Cate and Nelson (1965)

In soiltestcorr: Soil Test Correlation and Calibration

knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>",
  fig.width=6, 
  fig.height=4
)

Description

The soiltestcorr-package also allows users to implement the quadrants analysis approach, also known as the Cate-Nelson analysis. This tutorial is intended to show how to deploy the cate_nelson_1965() function for estimating critical soil test values based on Cate and Nelson (1965). This approach is also known as the "graphical" version of the Cate-Nelson analysis. This method applies an arbitrary fixed value of ry as a target (y-axis) that divides the data into two categories (below & equal or above ry target). In a second stage, it estimates the CSTV (x-axis) as the minimum stv that divides the data into four quadrants (target ry level combined with STV lower or greater than the CSTV) maximizing the number of points under well-classified quadrants (II, stv >= CSTV & ry >= ry target; and IV, stv < CSTV & ry < RY target).

General Instructions

i. Load your dataframe with soil test value (stv) and relative yield (ry) data.

ii. Specify the following arguments into the function -cate_nelson_1965()-:

(a). data (optional),

(b). stv (soil test value) and ry (relative yield) columns or vectors,

(c). plot TRUE (produces a ggplot as main output) or FALSE (DEFAULT, only produces a list or data.frame),

(d). tidy TRUE (produces a data.frame with results) or FALSE (store results as list),

iii. Run and check results.

iv. Adjust plot as desired.

Tutorial

library(soiltestcorr)

Suggested packages

# Install if needed 
library(ggplot2) # Plots
library(dplyr) # Data wrangling
library(tidyr) # Data wrangling
library(utils) # Data wrangling
library(purrr) # Mapping

This is a basic example using three different datasets:

Load datasets

# Example 1 dataset
# Fake dataset manually created
data_1 <- data.frame("RY"  = c(65,80,85,88,90,94,93,96,97,95,98,100,99,99,100),
                     "STV" = c(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15))

# Example 2. Native fake dataset from soiltestcorr package

data_2 <- soiltestcorr::data_test


# Example 3. Native dataset from soiltestcorr package, Freitas et al.  (1966), used by Cate & Nelson (1971)
data_3 <- soiltestcorr::freitas1966

Fit cate_nelson_1965()

1. Individual fits

RY target = 90%, replace with your desired value

1.1. tidy = FALSE

It returns a LIST (more efficient for multiple fits at once)

# Using dataframe argument, tidy = FALSE -> return a LIST
fit_1_tidy_false <- 
  soiltestcorr::cate_nelson_1965(data = data_1,
                                 ry = RY,
                                 stv = STV,
                                 target = 90,
                                 tidy = FALSE,
                                 plot = FALSE)

utils::head(fit_1_tidy_false)

1.2. tidy = TRUE

It returns a data.frame (more organized results)

# Using dataframe argument, tidy = FALSE -> return a LIST
fit_1_tidy_false <- 
  soiltestcorr::cate_nelson_1965(data = data_1,
                                 ry = RY,
                                 stv = STV,
                                 target = 90,
                                 tidy = TRUE)

utils::head(fit_1_tidy_false)

1.3. Alternative using the vectors

You can call stv and ry vectors using the $.

The tidy argument still applies for controlling the output type

fit_1_vectors_list <-
  soiltestcorr::cate_nelson_1965(ry = data_1$RY,
                                 stv = data_1$STV, 
                                 target=90,
                                 tidy = FALSE)

fit_1_vectors_tidy <-
  soiltestcorr::cate_nelson_1965(ry = data_1$RY,
                                 stv = data_1$STV, 
                                 target=90,
                                 tidy = TRUE)

1.4. Data 2. Test dataset

fit_2 <-
  soiltestcorr::cate_nelson_1965(data = data_2,
                                 ry = RY,
                                 stv = STV,
                                 target = 90,
                                 tidy = TRUE)

utils::head(fit_2)

1.5. Data 3. Freitas et al. 1966

fit_3 <-
  soiltestcorr::cate_nelson_1965(data = data_3,
                                 ry = RY,
                                 stv = STK,
                                 target = 90,
                                 tidy = TRUE)

utils::head(fit_3)

2. Multiple fits at once

2.1. Using map

Create nested data

Note: the stv column needs to have the same name for all datasets

# 
data.all <- dplyr::bind_rows(data_1, data_2,
                      data_3 %>% dplyr::rename(STV = STK),
                     .id = "id") %>% 
  tidyr::nest(data = c("STV", "RY"))

Fit

# Run multiple examples at once with map()
fit_multiple_map = data.all %>%
  dplyr::mutate(mod_alcc = purrr::map(data, ~ soiltestcorr::cate_nelson_1965(ry = .$RY,
                                                              stv = .$STV,
                                                              target=90,
                                                              tidy = TRUE)))

utils::head(fit_multiple_map)

2.2. Using group_map

Alternatively, with group_map, we do not require nested data.

However, it requires to dplyr::bind_rows and add an id column specifying the name of each dataset.

This option return models as lists objects.

fit_multiple_group_map <- 
  data.all %>% tidyr::unnest(data) %>% 
  #dplyr::bind_rows(data_1, data_2, .id = "id") %>% 
  dplyr::group_by(id) %>% 
  dplyr::group_map(~ soiltestcorr::cate_nelson_1965(data = ., 
                                     ry = RY,
                                     stv = STV, 
                                     target = 90, 
                                     tidy = TRUE))

utils::head(fit_multiple_group_map)

3. Bootstrapping

A suitable alternative for obtaining confidence intervals for parameters or derived quantities is bootstrapping.

Bootstrapping is a resampling technique (with replacement) that draws samples from the original data with the same size. If you have groups within your data, you can specify grouping variables as arguments in order to maintain, within each resample, the same proportion of observations than in the original dataset.

This function returns a table with as many rows as the resampling size (n) containing the results for each resample.

boot_cn65 <- boot_cn_1965(data = data_3,
                          ry = RY, stv = STK, target = 90,
                          n = 99)

boot_cn65 %>% dplyr::slice_head(., n=5)

# CSTV Confidence Interval
quantile(boot_cn65$CSTV, probs = c(0.025, 0.5, 0.975))

# Plot
boot_cn65 %>% 
  ggplot2::ggplot(aes(x = CSTV))+
  geom_histogram(color = "grey25", fill = "#9de0bf", bins = 10)

4. Plots

4.1. Calibration Curve

We can generate a ggplot with the same mod_alcc() function.

We just need to specify the argument plot = TRUE.

soiltestcorr::cate_nelson_1965(data = data_1, 
                       ry = RY, 
                       stv = STV, 
                       target=90, 
                       plot = TRUE)

soiltestcorr::cate_nelson_1965(data = data_2, 
                       ry = RY, 
                       stv = STV, 
                       target=90, 
                       plot = TRUE)

soiltestcorr::cate_nelson_1965(data = data_3, 
                       ry = RY, 
                       stv = STK, 
                       target=90, 
                       plot = TRUE)

References

*Cate, R.B. Jr., and Nelson, L.A., 1965. A rapid method for correlation of soil test analysis with plant response data. North Carolina Agric. Exp. Stn., International soil Testing Series Bull. No. 1. *

Try the soiltestcorr package in your browser

library(soiltestcorr) help(soiltestcorr)

Run

Any scripts or data that you put into this service are public.

Nothing

soiltestcorr documentation built on July 3, 2024, 5:08 p.m.