Getting Started with artma

In artma: Automatic Replication Tools for Meta-Analysis

Introduction

artma (Automatic Replication Tools for Meta-Analysis) is an R package designed to make meta-analysis accessible, reproducible, and comprehensive. This vignette will get you up and running quickly, showing you how to use artma for your meta-analysis needs.

Quick Start: Your First Analysis

The simplest way to use artma is to call the main function:

library(artma)
results <- artma()

In an interactive R session this opens the session hub, a menu you stay in for as long as you like. From it you:

1. Create or pick an options file - on your very first run artma guides you straight into creating one (the file stores all your analysis settings); once files exist, a picker of them opens instead, and you can always back out to the hub menu and decide later
2. Load your data - the file says where your dataset lives, and artma prepares it as soon as the file is loaded
3. Map your columns - artma recognizes common column names, or asks you
4. Choose methods - "Run methods" lists what your data supports
5. Run, adjust, run again - results accumulate across runs and are returned when you exit the hub

artma remembers the options file you last ran on: the next plain artma() call resumes on it automatically ("Resuming on "), and the "Options file" menu item is where you switch to a different one.

If you want artma to open the results folder for you at the end of a run, set open_results = TRUE. You can always access your results later manually using artma::results_open().

That's it! The function handles all the complexity behind the scenes.

Understanding the Core Concepts

Before diving deeper, it helps to understand three key concepts:

1. The artma() Function

artma() is the main entry point for the package. It orchestrates everything:

• Loading configuration from options files
• Preparing your data (reading, cleaning, validating)
• Running analytical methods (funnel plots, Bayesian analysis, etc.)
• Returning results in a structured format

You can use it in different ways:

# Fully interactive - prompts for everything
artma()

# Specify methods to run
artma(methods = c("funnel_plot", "bma"))

# Use a specific options file
artma(options = "my_analysis.yaml")

# Provide data directly (bypasses file reading)
artma(data = my_dataframe, methods = "effect_summary_stats")

2. Options Files

Options files are YAML configuration files that store all your analysis settings. Think of them as recipes for your meta-analysis:

• Data location - Where your dataset is stored
• Column mappings - Which columns contain effect sizes, standard errors, etc.
• Method parameters - Settings for each analysis method
• Output preferences - How you want results formatted

The key benefit: reproducibility. Save your options file, and you can rerun the exact same analysis anytime.

3. Methods

Methods are the analytical functions that perform specific meta-analysis tasks. Each method does something different:

• effect_summary_stats - Calculate overall effect sizes and confidence intervals
• funnel_plot - Visualize publication bias
• bma - Bayesian Model Averaging
• linear_tests - Test linear relationships
• nonlinear_tests - Test nonlinear relationships
• exogeneity_tests - Test for endogeneity
• p_hacking_tests - Detect p-hacking patterns
• maive - MAIVE estimator, correcting for publication bias, p-hacking, and spurious precision
• variable_summary_stats - Summary statistics for variables

You can run one method, multiple methods, or all methods in a single call. For a full description of every method, see the Methods Overview vignette.

Common Workflows

Workflow 1: Interactive Analysis (Recommended for Beginners)

This is the easiest way to get started:

# Step 1: Load the package
library(artma)

# Step 2: Run interactively
results <- artma()

# Step 3: Explore results
names(results)  # See which methods ran
results$effect_summary_stats  # Access specific results

During the interactive session, the hub menu lets you:

• Select or create an options file (and edit, duplicate or delete the ones you have)
• Specify your data file path
• Map column names (artma tries to auto-detect these)
• Choose which methods to run, as many times as you like

Workflow 2: Using an Existing Options File

Once you've created an options file, reuse it:

# Run with a specific options file
results <- artma(options = "my_analysis.yaml")

# Or specify the directory too
results <- artma(
  options = "my_analysis.yaml",
  options_dir = "~/my_meta_analyses/configs"
)

This is perfect when:

• You're rerunning a previous analysis
• You want to share your analysis configuration
• You're doing sensitivity analyses with different parameters

Workflow 3: Programmatic Analysis

For scripts and automation:

# Create options file programmatically
artma::options_create(
  options_file_name = "analysis_2025",
  user_input = list(
    "data.source_path" = "/path/to/data.csv",
    "data.columns" = list(
      effect = list(source_name = "effect_size"),
      se = list(source_name = "standard_error")
    ),
    "methods.effect_summary_stats.conf_level" = 0.95
  )
)

# Run analysis
results <- artma(
  options = "analysis_2025",
  methods = c("effect_summary_stats", "funnel_plot")
)

Workflow 4: Using Data Already in R

If your data is already loaded in R:

# Your data frame
my_data <- data.frame(
  effect = c(0.5, 0.3, 0.7, 0.4),
  se = c(0.1, 0.15, 0.12, 0.11),
  study = c("Study A", "Study B", "Study C", "Study D"),
  n_obs = c(100, 150, 120, 130)
)

# Run analysis directly
results <- artma(
  data = my_data,
  methods = "effect_summary_stats"
)

Note: When you provide data directly, you still need options for method parameters, but artma will handle data reading automatically.

Understanding Results

The artma() function returns a named list, where each element corresponds to a method that was run:

results <- artma(methods = c("effect_summary_stats", "funnel_plot"))

# Structure:
# results
# ├── effect_summary_stats  (results from effect summary statistics)
# └── funnel_plot           (results from funnel plot analysis)

The structure of each result depends on the method. Some methods return:

• Summary statistics (tables, means, confidence intervals)
• Test results (p-values, test statistics)
• Visualizations (plots, graphs)
• Model objects (for further analysis)

To explore results:

# See what methods ran
names(results)

# Access a specific result
effect_results <- results$effect_summary_stats

# The structure varies by method - use str() to explore
str(effect_results)

What a Run Leaves on Disk

A run that saves results writes them into its output directory (tables/ for the exported tables, graphics/ for the plots) together with a run.json manifest describing that run: when it happened, which options file and data source it used, the methods requested, run, skipped and failed, the effective seed, and the files it wrote.

The file list is recorded as the files are written, so it describes the run rather than everything that has piled up in the directory. That is what the HTML report uses to find each method's plots, and what the CLI reports in --json mode.

Every run also closes with a Run summary block on the console: the same facts, read from the same sources, so the manifest and what you saw scroll by never disagree.

run.json is overwritten by every run into the same output directory: it always describes the latest run, never a history. Runs driven by different options files already get their own output directory.

To keep every run instead of overwriting it, set output.run_subdirectories to TRUE. Each run then writes into its own timestamped subdirectory (<output.dir>/runs/2026-08-25_14-30-12/), with its own tables/, graphics/, manifest and report, and artma::results_dir() / artma::results_open() point at the latest one.

Choosing Methods

Discovering Available Methods

To see what methods are available:

artma::methods_list()

This prints all available methods to the console.

Selecting Methods

You have several options:

# Run specific methods
artma(methods = c("effect_summary_stats", "bma"))

# Run all methods
artma(methods = "all")

# Interactive selection (if methods not specified)
artma()  # Will prompt you to choose

Method Execution Order

Methods run in a predefined order (you don't need to worry about this, but it's good to know). If you specify multiple methods, they'll execute in the optimal sequence automatically.

Working with Options Files

Creating Options Files

Options files are created automatically when needed, but you can also create them explicitly:

# Interactive creation
artma::options_create()

# Programmatic creation
artma::options_create(
  options_file_name = "my_analysis",
  user_input = list(
    "data.source_path" = "/path/to/data.csv",
    "data.columns" = list(
      effect = list(source_name = "effect_size"),
      se = list(source_name = "standard_error")
    )
  )
)

Managing Options Files

# List all options files
artma::options_list()

# Copy an options file
artma::options_copy(
  options_file_name_from = "baseline.yaml",
  options_file_name_to = "sensitivity.yaml"
)

# Modify an options file
artma::options_modify(
  options_file_name = "my_analysis.yaml",
  options_to_modify = list(
    "methods.effect_summary_stats.conf_level" = 0.99
  )
)

# Validate an options file
artma::options_validate("my_analysis.yaml")

For detailed information about options files, see the Understanding Options Files vignette.

Data Requirements

Required Columns

Your dataset needs certain columns for artma to work. The minimum required columns are:

• Effect size - The effect you're analyzing (e.g., correlation, mean difference)
• Standard error - The uncertainty in the effect size
• Study identifier - A unique identifier for each study/observation

Column Mapping

artma uses flexible column mapping. Your columns don't need specific names - you just need to tell artma which column contains what. For example:

• Your effect column might be called beta, effect_size, r, or d
• Your standard error column might be called se, standard_error, or se_beta
• Your study column might be called study, paper_id, or observation

artma tries to auto-detect these mappings, but you can always specify them manually.

Supported Data Formats

artma can read data from:

• CSV files (.csv)
• Excel files (.xlsx, .xls)
• JSON files (.json)
• Stata files (.dta)
• R data files (.rds)

Data Preprocessing

artma automatically handles:

• Missing value detection and treatment
• Data type conversion
• Column standardization
• Outlier detection (with optional winsorization)

You control these behaviors through your options file.

Tips for Success

1. Start Simple

Begin with a single method to understand the workflow:

results <- artma(methods = "effect_summary_stats")

Once comfortable, add more methods.

2. Use Descriptive Options File Names

Name your options files clearly:

• charity_effects_2025.yaml - Better than config1.yaml
• sensitivity_analysis.yaml - Better than test.yaml

3. Save Your Options Files

Options files are your analysis recipes. Save them with your project for reproducibility.

4. Check Verbosity

Control how much information artma displays:

# In your options file or via options()
options(artma.verbose = 3)  # Default: informative
options(artma.verbose = 1)  # Minimal: errors only
options(artma.verbose = 4)  # Verbose: everything

5. Validate Before Running

If you're modifying options files manually, validate them:

artma::options_validate("my_analysis.yaml")

This catches errors before you run the analysis.

Getting Help

Documentation

• ?artma - Main function help
• ?artma::methods_list - List available methods
• ?artma::options_create - Create options files
• Vignettes - Detailed guides (like this one!)

Verbosity Levels

If something isn't working, increase verbosity:

options(artma.verbose = 4)  # Maximum detail
results <- artma()

This shows everything artma is doing, which helps diagnose issues.

Validation

When in doubt, validate:

# Validate options file
artma::options_validate("my_analysis.yaml")

# Check available methods
artma::methods_list()

# Check how artma reads and preprocesses your data
artma::data_preview(options = "my_analysis.yaml")

Next Steps

Once you're comfortable with the basics, read the options vignette for deeper configuration and try a few methods on your own data.

artma documentation built on Oct. 27, 2026, 9:06 a.m.