edecob: Event DEtection using COnfidence Bounds

In edecob: Event Detection Using Confidence Bounds

Event DEtection using COnfidence Bounds

Description

Calculate a smoother of longitudinal data of the same measure and bootstrap the errors of the autoregressive model fitted on the smoother to form simultaneous confidence bounds of a certain level (mathematical details below). Define an event if the simultaneous confidence bound is within a chosen interval for a predefined amount of time. When data from multiple sources is provided, the calculation will be done separately for each source.

Usage

edecob(
  data,
  smoother = "mov_med",
  resample_method = "all",
  min_change_dur = 84,
  conf_band_lvl = 0.95,
  bt_tot_rep = 100,
  time_unit = "day",
  detect = "below",
  detect_factor = 1,
  bline_period = 14,
  ...
)

Arguments

data	A data frame in long format containing the data for which events is to be detected. This means that each measurement corresponds to a row and the columns are (in order): source (the device or person from which the data was collected), point in time, and measurement value. If custom detection bounds are chosen, the folloing two columns must be added: lower detection bound, and upper detection bound. The source is expected to be a string; the time point are integers; measurements, and detection bounds are expected to be numerical. The detection bounds are in absolute value in the same unit as the values and each is expected to be identical for the same source. In case detection is wanted for a one sided change (e.g. give an event if the confidence bounds drop below a threshold) then the upper or lower detection bound can be chosen to be Inf or -Inf respectively.
smoother	A string specifying which smoother is to be used. Use mov_med for the moving median. When using the moving median, the parameter med_win must be given to specify the size of the window over which the moving median is to be taken. Defaults to the moving median.
resample_method	A string that determines how to resample the errors of the autoregression for the bootstrap. Default is all, meaning that the epsilon of a certain time point are resampled from all time points. past only considers epsilon corresponding to a time point prior to the one being resampled. window resamples the epsilon from the window given by resample_win.
min_change_dur	The minimal number of time units that the confidence bounds need to stay inside the detection bounds in order for an event to be detected. Defaults to 84, i.e. 12 weeks.
conf_band_lvl	The confidence level for the simultaneous confidence bands. Defaults to 0.95. When detection of events using only the smoother is desired, conf_band_lvl can be chosen to be 0.
bt_tot_rep	The number of iterations for the bootstrap computation. Because of run time, it is recommended to keep this number below 500. Defaults to 100.
time_unit	A string containing the unit of time used, in singular form. Defaults to day.
detect	A string specifying how the detection bounds are to be chosen. below, above, and custom can be chosen. below detects decreases in value, above detects increases in value, and custom can be used to manually add detection bounds for each subject. When above or below are used, the detection bound will be x percent above or below the median of the first y days, where x is detect_factor and y is detect period.
detect_factor	A number specifying the factor by which the median of the fist bline_period days is to be multiplied to obtain the detection bounds. E.g. 0.9 sets the detection bound 10 percent below the said median.
bline_period	A number specifying the number of time units from which data should be taken to calculate the median to obtain the detection bounds.
...	Additional parameters to be given to the function. Possible parameters for the model are order and min_pts_in_win. For the moving median, a med_win is required. When resampling from window, a resample_win may be given. The parameter min_pts_in_win defines the minimal number of measurements required to be in the time window for the median to be calculated. Defaults to 1. If the parameter order is given, that number will be the (maximal) order of the autoregressive model. If no order is given, it will be determined using the Akaike information criterion. When the moving median is used as the smoother, med_win is expected. If no med_win is given, it will default to c(-42, 42). When resampling from window, one can choose the window size for the resampling window with resample_win by giving a window like e.g. c(-14,14)..

Details

For the moving median, the med_win is the total size of the window, meaning that for the value corresponding to day x, the data points from day x + med_win[1] to x + med_win[2] will be used for the calculation of the median.

If there is no data for two times med_win[2]-med_win[1] consecutive time units, there will be time points at which no confidence bound can be calculated. In this case, it will be assumed that the confidence bound is outside of the detection interval when detecting sustained change.

In case there are multiple instances where the algorithm would detect a sustained change (i.e. if after the first sustained change the confidence bounds leave the detection interval and then return into it for longer than min_change_dur time units) then only the first sustained change would be detected.

Please note that the event onset could be on a date where there are no actual measurements. This can happen when there is a gap in the data. In this case, the confidence bounds will extend into the gap. If the confidence bounds in this period are outside the detection interval and remain outside for the next min_change_duration time units, the event onset will be in this gap.

The censoring date is based on the last date where the confidence bounds can be calculated. We do not extend the confidence bounds to the last data point so that the confidence bounds don't change in case we obtain new measurements with time points later than the latest time point at which we have a measurement.

The edecob function runs the functions mov_med, smoother_resid, bt_smoother, conf_band, and detect_event in this order for all subjects given. If desired, the functions can also manually be applied for the data to obtain e.g. the confidence bands. Note that in order to run one of these functions, the output of the previous functions are needed.

Value

The output data is a list containing as many elements as the number of sources in data plus one. Every element in this list will again be a list named after the corresponding sources. Each of these lists contains the following elements:

event

gives a list with four values: event_detected, event_onset, event_duration, and event_stop.

event_detected

gives whether an event was detected

event_onset

gives the first time point at which the upper or lower bound of the confidence band is inside the detection bounds, and after which it stays inside the detection bounds for at least min_change_dur consecutive time units

event_duration

gives the number of time units the upper or lower bound of the confidence band stays inside the detection bounds after event_onset

event_stop

gives whether the confidence bounds stay inside the detection bounds until the last time point at which we can calculate the confidence bound or not.

conf_band

gives a data frame containing the confidence bands. The columns are source, time point, lower bound, and upper bound of the confidence band.

smoother_pts

gives a data frame containing the smoother. The columns are source, time point, and the smoother

data

gives the data but with four additional columns: event_detected, event_onset, event_duration, and event_stop. They contain the same values as in event.

detec_lower

gives the lower detection bound.

detec_upper

gives the upper detection bound.

smoother

gives the smoother used.

resample_method

gives the resampling method used for the bootstrap.

min_change_dur

gives the smallest consecutive number of time units the confidence bounds must stay within the detection bounds in order for an event to be detected.

conf_band_lvl

gives the level of the simultaneous confidence band.

bt_tot_rep

gives the total amount of bootstrap repetitions performed.

call

gives the function call.

col_names

gives the original column names of the data.

time_unit

gives the unit of time used.

The last element in the output data is called event_info and is a data frame containing the information from event from each patient. event_info will thus have the following columns: source, event_detected, event_onset, event_duration, and event_stop.

Mathematical background

The mathematical background will be explained in the following sections.

Moving Median

Consider a sample X_1,…, X_n of size n and the reordering X_{(1)},…, X_{(n)} such that X_{(1)} ≤ X_{(2)} ≤ … ≤ X_{(n)}, commonly called the order statistic. Then for n even the median usually defined as

median(X_1,…, X_n) = X_{(k)}, \mathrm{where} \; k = n/2.

In the case where n is odd the median is defined as

median(X_1,…, X_n) = 1/2(X_{(k)} + X_{(k+1)}), \mathrm{where} \; k = n/2.

Let the study days at which the measurements X_1, …, X_n were taken be t_1, …, t_n. Let T a fixed positive amount of time. Then the moving median at time point t with window size T is defined as

S(t) = median({X_j | t - T/2 ≤ t_j ≤ t + T/2}).

The Model

An autoregressive (AR) model is used to model the residuals of the smoother η:

Y(t) = S(t) + η(t)

η(t) = ∑^p_{j = 1} φ_j η(t - j) + ε

where variable t is the study day, Y(t) the data point at study day t, S(t) a smoother, η(t) the difference between the smoother and the measurement at study day t, p the order of the AR model, φ_j the coefficients of the AR model, and ε the error of the AR model. The order is calculated using the Akaike information criterion (AIC) if it was not given in the function call.

Bootstrap

In the following, the star * denotes a bootstrapped value. The bootstrap procedure is as follows:

1. Compute the smoother S(t).

2. Compute the residuals η(t_i) = Y(t_i) - S(t_i).

3. Fit an AR(p) model to η(t_i) to obtain the coefficients φ_1,…, φ_p and ε(t_i) = η(t_i) - ∑^p_{j = 1} φ_j η(t_i - t_{i-j}) the error of the AR model.

4. Randomly choose a ε(t_i)^* with replacement from ε(t_{p+1}),…, ε(t_n) to obtain

   Y(t_i)^* = S(t_i) + η(t_i)^*,

   where

   η(t_i)^* = ∑^p_{j = 1} φ_j η(t_{i-j})^*+ ε(t_{i-j})^*

   the bootstrapped residuals of the smoother.

5. Compute S(.)^* = g(Y(t_1),…, Y(t_n)) where g is the function with which the smoother is calculated.

6. Repeat steps 4 and 5 bt_tot_rep times to obtain S(t_i)^*_b for β = 1,…, bt_tot_rep.

Calculation of the Confidence Bounds

The confidence bounds are calculated as follows:

1. We compute the quantiles

   q_x(t_i), q_{1-x}(t_i) i = 1,…, N

   where

   q_x(t_i) = inf≤ft\{u; P^*[S(t_i)^*_b - S(t_i) ≤ u] ≥ x\right\}

   is a pointwise bootstrap quantile, S(t_i)^*_b the bootstrapped smoother, and N the number of measurements or rows in data, in our case the number of rows.

2. We vary the pointwise error x until

   P^*[q_x(t_i) ≤ S(t_i)^*_b - S(t_i) ≤ q_{1-x}(t_i) \forall i = 1,…, N] \approx 1-α.

   In other words, until the ratio of bootstrap curves that have all their points within [q_x(t_i), q_{1-x}(t_i)] is approximately 1-α.

3. We define

   I_n(t_i) = [S(t_i) + q_x(t_i), S(t_i) + q_{1-x}(t_i)] \forall i = 1,…, N

   the confidence bounds. Then {I_n(t_i); i = 1,…, N} is a consistent simultaneous confidence band of level 1-α.

References

Bühlmann, P. (1998). Sieve Bootstrap for Smoothing in Nonstationary Time Series. The Annals of Statistics, 26(1), 48-83.

Hogg, R., McKean, J. and Craig, A. (2014). Introduction to mathematical statistics. Harlow: Pearson Education.

See Also

summary.edecob, plot.edecob

Examples

library(edecob)

# Let us examine the example_data dataset
head(example_data, 3)
#>     subject study_day jump_height
#> 1 Subject 1         1    58.13024
#> 2 Subject 1         5    59.48988
#> 3 Subject 1         9    54.14774

# We apply the main fuction of the package onto our example_data
example_event <- edecob(example_data, med_win = c(-21,21), bt_tot_rep = 10,
                        min_change_dur = 70)
names(example_event)
#> [1] "Subject 1"  "Subject 2"  "event_info"

# example_event contains the event data for each source
plot(example_event$`Subject 1`)
plot(example_event$`Subject 2`)

# example_event also contains a data frame containing the event information for all patients
example_event$event_info
#>           event_detected event_onset event_duration event_stop
#> Subject 1           TRUE         119            134       TRUE
#> Subject 2          FALSE         306             60      FALSE

# Using this data frame, we can draw a survival plot
library("survival")
plot(survfit(Surv(time = event_onset, event = event_detected) ~ 1,
             data = example_event$event_info),
     conf.int = FALSE, xlim = c(0,350), ylim = c(0,1), mark.time = TRUE,
     xlab = "Time point", ylab = "Survival probability", main = "Survival plot")

edecob documentation built on Nov. 4, 2022, 5:07 p.m.