document all exported functions and many classes (#8).
• step_add_to_drat() will also update the overview page if it exists.

tic 0.2-9 (2017-06-28)

• Fix get_slug() on AppVeyor to use APPVEYOR_REPO_NAME.
• New step_add_to_drat().
• Split step_push_deploy() into step_setup_push_deploy() and step_do_push_deploy().
• Better traceback output.
• Use "remotes" instead of "devtools".
• Reduce output after preparation (#5).
• New step_rcmdcheck().
• The deparsed code is used as step name (#5).

tic 0.2-8 (2017-06-17)

• An error occurring when running a step is printed in red (#5).

tic 0.2-7 (2017-06-13)

• New step_write_text_file() for creating arbitrary text files, including ~/.R/Makevars (#14).
• pkgdown documentation is now built for tags by default (#13).
• The "openssl" package is now only suggested, not imported.
• Removed step_run_covr() in favor of the new step_run_code() (#18).
• load_from_file() reloads the file from disk if its mtime changes (#11).
• All steps of a stage are run even in case of previous errors, but the stage still fails if at least one of its steps failed (#10).
• Adding to known hosts or installing a SSH keys now requires a non-interactive CI.
• New step_run_code() to run arbitrary code. If the code is a call with the pkg::fun(), notation, pkg is installed if missing (#1, #3). step_run_covr() remains for compatibility but is scheduled for removal.
• Color the start of each step in the log (#5).
• New step_add_to_known_hosts() to work around configuration problems on OS X (#16).
• Export runner methods for all stages defined in Travis CI and AppVeyor (#17).

tic 0.2-6 (2017-06-04)

• Technical release to sync default and production branches.

tic 0.2-5 (2016-11-27)

• Fix after_success() and deploy().
• Step names are now printed again.

tic 0.2-4 (2016-11-27)

• Use new DSL with the notion of stages with arbitrary names.
• New load_from_file() replaces get_xxx_steps()
• task_...() has been renamed to step_...()
• A task is now something like an ad-hoc step
• before_script() is now prepare_all_stages()
• TravisTask is now TicStep
• ci() is now exported
• If environment variable CI is undefined, use LocalCI with sensible inference of repository and branch.
• Stop if git exits with nonzero status.

tic 0.2-3 (2016-11-06)

• Install package for task_build_pkgdown task.

tic 0.2-2 (2016-11-05)

• DSL to define steps via step(), which are tasks with a branch and/or env var filter (#6).

tic 0.2-1 (2016-11-05)

• Support environment variables from both Travis and AppVeyor (#6).
• Add tests.
• Rudimentary support for multiple CI systems.
• Clean up dependencies.

tic 0.2 (2016-11-05)

Initial release.

• Rudimentary configuration based on task objects. A task object is a list/environment which contains at least the members check(), prepare() and run() -- functions without arguments, only check() needs to return a logical scalar. These can be subclasses of the new TravisTask R6 class, the package now contains six subclasses: HelloWorld, RunCovr, BuildPkgdown, InstallSSHKeys, TestSSH, and PushDeploy. The new methods of theses subclasses are exported as task_hello_world(), task_run_covr(), task_build_pkgdown() task_install_ssh_keys(), task_test_ssh(), and task_push_deploy(), respectively. The three functions before_script(), after_success() and deploy() accept a semicolon-separated list of task objects, which is by default taken from the TIC_AFTER_SUCCESS_TASKS and TIC_DEPLOY_TASKS environment variables. These functions call the prepare() and run() methods of the task objects if and only if the check() method returns TRUE (#42).

ropenscilabs/tic documentation built on Feb. 5, 2024, 5:06 p.m.