Nothing
README.md
In manydata: A Portal for Global Governance Data
manydata 
{manydata} is a portal to ‘many’ packages containing many datacubes,
each containing many related datasets on many issue-domains, actors and
institutions of global governance. These ‘many’ packages are: -
{manyenviron}: contains data on international environmental
agreements - {manytrade}: contains data on international trade
agreements - {manyhealth}: contains data on international health
agreements - {manystates}: contains data on states throughout history
Datasets are related to one another within a datacube through a
particular coding system which follows the same principles across the
different packages.
For instance, in the data packages on international agreements
(including {manyenviron}, {manytrade}, and {manyhealth}), the
agreements and memberships datacubes have standardised IDs
(manyID), and date variables such as Begin and End that denote the
beginning and end dates of treaties respectively. The beginning date is
derived from the signature or entry into force date, whichever is the
earliest available date for the treaty. Standardised IDs across datasets
allow the same observations to be matched across datasets so that the
values can be compared or expanded where relevant. These specific
variable names allows the comparison of information across datasets that
have different sources. It enables users to point out the recurrence,
difference or absence of observations between the datasets and extract
more robust data when researching on a particular governance domain.
The memberships datacube contains additional date variables on each
state member’s ratification, signature, entry into force, and end dates
for each treaty. Data in the memberships datacube is comparable across
datasets through standardised state names and stateIDs, made possible
with the manypkgs::code_states() function. More information on each
state, including its Begin and End date, can be found in the
{manystates} package.
To enable users to work with the data in these packages, {manydata}
contains tools for:
- calling data packages,
- comparing individual datasets, and
- consolidating datacubes in different ways.
We intend for {manydata} to be useful:
- at the start of a research project, to access and gather recent
versions of well-regarded datasets, see what is available, describe,
and explore the data,
- in the middle of a project, to facilitate analysis, comparison and
modelling, and
- at the end of the project, to help with conducting robustness
checks, preparing replication scripts, and writing the next grant
application.
Call ‘many’ packages
The easiest way to install {manydata} is directly from CRAN.
install.packages("manydata")
The development version of the package {manydata} can also be
downloaded from GitHub.
# install.packages("remotes")
remotes::install_github("globalgov/manydata")
Once {manydata} is installed, the call_ functions can be used to
discover the ‘many packages’ currently available and/or download or
update these packages when needed. For this, the call_packages() can
be used.
library(manydata)
call_packages() # lists all packages currently available
call_packages("manytrade") # downloads and installs this package
The call_sources() function obtains information about the sources and
original locations of the desired datasets.
call_sources(package = "manydata", datacube = "emperors")
#> # A tibble: 3 × 4
#> Dataset Source URL Mapping
#> <chr> <chr> <chr> <chr>
#> 1 wikipedia Wikipedia, List_of_Roman_emperors, https://en.wikipe… http… from -…
#> 2 UNRV UNRV, Roman Emperor list, https://www.unrv.com/gover… http… from -…
#> 3 britannica Britannica, List of Roman emperors, https://www.brit… http… from -…
Comparing ‘many’ data
The first thing users of the data packages may want to do is to identify
datasets that might contribute to their research goals. One major
advantage of storing datasets in datacubes is that it facilitates the
comparison and analysis of multiple datasets in a specific domain of
global governance. To aid in the selection of datasets and the use of
data within datacubes, the compare_ functions in {manydata} allows
users to quickly compare different information on datacubes and/or
datasets across ‘many packages’. These include comparison for data
observations, variables, and ranges, overlap among observations, missing
observations, and conflicts among observations.
For now, let’s work with the Roman Emperors datacube included in
manydata. We can get a quick summary of the datasets included in this
package with the following command:
data(package = "manydata")
data(emperors, package = "manydata")
emperors
We can see that there are three named datasets relating to emperors
here: wikipedia (dataset assembled from Wikipedia pages), UNVR
(United Nations of Roman Vitrix), and britannica (Britannica
Encyclopedia List of Roman Emperors). Each of these datasets has their
advantages and so we may wish to understand their similarities and
differences, summarise variables across them, and perhaps also rerun
models across them.
The compare_dimensions() function returns a tibble with the
observations and variables of each dataset within the specified datacube
of a many package.
compare_dimensions(emperors)
#> # A tibble: 3 × 5
#> Dataset Observations Variables Earliest_Date Latest_Date
#> <chr> <chr> <chr> <mdate> <mdate>
#> 1 wikipedia 68 ID, Begin, End, FullName, B… -0026-01-16 0014-08-19
#> 2 UNRV 99 ID, Begin, End, Birth, Deat… -0014-01-01 -0027-12-31
#> 3 britannica 87 ID, Begin, End -0031-01-01 0014-12-31
The compare_ranges() function returns a tibble with the date range
using the earliest and latest dates of each dataset within the specified
datacube of a many package.
compare_ranges(emperors, variable = c("Begin", "End"))
#> # A tibble: 6 × 6
#> Dataset Variable Min Max Mean Median
#> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 wikipedia Begin -026-01-16 -026-01-16 -026-01-16 -026-01-16
#> 2 wikipedia End 0014-08-19 0014-08-19 0014-08-19 0014-08-19
#> 3 UNRV Begin -027-01-01 -027-12-31 -027-07-02 -027-07-02
#> 4 UNRV End -014-01-01 -014-12-31 -014-07-02 -014-07-02
#> 5 britannica Begin -031-01-01 -031-12-31 -031-07-02 -031-07-02
#> 6 britannica End 0014-01-01 0014-12-31 0014-07-02 0014-07-02
The compare_overlap() function returns a tibble with the number of
overlapping observations for a specified variable (specify using the
key argument) across datasets within the datacube.
plot(compare_overlap(emperors, key = "ID"))
The compare_missing() function returns a tibble with the number and
percentage of missing observations in datasets within datacube.
plot(compare_missing(emperors))
Finally, the compare_categories() function help researchers identify
how variables across datasets within a datacube relate to one another in
five categories. Observations are matched by an “ID” variable to
facilitate comparison. The categories here include ‘confirmed’,
‘majority’, ‘unique’, ‘missing’, and ‘conflict’. Observations are
‘confirmed’ if all non-NA values are the same across all datasets, and
‘majority’ if the non-NA values are the same across most datasets.
‘Unique’ observations are present in only one dataset and ‘missing’
observations indicate there are no non-NA values across all datasets for
that variable. Observations are in ‘conflict’ if datasets have different
non-NA values.
plot(compare_categories(emperors, key = "ID"))
#> There were 116 matched observations by ID variable across datasets in datacube.
Consolidating ‘many’ data
To retrieve an individual dataset from this datacube, we can use the
pluck() function.
pluck(emperors, "wikipedia")
However, the real value of the various ‘many packages’ is that multiple
datasets relating to the same phenomenon are presented together.
{manydata} contains flexible methods for consolidating the different
datasets in a datacube into a single dataset. For example, you could
have the rows (observations) from one dataset, but add on some columns
(variables) from another dataset. Where there are conflicts in the
values across the different datasets, there are several ways that these
may be resolved.
The consolidate() function facilitates consolidating a set of
datasets, or a datacube, from a ‘many’ package into a single dataset
with some combination of the rows and columns. The function includes
separate arguments for rows and columns, as well as for how to resolve
conflicts in observations across datasets. The key argument indicates
the column to collapse datasets by. This provides users with
considerable flexibility in how they combine data.
For example, users may wish to see units and variables coded in “any”
dataset (i.e. units or variables present in at least one of the datasets
in the datacube) or units and variables coded in “every” dataset
(i.e. units or variables present in all of the datasets in the
datacube).
consolidate(datacube = emperors, rows = "any", cols = "any",
resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Allectus <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> ?
#> 3 Anastasius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 430
#> 4 Anthemius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 420
#> 5 Antoninus… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 86
#> 6 Antonius … Lanuvium Italia Birt… Natu… Disea… Prin… <NA> <NA> 0086…
#> 7 Arcadius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 377
#> 8 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 9 Aulus Vit… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA>
#> 10 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> # ℹ 128 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>,
#> # Begin <mdate>, End <mdate>
consolidate(datacube = emperors, rows = "every", cols = "every",
resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <mdate> <mdate>
#> 1 Aemilian 0253-08-15~ 0253-10-15~
#> 2 Augustus -0026-01-16 0014-08-19
#> 3 Aurelian 0270-09-15 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198 0217-04-08
#> 6 Carinus 0283-08-01~ 0285-08-01~
#> 7 Carus 0282-10-01~ 0283-08-01~
#> 8 Claudius 0041-01-25 0054-10-13
#> 9 Commodus 0177 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
Users can also choose how they want to resolve conflicts between
observations in consolidate() with several ‘resolve’ methods:
- coalesce: the first non-NA value
- max: the largest value
- min: the smallest value
- mean: the average value
- median: the median value
- random: a random value
consolidate(datacube = emperors, rows = "any", cols = "every", resolve = "max", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-12-31 0253-12-31
#> 2 Allectus 0293 0297
#> 3 Anastasius 0491 0518
#> 4 Anthemius 0467 0472
#> 5 Antoninus Pius 0138 0161
#> 6 Antonius Pius 0138-07-10 0161-03-07
#> 7 Arcadius 0395 0408
#> 8 Augustus -031-12-31 0014-12-31
#> 9 Aulus Vitellius 0069-07 0069-12
#> 10 Aurelian 0270-12-31 0275-12-31
#> # ℹ 128 more rows
consolidate(datacube = emperors, rows = "every", cols = "any", resolve = "min", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 3 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> 4 Balbinus <NA> Unknown Appo… Assa… Praet… Prin… birt… <NA> 0178…
#> 5 Caracalla Lugdunum Gallia Lugdu… Birt… Assa… Other… Prin… reig… <NA> 0188…
#> 6 Carinus <NA> Unknown Birt… Died… Oppos… Prin… deat… <NA> ?
#> 7 Carus Narbo Gallia Narbo… Seiz… Natu… Light… Prin… birt… <NA> 0230…
#> 8 Claudius Lugdunum Gallia Lugdu… Birt… Assa… Wife Prin… birt… Redd… 0009…
#> 9 Commodus Lanuvium Italia Birt… Assa… Praet… Prin… reig… <NA> 0161…
#> 10 Constanti… Arelate Gallia Narbo… Birt… Exec… Other… Domi… birt… <NA> 0316…
#> # ℹ 31 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>, Begin <chr>,
#> # End <chr>
consolidate(datacube = emperors, rows = "every", cols = "every", resolve = "mean", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-08-15~ 0253-10-15~
#> 2 Augustus -0026-01-16 0014-08-19
#> 3 Aurelian 0270-09-15 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198 0217-04-08
#> 6 Carinus 0283-08-01~ 0285-08-01~
#> 7 Carus 0282-10-01~ 0283-08-01~
#> 8 Claudius 0041-01-25 0054-10-13
#> 9 Commodus 0177 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
consolidate(datacube = emperors, rows = "any", cols = "any", resolve = "median", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Allectus <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> ?
#> 3 Anastasius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 430
#> 4 Anthemius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 420
#> 5 Antoninus… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 86
#> 6 Antonius … Lanuvium Italia Birt… Natu… Disea… Prin… <NA> <NA> 0086…
#> 7 Arcadius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 377
#> 8 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 9 Aulus Vit… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA>
#> 10 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> # ℹ 128 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>, Begin <chr>,
#> # End <chr>
consolidate(datacube = emperors, rows = "every", cols = "every", resolve = "random", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-12-31 0253-12-31
#> 2 Augustus -031-12-31 -014-12-31
#> 3 Aurelian 0270-12-31 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198-12-31 0217-12-31
#> 6 Carinus 0283-12-31 0285-12-31
#> 7 Carus 0282-12-31 0283-12-31
#> 8 Claudius 0041-12-31 0054-10-13
#> 9 Commodus 0177-12-31 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
Users can even specify how conflicts for different variables should be
‘resolved’:
consolidate(datacube = emperors, rows = "any", cols = "every", resolve = c(Begin = "min", End = "max"), key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-01-01 0253-12-31
#> 2 Allectus 0293 0297
#> 3 Anastasius 0491 0518
#> 4 Anthemius 0467 0472
#> 5 Antoninus Pius 0138 0161
#> 6 Antonius Pius 0138-07-10 0161-03-07
#> 7 Arcadius 0395 0408
#> 8 Augustus -026-01-16 0014-12-31
#> 9 Aulus Vitellius 0069-07 0069-12
#> 10 Aurelian 0270-01-01 0275-12-31
#> # ℹ 128 more rows
Alternatively, users can “favour” a dataset in a datacube over others:
consolidate(datacube = favour(emperors, "UNRV"), rows = "every", cols = "any", resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 15
#> ID FullName Birth Death CityBirth ProvinceBirth Rise Cause Killer Dynasty
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemi… "Marcus… 207? 253 <NA> Africa Appo… Assa… Other… Gordian
#> 2 Augu… "Gaius … 63 BC 14 Rome Italia Birt… Assa… Wife Julio-…
#> 3 Aure… "Lucius… 214 275 Sirmium Pannonia Appo… Assa… Praet… Gordian
#> 4 Balb… "Decimu… 170? 238 <NA> Unknown Appo… Assa… Praet… Gordian
#> 5 Cara… "born L… 188 217 Lugdunum Gallia Lugdu… Birt… Assa… Other… Severan
#> 6 Cari… "Marcus… ? 285 <NA> Unknown Birt… Died… Oppos… co-emp…
#> 7 Carus "Marcus… 230? 283 Narbo Gallia Narbo… Seiz… Natu… Light… .
#> 8 Clau… "Tiberi… 10 BC 41 Lugdunum Gallia Lugdu… Birt… Assa… Wife Julio-…
#> 9 Comm… "Marcus… 161 192 Lanuvium Italia Birt… Assa… Praet… Adopti…
#> 10 Cons… "Flaviu… 317 340 Arelate Gallia Narbo… Birt… Exec… Other… House …
#> # ℹ 31 more rows
#> # ℹ 5 more variables: Era <chr>, Notes <chr>, Verif <chr>, Begin <mdate>,
#> # End <mdate>
Users can, even, declare multiple key ID columns to consolidate a
datacube or multiple datasets:
consolidate(datacube = emperors, rows = "any", cols = "any", resolve = c(Death = "max", Cause = "coalesce"),
key = c("ID", "Begin"))
#> # A tibble: 202 × 4
#> ID Begin Cause Death
#> <chr> <mdate> <chr> <chr>
#> 1 Aemilian 0253 <NA> 253
#> 2 Aemilian 0253-08-15~ Assassination 0253-10-15~
#> 3 Allectus 0293 <NA> 297
#> 4 Anastasius 0491 <NA> 518
#> 5 Anthemius 0467 <NA> 472
#> 6 Antoninus Pius 0138 <NA> 161
#> 7 Antonius Pius 0138-07-10 Natural Causes 0161-03-07
#> 8 Arcadius 0383 <NA> <NA>
#> 9 Arcadius 0395 <NA> 408
#> 10 Augustus -0026-01-16 Assassination 0014-08-19
#> # ℹ 192 more rows
Cheatsheet
Please see the cheat sheet below for a quick overview:
Contributing to the many packages universe
For more information for developers and data contributors to ‘many
packages’, please see {manypkgs} the
website.
Funding details
Development on this package has been funded by the Swiss National
Science Foundation (SNSF) Grant Number
188976: “Power and Networks
and the Rate of Change in Institutional Complexes” (PANARCHIC).
Try the manydata package in your browser
Any scripts or data that you put into this service are public.
manydata documentation built on May 29, 2024, 8:16 a.m.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
manydata
{manydata} is a portal to ‘many’ packages containing many datacubes,
each containing many related datasets on many issue-domains, actors and
institutions of global governance. These ‘many’ packages are: -
{manyenviron}: contains data on international environmental
agreements - {manytrade}: contains data on international trade
agreements - {manyhealth}: contains data on international health
agreements - {manystates}: contains data on states throughout history
Datasets are related to one another within a datacube through a particular coding system which follows the same principles across the different packages.
For instance, in the data packages on international agreements
(including {manyenviron}, {manytrade}, and {manyhealth}), the
agreements and memberships datacubes have standardised IDs
(manyID), and date variables such as Begin and End that denote the
beginning and end dates of treaties respectively. The beginning date is
derived from the signature or entry into force date, whichever is the
earliest available date for the treaty. Standardised IDs across datasets
allow the same observations to be matched across datasets so that the
values can be compared or expanded where relevant. These specific
variable names allows the comparison of information across datasets that
have different sources. It enables users to point out the recurrence,
difference or absence of observations between the datasets and extract
more robust data when researching on a particular governance domain.
The memberships datacube contains additional date variables on each
state member’s ratification, signature, entry into force, and end dates
for each treaty. Data in the memberships datacube is comparable across
datasets through standardised state names and stateIDs, made possible
with the manypkgs::code_states() function. More information on each
state, including its Begin and End date, can be found in the
{manystates} package.
To enable users to work with the data in these packages, {manydata}
contains tools for:
- calling data packages,
- comparing individual datasets, and
- consolidating datacubes in different ways.
We intend for {manydata} to be useful:
- at the start of a research project, to access and gather recent versions of well-regarded datasets, see what is available, describe, and explore the data,
- in the middle of a project, to facilitate analysis, comparison and modelling, and
- at the end of the project, to help with conducting robustness checks, preparing replication scripts, and writing the next grant application.
Call ‘many’ packages
The easiest way to install {manydata} is directly from CRAN.
install.packages("manydata")
The development version of the package {manydata} can also be
downloaded from GitHub.
# install.packages("remotes")
remotes::install_github("globalgov/manydata")
Once {manydata} is installed, the call_ functions can be used to
discover the ‘many packages’ currently available and/or download or
update these packages when needed. For this, the call_packages() can
be used.
library(manydata)
call_packages() # lists all packages currently available
call_packages("manytrade") # downloads and installs this package
The call_sources() function obtains information about the sources and
original locations of the desired datasets.
call_sources(package = "manydata", datacube = "emperors")
#> # A tibble: 3 × 4
#> Dataset Source URL Mapping
#> <chr> <chr> <chr> <chr>
#> 1 wikipedia Wikipedia, List_of_Roman_emperors, https://en.wikipe… http… from -…
#> 2 UNRV UNRV, Roman Emperor list, https://www.unrv.com/gover… http… from -…
#> 3 britannica Britannica, List of Roman emperors, https://www.brit… http… from -…
Comparing ‘many’ data
The first thing users of the data packages may want to do is to identify
datasets that might contribute to their research goals. One major
advantage of storing datasets in datacubes is that it facilitates the
comparison and analysis of multiple datasets in a specific domain of
global governance. To aid in the selection of datasets and the use of
data within datacubes, the compare_ functions in {manydata} allows
users to quickly compare different information on datacubes and/or
datasets across ‘many packages’. These include comparison for data
observations, variables, and ranges, overlap among observations, missing
observations, and conflicts among observations.
For now, let’s work with the Roman Emperors datacube included in manydata. We can get a quick summary of the datasets included in this package with the following command:
data(package = "manydata")
data(emperors, package = "manydata")
emperors
We can see that there are three named datasets relating to emperors
here: wikipedia (dataset assembled from Wikipedia pages), UNVR
(United Nations of Roman Vitrix), and britannica (Britannica
Encyclopedia List of Roman Emperors). Each of these datasets has their
advantages and so we may wish to understand their similarities and
differences, summarise variables across them, and perhaps also rerun
models across them.
The compare_dimensions() function returns a tibble with the
observations and variables of each dataset within the specified datacube
of a many package.
compare_dimensions(emperors)
#> # A tibble: 3 × 5
#> Dataset Observations Variables Earliest_Date Latest_Date
#> <chr> <chr> <chr> <mdate> <mdate>
#> 1 wikipedia 68 ID, Begin, End, FullName, B… -0026-01-16 0014-08-19
#> 2 UNRV 99 ID, Begin, End, Birth, Deat… -0014-01-01 -0027-12-31
#> 3 britannica 87 ID, Begin, End -0031-01-01 0014-12-31
The compare_ranges() function returns a tibble with the date range
using the earliest and latest dates of each dataset within the specified
datacube of a many package.
compare_ranges(emperors, variable = c("Begin", "End"))
#> # A tibble: 6 × 6
#> Dataset Variable Min Max Mean Median
#> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 wikipedia Begin -026-01-16 -026-01-16 -026-01-16 -026-01-16
#> 2 wikipedia End 0014-08-19 0014-08-19 0014-08-19 0014-08-19
#> 3 UNRV Begin -027-01-01 -027-12-31 -027-07-02 -027-07-02
#> 4 UNRV End -014-01-01 -014-12-31 -014-07-02 -014-07-02
#> 5 britannica Begin -031-01-01 -031-12-31 -031-07-02 -031-07-02
#> 6 britannica End 0014-01-01 0014-12-31 0014-07-02 0014-07-02
The compare_overlap() function returns a tibble with the number of
overlapping observations for a specified variable (specify using the
key argument) across datasets within the datacube.
plot(compare_overlap(emperors, key = "ID"))
The compare_missing() function returns a tibble with the number and
percentage of missing observations in datasets within datacube.
plot(compare_missing(emperors))
Finally, the compare_categories() function help researchers identify
how variables across datasets within a datacube relate to one another in
five categories. Observations are matched by an “ID” variable to
facilitate comparison. The categories here include ‘confirmed’,
‘majority’, ‘unique’, ‘missing’, and ‘conflict’. Observations are
‘confirmed’ if all non-NA values are the same across all datasets, and
‘majority’ if the non-NA values are the same across most datasets.
‘Unique’ observations are present in only one dataset and ‘missing’
observations indicate there are no non-NA values across all datasets for
that variable. Observations are in ‘conflict’ if datasets have different
non-NA values.
plot(compare_categories(emperors, key = "ID"))
#> There were 116 matched observations by ID variable across datasets in datacube.
Consolidating ‘many’ data
To retrieve an individual dataset from this datacube, we can use the
pluck() function.
pluck(emperors, "wikipedia")
However, the real value of the various ‘many packages’ is that multiple
datasets relating to the same phenomenon are presented together.
{manydata} contains flexible methods for consolidating the different
datasets in a datacube into a single dataset. For example, you could
have the rows (observations) from one dataset, but add on some columns
(variables) from another dataset. Where there are conflicts in the
values across the different datasets, there are several ways that these
may be resolved.
The consolidate() function facilitates consolidating a set of
datasets, or a datacube, from a ‘many’ package into a single dataset
with some combination of the rows and columns. The function includes
separate arguments for rows and columns, as well as for how to resolve
conflicts in observations across datasets. The key argument indicates
the column to collapse datasets by. This provides users with
considerable flexibility in how they combine data.
For example, users may wish to see units and variables coded in “any” dataset (i.e. units or variables present in at least one of the datasets in the datacube) or units and variables coded in “every” dataset (i.e. units or variables present in all of the datasets in the datacube).
consolidate(datacube = emperors, rows = "any", cols = "any",
resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Allectus <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> ?
#> 3 Anastasius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 430
#> 4 Anthemius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 420
#> 5 Antoninus… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 86
#> 6 Antonius … Lanuvium Italia Birt… Natu… Disea… Prin… <NA> <NA> 0086…
#> 7 Arcadius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 377
#> 8 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 9 Aulus Vit… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA>
#> 10 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> # ℹ 128 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>,
#> # Begin <mdate>, End <mdate>
consolidate(datacube = emperors, rows = "every", cols = "every",
resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <mdate> <mdate>
#> 1 Aemilian 0253-08-15~ 0253-10-15~
#> 2 Augustus -0026-01-16 0014-08-19
#> 3 Aurelian 0270-09-15 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198 0217-04-08
#> 6 Carinus 0283-08-01~ 0285-08-01~
#> 7 Carus 0282-10-01~ 0283-08-01~
#> 8 Claudius 0041-01-25 0054-10-13
#> 9 Commodus 0177 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
Users can also choose how they want to resolve conflicts between
observations in consolidate() with several ‘resolve’ methods:
- coalesce: the first non-NA value
- max: the largest value
- min: the smallest value
- mean: the average value
- median: the median value
- random: a random value
consolidate(datacube = emperors, rows = "any", cols = "every", resolve = "max", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-12-31 0253-12-31
#> 2 Allectus 0293 0297
#> 3 Anastasius 0491 0518
#> 4 Anthemius 0467 0472
#> 5 Antoninus Pius 0138 0161
#> 6 Antonius Pius 0138-07-10 0161-03-07
#> 7 Arcadius 0395 0408
#> 8 Augustus -031-12-31 0014-12-31
#> 9 Aulus Vitellius 0069-07 0069-12
#> 10 Aurelian 0270-12-31 0275-12-31
#> # ℹ 128 more rows
consolidate(datacube = emperors, rows = "every", cols = "any", resolve = "min", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 3 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> 4 Balbinus <NA> Unknown Appo… Assa… Praet… Prin… birt… <NA> 0178…
#> 5 Caracalla Lugdunum Gallia Lugdu… Birt… Assa… Other… Prin… reig… <NA> 0188…
#> 6 Carinus <NA> Unknown Birt… Died… Oppos… Prin… deat… <NA> ?
#> 7 Carus Narbo Gallia Narbo… Seiz… Natu… Light… Prin… birt… <NA> 0230…
#> 8 Claudius Lugdunum Gallia Lugdu… Birt… Assa… Wife Prin… birt… Redd… 0009…
#> 9 Commodus Lanuvium Italia Birt… Assa… Praet… Prin… reig… <NA> 0161…
#> 10 Constanti… Arelate Gallia Narbo… Birt… Exec… Other… Domi… birt… <NA> 0316…
#> # ℹ 31 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>, Begin <chr>,
#> # End <chr>
consolidate(datacube = emperors, rows = "every", cols = "every", resolve = "mean", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-08-15~ 0253-10-15~
#> 2 Augustus -0026-01-16 0014-08-19
#> 3 Aurelian 0270-09-15 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198 0217-04-08
#> 6 Carinus 0283-08-01~ 0285-08-01~
#> 7 Carus 0282-10-01~ 0283-08-01~
#> 8 Claudius 0041-01-25 0054-10-13
#> 9 Commodus 0177 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
consolidate(datacube = emperors, rows = "any", cols = "any", resolve = "median", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 15
#> ID CityBirth ProvinceBirth Rise Cause Killer Era Notes Verif Birth
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemilian <NA> Africa Appo… Assa… Other… Prin… birt… <NA> 0207…
#> 2 Allectus <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> ?
#> 3 Anastasius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 430
#> 4 Anthemius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 420
#> 5 Antoninus… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 86
#> 6 Antonius … Lanuvium Italia Birt… Natu… Disea… Prin… <NA> <NA> 0086…
#> 7 Arcadius <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> 377
#> 8 Augustus Rome Italia Birt… Assa… Wife Prin… birt… Redd… 0062…
#> 9 Aulus Vit… <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA> <NA>
#> 10 Aurelian Sirmium Pannonia Appo… Assa… Praet… Prin… <NA> <NA> 0214…
#> # ℹ 128 more rows
#> # ℹ 5 more variables: Death <chr>, FullName <chr>, Dynasty <chr>, Begin <chr>,
#> # End <chr>
consolidate(datacube = emperors, rows = "every", cols = "every", resolve = "random", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-12-31 0253-12-31
#> 2 Augustus -031-12-31 -014-12-31
#> 3 Aurelian 0270-12-31 0275-09-15
#> 4 Balbinus 0238-04-22 0238-07-29
#> 5 Caracalla 0198-12-31 0217-12-31
#> 6 Carinus 0283-12-31 0285-12-31
#> 7 Carus 0282-12-31 0283-12-31
#> 8 Claudius 0041-12-31 0054-10-13
#> 9 Commodus 0177-12-31 0192-12-31
#> 10 Constantine II 0337-05-22 0340-01-01
#> # ℹ 31 more rows
Users can even specify how conflicts for different variables should be ‘resolved’:
consolidate(datacube = emperors, rows = "any", cols = "every", resolve = c(Begin = "min", End = "max"), key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 138 × 3
#> ID Begin End
#> <chr> <chr> <chr>
#> 1 Aemilian 0253-01-01 0253-12-31
#> 2 Allectus 0293 0297
#> 3 Anastasius 0491 0518
#> 4 Anthemius 0467 0472
#> 5 Antoninus Pius 0138 0161
#> 6 Antonius Pius 0138-07-10 0161-03-07
#> 7 Arcadius 0395 0408
#> 8 Augustus -026-01-16 0014-12-31
#> 9 Aulus Vitellius 0069-07 0069-12
#> 10 Aurelian 0270-01-01 0275-12-31
#> # ℹ 128 more rows
Alternatively, users can “favour” a dataset in a datacube over others:
consolidate(datacube = favour(emperors, "UNRV"), rows = "every", cols = "any", resolve = "coalesce", key = "ID")
#> There were 116 matched observations by ID variable across datasets in datacube.
#> # A tibble: 41 × 15
#> ID FullName Birth Death CityBirth ProvinceBirth Rise Cause Killer Dynasty
#> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr> <chr>
#> 1 Aemi… "Marcus… 207? 253 <NA> Africa Appo… Assa… Other… Gordian
#> 2 Augu… "Gaius … 63 BC 14 Rome Italia Birt… Assa… Wife Julio-…
#> 3 Aure… "Lucius… 214 275 Sirmium Pannonia Appo… Assa… Praet… Gordian
#> 4 Balb… "Decimu… 170? 238 <NA> Unknown Appo… Assa… Praet… Gordian
#> 5 Cara… "born L… 188 217 Lugdunum Gallia Lugdu… Birt… Assa… Other… Severan
#> 6 Cari… "Marcus… ? 285 <NA> Unknown Birt… Died… Oppos… co-emp…
#> 7 Carus "Marcus… 230? 283 Narbo Gallia Narbo… Seiz… Natu… Light… .
#> 8 Clau… "Tiberi… 10 BC 41 Lugdunum Gallia Lugdu… Birt… Assa… Wife Julio-…
#> 9 Comm… "Marcus… 161 192 Lanuvium Italia Birt… Assa… Praet… Adopti…
#> 10 Cons… "Flaviu… 317 340 Arelate Gallia Narbo… Birt… Exec… Other… House …
#> # ℹ 31 more rows
#> # ℹ 5 more variables: Era <chr>, Notes <chr>, Verif <chr>, Begin <mdate>,
#> # End <mdate>
Users can, even, declare multiple key ID columns to consolidate a datacube or multiple datasets:
consolidate(datacube = emperors, rows = "any", cols = "any", resolve = c(Death = "max", Cause = "coalesce"),
key = c("ID", "Begin"))
#> # A tibble: 202 × 4
#> ID Begin Cause Death
#> <chr> <mdate> <chr> <chr>
#> 1 Aemilian 0253 <NA> 253
#> 2 Aemilian 0253-08-15~ Assassination 0253-10-15~
#> 3 Allectus 0293 <NA> 297
#> 4 Anastasius 0491 <NA> 518
#> 5 Anthemius 0467 <NA> 472
#> 6 Antoninus Pius 0138 <NA> 161
#> 7 Antonius Pius 0138-07-10 Natural Causes 0161-03-07
#> 8 Arcadius 0383 <NA> <NA>
#> 9 Arcadius 0395 <NA> 408
#> 10 Augustus -0026-01-16 Assassination 0014-08-19
#> # ℹ 192 more rows
Cheatsheet
Please see the cheat sheet below for a quick overview:
Contributing to the many packages universe
For more information for developers and data contributors to ‘many
packages’, please see {manypkgs} the
website.
Funding details
Development on this package has been funded by the Swiss National Science Foundation (SNSF) Grant Number 188976: “Power and Networks and the Rate of Change in Institutional Complexes” (PANARCHIC).
Try the manydata package in your browser
Any scripts or data that you put into this service are public.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
Embedding an R snippet on your website
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.