Nothing
tests/testthat/_snaps/design.md
In biometryassist: Functions to Assist Design and Analysis of Agronomic Experiments
CRD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "treatments 3\n"
[4] "Residual 16\n"
[5] "=============================================\n"
[6] "Total 19\n"
RCBD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 3\n"
[4] "---------------------------------------------\n"
[5] "treatments 10\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 43\n"
LSD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 3\n"
[4] "Column 3\n"
[5] "treatments 3\n"
[6] "Residual 6\n"
[7] "=============================================\n"
[8] "Total 15\n"
Split plot designs are supported
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " treatments 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " sub_treatments 3\n"
[11] " treatments:sub_treatments 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Split plot designs with names are supported
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " Water 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " N 3\n"
[11] " Water:N 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Crossed CRD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "A 2\n"
[4] "B 1\n"
[5] "A:B 2\n"
[6] "Residual 12\n"
[7] "=============================================\n"
[8] "Total 17\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "N 2\n"
[4] "Water 1\n"
[5] "N:Water 2\n"
[6] "Residual 12\n"
[7] "=============================================\n"
[8] "Total 17\n"
Crossed RCBD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "A 2\n"
[6] "B 1\n"
[7] "A:B 2\n"
[8] "Residual 10\n"
[9] "=============================================\n"
[10] "Total 17\n"
Crossed LSD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 5\n"
[4] "Column 5\n"
[5] "A 2\n"
[6] "B 1\n"
[7] "A:B 2\n"
[8] "Residual 20\n"
[9] "=============================================\n"
[10] "Total 35\n"
Nested designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 6\n"
[4] "Column 6\n"
[5] "treatments 6\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 48\n"
3 way factorial designs are possible
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "A 1\n"
[4] "B 1\n"
[5] "C 1\n"
[6] "A:B:C 1\n"
[7] "Residual 19\n"
[8] "=============================================\n"
[9] "Total 23\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "X 1\n"
[4] "Y 1\n"
[5] "Z 1\n"
[6] "X:Y:Z 1\n"
[7] "Residual 19\n"
[8] "=============================================\n"
[9] "Total 23\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "X 1\n"
[6] "Y 1\n"
[7] "Z 1\n"
[8] "X:Y:Z 1\n"
[9] "Residual 17\n"
[10] "=============================================\n"
[11] "Total 23\n"
Adding names to 3 way factorial designs works
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "X 1\n"
[6] "Y 1\n"
[7] "Z 1\n"
[8] "X:Y:Z 1\n"
[9] "Residual 17\n"
[10] "=============================================\n"
[11] "Total 23\n"
split plot allows a character vector for factor names
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " Water 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " Nitrogen 3\n"
[11] " Water:Nitrogen 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Output is produced when quiet = FALSE
Code
cat(des$satab)
Output
Source of Variation df
=============================================
treatments 10
Residual 33
=============================================
Total 43
Colour blind friendly plots work
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "treatments 10\n"
[4] "Residual 33\n"
[5] "=============================================\n"
[6] "Total 43\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 3\n"
[4] "---------------------------------------------\n"
[5] "treatments 10\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 43\n"
Try the biometryassist package in your browser
Any scripts or data that you put into this service are public.
biometryassist documentation built on Sept. 11, 2025, 9:11 a.m.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
CRD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "treatments 3\n"
[4] "Residual 16\n"
[5] "=============================================\n"
[6] "Total 19\n"
RCBD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 3\n"
[4] "---------------------------------------------\n"
[5] "treatments 10\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 43\n"
LSD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 3\n"
[4] "Column 3\n"
[5] "treatments 3\n"
[6] "Residual 6\n"
[7] "=============================================\n"
[8] "Total 15\n"
Split plot designs are supported
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " treatments 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " sub_treatments 3\n"
[11] " treatments:sub_treatments 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Split plot designs with names are supported
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " Water 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " N 3\n"
[11] " Water:N 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Crossed CRD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "A 2\n"
[4] "B 1\n"
[5] "A:B 2\n"
[6] "Residual 12\n"
[7] "=============================================\n"
[8] "Total 17\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "N 2\n"
[4] "Water 1\n"
[5] "N:Water 2\n"
[6] "Residual 12\n"
[7] "=============================================\n"
[8] "Total 17\n"
Crossed RCBD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "A 2\n"
[6] "B 1\n"
[7] "A:B 2\n"
[8] "Residual 10\n"
[9] "=============================================\n"
[10] "Total 17\n"
Crossed LSD designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 5\n"
[4] "Column 5\n"
[5] "A 2\n"
[6] "B 1\n"
[7] "A:B 2\n"
[8] "Residual 20\n"
[9] "=============================================\n"
[10] "Total 35\n"
Nested designs are supported
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Row 6\n"
[4] "Column 6\n"
[5] "treatments 6\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 48\n"
3 way factorial designs are possible
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "A 1\n"
[4] "B 1\n"
[5] "C 1\n"
[6] "A:B:C 1\n"
[7] "Residual 19\n"
[8] "=============================================\n"
[9] "Total 23\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "X 1\n"
[4] "Y 1\n"
[5] "Z 1\n"
[6] "X:Y:Z 1\n"
[7] "Residual 19\n"
[8] "=============================================\n"
[9] "Total 23\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "X 1\n"
[6] "Y 1\n"
[7] "Z 1\n"
[8] "X:Y:Z 1\n"
[9] "Residual 17\n"
[10] "=============================================\n"
[11] "Total 23\n"
Adding names to 3 way factorial designs works
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 2\n"
[4] "---------------------------------------------\n"
[5] "X 1\n"
[6] "Y 1\n"
[7] "Z 1\n"
[8] "X:Y:Z 1\n"
[9] "Residual 17\n"
[10] "=============================================\n"
[11] "Total 23\n"
split plot allows a character vector for factor names
[1] "Source of Variation df\n"
[2] "==================================================\n"
[3] "Block stratum 3\n"
[4] "--------------------------------------------------\n"
[5] "Whole plot stratum\n"
[6] " Water 1\n"
[7] "Whole plot Residual 3\n"
[8] "==================================================\n"
[9] "Subplot stratum\n"
[10] " Nitrogen 3\n"
[11] " Water:Nitrogen 3\n"
[12] " Subplot Residual 18\n"
[13] "==================================================\n"
[14] "Total 31\n"
Output is produced when quiet = FALSE
Code
cat(des$satab)
Output
Source of Variation df
=============================================
treatments 10
Residual 33
=============================================
Total 43
Colour blind friendly plots work
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "treatments 10\n"
[4] "Residual 33\n"
[5] "=============================================\n"
[6] "Total 43\n"
[1] "Source of Variation df\n"
[2] "=============================================\n"
[3] "Block stratum 3\n"
[4] "---------------------------------------------\n"
[5] "treatments 10\n"
[6] "Residual 30\n"
[7] "=============================================\n"
[8] "Total 43\n"
Try the biometryassist package in your browser
Any scripts or data that you put into this service are public.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
Embedding an R snippet on your website
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.