Cluster Wild Bootstrapping for Meta-Analysis

In wildmeta: Cluster Wild Bootstrapping for Meta-Analysis

knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)

Dependence in Meta-Analysis

Typical methods to conduct meta-analysis or meta-regression work under the assumption that the effect size estimates are independent. However, primary studies often report multiple, statistically dependent estimates of effect sizes. Dependent effect sizes can occur through correlated effects structure, a hierarchical effects structure, or a combination of the two [@hedges_robust_2010; @pustejovsky2020meta]. A correlated effects data structure typically occurs due to multiple correlated measures of an outcome, repeated measures of the outcome data, or comparison of multiple treatment groups to the same control group [@hedges_robust_2010]. A hierarchical effects structure typically occurs when the meta-analysis includes multiple primary studies conducted by the same researcher, by the same lab, or in the same region [@hedges_robust_2010].

Researchers may be inclined to ignore dependence and use methods that assume that each effect size estimate is independent. However, doing so can result in inaccurate standard errors and, consequently, hypothesis tests with incorrect Type I error rates and confidence intervals with incorrect coverage levels [@becker2000multivariate]. Ad-hoc methods for handling dependence include averaging effect sizes by study or selecting a single effect size per study. These methods result in loss of information and are not suitable for studying within-study variation in effect sizes [@hedges_robust_2010]. A method called shifting the unit-of-analysis involves running meta-analytic models for different subsets of the data [@cooper1998synthesizing]. However, this strategy is not useful if a researcher wants to summarize effects across the subsets or study differential effects [@becker2000multivariate].

The ideal solution for handling dependence would be to use a multivariate model [@becker2000multivariate; @hedges_robust_2010]. This approach explicitly models dependence among the effect sizes [@becker2000multivariate; @hedges_robust_2010]. However, multivariate meta-analysis requires knowledge of correlations or covariances between pairs of effect size estimates within each study, which are often difficult to obtain from primary studies.

To handle dependence without knowing the covariance structure between effect size estimates, @hedges_robust_2010 proposed the use of robust variance estimation (RVE). RVE involves estimating the variances for the meta-regression model's coefficients using sandwich estimators that are valid even when the covariance structure is unknown or mis-specified [@hedges_robust_2010]. However, the performance characteristics of RVE are asymptotic in that a large number of clusters or studies is required to provide accurate standard error estimates [@hedges_robust_2010]. If the number of studies in a meta-analysis is small, RVE, as originally proposed by @hedges_robust_2010, can result in downwardly biased standard errors and inflation of Type I error rates [@hedges_robust_2010; @tipton_small_2015].

@tipton_small_2015 and @tipton_small-sample_2015 examined several small sample correction methods to improve the performance of RVE. @tipton_small_2015 recommended CR2 type correction for RVE as well as the use of Satterthwaite degrees of freedom for single coefficient tests. @tipton_small-sample_2015 examined corrections for multiple-contrast hypothesis tests. @tipton_small-sample_2015 found that the HTZ test, which is an extension of the CR2 correction method with the Satterthwaite degrees of freedom, controlled Type 1 error rate adequately even when the number of studies was small. However, @joshi2022cluster showed, through simulations, that the HTZ test can be conservative. The authors examined another method, cluster wild bootstrapping (CWB), that has been studied in the econometrics literature but not in the meta-analytic context. The results of the simulations from @joshi2022cluster showed that CWB adequately controlled for Type 1 error rate and provided higher power than the HTZ test, especially for multiple-contrast hypothesis tests.

Bootstrapping

General bootstrapping can be used to estimate measures of uncertainty, like standard errors, p-values and confidence intervals, even when other methods fail [@boos2003introduction]. Bootstrapping involves re-sampling from the original data many times to create an empirical distribution which is used in place of the distribution of an estimate or test statistic [@boos2003introduction].

Several bootstrapping data generating processes are available. The most common one is pair bootstrapping, which involves re-sampling with replacement the set of outcome and covariate data for each case [@freedman1981bootstrapping; @freedman1984bootstrapping]. For data involving clusters, the entire cluster is re-sampled [@cameron_bootstrap-based_nodate]. In meta-analytic studies with small number of clusters, pairs bootstrapping can result in lack of variance in the distribution of covariates rendering estimation of coefficients infeasible [@cameron_bootstrap-based_nodate].

Another type of bootstrapping involves re-sampling residuals [@cameron_bootstrap-based_nodate]. In case with clusters, entire vector of residuals for each cluster is re-sampled [@cameron_bootstrap-based_nodate; @mackinnon2009bootstrap]. Such a procedure requires clusters to be of equal size and has an underlying assumption that the errors are independently and identically distributed [@mackinnon2009bootstrap].

An ideal way to bootstrap when the number of clusters is small is to use cluster wild bootstrapping, which involves sampling weights and multiplying residuals with the random weights [@cameron_bootstrap-based_nodate; @mackinnon2009bootstrap]. In contrast to the process of pair bootstrapping, the process of CWB does not involve re-sampling the distribution of predictor variables. Thus, the problem of lack of variance in covariates due to re-sampling does not occur with CWB [@cameron_bootstrap-based_nodate; @mackinnon2009bootstrap]. Further, in contrast to residual bootstrapping, CWB does not require clusters to have the same size and does not require the errors to be independently and identically distributed [@cameron_bootstrap-based_nodate; @mackinnon2009bootstrap].

Cluster Wild Bootstrapping

This section provides an overview of the cluster wild bootstrapping algorithm.

@mackinnon2009bootstrap recommended imposing the null hypothesis when running bootstrap hypothesis tests as the process of hypothesis testing involves examining where the test statistic lies on the the sampling distribution based on the null hypothesis. For weights to use in cluster wild bootstrapping, @mackinnon2015wild and @webb2013reworking have shown that the Rademacher weights, which take on the values of -1 and 1 with the probability of 0.5 each, outperform all other types of weights for studies with number of clusters as low as 10.

The general process of conducting cluster wild bootstrapping is as follows [@cameron_bootstrap-based_nodate; @mackinnon2009bootstrap]:

1. Fit a null model and a full model on the original data.

2. Obtain residuals from the null model.

3. Generate an auxiliary random variable that has mean of 0 and variance of 1 and multiply the residuals by the random variable (e.g., Rademacher weights) set to be constant within clusters (CWB). The residuals can also be multiplied by CR2 adjustment matrices before multiplying by weights (CWB Adjusted). Adjusting the residuals by CR2 matrices can correct the under-estimation of the error variance when the working model is incorrect [@pustejovsky_small-sample_2018; @mackinnon2006bootstrap; @davidson_wild_2008].

4. Obtain new outcome scores by adding the transformed residuals to the predicted values from the null model fit on the original data.

5. Re-estimate the full model with the new calculated outcome scores and obtain the test statistic.

6. Repeat steps 3-5 $R$ times. Calculate p-value:

$$p = \frac{1}{R} \sum_{r = 1}^R I\left(F^{(r)} > F\right)$$

The results of the simulation studies conducted in @joshi2022cluster did not show any difference in Type 1 error rates or power when multiplying the results by CR2 adjustments matrices. However, the authors did not study major mis-specifications of the working model in the simulation studies.

Example from wildmeta

This section presents examples of how to implement cluster wild bootstrapping using functions from our wildmeta package. The functions in our package work with models fit using robumeta::robu() [@robu_2020] and metafor::rma.mv() [@viechtbauer2010conducting].

robumeta models

The examples in this vignette utilize the SATCoaching dataset from the clubSandwich package [@pusto_2020], originally from @dersimonian1983evaluating. The standardized mean differences represent the effects of SAT coaching on SAT verbal (SATV) and/or SAT math (SATM) scores.

The code below runs cluster wild bootstrapping to test the multiple-contrast hypothesis that the effect of coaching does not differ based on study type. The study_type variable indicates whether groups compared in primary studies were matched, randomized, or non-equivalent. The meta-regression model also controls for hours of coaching provided (hrs) and whether the students took math or verbal test (test). Below, we run a zero-intercept meta-regression model.

The Wald_test_cwb() function takes in a full model fit using the robumeta::robu() function. Further, users need to specify the constraint to be tested. Below, we create a constraint matrix using clubSandwich::constrain_equal(); indices 1 to 3 correspond to the three levels of the study_type variable. Users can specify the number of bootstrap replications R. In the examples below, we set the value to 99 to speed up computation time. In practice, we recommend using a higher number of bootstrap replications, such as 1999. Using more replications will improve power. Please see @davidson2000bootstrap for guidance on the number of bootstrap replications to use. Users can also set the seed in the Wald_test_cwb() function.

library(wildmeta)
library(clubSandwich)
library(robumeta)

robu_model <- robu(d ~ 0 + study_type + hrs + test,
                   studynum = study,
                   var.eff.size = V,
                   small = FALSE,
                   data = SATcoaching)

Wald_test_cwb(full_model = robu_model,
              constraints = constrain_equal(1:3),
              R = 99,
              seed = 20201228)

The output of the function contains the name of the test, the adjustment used for the bootstrap process, the type of variance-covariance matrix used, the type of test statistic, the number of bootstrap replicates, and the bootstrapped p-value.

The users can also specify whether to adjust the residuals with CR1 to CR4matrices when bootstrapping as below. The default value for the adjust argument is set to CR0. Below is an example where we set the adjust the residuals using CR2 matrices.

Wald_test_cwb(full_model = robu_model,
              constraints = constrain_equal(1:3),
              R = 99,
              adjust = "CR2",
              seed = 20201229)

metafor models

In the examples above, we used the robumeta::robu() function to fit the full model. In this section, we fit the full model using the metafor::rma.mv() function. (We use a small, entirely insufficient number of replications in order to limit the computing time of this vignette.)

library(metafor)

rma_model <- rma.mv(yi = d ~ 0 + study_type + hrs + test,
                    V = V,
                    random = ~ study_type | study,
                    data = SATcoaching,
                    subset = !is.na(hrs) & !is.na(test))

Wald_test_cwb(full_model = rma_model,
              constraints = constrain_equal(1:3),
              R = 19,
              seed = 20210314)

Timing

robumeta models

The Wald_test_cwb() function runs within a minute for correlated effects models even when using a large number of bootstrap replications. Below is an example with 1999 bootstrap replications.

system.time(
  res <- Wald_test_cwb(full_model = robu_model,
                       constraints = constrain_equal(1:3),
                       R = 1999, 
                       seed = 20201229)
)

Computation speed can sometimes be improved by setting a parallel processing plan using the future package:

library(future)

if (parallelly::supportsMulticore()) {
  plan(multicore) 
} else {
  plan(multisession)
}

nbrOfWorkers()

system.time(
  res <- Wald_test_cwb(full_model = robu_model,
                       constraints = constrain_equal(1:3),
                       R = 1999, 
                       seed = 20201229)
)

plan(sequential)

metafor models

reps <- 99L

CWB takes longer with models fit using metafor::rma.mv(). Below is an example with r reps bootstrap replications:

reps

system.time(
  res_seq <- Wald_test_cwb(full_model = rma_model,
                           constraints = constrain_equal(1:3),
                           R = reps,
                           seed = 20210314)
)

res_seq

Again, computation speed can sometimes be improved by setting a parallel processing plan using the future package:

library(future)

if (parallelly::supportsMulticore()) {
  plan(multicore) 
} else {
  plan(multisession)
}

nbrOfWorkers()

system.time(
  res_para <- Wald_test_cwb(full_model = rma_model,
                            constraints = constrain_equal(1:3),
                            R = reps,
                            seed = 20210314)
)

plan(sequential)

res_para

Bootstrap Distribution Plot

The function plot() creates a ggplot figure representing the distribution of the bootstrap replicates based on the results from the Wald_test_cwb() function. The dashed line represents the $F$ test statistic from the original full model. The bootstrapped p-value is the proportion of bootstrapped $F$ test statistics that are greater than the original $F$ statistic.

plot(res, fill = "darkred", alpha = 0.5)

References

wildmeta documentation built on March 31, 2023, 5:23 p.m.