Extending dataReporter

knitr::opts_chunk$set(echo = TRUE, eval = TRUE)
library(dataReporter)
Sys.setenv(TZ="Europe/Copenhagen")  ## Set time zone to prevent warnings
Sys.getenv("TZ")

Introduction

The data documentation tools available in dataReporter allows for it to be utilized as an easy-to-use, self-contained package, as outlined in our accompanying article in the Journal of Statistical Software, 90(6), doi:10.18637/jss.v090.i06. However, this does not imply that dataReporter is not customizable: dataReporter was specifically built for including user-made extensions and this vignette is a tutorial into how one can write simple extensions that can be used in e.g. the makeDataReport() function from dataReporter.

Three steps of data documentation

In order to understand how different parts of the report creation can be customized, we will briefly dwell on the structure of the data reports made by dataReporter. Aside from a few pages dedicated to gaining an overview of the full dataset and what was done to document its current state, the report sequentially presents information for each variable. More specifically, each variable is presented with one of the two sets of information:

  1. The result of a single eligibility check (referred to as a pre-check below)
  2. The results of the three canonical dataReporter steps:
    • Summarize: Produces a summary table
    • Visualize: Produces a distribution visualization
    • Check: Performs and lists the results of a number of checks

The first option will be used for variables that do not pass the initial pre-checks. These are checks that are performed in order to identify variables that are not eligible for detailed documentation for one reason or another. The default pre-checks used in makeDataReport() are

If any of these checks finds a problem, the relevant problem will be mentioned in the report and the variable will not be exposed to further documentation steps. If the pre-checks do not flag a variable, on the other hand, the variable will be subjected to the three SVC (summarize, visualize, check) steps mentioned above. In the SVC-steps, makeDataReport() calls a number of so-called summaryFunctions, visualFunctions and checkFunctions, with different choices of functions depending on the class of the variable. The customizability features of dataReporter essentially comes down to writing such summaryFunctions, visualFunctions and checkFunctions.

This vignette consists of three parts. First, we describe how new summaryFunctions, visualFunctions and checkFunctions can be made by describing the requirements for their structures that must be fulfilled in order for them to be used in a makeDataReport() call. Secondly, we turn to a worked example of how to write custom made functions in practice. Here, we define and showcase six new SVC functions. Lastly, a built-in dataset about art masterpieces, artData, is documented using the custom-made functions and the thereby obtained data report is included.

In this vignette, we focus on the report creation tools of dataReporter. However, it should be emphasized that by following the guidelines presented here, the user-defined summaryFunctions, visualFunctions and checkFunctions will also be fully integrated with the interactive mode of dataReporter.

Function templates

In order to construct a summary, visual or check function, one needs to create a new function with a specific structure. This can be done with different levels of strictness. If the new custom function is only to be used as part of the SVC steps in makeDataReport(), then only the input/output structure of the function needs special attention. However, new user-defined functions can also be registered locally to be part of the full machinery of dataReporter, and when this is done, the functions will be recognized and behave in the same way as the built-in functions in dataReporter. The presentation below is given in the format of function templates, written in pseudo-code. These templates are designed for getting the full functionality, but note that the table below serves as a reference to the minimal requirements for each function type, while also presenting the "full" versions.

For each of the three function types, we have provided an S3 object class. This was done in order to facilitate obtaining overviews of all available options for summaries, visuals and checks through calls to the three functions allSummaryFunctions(), allVisualFunctions() and allCheckFunctions(). Similarly, we have also provided specific output classes for the summary- and check outputs, for which convenient printing methods are available.

This table summarizes the minimal and recommended structures for summary-, visual- and check functions:

| | summaryFunction | visualFunction | checkFunction | |---|----------------------|---------------------|--------------------| | Input (required) | v - A variable vector.
... - Additional arguments passed to the function. | v - A variable vector.
vnam - The variable name (as character string).
doEval - A logical (TRUE/FALSE) controlling the output type of the function. | v - A variable vector
nMax - An integer (or Inf), controlling how many problematic values are printed, if relevant
... - Additional arguments passed to the function.| | Input (optional) | maxDecimals - The number of decimals printed in outputted numerical values. | | maxDecimals - The number of decimals printed in outputted numerical values.| |Purpose | Describe some aspect of the variable, e.g., a central value, its dispersion or level of missingness. | Produce a distribution plot. | Check a variable for a specific issue and, if relevant, identify the values in the variable that cause the issue. | | Output (required) | A list with entries:
feature - A label for the summary value (as character string);
result - The result of the summary (as character string). | A character string with R code for producing a plot. This code should be standalone, i.e., should include the data if necessary. | A list with entries:
problem - A logical identifying whether an issue was found;
message - A character string (possibly empty) describing the issue that was found, properly escaped and ready for use with rmarkdown. | | Output (recommended) | A summaryResult object, i.e., an attributed list with entries feature, result and value, the latter being the values from result in their original format). | If doEval is TRUE: A plot that is opened by the graphic device in R.
If doEval is FALSE: A text string with R code, as described above. | A checkResult object, i.e., an attributed list with entries problem, message and problemValues, the latter being either NULL or the problem causing values, as they were found in v, whichever is relevant. | | Tools available for producing the function | summaryResult() | | messageGenerator()
checkResult()|

Writing a summaryFunction

As mentioned above, dataReporter provides a dedicated class for summaryFunctions. However, this does not imply that they are particularly advanced or complicated to create; in fact, they are nothing but regular functions with a particular input/output-structure. Specifically, they all follow the template below:

mySummaryFunction <- function(v, ...) {
  val <- [result of whatever summary we are doing]
  res <- [properly escaped version of val]
  summaryResult(list(feature = "[Feature name]", result = res,
                     value = val))
}

The last function called here, summaryResult(), changes the class of the output, thereby making a print() method available for it. Note that v is an input vector and that res should be either a character string or something that will be printed as one. In other words an integer would be allowed for res, but a matrix will not. Note that, strictly speaking, only one of the two elements value and result is needed in order to create a summaryResult. If result is provided, this will be printed as the summary result. However, if only value is provided, the summaryResult() function will try to convert it to a character string itself. This might be more or less difficult to do in a reasonable way, so therefore, we really do recommend to provide this conversion yourself by both returning a result and a value.

Though a lot of different things can go into the summaryFunction template, we recommend only using it for summarizing the features of a variable, and leaving tests and checks for the checkFunctions (presented below).

Adhering to the template above is sufficient for using the freshly made mySummaryFunction() in makeDataReport(), but we recommend adding the new function to the overview of all summary functions by converting it to a proper summaryFunction object. This is done by calling the summaryFunction() creator with the user-defined function as the first argument, and additional arguments description (an explanatory text which will be added to the attributes of the function), and classes (a vector of variable classes the user-defined function is intended to be applied to, also stored as an attribute). In other words, a call following the template below should be made:

mySummaryFunction <- summaryFunction(mySummaryFunction,
  description = "[Text describing what the summaryFunction does]",
  classes = c([vector of data types that the function is intended
  for]))

which adds the new function to the output of an allSummaryFunctions() call. If mySummaryFunction is constructed as an S3 generic function with associated methods, the call to summaryFunction() will automatically produce a vector of the names of the classes for which the function can be called. If mySummaryFunction() is not an S3 generic and classes is left unspecified, the attribute will simply be left empty. Note that the helper function allClasses() might be useful for filling out the classes argument, as it simply lists all supported classes in dataReporter:

allClasses()

Writing a visualFunction

visualFunctions are the functions that produce the figures in a dataReporter output document. Writing a visualFunction is slightly more complicated than writing a summaryFunction. This is due to the fact that visualFunctions need to be able to output standalone code for plots in order for makeDataReport() to build standalone rmarkdown files. We recommend using the following structure (again shown as pseudo code):

myVisualFunction <- function(v, vnam, doEval) {
  thisCall <- call("[the name of the function used to produce the plot]",
    v, [additional arguments for the plotting function])
  if (doEval) {
    return(eval(thisCall))
  } else return(deparse(thisCall))
}

In this function, v is the variable to be visualized, vnam is its name (which should generally be passed to title or main arguments in plotting functions) and doEval controls whether the output is a plot (if TRUE) or a character string of standalone code for producing a plot (if FALSE). Implementing the doEval = TRUE setting is not strictly necessary for a visualFunction's use in makeDataReport(), but it makes it easier to assess what visualization options are available, and obviously, it is crucial for interactive usage of myVisualFunction(). In either case, it should be noted that all the parameters listed above, v, vnam and doEval, are mandatory, so they must be left as is, even if they are not in use (c.f., the table).

As with the summary function, we call visualFunction() to register our newly created function:

myVisualFunction <- visualFunction(myVisualFunction,
  description = "[Some text describing the visualFunction]",
  classes = c([data types that this function is intended for]))
  )

Now, myVisualFunction() will be available in a allVisualFunctions() call, just like the two build-in visualFunctions, standardVisual and basicVisual.

Writing a checkFunction

The last, but perhaps most important, dataReporter function type is the checkFunction. These are the functions that flag issues in the data in the check step and/or control the overall flow of the data documenting process in the pre-check stage. A checkFunction follows one of two overall structures, depending on the type of check. Either, it tries to identify problematic values in the variable (as e.g., identifyMissing() does), or it performs a check concerning the variable as a whole (e.g., the functions used for pre-checks and the function identifyNums()). We present templates for both types of checkFunctions below separately, but it should be emphasized that formally, they belong to the same class.

First, a template for the full-variable check function type, where we first define the function and subsequently register it as a check function using checkFunction():

myFullVarCheckFunction <- function(v, ...) {
  [do your check]
  problem <- [is there a problem? TRUE/FALSE]
  message <- "[message describing the problem, if any]"
  checkResult(list(problem = problem,
    message = message,
    problemValues = NULL))
}

myFullVarCheckFunction <- checkFunction(myFullVarCheckFunction,
  description = "[Some text describing the checkFunction]",
  classes = c([the data types that this function is intended to be used for])
  )

Again, as with summaryFunctions and visualFunctions, the change of function class by use of checkFunction() is not strictly necessary. Note however, that if myFullVarCheckFunction is to be used in the summarize/visualize/check steps in makeDataReport(), the description attribute will be printed in the overview table in the Data report overview part of the report.

If problematic values are to be identified, the template from above should be expanded to follow a slightly more complicated structure (again shown as pseudo-code):

myProbValCheckFunction <- function(v, nMax, maxDecimals, ...) {
  [do your check]
  problem <- [is there a problem? TRUE/FALSE]
  problemValues <- [vector of values in v that are problematic]
  problemStatus <- list(problem = problem,
                        problemValues = problemValues)

  problemMessage <- "[Message that is printed prior to listing
                     problem values in the dataReporter output,
                     ending with a colon]"

  outMessage <- messageGenerator(problemStatus, problemMessage, nMax)

  checkResult(list(problem = problem,
    message = outMessage,
    problemValues = problemValues))
}

myProbValCheckFunction <- checkFunction(myProbValCheckFunction,
  description = "[Some text describing the checkFunction]",
  classes = c([the data types that this function is intended to be used for])
)

One comment should be devoted to the helper function, messageGenerator(). This function's sole purpose is aiding consistent styling of all checkFunction messages. The function simply pastes together the problemMessage and the problemValues, with the latter being quoted and sorted alphabetically. If the nMax argument to messageGenerator() is not Inf, only the first nMax problem values will be pasted onto the message, accompanied by a comment about how many problem values were left out (if any). Note that printing quotes in rmarkdown requires an extensive amount of character escaping, so opting for messageGenerator() really is the easiest solution.

In the template above, the argument maxDecimals is not in use. This argument should be used to round off the problemValues passed to messageGenerator(), if they are numerical. This can be done by adding an extra line of code after defining problemStatus in the template above:

myProbValCheckFunction <- function(v, nMax, maxDecimals, ...) {
  [... more lines of code here ...]
  problemStatus <- list(problem = problem,
    problemValues = problemValues)

  if (!is.null(problemValues)) {
    problemStatus$problemValues <- round(problemValues, maxDecimals)
  }
  [... more lines of code here ...]
}

Now, problematic values will be rounded in the outputted message, while they will still appear in their original format under the entry problemValues in the returned object.

A worked example

As an example, we now create some new functions and show both how they can be used interactively and how they can be integrated with the makeDataReport() function. These new functions are:

These functions are defined in turn below, and afterwards, an example of how they can be called from makeDataReport() is provided.

summaryFunction examples: countZeros() and meanSummary()

We start by defining two summary functions. For both functions, we use summaryResult() for creating the function output and then we use summaryFunction() in order to add the functions to the output from a allSummaryFunctions() call.

countZeros --- a simple summaryFunction

First, we will make a summary function that counts how many times the value 0 occurs in a variable - either as a character or as a numeric value. We define this summaryFunction in the following lines of code:

countZeros <- function(v, ...) {
  val <- length(which(v == 0))
  summaryResult(list(feature = "No. zeros", result = val, value = val))
}

As this function computes an integer (the number of zeros), there is no difference between the elements $result and $value. If, on the other hand, the result had been a character string, extra formatting might be required in the $result entry (such as escaping of quotation marks), and in this scenario, the two entries would have differed.

Because the result is returned as a summaryResult object, a printing method is automatically called when countZeros() is used interactively:

#Called on a numeric variable
countZeros(c(rep(0, 5), 1:100))

#Called on a character variable
countZeros(c(rep(0, 5), letters))

Note that letters is a globally defined vector consisting of all the letters in the (English) alphabet as characters.

We change the class of countZeros() in order to make it appear in allSummaryFunctions() calls. Moreover, we wish to emphasize that the function is not intended to be called on all variable types, as zeros have different roles in Date and logical variables:

countZeros <- summaryFunction(countZeros,
  description = "Count number of zeros",
  classes = c("character", "factor", "integer",
              "labelled", "numeric"))

Please note that this is just meta-information: The function can still be called on Date and logical variables, but then the user will know that they are acting against the recommendations of the programmer. In order to control what input variables can actually be used, we suggest writing the function as an S3 generic with methods for some, but not all, data classes, as the next example will show.

meanSummary --- an S3 generic summary function

In this example, we will use the concept of method dispatch and generic S3 functions in order to control what data classes a summaryFunction can be used for. If you are not familiar with S3 classes, we refer to Hadley Wickham's Advanced R for a excellent, though somewhat computer science heavy, introduction to object oriented programming in R.

We would like to define a very simple summary function that computes the arithmetic mean of a variable. This is of course only meaningful for numerical variables, i.e. variables with the classes numeric,integerorlogical`. Therefore, we will use the S3 framework to force users to only call our function on these appropriate classes.

First, we define the generic function:

meanSummary <- function(v, maxDecimals = 2) {
  UseMethod("meanSummary")
}

This is just an empty shell: All it does is to say that if the function meanSummary is called, R should look for class-specific methods called meanSummary. However, no such methods are defined yet, and therefore an error is produced if the function is called:

meanSummary(1)

We now define a helper function that input a variable v, removes NAs, computes the mean and outputs this mean as a proper summaryResult:

meanSummaryHelper <- function(v, maxDecimals) {
  #remove missing observations
  v <- na.omit(v)

  #compute mean and store "raw" output in `val`
  val <- mean(v)

  #store printable (rounded) output in `res`
  res <- round(val, maxDecimals)

  #output summaryResult
  summaryResult(list(feature = "Mean", result = res, value  = val))
}

and we then assign this function as the meanSummary method used for logical, numeric and integer variables:

#logical
meanSummary.logical <- function(v, maxDecimals = 2) {
  meanSummaryHelper(v, maxDecimals)
}

#numeric
meanSummary.numeric <- function(v, maxDecimals = 2) {
  meanSummaryHelper(v, maxDecimals)
}

#integer
meanSummary.integer <- function(v, maxDecimals = 2) {
  meanSummaryHelper(v, maxDecimals)
}

and now we can see what happens when the function is called on supported - and non-supported - variables:

#called on a numeric variable (supported)
meanSummary(rnorm(100))

#called on a character variable - produces error as there is
#no method for characters
meanSummary(letters)

Finally, we will make it a proper summaryFunction. Because we defined meanSummary() as an S3 generic function, we do not have to specify which classes it should be called up - summmaryFunction() will automatically look up what classes have methods and are thus supported:

meanSummary <- summaryFunction(meanSummary,  
                               description = "Compute arithmetic mean")

And now it appears - together with countZeros - in a allSummaryFunctions() call:

allSummaryFunctions()

visualFunction examples: mosaicVisual() and prettierHist()

We will now define two different visual functions. The first one is a graphics-based function, while the second one is ggplot2-based.

mosaicVisual --- a new visualFunction for categorical data

In the base R package graphics, a function which produces mosaic plots is available. It is intended to be called on one-way tables, as. e.g. returned from table(). This function is named mosiacplot and results in the following type of plots:

#construct a character variable by sampling 100 values that are 
#either "a" (probability 0.3) or "b" (probability 0.7):
x <- sample(c("a", "b"), size = 100, replace = TRUE,
                   prob = c(0.3, 0.7))

#draw a mosaic plot of the distribution:
mosaicplot(table(x))

As evident from the figure, a mosaic plot consists of several rectangles, one for each category in the data, and the area of each such rectangle is proportional to the proportion of the data that takes that value - much like a pie chart. We intend to use this function as part of a new visualization function. We will define the new function such that it gets the full dataReporter functionality. This can be done using the following code which sets up the call using the existing function mosaicplot().

mosaicVisual <- function(v, vnam, doEval) {
  #Define a (unevaluated) call to mosaicplot
  thisCall <- call("mosaicplot", table(v), main = vnam, xlab = "")

  #if doEval is TRUE, evaluate the call, thereby producing a plot
  #if doEval is FALSE, return the deparsed call
  if (doEval) {
    return(eval(thisCall))
  } else return(deparse(thisCall))
}

This function can now be called directly or used in makeDataReport(), as will presented in an example below. Depending on the doEval argument, either a text string with code or a plot is produced. We can for instance inspect the code for the plot produced in the above by calling mosaicVisual() on x with doEval = FALSE:

mosaicVisual(x, "Variable x", doEval = FALSE)

Even though mosaicVisual(), as written above, follows the style of a visualFunction, it is not yet truly one and therefore, it will not appear in an allVisualFunctions() call. In order to get this functionality, we need to change its object class. This can be done by writing

mosaicVisual <- visualFunction(mosaicVisual,
                               description = "Mosaic plots using graphics",
                               classes = setdiff(allClasses(), 
                                                 c("numeric", 
                                                   "integer", 
                                                   "Date")))

Here, we use the function allClasses() to quickly obtain a vector of all the seven variable classes supported by dataReporter, and we use setdiff() to choose all classes except the numeric, integer and Date classes, as the mosaic plot is most suited for categorical data. Note that if mosaicVisual() were an S3 generic function, this argument could have been left as NULL and then the classes for which methods are available would be added automatically by visualFunction().

prettierHist() --- a customized ggplot2 histogram

Next, we will define a ggplot2-based plotting function. We will simply make a slight alteration of the looks of the typical ggplot2 histogram, but it serves of a general example of how ggplot2 visual functions can be built.

But first, we define a helper function that does the actual plotting. This makes it simpler to write a visual function using the call()/eval() structure presented in the above, thereby making it easy to provide a visual function that can both be used interactively (with doEval = TRUE) and in makeDataReport() (with doEval = FALSE). The helper function is defined like this:

library(ggplot2)

prettierHistHelper <- function(v, vnam) {
  #define a ggplot2 histogram 
  p <- ggplot(data.frame(v = v), aes(x = v)) + 
          geom_histogram(col = "white", bins = 20) +
          xlab(vnam)

  #return the plot
  p
}

We use col = "white" to add white contours around the bars in the histogram. Let's look at an example of this function called on a variable consisting of 100 random draws from the standard normal distribution:

prettierHistHelper(rnorm(100), "Standard normal variable")

Now, we can define a visual function that calls prettierHistHelper():

#define visualFunction-style prettierHist()-function
prettierHist <- function(v, vnam, doEval = TRUE) {
  #define the call
  thisCall <- call("prettierHistHelper", v = v, vnam = vnam)

  #evaluate or deparse
  if (doEval) {
    return(eval(thisCall))
  } else return(deparse(thisCall))
}

#Make it a proper visualFunction:
prettierHist <- visualFunction(prettierHist, 
    description = "ggplot2 style histogram with contours",
    classes = c("numeric", "integer", "logical", "Date"))

We specify that the prettierHist() should only be called on variables of the classes numeric, integer, logical or Date, as is reasonable for a histogram. And we will now find our new visualFunctions in a allVisualFunctions()-call:

allVisualFunctions()

checkFunction examples: isID() and identifyColons()

Next up is two new check functions. First, we will define a check function that is intended for use in the pre-check stage, i.e. used for screening variables for eligibility for the summarize/visualize/check-steps. This will be a function that checks the entries in a variable for a certain structure which often used in ID type variables and we will name the new function isID(). Afterwards, we will define a check function that looks for : in categorical variables, as these might be the result of unintended interactions introduced in the data wrangling process.

isID --- a new checkFunction without problem values

First, let's define the isID() function. As this function is not supposed to list problematic values, it falls within the category of checkFunctions represented by myFullVarCheckFunction() above. We do not particularly wish to use this function interactively, so we will stick to the minimal requirements of a checkFunction used in check() (see the overview table in the beginning of this vignette). We are interested in checking whether variables that are neither logical nor Date are restricted to a certain structure. In this example, we simply check if the all observations, when converted to characters, have the same lengths and that length is at least 8. This might be regarded as minimal restrictions for a lot of different ID type information, including US social security numbers and credit card numbers, and of course, a more specific ID check function can be built as an expansion of isID(). We define the function:

isID <- function(v, nMax = NULL, ...) {
  #define minimal output. Note that this is not a
  #proper checkResult
  out <- list(problem = FALSE, message = "")

  #only perform check if the variable is neither a logical nor a Date
  if (class(v) %in% setdiff(allClasses(), c("logical", "Date"))) {

    #count the number of characters in each entry of v
    v <- as.character(v)
    lengths <- c(nchar(v))

    #check if all entries of v have at least 8 characters
    #and whether they all have the same length. If so,
    #flag as a problem.
    if (all(lengths >= 8) & length(unique(lengths)) == 1) {
      out$problem <- TRUE
      out$message <- "Warning: This variable seems to contain ID codes."
    }
  }

  #return result of the check
  out
}

This is essentially all we need to do in order to include this function as a pre-check-function in makeDataReport(). However, we should note that e.g. not using checkResult() for the output means that it does not have a convenient print() method available; now, the output just really is displayed as a list:

#define 9-character ID variable:
idVar <- c("1234-1233", "9221-0289",
           "9831-1201", "6722-1243")

#check for ID resemblance for the ID variable
isID(idVar)

#check for ID resemblance for a non-ID variable
isID(rnorm(10))

As we have not changed the class of this check function to be a checkFunction, it should be noted that it will not show up in the output of a allCheckFunctions() call.

identifyColons --- a new checkFunction with problem values

The last function we will define in this vignette is identifyColons(). We define it using the helper function messageGenerator() to obtain a properly escaped message, and we use checkResult() to make its output print neatly. As mentioned above, the purpose of this check function is to identify variables where colons appear, as they might have been introduced by mistake when loading or wrangling the data. In the code we use regular expressions through the gregexpr() function to identify colons that appear in between other characters:

identifyColons <- function(v, nMax = Inf, ... ) {
  #remove duplicates (for speed) and missing values:
  v <- unique(na.omit(v))

  #Define the message displayed if a problem is found:
  problemMessage <- "Note that the following values include colons:"

  #Initialize the problem indicator (`problem`) and 
  #the faulty values (`problemValues`)
  problem <- FALSE
  problemValues <- NULL

  #Identify values in v that has the structure: First something (.), 
  #then a colon (:), and then something again (.), i.e. values with
  #non-trailing colons: 
  problemValues <- v[sapply(gregexpr(".:.", v),
                            function(x) all(x != -1))]

  #If any problem values are identified, set the problem indicator
  #accordingly
  if (length(problemValues) > 0) {
    problem <- TRUE
  }

  #Combine the problem indicator and the problem values
  #into a problem status object that can be passed to 
  #the messageGenerator() helper function that will
  #make sure the outputted message is properly escaped
  #for inclusion in the dataReporter report
  problemStatus <- list(problem = problem, 
                        problemValues = problemValues)
  outMessage <- messageGenerator(problemStatus, problemMessage, nMax)

  #Output a checkResult with the problem, the escaped
  #message and the raw problem values.
  checkResult(list(problem = problem,
                   message = outMessage,
                   problemValues = problemValues))
}

And we change the class of the function so that it becomes a proper checkFunction object:

identifyColons <- checkFunction(identifyColons,
    description = "Identify non-trailing colons",
    classes = c("character", "factor", "labelled"))

Note, that for checkFunctions, the description provided in a checkFunction() call will appear in the report produced by makeDataReport() (in the Data cleaning summary section), so for this type of function, the change of class is not only done for the sake of the allCheckFunctions() output.

Let's see the results of identifyColons() when used interactively on a potentially problematic variable:

#define a variable as an interaction between between two factors:
iaVar <- factor(c("a", "b", "a", "c")):factor(c(1, 2, 3, 4))

#Check iaVar for colons:
identifyColons(iaVar)

And when used on a variable that does not contain colons:

identifyColons(letters)

Calling the new summarize/visualize/check functions from makeDataReport()

Now, we are ready to use all the new functions in a makeDataReport() call. We wish to produce a report that utilizes the newly defined functions in the following way:

We will make a data report for the built-in dataset artData that is based on the Master Works of Art data from Data Explorer. The dataset contains 200 observations (corresponding to paintings) of 11 variables, describing different properties of the paintings and their artists. The first 5 observations look like this:

data(artData)
head(artData, 5)

The 11 variables of artData can be summarized as follows:

The options for the data report described above are specified as follows:

makeDataReport(artData,
  #add extra precheck function         
  preChecks = c("isKey", "isSingular", "isSupported", "isID"),

  #Add the extra summaries - countZeros() for character, factor, 
  #integer, labelled and numeric variables and meanSummary() for integer, 
  #numeric and logical variables:
  summaries = setSummaries(
    character = defaultCharacterSummaries(add = "countZeros"),
    factor = defaultFactorSummaries(add = "countZeros"),
    labelled = defaultLabelledSummaries(add = "countZeros"),
    numeric = defaultNumericSummaries(add = c("countZeros", "meanSummary")),
    integer = defaultIntegerSummaries(add = c("countZeros", "meanSummary")),
    logical = defaultLogicalSummaries(add =  c("meanSummary"))
  ),

  #choose mosaicVisual() for categorical variables,
  #prettierHist() for all others:
  visuals = setVisuals(
    factor = "mosaicVisual",
    numeric = "prettierHist",
    integer = "prettierHist", 
    Date = "prettierHist"
  ), 

  #Add the new checkFunction, identifyColons, for character, factor and 
  #labelled variables:
  checks = setChecks(
    character = defaultCharacterChecks(add = "identifyColons"),
    factor = defaultFactorChecks(add = "identifyColons"),
    labelled = defaultLabelledChecks(add = "identifyColons")
  ),

  #overwrite old versions of the report, render to html and don't 
  #open the html file automatically:
  replace = TRUE, 
  output = "html",
  open = FALSE
)

We have chosen the output to be html (output = "html") so that it can easily be included in this vignette by use of the includeHTML() function from the htmltools package. We have set open = FALSE so that the outputted html file is not opened automatically. The outputted report is available at the end of this vignette.

A dataReporter report with user-defined functions: Documenting artData

We include the report documenting artData (this is only shown if pandoc is available to generate it):

htmltools::includeHTML("dataReporter_artData.html")


Try the dataReporter package in your browser

Any scripts or data that you put into this service are public.

dataReporter documentation built on Nov. 11, 2021, 9:06 a.m.