knitr::opts_chunk$set( collapse = TRUE, comment = "#>" )
Rather than using class()
and length()
, vctrs has notions of prototype (vec_ptype_show()
) and size (vec_size()
). This vignette discusses the motivation for why these alternatives are necessary and connects their definitions to type coercion and the recycling rules.
Size and prototype are motivated by thinking about the optimal behaviour for c()
and rbind()
, particularly inspired by data frames with columns that are matrices or data frames.
library(vctrs)
The idea of a prototype is to capture the metadata associated with a vector without capturing any data. Unfortunately, the class()
of an object is inadequate for this purpose:
The class()
doesn't include attributes. Attributes are important because,
for example, they store the levels of a factor and the timezone of a
POSIXct
. You cannot combine two factors or two POSIXct
s without
thinking about the attributes.
The class()
of a matrix is "matrix" and doesn't include the type of the
underlying vector or the dimensionality.
Instead, vctrs takes advantage of R's vectorised nature and uses a prototype, a 0-observation slice of the vector (this is basically x[0]
but with some subtleties we'll come back to later). This is a miniature version of the vector that contains all of the attributes but none of the data.
Conveniently, you can create many prototypes using existing base functions (e.g, double()
and factor(levels = c("a", "b"))
). vctrs provides a few helpers (e.g. new_date()
, new_datetime()
, and new_duration()
) where the equivalents in base R are missing.
vec_ptype()
creates a prototype from an existing object. However, many base vectors have uninformative printing methods for 0-length subsets, so vctrs also provides vec_ptype_show()
, which prints the prototype in a friendly way (and returns nothing).
Using vec_ptype_show()
allows us to see the prototypes base R classes:
Atomic vectors have no attributes and just display the underlying typeof()
:
r
vec_ptype_show(FALSE)
vec_ptype_show(1L)
vec_ptype_show(2.5)
vec_ptype_show("three")
vec_ptype_show(list(1, 2, 3))
The prototype of matrices and arrays include the base type and the dimensions after the first:
r
vec_ptype_show(array(logical(), c(2, 3)))
vec_ptype_show(array(integer(), c(2, 3, 4)))
vec_ptype_show(array(character(), c(2, 3, 4, 5)))
The prototype of a factor includes its levels. Levels are a character vector, which can be arbitrarily long, so the prototype just shows a hash. If the hash of two factors is equal, it's highly likely that their levels are also equal.
r
vec_ptype_show(factor("a"))
vec_ptype_show(ordered("b"))
While vec_ptype_show()
prints only the hash, the prototype object itself does
contain all levels:
r
vec_ptype(factor("a"))
Base R has three key date time classes: dates, date-times (POSIXct
),
and durations (difftime)
. Date-times have a timezone, and durations have
a unit.
r
vec_ptype_show(Sys.Date())
vec_ptype_show(Sys.time())
vec_ptype_show(as.difftime(10, units = "mins"))
Data frames have the most complex prototype: the prototype of a data frame is the name and prototype of each column:
r
vec_ptype_show(data.frame(a = FALSE, b = 1L, c = 2.5, d = "x"))
Data frames can have columns that are themselves data frames, making this a "recursive" type:
r
df <- data.frame(x = FALSE)
df$y <- data.frame(a = 1L, b = 2.5)
vec_ptype_show(df)
It's often important to combine vectors with multiple types. vctrs provides a consistent set of rules for coercion, via vec_ptype_common()
. vec_ptype_common()
possesses the following invariants:
class(vec_ptype_common(x, y))
equals class(vec_ptype_common(y, x))
.
class(vec_ptype_common(x, vec_ptype_common(y, z))
equals
class(vec_ptype_common(vec_ptype_common(x, y), z))
.
vec_ptype_common(x, NULL) == vec_ptype(x)
.
i.e., vec_ptype_common()
is both commutative and associative (with respect to class) and has an identity element, NULL
; i.e., it's a commutative monoid. This means the underlying implementation is quite simple: we can find the common type of any number of objects by progressively finding the common type of pairs of objects.
Like with vec_ptype()
, the easiest way to explore vec_ptype_common()
is with vec_ptype_show()
: when given multiple inputs, it will print their common prototype. (In other words: program with vec_ptype_common()
but play with vec_ptype_show()
.)
The common type of atomic vectors is computed very similar to the rules of base R, except that we do not coerce to character automatically:
```r vec_ptype_show(logical(), integer(), double())
vec_ptype_show(logical(), character()) ```
Matrices and arrays are automatically broadcast to higher dimensions:
```r vec_ptype_show( array(1, c(0, 1)), array(1, c(0, 2)) )
vec_ptype_show( array(1, c(0, 1)), array(1, c(0, 3)), array(1, c(0, 3, 4)), array(1, c(0, 3, 4, 5)) ) ```
Provided that the dimensions follow the vctrs recycling rules:
r
vec_ptype_show(
array(1, c(0, 2)),
array(1, c(0, 3))
)
Factors combine levels in the order in which they appear.
```r fa <- factor("a") fb <- factor("b")
levels(vec_ptype_common(fa, fb)) levels(vec_ptype_common(fb, fa)) ```
Combining a date and date-time yields a date-time:
r
vec_ptype_show(new_date(), new_datetime())
When combining two date times, the timezone is taken from the first input:
r
vec_ptype_show(
new_datetime(tzone = "US/Central"),
new_datetime(tzone = "Pacific/Auckland")
)
Unless it's the local timezone, in which case any explicit time zone will win:
r
vec_ptype_show(
new_datetime(tzone = ""),
new_datetime(tzone = ""),
new_datetime(tzone = "Pacific/Auckland")
)
The common type of two data frames is the common type of each column that occurs in both data frames:
r
vec_ptype_show(
data.frame(x = FALSE),
data.frame(x = 1L),
data.frame(x = 2.5)
)
And the union of the columns that only occur in one:
r
vec_ptype_show(data.frame(x = 1, y = 1), data.frame(y = 1, z = 1))
Note that new columns are added on the right-hand side. This is consistent with the way that factor levels and time zones are handled.
vec_ptype_common()
finds the common type of a set of vector. Typically, however, what you want is a set of vectors coerced to that common type. That's the job of vec_cast_common()
:
str(vec_cast_common( FALSE, 1:5, 2.5 )) str(vec_cast_common( factor("x"), factor("y") )) str(vec_cast_common( data.frame(x = 1), data.frame(y = 1:2) ))
Alternatively, you can cast to a specific prototype using vec_cast()
:
# Cast succeeds vec_cast(c(1, 2), integer()) # Cast fails vec_cast(c(1.5, 2.5), factor("a"))
If a cast is possible in general (i.e., double -> integer), but information is lost for a specific input (e.g. 1.5 -> 1), it will generate an error.
vec_cast(c(1.5, 2), integer())
You can suppress the lossy cast errors with allow_lossy_cast()
:
allow_lossy_cast( vec_cast(c(1.5, 2), integer()) )
This will suppress all lossy cast errors. Supply prototypes if you want to be specific about the type of lossy cast allowed:
allow_lossy_cast( vec_cast(c(1.5, 2), integer()), x_ptype = double(), to_ptype = integer() )
The set of casts should not be more permissive than the set of coercions. This is not enforced but it is expected from classes to follow the rule and keep the coercion ecosystem sound.
vec_size()
was motivated by the need to have an invariant that describes the number of "observations" in a data structure. This is particularly important for data frames, as it's useful to have some function such that f(data.frame(x))
equals f(x)
. No base function has this property:
length(data.frame(x))
equals 1
because the length of a data frame
is the number of columns.
nrow(data.frame(x))
does not equal nrow(x)
because nrow()
of a
vector is NULL
.
NROW(data.frame(x))
equals NROW(x)
for vector x
, so is almost what
we want. But because NROW()
is defined in terms of length()
, it returns
a value for every object, even types that can't go in a data frame, e.g.
data.frame(mean)
errors even though NROW(mean)
is 1
.
We define vec_size()
as follows:
Given vec_size()
, we can give a precise definition of a data frame: a data frame is a list of vectors where every vector has the same size. This has the desirable property of trivially supporting matrix and data frame columns.
vec_slice()
is to vec_size()
as [
is to length()
; i.e., it allows you to select observations regardless of the dimensionality of the underlying object. vec_slice(x, i)
is equivalent to:
x[i]
when x
is a vector.x[i, , drop = FALSE]
when x
is a data frame.x[i, , , drop = FALSE]
when x
is a 3d array.x <- sample(1:10) df <- data.frame(x = x) vec_slice(x, 5:6) vec_slice(df, 5:6)
vec_slice(data.frame(x), i)
equals data.frame(vec_slice(x, i))
(modulo variable and row names).
Prototypes are generated with vec_slice(x, 0L)
; given a prototype, you can initialize a vector of given size (filled with NA
s) with vec_init()
.
Closely related to the definition of size are the recycling rules. The recycling rules determine the size of the output when two vectors of different sizes are combined. In vctrs, the recycling rules are encoded in vec_size_common()
, which gives the common size of a set of vectors:
vec_size_common(1:3, 1:3, 1:3) vec_size_common(1:10, 1) vec_size_common(integer(), 1)
vctrs obeys a stricter set of recycling rules than base R. Vectors of size 1 are recycled to any other size. All other size combinations will generate an error. This strictness prevents common mistakes like dest == c("IAH", "HOU"))
, at the cost of occasionally requiring an explicit calls to rep()
.
knitr::include_graphics("../man/figures/sizes-recycling.png", dpi = 300)
You can apply the recycling rules in two ways:
If you have a vector and desired size, use vec_recycle()
:
r
vec_recycle(1:3, 3)
vec_recycle(1, 10)
If you have multiple vectors and you want to recycle them to the same
size, use vec_recycle_common()
:
r
vec_recycle_common(1:3, 1:3)
vec_recycle_common(1:10, 1)
The recycling rules in base R are described in The R Language Definition but are not implemented in a single function and thus are not applied consistently. Here, I give a brief overview of their most common realisation, as well as showing some of the exceptions.
Generally, in base R, when a pair of vectors is not the same length, the shorter vector is recycled to the same length as the longer:
rep(1, 6) + 1 rep(1, 6) + 1:2 rep(1, 6) + 1:3
If the length of the longer vector is not an integer multiple of the length of the shorter, you usually get a warning:
invisible(pmax(1:2, 1:3)) invisible(1:2 + 1:3) invisible(cbind(1:2, 1:3))
But some functions recycle silently:
length(atan2(1:3, 1:2)) length(paste(1:3, 1:2)) length(ifelse(1:3, 1:2, 1:2))
And data.frame()
throws an error:
data.frame(1:2, 1:3)
The R language definition states that "any arithmetic operation involving a zero-length vector has a zero-length result". But outside of arithmetic, this rule is not consistently followed:
# length-0 output 1:2 + integer() atan2(1:2, integer()) pmax(1:2, integer()) # dropped cbind(1:2, integer()) # recycled to length of first ifelse(rep(TRUE, 4), integer(), character()) # preserved-ish paste(1:2, integer()) # Errors data.frame(1:2, integer())
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.