OT_joint: OT_joint()

View source: R/OT_joint.R

OT_jointR Documentation

OT_joint()

Description

The function OT_joint integrates two algorithms called (JOINT) and (R-JOINT) dedicated to the solving of recoding problems in data fusion using optimal transportation of the joint distribution of outcomes and covariates.

Usage

OT_joint(
  datab,
  index_DB_Y_Z = 1:3,
  nominal = NULL,
  ordinal = NULL,
  logic = NULL,
  convert.num = NULL,
  convert.class = NULL,
  dist.choice = "E",
  percent.knn = 1,
  maxrelax = 0,
  lambda.reg = 0,
  prox.X = 0.3,
  solvR = "glpk",
  which.DB = "BOTH"
)

Arguments

datab

a data.frame made up of two overlayed databases with at least four columns sorted in a random order. One column must be a column dedicated to the identification of the two databases ranked in ascending order (For example: 1 for the top database and 2 for the database from below, or more logically here A and B ...But not B and A!). One column (Y here but other names are allowed) must correspond to the target variable related to the information of interest to merge with its specific encoding in the database A (corresponding encoding should be missing in the database B). In the same way, one column (Z here) corresponds to the second target variable with its specific encoding in the database B (corresponding encoding should be missing in the database A). Finally, the input database must have at least one shared covariate with same encoding in A and B. Please notice that, if your data.frame has only one shared covariate (four columns) with missing values (because no imputation is desired) then a warning will appear and the algorithm will only run with complete cases.

index_DB_Y_Z

a vector of three indexes of variables. The first index must correspond to the index of the databases identifier column. The second index corresponds to the index of the target variable in the first database (A) while the third index corresponds to the column index related to the target variable in the second database (B).

nominal

a vector of column indexes of all the nominal (not ordered) variables (database identifier and target variables included if it is the case for them).

ordinal

a vector of column indexes of all the ordinal variables (database identifier and target variables included if it is the case for them).

logic

a vector of column indexes of all the boolean variables of the data.frame.

convert.num

indexes of the continuous (quantitative) variables. They will be automatically converted in ordered factors. By default, no continuous variables is assumed in the database.

convert.class

a vector indicating for each continuous variable to convert, the corresponding desired number of levels. If the length of the argument convert_num exceeds 1 while the length of convert_class equals 1 (only one integer), each discretization will count the same number of levels (quantiles).

dist.choice

a character string (with quotes) corresponding to the distance function chosen between: the euclidean distance ("E", by default), the Manhattan distance ("M"), the Gower distance ("G"), and the Hamming distance ("H") for binary covariates only.

percent.knn

the ratio of closest neighbors involved in the computations of the cost matrices. 1 is the default value that includes all rows in the computation.

maxrelax

the maximum percentage of deviation from expected probability masses. It must be equal to 0 (default value) for the JOINT algorithm, and equal to a strictly positive value for the R-JOINT algorithm.

lambda.reg

a coefficient measuring the importance of the regularization term. It corresponds to the R-JOINT algorithm for a value other than 0 (default value).

prox.X

a probability (betwen 0 and 1) used to calculate the distance threshold below which two covariates' profiles are supposed as neighbors. If prox.X = 1, all profiles are considered as neighbors.

solvR

a character string that specifies the type of method selected to solve the optimization algorithms. The default solver is "glpk".

which.DB

a character string indicating the database to complete ("BOTH" by default, for the prediction of Y and Z in the two databases), "A" only for the imputation of Z in A, "B" only for the imputation of Y in B.

Details

A. THE RECODING PROBLEM IN DATA FUSION

Assuming that Y and Z are two target variables which refered to the same target population in two separate databases A and B respectively (no overlapping rows), so that Y and Z are never jointly observed. Assuming also that A and B share a subset of common covariates X of any types (same encodings in A and B) completed or not. Merging these two databases often requires to solve a recoding problem by creating an unique database where the missing information of Y and Z is fully completed.

B. INFORMATIONS ABOUT THE ALGORITHM

As with the function OT_outcome, the function OT_joint provides a solution to the recoding problem by proposing an application of optimal transportation which aims is to search for a bijective mapping between the joint distributions of (Y,X) and (Z,X) in A and B (see (2) for more details). The principle of the algorithm is also based on the resolution of an optimization problem, which provides a solution γ (as called in (1) and (2)), estimate of the joint distribution of (X,Y,Z) according to the database to complete (see the argument which.DB for the choice of the database). While the algorithms OUTCOME and R_OUTCOME integrated in the function OT_outcome require post-treatment steps to provide individual predictions, the algorithm JOINT directly uses estimations of the conditional distributions (Y|Z,X) in B and (Z|Y,X) in A to predict the corresponding incomplete individuals informations of Y and/or Z respectively. This algorithm supposes that the conditional distribution (Y|X) must be identical in A and B. Respectively, (Z|X) is supposed identical in A and B. Estimations a posteriori of conditional probabilities P[Y|X,Z] and P[Z|X,Y] are available for each profiles of covariates in output (See the objects estimatorYB and estimatorZA). Estimations of γ are also available according to the chosen transport distributions (See the arguments gamma_A and gamma_B).

The algorithm R-JOINT gathers enrichments of the algorithm JOINT and is also available via the function OT_joint. It allows users to add a relaxation term in the algorithm to relax distributional assumptions (maxrelax>0), and (or) add also a positive regularization term (lamdba.reg>0) expressing that the transportation map does not vary to quickly with respect of covariates X. Is is suggested to users to calibrate these two parameters a posteriori by studying the stability of the individual predictions in output.

C. EXPECTED STRUCTURE FOR THE INPUT DATABASE

The input database is a data.frame that must satisfy a specific form:

  • Two overlayed databases containing a common column of databases identifiers (A and B, 1 or 2, by examples, encoded in numeric or factor form)

  • A column corresponding to the target variable with its specific encoding in A (For example a factor Y encoded in n_Y levels, ordered or not, with NAs in the corresponding rows of B)

  • A column corresponding to another target outcome summarizing the same latent information with its specific encoding in B (By example a factor Z with n_Z levels, with NAs in rows of A)

  • The order of the variables in the database have no importance but the column indexes related to the three columns previously described (ie ID, Y and Z) must be rigorously specified in the argument index_DB_Y_Z.

  • A set of shared common categorical covariates (at least one but more is recommended) with or without missing values (provided that the number of covariates exceeds 1) is required. On the contrary to the function OT_outcome, please notice, that the function OT_joint does not accept continuous covariates therefore these latters will have to be categorized beforehand or using the provided input process (see convert.num).

The function merge_dbs is available in this package to assist user in the preparation of their databases.

Remarks about the target variables:

  • A target variable can be of categorical type, but also discrete, stored in factor, ordered or not. Nevertheless, notice that, if the variable is stored in numeric it will be automatically converted in ordered factors.

  • If a target variable is incomplete, the corresponding rows will be automatically dropped during the execution of the function.

The type of each variables (including ID, Y and Z) of the database must be rigorously specified, in one of the four arguments quanti, nominal, ordinal and logic.

D. TRANSFORMATIONS OF CONTINUOUS COVARIATES

Continuous shared variables (predictors) with infinite numbers of values have to be categorized before being introduced in the function. To assist users in this task, the function OT_joint integrates in its syntax a process dedicated to the categorization of continuous covariates. For this, it is necessary to rigorously fill in the arguments quanti and convert.class. The first one informs about the column indexes of the continuous variables to be transformed in ordered factor while the second one specifies the corresponding number of desired balanced levels (for unbalanced levels, users must do transformations by themselves). Therefore convert.num and convert.class must be vectors of same length, but if the length of quanti exceeds 1, while the length of convert.class is 1, then, by default, all the covariates to convert will have the same number of classes (transformation by quantiles), that corresponds to the value specified in the argument convert.class. Notice that only covariates can be transformed (not target variables) and that any incomplete information must have been taken into account beforehand (via the dedicated functions merge_dbs or imput_cov for examples). Moreover, all the indexes informed in the argument convert.num must also be informed in the argument quanti. Finally, it is recommended to declare all discrete covariates as ordinal factors using the argument ordinal.

E. INFORMATIONS ABOUT DISTANCE FUNCTIONS AND RELATED PARAMETERS

Each individual (or row) of a given database is here characterized by a vector of covariates, so the distance between two individuals or groups of individuals depends on similarities between covariates according to the distance function chosen by user (via the argument dist.choice). Actually four distance functions are implemented in OT_joint to take into account the most frequently encountered situation (see (3)):

  • the Manhattan distance ("M")

  • the Euclidean distance ("E")

  • the Gower distance for mixed data (see (4): "G")

  • the Hamming distance for binary data ("H")

Finally, two profiles of covariates P_1 (n_1 individuals) and P_2 (n_2 individuals) will be considered as neighbors if dist(P_1,P_2) < prox.X \times max(dist(P_i,P_j)) where prox.X must be fixed by user (i = 1,…,n_1 and j = 1,…,n_2). This choice is used in the computation of the JOINT and R_JOINT algorithms. The prox.X argument influences a lot the running time of the algorithm. The greater, the more the value will be close to 1, the more the convergence of the algorithm will be difficult or even impossible.

Each individual i from A or B is here considered as a neighbor of only one profile of covariates P_j.

F. INFORMATIONS ABOUT THE SOLVER

The argument solvR permits user to choose the solver of the optimization algorithm. The default solver is "glpk" that corresponds to the GNU Linear Programming Kit (see (5) for more details). Moreover, the function actually uses the R optimization infrastructure of the package ROI which offers a wide choice of solver to users by easily loading the associated plugins of ROI (see (6)).

For more details about the algorithms integrated in OT_joint, please consult (2).

Value

A "otres" class object of 9 elements:

time_exe

running time of the function

gamma_A

estimate of γ for the completion of A. A matrix that corresponds to the joint distribution of (Y,Z,X) in A

gamma_B

estimate of γ for the completion of B. A matrix that corresponds to the joint distribution of (Y,Z,X) in B

profile

a data.frame that gives all details about the remaining P profiles of covariates. These informations can be linked to the estimatorZA and the estimatorYB objects for a better interpretation of the results.

res_prox

a proxim_dist object

estimatorZA

an array that corresponds to estimates of the probability distribution of Z conditional to X and Y in database A. The number of rows of each table corresponds to the total number of profiles of covariates. The first dimension of each table (rownames) correspond to the profiles of covariates sorted by order of appearance in the merged database. The second dimension of the array (columns of the tables) corresponds to the levels of Y while the third element corresponds to the levels of Z.

estimatorYB

an array that corresponds to estimates of the probability distribution of Y conditional to X and Z in database B. The number of rows of each table corresponds to the total number of profiles of covariates. The first dimension of each table (rownames) correspond to the profiles of covariates sorted by order of appearance in the merged database. The second dimension of the array (columns of the tables) corresponds to the levels of Z while the third element corresponds to the levels of Y.

DATA1_OT

the database A with the individual predictions of Z using an optimal transportation algorithm (JOINT) or R-JOINT

DATA2_OT

the database B with the individual predictions of Y using an optimal transportation algorithm (JOINT) or R-JOINT

Author(s)

Gregory Guernec, Valerie Gares, Jeremy Omer

otrecod.pkg@gmail.com

References

  1. Gares V, Dimeglio C, Guernec G, Fantin F, Lepage B, Korosok MR, savy N (2019). On the use of optimal transportation theory to recode variables and application to database merging. The International Journal of Biostatistics. Volume 16, Issue 1, 20180106, eISSN 1557-4679. doi:10.1515/ijb-2018-0106

  2. Gares V, Omer J (2020) Regularized optimal transport of covariates and outcomes in data recoding. Journal of the American Statistical Association. doi: 10.1080/01621459.2020.1775615

  3. Anderberg, M.R. (1973), Cluster analysis for applications, 359 pp., Academic Press, New York, NY, USA.

  4. Gower J.C. (1971). A general coefficient of similarity and some of its properties. Biometrics, 27, 623–637

  5. Makhorin A (2011). GNU Linear Programming Kit Reference Manual Version 4.47.http://www.gnu.org/software/glpk/

  6. Theussl S, Schwendinger F, Hornik K (2020). ROI: An Extensible R Optimization Infrastructure.Journal of Statistical Software,94(15), 1-64. doi: 10.18637/jss.v094.i15

See Also

merge_dbs, OT_outcome, proxim_dist, avg_dist_closest

Examples


### An example of JOINT algorithm with:
#-----
# - A sample of the database tab_test
# - Y1 and Y2 are a 2 outcomes encoded in 2 different forms in DB 1 and 2:
#   4 levels for Y1 and 3 levels for Y2
# - n1 = n2 = 40
# - 2 discrete covariates X1 and X2 defined as ordinal
# - Distances estimated using the Gower function
# Predictions are assessed for Y1 in B only
#-----

data(tab_test)
tab_test2 <- tab_test[c(1:40, 5001:5040), 1:5]


OUTJ1_B <- OT_joint(tab_test2,
                    nominal = c(1, 4:5), ordinal = c(2, 3),
                    dist.choice = "G", which.DB = "B"
)



### An example of R-JOINT algorithm using the previous database,
### and keeping the same options excepted for:
#-----
# - The distances are estimated using the Gower function
# - Inclusion of an error term in the constraints on
#   the marginals (relaxation term)
# Predictions are assessed for Y1 AND Y2 in A and B respectively
#-----

R_OUTJ1 <- OT_joint(tab_test2,
                    nominal = c(1, 4:5), ordinal = c(2, 3),
                    dist.choice = "G", maxrelax = 0.4,
                    which.DB = "BOTH"
)

### The previous example of R-JOINT algorithm with:
# - Adding a regularization term
# Predictions are assessed for Y1 and Y2 in A and B respectively
#-----

R_OUTJ2 <- OT_joint(tab_test2,
                    nominal = c(1, 4:5), ordinal = c(2, 3),
                    dist.choice = "G", maxrelax = 0.4, lambda.reg = 0.9,
                    which.DB = "BOTH"
)



### Another example of JOINT algorithm with:
#-----
# - A sample of the database simu_data
# - Y1 and Y2 are a 2 outcomes encoded in 2 different forms in DB A and B:
#   (3 levels for Y and 5 levels for Z)
# - n1 = n2 = 100
# - 3 covariates: Gender, Smoking and Age in a qualitative form
# - Complete Case study
# - The Hamming distance
# Predictions are assessed for Y1 and Y2 in A and B respectively
#-----

data(simu_data)
simu_data2 <- simu_data[c(1:100, 401:500), c(1:4, 7:8)]
simu_data3 <- simu_data2[!is.na(simu_data2$Age), ]

OUTJ2 <- OT_joint(simu_data3, prox.X = 0.10,
                  convert.num = 6, convert.class = 3,
                  nominal = c(1, 4:5), ordinal = 2:3,
                  dist.choice = "H", which.DB = "B"
)



OTrecod documentation built on Oct. 5, 2022, 5:06 p.m.