ggblanket"

In ggblanket: Simplify 'ggplot2' Visualisation

knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>",
  message = FALSE,
  warning = FALSE,
  fig.width = 6,
  fig.asp = 0.6,
  out.width = "70%",
  dpi = 300
)

Overview

ggblanket is a package of ggplot2 wrapper functions.

The primary objective is to simplify ggplot2 visualisation.

Secondary objectives relate to:

• Design: produce well-designed visualisation
• Alignment: align with ggplot2 and tidyverse
• Scope: cover much of what ggplot2 does.

Computational speed has been traded-off.

How it works

1. First setup with set_blanket()
2. Each gg_* function wraps a geom
3. A merged col argument to colour/fill by a variable
4. A facet argument to facet by a variable
5. A facet2 argument to facet by a 2nd variable
6. Other aesthetics via mapping argument
7. Prefixed arguments to customise x/y/col/facet
8. Smart *_label defaults for axis and legend titles
9. Other ggplot2::geom_* arguments via ...
10. Families of *_mode_* themes with legend variants
11. Side-effects to the theme based on the theme_orientation
12. One *_symmetric continuous scale
13. Ability to add multiple geom_* layers
14. Arguments to customise setup with set_blanket()
15. A gg_blanket() function with geom flexibility

library(dplyr)
library(stringr)
library(ggplot2)
library(scales)
library(ggblanket)
library(palmerpenguins)
library(patchwork)

penguins2 <- penguins |> 
  labelled::set_variable_labels(
    bill_length_mm = "Bill length (mm)",
    bill_depth_mm = "Bill depth (mm)",
    flipper_length_mm = "Flipper length (mm)",
    body_mass_g = "Body mass (g)",
  ) |> 
  mutate(sex = factor(sex, labels = c("Female", "Male"))) |> 
  tidyr::drop_na(sex) 

1. First setup with set_blanket()

The set_blanket() function should be run first.

This sets the default style of plots with themes and colours etc. It can be customised.

It should be run at the start of every script or quarto document.

set_blanket()

2. Each gg_* function wraps a geom

Each gg_* function wraps a ggplot2::ggplot() function with the associated ggplot2::geom_*() function.

Almost every geom in ggplot2 is wrapped.

Position related aesthetics can be added directly as arguments.

penguins2 |>
  gg_point(
    x = flipper_length_mm,
    y = body_mass_g,
  )

3. A merged col argument to colour/fill by a variable

The colour and fill aesthetics of ggplot2 are merged into a single concept represented by the col argument.

When the col argument is added, this means that outlines and interiors are coloured/filled by the col variable using the col_palette.

The defaults used in set_blanket for the polygon-ish geoms generally use linewidth = 0 to make things work nicely.

penguins2 |>
  gg_violin(
    x = flipper_length_mm,
    y = island,
    col = sex, 
  )

4. A facet argument to facet by a variable

Users provide an unquoted facet variable to facet by.

When facet is specified, the facet_layout will default to a "wrap" of the facet variable (if facet2 = NULL).

penguins2 |>
  gg_histogram(
    x = flipper_length_mm,
    facet = species,
  )

5. A facet2 argument to facet by a 2nd variable

Users can also provide an unquoted facet2 variable to facet by.

When facet2 is specified, the facet_layout will default to a "grid" of the facet variable (horizontally) by the facet2 variable (vertically).

penguins2 |>
  gg_histogram(
    x = flipper_length_mm,
    facet = species,
    facet2 = sex,
  )

6. Other aesthetics via mapping argument

Some aesthetics are not available via an argument (e.g. alpha, size, shape, linetype and linewidth).

These can be accessed via the mapping argument using the aes() function.

To customise the scales/guides of these other aesthetics, just + on the applicable ggplot2 layer. In some situations, you may need to override the colour used in the guide, or reverse the values in the relevant scale etc.

penguins2 |> 
  gg_jitter(
    x = species, 
    y = flipper_length_mm, 
    col = island,
    mapping = aes(shape = sex),
  ) +
  guides(shape = guide_legend(override.aes = list(colour = grey)))

7. Prefixed arguments to customise x/y/col/facet

There are numerous arguments to customise plots that are prefixed by whether they relate to x, y, col or facet.

For x, y and col, these relate to associated arguments within ggplot2 scales and guides. For facet, they relate to associated arguments within ggplot2::facet_wrap and ggplot2::facet_grid.

Scales and guides associated with other other aesthetics can be customised by adding the applicable ggplot2 layer.

penguins2 |>
  gg_jitter(
    x = flipper_length_mm,
    y = body_mass_g,
    col = bill_length_mm,
    x_breaks_n = 4,
    x_label = "Flipper length",
    x_labels = \(x) paste0(x, " mm"),
    y_expand_limits = 1000,
    y_labels = label_number(big.mark = " "), 
    y_transform = "sqrt",
    col_label = "Bill\nlength (mm)",
    col_steps = TRUE,
    col_breaks = \(x) quantile(x, seq(0, 1, 0.25)),
    col_palette = viridis::rocket(n = 9, direction = -1),
  )

8. Smart *_label defaults for axis and legend titles

The x_label, y_label and col_label for the axis and legend titles can be manually specified with the applicable *_label argument (or + ggplot2::labs(...)).

If not specified, they will first take any label attribute associated with the applicable variable.

If none, they will then convert the variable name to a label name using the label_to_case function, which defaults to sentence case (i.e. snakecase::to_sentence_case).

penguins2 |>
  gg_freqpoly(
    x = flipper_length_mm,
    col = species,
  )

9. Other ggplot2::geom_* arguments via ...

The ... argument provides access to all other arguments in the ggplot2::geom_*() function.

Common arguments to add include colour, fill, alpha, linewidth, linetype, size and width, which enables fixing of these to a particular value.

Use the ggplot2::geom_* help to see what arguments are available.

penguins2 |>
  gg_smooth(
    x = flipper_length_mm,
    y = body_mass_g,
    linewidth = 1, 
    linetype = "dashed",
    level = 0.999, 
    se = TRUE,
    blend = "multiply",
  ) 

10. Families of *_mode_* themes with legend variants

light_mode_* and dark_mode_* theme families are provided with variants that differ based on legend placement with suffix r (right), b (bottom), and t (top). These functions were built for use with the theme argument - and have flexibility to adjust colours, linewidths etc.

penguins2 |>
  gg_histogram(
    x = flipper_length_mm,
    col = species,
    title = "Penguin flipper length by species",
    subtitle = "Palmer Archipelago, Antarctica",
    caption = "Source: Gorman, 2020", 
    theme = dark_mode_t() + theme(legend.title = element_blank()),
  ) 

11. Side-effects to the theme based on the theme_orientation

The gg_* function adds helpful side-effects to the theme based on the theme_orientation, theme_axis_line_rm, theme_axis_ticks_rm and , theme_panel_grid_rm arguments.

For the default where theme_axis_line_rm, theme_axis_ticks_rm and , theme_panel_grid_rm all equal TRUE:

• Where theme_orientation = "x", the gg_* function will remove the y axis line/ticks and the x gridlines from the theme (by changing their colour to "transparent").
• Where theme_orientation = "y", the opposite will occur.

If the gg_* guesses an incorrect theme_orientation, then the user can change this. The user can change any of these side-effects by setting theme_axis_line_rm, theme_axis_ticks_rm or , theme_panel_grid_rm to FALSE.

Any theme used should be designed to anticipate the side-effects desired.

The effect of this is to enable one theme to be used across all plots whether the plot is vertical or horizontal.

p1 <- penguins2 |>
  gg_jitter(
    x = sex,
    y = bill_depth_mm,
  )

p2 <- penguins2 |>
  gg_jitter(
    x = bill_depth_mm,
    y = sex,
  ) 

p1 + p2

12. One *_symmetric continuous scale

A *_symmetric continuous scale can be made where:

• x_transform and y_transform are NULL
• the stat is not "sf"
• if faceted, the relevant scale is "fixed"

Both symmetric continuous scales cannot be made where the stat is not 'identity'.

By default, the gg_* function will make a x_symmetric scale if there is a y discrete axis and a x continuous axis. Otherwise, it will make a y_symmetric scale.

A y_symmetric axis makes:

• the limits locked to the range of the y_breaks
• the y_expand default to c(0, 0).

The vice versa occurs for an x_symmetric axis.

Use *_symmetric = FALSE to revert to the normal limits and expand defaults (i.e. the limits of the range of the data including *_expand_limits with *_expand = c(0.05, 0.05)).

Note all continuous scales ensure all data is kept using scales::oob_keep - and, by default, are left unclipped (i.e. coord_cartesian(clip = "off").

13. Ability to add multiple geom_* layers

Users can make plots with multiple ggplot2::geom_* layers.

The gg_*() geom layer will be the bottom geom layer of the plot, and each subsequent geom_*() layer is placed on top.

Aesthetics added directly (e.g. x, y etc.) to the gg_*() function will inherit to later geom_*() layers, whereas those added to the mapping argument will not.

penguins2 |> 
  gg_violin(
    x = species, 
    y = bill_depth_mm,
    outliers = FALSE,
  ) +
  geom_boxplot(
    width = 0.25,
    colour = lightness[1],
    fill = lightness[2],
  ) +
  geom_jitter(
    colour = navy,
  ) 

The scales are built within the gg_*() function without knowledge of later layers. The gg_*() function builds scales with regard to the stat, position, and aesthetics (that the geom understands) etc. So, in some situations, users will need to take care.

penguins2 |>
  group_by(species, sex) |>
  summarise(
    lower = quantile(bill_depth_mm, probs = 0.05),
    upper = quantile(bill_depth_mm, probs = 0.95),
    bill_depth_mm = mean(bill_depth_mm, na.rm = TRUE),
  ) |>
  labelled::copy_labels_from(penguins2) |>
  gg_blanket(
    y = species,
    x = bill_depth_mm,
    xmin = lower, 
    xmax = upper,
    col = sex,
    position = position_dodge(),
    x_expand_limits = 0,
  ) +
  geom_col(
    width = 0.75,
    position = position_dodge(),
  ) +
  geom_errorbar(
    width = 0.1, 
    position = position_dodge(width = 0.75),
    colour = lightness[1],
  ) 

14. Arguments to customise setup with set_blanket()

The set_blanket function sets customisable defaults for the:

• the geom defaults, including the colour (and fill) of geoms
• the colour (and fill) palettes for discrete, continuous and ordinal
• the theme, and how/what side-effects are to be applied
• the function to apply to a unspecified/unlabelled x_label, y_label, col_label etc.

Note the theme argument in set_blanket can also be used to default a *_label to NULL (e.g. set_blanket(theme = list(dark_mode_r(), labs(colour = NULL, fill = NULL)))).

Users should try to do as much as possible in these set-up functions, rather than continually adding arguments to their gg_* functions.

set_blanket(
  theme = rlang::list2(
    light_mode_t(
      base_size = 9,
      axis_line_colour = "#78909C",
      panel_grid_colour = "#C8D7DF",
      panel_background_fill = "#E8EFF2",
      axis_line_linewidth = 0.25, 
      panel_grid_linewidth = 0.25, 
    ),
    labs(colour = NULL, fill = NULL),
  ),
  colour = "tan", 
  col_palette_d = c("#003f5c", "#bc5090", "#ffa600", "#357BA2"),
  col_palette_na_d = "#78909C",
)

p1 <- penguins2 |>
  gg_point(
    x = bill_depth_mm, 
    y = flipper_length_mm,
  ) 

p2 <- penguins2 |> 
  gg_bar(
    y = sex,
    col = species,
    position = "dodge",
  ) 

p1 + p2

set_blanket()

15. A gg_blanket() function with geom flexibility

The package is driven by the gg_blanket function, which has a geom argument with ggplot2::geom_blank defaults for geom, stat and position.

All other functions wrap this function with a fixed geom, and their own default stat and position arguments as per the applicable geom_* function.

This function can often be used with geoms that do not have an associated gg_* function.

geom_spoke()

expand.grid(x = 1:10, y = 1:10) |>
  tibble() |>
  mutate(angle = runif(100, 0, 2*pi)) |>
  mutate(speed = runif(100, 0, sqrt(0.1 * x))) |>
  gg_blanket(
    geom = "spoke",
    x = x, 
    y = y,
    col = speed,
    mapping = aes(angle = angle, radius = speed),
  ) +
  geom_point()

Further information

See the ggblanket website for further information, including articles and function reference.

ggblanket documentation built on April 4, 2025, 2:14 a.m.