knitr::opts_chunk$set( collapse = TRUE, comment = "#>" )
For historic reasons, ggrastr
used to be solely composed of the following functions:
geom_point_rast
: raster scatter plotsgeom_jitter_rast
: raster jittered scatter plotsgeom_boxplot_jitter
: boxplots that allows to jitter and rasterize outlier pointsgeom_tile_rast
: raster heatmapgeom_beeswarm_rast
: raster bee swarm plotsgeom_quasirandom_rast
: raster quasirandom scatter plotHowever, we strongly encourage users to use the rasterise()
function instead. For posterity's sake, we have only included the old vignettes here for the reference of users, along with the equivalent functions using rasterise()
.
Sometimes you need to publish a figure in a vector format:
library(ggplot2) library(ggrastr) points_num <- 10000 df <- data.frame(x=rnorm(points_num), y=rnorm(points_num), c=as.factor(1:points_num %% 2)) gg <- ggplot(df, aes(x=x, y=y, color=c)) + scale_color_discrete(guide="none") gg_vec <- gg + geom_point(size=0.5) print(gg_vec)
But in other cases, your figure contains thousands of points, e.g. try points_num <- 500000
in the example above, and you will notice the performance issues---it takes significantly longer to render the plot.
In this case, a reasonable solution would be to rasterize the plot. But the problem is that all text becomes rasterized as well.
Raster layers with ggrastr
were developed to prevent such a situation, using `rasterized
gg_rasterized <- gg + rasterise(geom_point(), dpi = 300, scale = 1) print(gg_rasterized)
The legacy function used in older versions of ggrastr was geom_point_rast()
:
gg_rast <- gg + geom_point_rast(size=0.5) print(gg_rast)
The plots look the same, but the difference in size can be seen when they are exported to pdfs. Unfortunately, there is a longer rendering time to produce such plots:
PrintFileSize <- function(gg, name) { invisible(ggsave('tmp.pdf', gg, width=4, height=4)) cat(name, ': ', file.info('tmp.pdf')$size / 1024, ' Kb.\n', sep = '') unlink('tmp.pdf') } PrintFileSize(gg_rast, 'Raster') PrintFileSize(gg_vec, 'Vector')
As expected, the difference becomes larger with growth of number of points:
points_num <- 1000000 df <- data.frame(x=rnorm(points_num), y=rnorm(points_num), c=as.factor(1:points_num %% 2)) gg <- ggplot(df, aes(x=x, y=y, color=c)) + scale_color_discrete(guide="none") gg_vec <- gg + geom_point(size=0.5) gg_rast <- gg + geom_point_rast(size=0.5) PrintFileSize(gg_rast, 'Raster') PrintFileSize(gg_vec, 'Vector')
Users may also opt to create rasterized scatter plots with jitter:
library(ggplot2) library(ggrastr) points_num <- 5000 df <- data.frame(x=rnorm(points_num), y=rnorm(points_num), c=as.factor(1:points_num %% 2)) gg <- ggplot(df, aes(x=x, y=y, color=c)) + scale_color_discrete(guide="none") gg_jitter_rast <- gg + rasterise(geom_jitter(), dpi = 300, scale = 1) print(gg_jitter_rast)
The legacy wrapper geom_jitter_rast()
used the following syntax:
library(ggplot2) library(ggrastr) points_num <- 5000 df <- data.frame(x=rnorm(points_num), y=rnorm(points_num), c=as.factor(1:points_num %% 2)) gg <- ggplot(df, aes(x=x, y=y, color=c)) + scale_color_discrete(guide=FALSE) gg_jitter_rast <- gg + geom_jitter_rast(raster.dpi=600) print(gg_jitter_rast)
Heatmaps also have similar issues with the default vectorized formats:
library(ggplot2) library(ggrastr) coords <- expand.grid(1:500, 1:500) coords$Value <- 1 / apply(as.matrix(coords), 1, function(x) sum((x - c(50, 50))^2)^0.01) gg_tile_vec <- ggplot(coords) + geom_tile(aes(x=Var1, y=Var2, fill=Value)) gg_tile_rast <- ggplot(coords) + rasterise(geom_tile(aes(x=Var1, y=Var2, fill=Value)), dpi = 300, scale = 1) print(gg_tile_rast)
The legacy function geom_tile_rast()
used the following syntax:
gg_tile_rast <- ggplot(coords) + geom_tile_rast(aes(x=Var1, y=Var2, fill=Value)) print(gg_tile_rast)
Note that we can see that the rasterized plots using ggrastr
are lighter in size when rendered to pdf:
PrintFileSize(gg_tile_rast, 'Raster') PrintFileSize(gg_tile_vec, 'Vector')
One can see a similar effect with violin plots:
library(ggplot2) library(ggrastr) gg_violin_vec <- ggplot(mtcars, aes(factor(cyl), mpg)) + geom_violin() gg_violin_rast <- ggplot(mtcars) + rasterise(geom_violin(aes(factor(cyl), mpg))) print(gg_violin_rast)
The legacy function geom_violin_rast()
had the following syntax:
gg_violin_rast <- ggplot(mtcars) + geom_violin_rast(aes(factor(cyl), mpg)) print(gg_violin_rast)
## difference in size shown PrintFileSize(gg_tile_rast, 'Raster') PrintFileSize(gg_tile_vec, 'Vector')
Another type of plot with a potentially large number of small objects is geom_boxplot:
library(ggplot2) library(ggrastr) points_num <- 5000 df <- data.frame(x=as.factor(1:points_num %% 2), y=log(abs(rcauchy(points_num)))) gg <- ggplot(df, aes(x=x, y=y)) + scale_color_discrete(guide="none") boxplot <- gg + geom_boxplot() print(boxplot)
With a large number of objects, outlier points become noninformative. For example, here is the rendered plot with points_num <- 1000000
.
For such a large number of points, it would be better to jitter them using geom_boxplot_jitter()
:
library(ggplot2) library(ggrastr) points_num <- 500000 df <- data.frame(x=as.factor(1:points_num %% 2), y=log(abs(rcauchy(points_num)))) gg <- ggplot(df, aes(x=x, y=y)) + scale_color_discrete(guide="none") gg_box_vec <- gg + geom_boxplot_jitter(outlier.size=0.1, outlier.jitter.width=0.3, outlier.alpha=0.5) print(gg_box_vec)
And this geom can be rasterized as well:
gg_box_rast <- gg + geom_boxplot_jitter(outlier.size=0.1, outlier.jitter.width=0.3, outlier.alpha=0.5, raster.dpi=200) print(gg_box_rast)
PrintFileSize(gg_box_rast, 'Raster') PrintFileSize(gg_box_vec, 'Vector')
ggrastr also allows users to create rasterized beeswarm plots. As described in the README for ggbeeswarm,
Beeswarm plots (aka column scatter plots or violin scatter plots) are a way of plotting points that would ordinarily overlap so that they fall next to each other instead. In addition to reducing overplotting, it helps visualize the density of the data at each point (similar to a violin plot), while still showing each data point individually. The ggrastr geom
geom_beeswarm_rast
is similar toggbeeswarm::geom_beeswarm()
, but it provides a rasterized layer:
library(ggplot2) library(ggrastr) ggplot(mtcars) + geom_beeswarm_rast(aes(x = factor(cyl), y=mpg), raster.dpi=600, cex=1.5)
Again, we strongly encourage users to simply use rasterise()
:
library(ggplot2) library(ggrastr) library(ggbeeswarm,) ggplot(mtcars) + rasterise(geom_beeswarm(aes(x = factor(cyl), y=mpg)))
Analogously, the legacy wrapper geom_quasirandom_rast()
is much like ggbeeswarm::geom_quasirandom()
, but with a rasterized layer:
library(ggplot2) library(ggrastr) ggplot(mtcars) + geom_quasirandom_rast(aes(x = factor(cyl), y=mpg), raster.dpi=600)
We encourage users to visit both CRAN and the GitHub repo for ggbeeswam for more details.
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.