The fastverse is an extensible suite of R packages, developed independently by various people, that contribute to the objectives of:
The fastverse installs 4 core packages (data.table, collapse, kit and magrittr)^[Before v0.3.0 matrixStats and fst were past of the core fastverse, but were removed following a poll on Twitter in November 2022 where more than 50% voted in favor of removing them from the core fastverse.] that are (by default) attached with library(fastverse)
. These packages were selected because they provide high quality compiled code for most common statistical and data manipulation tasks, have carefully managed APIs, jointly depend only on base R and Rcpp, and work remarkably well together.
library(fastverse) # -- Attaching packages ------------------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v data.table 1.15.4 v kit 0.0.17 # v magrittr 2.0.3 v collapse 2.0.15
The fastverse package then provides functionality familiar from the tidyverse package, such as checking and reporting namespace clashes, and utilities for updating packages, listing dependencies etc...
# Checking for any updates fastverse_update() # All fastverse packages up-to-date
A key feature of the fastverse is that it can be extended with other packages that can easily be loaded into the current session and then managed using the tools this package provides. Users are also encouraged to make of use the features described in the remainder of this vignette to permanently extend the fastverse or even create 'verses' of packages that suit their personal analysis needs. A selection of suggested packages is provided on the website^[Let me know about other packages you think should be featured there.].
After the core packages have been attached with library(fastverse)
, it is possible to extend the fastverse for the current session by adding any number of additional packages with fastverse_extend()
. This will attach the packages, displaying the package versions (useful for replicability), and (by default) check for namespace clashes with attached packages, as well as among the added packages.
# Extend the fastverse for the session fastverse_extend(xts, roll, fasttime) # -- Attaching extension packages --------------------------------------------------------------------- fastverse 0.3.2 -- # v xts 0.13.1 v fasttime 1.1.0 # v roll 1.1.6 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x xts::first() masks data.table::first() # x xts::last() masks data.table::last() # See that these are now part of the fastverse fastverse_packages() # [1] "data.table" "magrittr" "kit" "collapse" "xts" "roll" "fasttime" "fastverse" # They are also saved in a like-named option options("fastverse.extend") # $fastverse.extend # [1] "xts" "roll" "fasttime"
All fastverse packages (or particular packages) can be detached using fastverse_detach
.
# Detaches all packages (including the fastverse) but does not (default) unload them fastverse_detach()
For programming purposes it is also possible to pass vectors of packages to both fastverse_extend
and fastverse_detach
^[In particular, the ...
expression is first captured using substitute(c(...))
, and then evaluated inside tryCatch
. If this evaluation fails or did not result in a character vector, the expression is coerced to character.]. The defaults of fastverse_detach
are set such that detaching is very 'light'. Packages are not unloaded and all fastverse options set for the session are kept.
# Extensions are still here ... options("fastverse.extend") # $fastverse.extend # [1] "xts" "roll" "fasttime" # Thus attaching the fastverse again will include them library(fastverse) # -- Attaching packages ------------------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v data.table 1.15.4 v xts 0.13.1 # v magrittr 2.0.3 v roll 1.1.6 # v kit 0.0.17 v fasttime 1.1.0 # v collapse 2.0.15 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x xts::first() masks data.table::first() # x xts::last() masks data.table::last() # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr()
'Harder' modes of detaching can be achieved using arguments unload = TRUE
(and force = TRUE
) to (forcefully) detach and unload fastverse packages, and/or session = TRUE
which will clear all fastverse options set^[options("fastverse.quiet")
and options("fastverse.styling")
will only be cleared if all packages are detached. If selected packages are detached, they are removed from options("fastverse.extend")
.].
# Detaching and unloading all packages and clearing options fastverse_detach(session = TRUE, unload = TRUE)
fastverse_detach
can also be used to detach any other attached packages not part of the fastverse. It is recommended to load all packages used in the current session through fastverse_extend()
, to display any conflicts when they are loaded and be able to keep track of the search path with fastverse_conflicts()
.
Since options("fastverse.extend")
keeps track of which packages were added to the fastverse for the current session, it is also possible to set it before loading the fastverse e.g.
options(fastverse.extend = c("qs", "fst")) library(fastverse) # -- Attaching packages ------------------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v data.table 1.15.4 v collapse 2.0.15 # v magrittr 2.0.3 v qs 0.25.5 # v kit 0.0.17 v fst 0.9.8 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr() fastverse_detach(session = TRUE)
fasvtverse_extend
and fastverse_detach
both have an argument permanent = TRUE
which can be used to make these changes persist across R sessions. This is implemented using a global configuration file saved to the package directory^[Thus it will be removed when the fastverse is reinstalled.].
For example, suppose most of my work involves time series analysis, and I would like to add xts, zoo, anytime and roll to my fastverse. Let's say I also don't really need the switches and parallel statistics provided by the kit package and I am completely happy with the base pipe so I don't need magrittr. Let's finally say that I don't want xts::first
and xts::last
to mask data.table::first
and data.table::last
.
Then I could permanently modify my fastverse as follows^[I note that namespace conflicts can also be detected and handled with the conflicted package on CRAN.]:
library(fastverse) # -- Attaching packages ------------------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v data.table 1.15.4 v kit 0.0.17 # v magrittr 2.0.3 v collapse 2.0.15 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr() # Adding extensions fastverse_extend(xts, zoo, roll, anytime, permanent = TRUE) # -- Attaching extension packages --------------------------------------------------------------------- fastverse 0.3.2 -- # v xts 0.13.1 v anytime 0.3.9 # v roll 1.1.6 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x zoo::as.Date() masks base::as.Date() # x zoo::as.Date.numeric() masks base::as.Date.numeric() # x xts::first() masks data.table::first() # x xts::last() masks data.table::last() # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr() # Removing some core packages fastverse_detach(data.table, kit, magrittr, permanent = TRUE) # Adding data.table again, so it is attached last fastverse_extend(data.table, permanent = TRUE) # -- Attaching extension packages --------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v data.table 1.15.4 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x data.table::first() masks xts::first() # x data.table::last() masks xts::last() # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr()
To verify our modification, we can see the order in which the packages are attached, and do a conflict check:
# This will be the order in which packages are attached fastverse_packages(include.self = FALSE) # [1] "collapse" "xts" "zoo" "roll" "anytime" "data.table" # Check conflicts to make sure data.table functions take precedence fastverse_conflicts() # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x zoo::as.Date() masks base::as.Date() # x zoo::as.Date.numeric() masks base::as.Date.numeric() # x data.table::first() masks xts::first() # x data.table::last() masks xts::last() # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr()
Note that options("fastverse.extend")
is still empty, because we have written those changes to a config file^[When fetching the names of fastverse packages, fastverse_packages
first checks any config file and then checks options("fastverse.extend")
.]. Now lets see if our permanent modification worked:
# Detach all packages and clear all options fastverse_detach(session = TRUE)
library(fastverse) # -- Attaching packages ------------------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'data.table' was built under R version 4.3.1 # v collapse 2.0.15 v roll 1.1.6 # v xts 0.13.1 v anytime 0.3.9 # v zoo 1.8.12 v data.table 1.15.4 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x zoo::as.Date() masks base::as.Date() # x zoo::as.Date.numeric() masks base::as.Date.numeric() # x data.table::first() masks xts::first() # x data.table::last() masks xts::last() # x data.table::yearmon() masks zoo::yearmon() # x data.table::yearqtr() masks zoo::yearqtr()
After this permanent modification, the fastverse can still be extend for the session:
# Extension for the session fastverse_extend(Rfast, coop) # -- Attaching extension packages --------------------------------------------------------------------- fastverse 0.3.2 -- # Warning: package 'Rcpp' was built under R version 4.3.1 # v Rfast 2.1.0 v coop 0.6.3 # -- Conflicts ---------------------------------------------------------------------------------- fastverse_conflicts() -- # x Rfast::group() masks collapse::group() # x Rfast::transpose() masks data.table::transpose() # These packages go here options("fastverse.extend") # $fastverse.extend # [1] "Rfast" "coop" # This fetches packages from both the file and the option fastverse_packages() # [1] "collapse" "xts" "zoo" "roll" "anytime" "data.table" "Rfast" "coop" "fastverse"
As long as the current installation of the fastverse is kept, these modifications will persist across R sessions. Needless to say this is not ideal as reinstallation of the fastverse will remove the config file. Therefore, the fastverse also offers a persistent and more flexible mechanism to configure it inside projects.
You can put together a custom collection of packages for a project, and load / manage them with library(fastverse)
.
For this you need to include a configuration file named .fastverse
(no file extension) inside a project directory, and place inside that file the names of packages to be loaded when calling library(fastverse)
^[You can place package names in that file any manner you deem suitable: separated using spaces or commas, on one or multiple lines. Note that the file will be read from left to right and from top to bottom. Packages are attached in the order found in the file.]. Note that all packages to be loaded as core fastverse for your project need to be included in that file, in the order they should be attached.
In addition, you can set global options and environment variables, either before or after the list of packages. Options must be prefixed with _opt_
and environment variables with _env_
, and either must be placed on separate lines. For example, including a .fastverse
script like this
_opt_collapse_mask = c("manip", "helper") _opt_fastverse.install = TRUE data.table, kit, magrittr, collapse, qs, fixest, ranger, robustbase, decompr _opt_max.print = 100 _opt_kit.nThread = 4 _env_NCRAN = TRUE
in a project directory, and placing library(fastverse)
at the top of an R script in the project will first set options(collapse_mask = c("manip", "helper), fastverse.install = TRUE)
^[Setting options(fastverse.install = TRUE)
before loading the packages will make sure any packages missing on your system will be installed beforehand. options(collapse_mask = ...)
can be used to make base R and dplyr functions with faster versions provided in the collapse package. See help("collapse-options")
.], then attach all the packages in the order provided, and then set options(max.print = 100, kit.nThread = 4)
and Sys.setenv(NCRAN = TRUE)
. Note that packages can be spread across multiple lines, but need to be together i.e. they cannot be separated by options. Alternatively you can also use an .Rprofile
file and set fastverse options such as options(fastverse.extend = c(...packages...))
there. The advantage of .fastverse
files is that you can specify options to be loaded before or after the loading of packages through library(fastverse)
^[This may be useful if packages set certain options when being loaded, overwriting any prior settings, or if options affect the way packages are loaded and should better be set after they are loaded.], and you can also prevent core packages from being loaded by excluding them from the .fastverse
file.
Using the fastverse to jointly load important packages and set important options can facilitate package management inside projects and serve as a bridge between loading packages individually and using more rigorous package and namespace management solutions such as renv, conflicted, box or import.
At the most basic level, loading packages with the fastverse displays the package versions and checks namespace conflicts, helping you spot issues that might arise as packages are updated. It also allows you to easily check the dependencies and update status of packages used in your project with fastverse_sitrep()
, and update if necessary with fastverse_update()
.
Using a config file in a project will ignore any global configuration as discussed in the previous section. You can still extend the fastverse inside a project session using fastverse_extend
(or options(fastvers.extend = c(...packages...))
before library(fastverse)
).
At last, you can also create wholly separate and fully customizable verses - with the fastverse_child()
function. Let's say I would like to create a verse for time series analysis that I want to keep separate from the fastverse. This is easily done using e.g.
fastverse_child( name = "tsverse", title = "Time Series Package Verse", pkg = c("xts", "roll", "zoo", "tsbox", "urca", "tseries", "tsutils", "forecast"), maintainer = 'person("GivenName", "FamilyName", role = "cre", email = "your@email.com")', dir = "C:/Users/.../Documents", theme = "tidyverse")
By default (install = TRUE
, keep.dir = TRUE
) the package is installed and a source directory is created under dir/name, allowing further edits to the package. Such fastverse children inherit 90% of the functionality of the fastverse package: they are not permanently globally extensible and can not bear children themselves, but can be configured for projects (using, in this case, a .tsverse
config file and options starting with 'tsverse') and extended in the session. The function uses a prepared 'child' branch of the GitHub repository, and thus does not require any further packages such as devtools
.
Just like it's tidyverse equivalent, fastverse_deps()
(recursively) determines the joint dependencies of fastverse packages and also checks local versions against CRAN versions.
# Recursively determine the joint dependencies of the current fastverse configuration fastverse_deps(recursive = TRUE) # Returns a data frame # package repos local behind # 1 collapse 2.0.14 2.0.15 FALSE # 2 xts 0.13.2 0.13.1 TRUE # 3 zoo 1.8.12 1.8.12 FALSE # 4 roll 1.1.7 1.1.6 TRUE # 5 anytime 0.3.9 0.3.9 FALSE # 6 data.table 1.15.4 1.15.4 FALSE # 7 Rfast 2.1.0 2.1.0 FALSE # 8 coop 0.6.3 0.6.3 FALSE # 9 BH 1.84.0.0 1.81.0.1 TRUE # 10 lattice 0.22.6 0.21.8 TRUE # 11 Rcpp 1.0.12 1.0.12 FALSE # 12 RcppArmadillo 0.12.8.3.0 0.12.8.1.0 TRUE # 13 RcppGSL 0.3.13 0.3.13 FALSE # 14 RcppParallel 5.1.7 5.1.7 FALSE # 15 RcppZiggurat 0.1.6 0.1.6 FALSE
Additional flexibility is offered by the pkg
argument allowing dependency and update status checks for any other packages. fastverse_sitrep()
displays the same information in a more elegant printout, also showing the version of R, and whether any global or project-level configuration files - as discussed in previous sections - are used.
# Check versions and update status of packages and dependencies fastverse_sitrep() # default is recursive = FALSE # -- fastverse 0.3.2: Situation Report ------------------------------------------------------------------------ R 4.3.0 -- # * Global config file: TRUE # * Project config file: FALSE # -- Core packages ------------------------------------------------------------------------------------------------------- # * collapse (2.0.15) # * xts (0.13.1 < 0.13.2) # * zoo (1.8.12) # * roll (1.1.6 < 1.1.7) # * anytime (0.3.9) # * data.table (1.15.4) # -- Extension packages -------------------------------------------------------------------------------------------------- # * Rfast (2.1.0) # * coop (0.6.3) # -- Dependencies -------------------------------------------------------------------------------------------------------- # * BH (1.81.0.1 < 1.84.0.0) # * lattice (0.21.8 < 0.22.6) # * Rcpp (1.0.12) # * RcppArmadillo (0.12.8.1.0 < 0.12.8.3.0) # * RcppParallel (5.1.7) # * RcppZiggurat (0.1.6)
fastverse_update()
can be used to (default) print an install.packages()
statement to update fastverse packages and dependencies, or to install updates straight away (install = TRUE
). In all three functions, check.deps = FALSE
can be specified to exclude dependencies of fastverse packages, recursive = TRUE
can be used to check all dependencies, and include.self = TRUE
can be used to also check for updates of the fastverse
package itself.
The development versions of all core and suggested fastverse packages are also collected on an r-universe server at https://fastverse.r-universe.dev. Mac/Windows binaries are built on this server within 24h after a change to the main branch of the GitHub repository. Since v0.3.0 the package exports a global macro .fastverse_repos
which contains the URL of this repository alongside the CRAN repository URL (needed for non-fastverse dependencies). Functions fastverse_deps()
, fastverse_update()
, fastverse_install()
and fastverse_siteep()
have a repos
argument which defaults to getOption("repos")
(CRAN), but users can set repos = .fastverse_repos
to check against / update / install development versions of fastverse packages from r-universe.
# Check development versions on GitHub / r-universe, and install them if desired. fastverse_update(repos = .fastverse_repos) # The following packages are out of date: # # * xts (0.13.1 -> 0.13.2.2) # * roll (1.1.6 -> 1.1.8) # * anytime (0.3.9 -> 0.3.9.5) # * data.table (1.15.4 -> 1.15.99) # * BH (1.81.0.1 -> 1.84.0.0) # * lattice (0.21.8 -> 0.22.6) # * Rcpp (1.0.12 -> 1.0.12.3) # * RcppArmadillo (0.12.8.1.0 -> 0.12.8.3.0) # # Start a clean R session then run: # install.packages(c("xts", "roll", "anytime", "data.table", "BH", "lattice", "Rcpp", # "RcppArmadillo"), repos = c(fastverse = "https://fastverse.r-universe.dev", CRAN = "https://cloud.r-project.org"))
Apart from "fastverse.extend"
, the fastverse also has options "fastverse.install"
, "fastverse.styling"
and "fastverse.quiet"
. Setting options(fastverse.install = TRUE)
before library(fastverse)
will make sure any packages missing on your system will be installed beforehand. This can also be done ex-post using the fastverse_install()
function. Setting options(fastverse.styling = FALSE)
will disable coloured text printed to the R console (as done for this vignette). options(fastverse.quiet = TRUE)
will omit any messages printed from library(fastverse)
and fastverse_extend()
or fastverse_install()
:
fastverse_detach() options(fastverse.quiet = TRUE) library(fastverse) # Nothing to see here # Warning: package 'data.table' was built under R version 4.3.1 # This gives lots of function clashes with data.table, but they are not displayed in quiet mode fastverse_extend(lubridate) # Warning: package 'lubridate' was built under R version 4.3.1
If you only want to omit a function clash check when calling fastverse_extend
, you can also use fastverse_extend(..., check.conflicts = FALSE)
.
The fastverse was developed principally for 2 reasons: to promote quality high-performance software development for R, and to provide a flexible approach to package loading and management in R, particularly for users wishing to combine various high-performance packages in statistical workflows. To the extent that high-performance software development in R continues to prioritize low-dependency and stable APIs, complex statistical and project workflows can be developed without sophisticated package management solutions.
# Resetting the fastverse to defaults (clearing all permanent extensions and options) fastverse_reset() # Detaching fastverse_detach()
data.table, collapse and kit support OpenMP multithreading on all platforms. Global defaults can be set using data.table::setDTthreads()
, collapse::set_collapse(nthreads = ...)
and options(kit.nThread = ...)
. Users should be careful with running multithreaded collapse and kit functions inside data.table. I have created a small video tutorial for collapse where I talk more about this amongst other things.
Note also that on macOS, OpenMP is disabled in binaries installed from CRAN. To enable OpenMP on macOS, users first need to install OpenMP and do some configuration. See here for instructions and the latest OpenMP releases. I have also compactly written the terminal commands you need to run in the description of the tutorial. After installing OpenMP and configuring your R-session, install the packages from source or use r-universe binaries. An easy way would be to run fastverse_install(data.table, collapse, kit, only.missing = FALSE, repos = .fastverse_repos)
.
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.