View source: R/mnet_read_mts.R
mnet_read_mts | R Documentation |
Read an Oklahoma Mesonet time series file
mnet_read_mts(file_path)
file_path |
file path to a single Oklahoma Mesonet time series (MTS) file |
A data frame with Oklahoma Mesonet data. See
mnet_variable_definition()
or the table below for the ID, variable name,
unit and description for each column.
ID | Name | Unit | Description |
PRES | Station Atmospheric Pressure | kPa | 5-minute averaged atmospheric pressure. |
RAIN | Precipitation | millimeters | Liquid precipitation accumulation since 0000 UTC. Frozen precipitation cannot be recorded until it melts; therefore, precipitation from snow may not be recorded until several days after the snow event. |
RELH | Relative Humidity | percent | 5-minute averaged relative humidity at 1.5m. |
SRAD | Solar Radiation | watts per square meter | 5-minute averaged downwelling global solar radiation. |
STID | Station ID | Station ID | |
STNM | Station Number | Station Number | |
TA9M | Air Temperature at 9m | degrees Celsius | 5-minute averaged air temperature at 9m |
TAIR | Air Temperature | degrees Celsius | 5-minute averaged air temperature at 1.5m. |
TB05 | Temperature Under Bare Soil at 5cm | degrees Celsius | 15-minute averaged temperature under bare soil at 5cm. This variable is only available prior to December 1, 2013. |
TB10 | Temperature Under Bare Soil at 10cm | degrees Celsius | 15-minute averaged temperature under bare soil at 10cm. |
TIME | Time | minutes after base time | Minutes after base time (typically 0000 UTC) |
TR05 | Soil Moisture Calibrated Delta-T at 5cm | degrees Celsius | 30-minute calibrated change in temperature of soil over time after a heat pulse is introduced. Used to calculate soil water potential, fractional water index, or volumetric water. |
TR25 | Soil Moisture Calibrated Delta-T at 25cm | degrees Celsius | 30-minute calibrated change in temperature of soil over time after a heat pulse is introduced. Used to calculate soil water potential, fractional water index, or volumetric water. |
TR60 | Soil Moisture Calibrated Delta-T at 60cm | degrees Celsius | 30-minute calibrated change in temperature of soil over time after a heat pulse is introduced. Used to calculate soil water potential, fractional water index, or volumetric water. |
TR75 | Soil Moisture Calibrated Delta-T at 75cm | degrees Celsius | 30-minute calibrated change in temperature of soil over time after a heat pulse is introduced. Used to calculate soil water potential, fractional water index, or volumetric water. |
TS05 | Temperature Under Native Vegetation at 5cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 5cm. |
TS10 | Temperature Under Native Vegetation at 10cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 10cm. |
TS25 | Temperature Under Native Vegetation at 25cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 25cm. This variable is only available after and including December 1, 2013. |
TS30 | Temperature Under Native Vegetation at 30cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 30cm. This variable is only available prior to December 1, 2013. |
TS45 | Temperature Under Native Vegetation at 45cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 45cm. |
TS60 | Temperature Under Native Vegetation at 60cm | degrees Celsius | 15-minute averaged temperature under native vegetation at 60cm. This variable is only available after and including December 1, 2013. |
VW05 | Volumetric soil water Under Native Vegetation at 5cm | cm^3^ cm^-3^ | 5-minute averaged volumetric soil water under native vegetation at 5cm. |
VW25 | Volumetric soil water Under Native Vegetation at 25cm | cm^3^ cm^-3^ | 5-minute averaged volumetric soil water under native vegetation at 25cm. |
VW45 | Volumetric soil water Under Native Vegetation at 45cm | cm^3^ cm^-3^ | 5-minute averaged volumetric soil water under native vegetation at 45cm. |
WDIR | Wind Direction | degrees | 5-minute averaged wind direction at 10m. |
WDSD | Wind Direction Standard Deviation | degrees | Standard deviation of wind direction during the 5-minute interval. |
WMAX | Maximum Wind Speed | meters per second | Highest 3-second wind speed at 10m sample. |
WS2M | 2m Wind Speed | meters per second | 5-minute averaged wind speed at 2m |
WSPD | Wind Speed | meters per second | 5-minute averaged wind speed at 10m. |
WSSD | Wind Speed Standard Deviation | meters per second | Standard deviation of wind speed during the 5-minute interval. |
WVEC | Wind Vector | meters per second | 5-minute averaged wind velocity (speed and direction accounted for) at 10m. |
# Create example file cache
local_cache <- mnet_test_cache(mts_files = TRUE)
example_file <- file.path(local_cache, "mts/1994/01/01/19940101acme.mts")
# Read data from example file
mnet_read_mts(example_file)
# Clean up example file cache
unlink(local_cache, recursive = TRUE)
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.