NEWS.md

In ajstamm/gatpkg: Geographic Aggregation Tool (GAT)

gatpkg v2.1.0

• Removed dependency on spdep and fixed associated bugs.
• Added check for empty geographies.

gatpkg v2.0.1

• Added check for operating system in locateGATshapefile().
• Removed function aggregateGATnb().

gatpkg v2.0.0

• Revised writeGATkml() so that it also writes to KMZ.
• Removed dependencies on rgeos, lwgeom, rgdal, foreign, tcltk2, plotkml, and sp.
• Removed checkGATshapefilesize() and fixed bugs.
• Added advanced options to the settings file and log.
• Revised and standardized all pop-up fonts and colors except the pre-defined progress bar and file-selection window.
• Revised population weighting to read in the population file only once.
• Added a 'GATid' variable to clone the selected merge variable instead of overwriting it.

gatpkg v1.62.0

• Minor edits; last version before the overhaul.

gatpkg v1.61.2

• Patched to replace plotKML in writeGATkml with sf::st_write because plotKML was removed from CRAN.

gatpkg v1.61.1

• Added structure for pkgdown.
• Fixed typos and formatting issues in documentation.

gatpkg v1.61.0

• Added vignette "Assessing GAT Results".
• Fixed bugs and typos in confirmGATbystep and runGATprogram, notably the bug that incorrectly displayed number of excluded areas over maximum.
• Added objects "ismax1", "ismin2", and "ismax2" to the gatvars list object to track if minimum and maximum values were defined by the user and added this information to the log.
• Created a separate section in the technical notes to describe variables created by GAT.
• Moved citation and acknowledgements from set-up to a separate vignette.
• Restructured locateGATshapefile to add a modifiable status bar option.
• Added and revised several function examples.
• Added the following function options (and corresponding code in runGATprogram):
  • writeGATlog: added settingsfile option to allow incorrectly written logs to be regenerated from the settings.Rdata file produced by GAT
  • defineGATmerge: added progressbar option to suppress the progress bar if desired
  • plotGATmaps and plotGATcompare: added closemap option to automatically close map windows if desired
• Dropped compatibility for R-3.4.0.

gatpkg v1.60.3

• Added vignette "Preparing your shapefile for GAT".

gatpkg v1.60.2

• Completed bug fixes in defineGATmerge.
• Added function aggregateGATnb (modified from spdep::aggregate.nb), which is used in defineGATmerge.

gatpkg v1.60.1

• Addressed bug fixes in defineGATmerge.
• Added XML and network saving issues to the troubleshooting document.

gatpkg v1.60.0

All changes from January 2019 onward by Abigail Stamm.

Below is a summary of differences between the R script for GAT released in 2015 and the first beta release of the R package for GAT in 2020.

Coding changes

• Reordered GAT steps by section: user input, aggregation, mapping, and file saving.
• Converted all instances of svdialogs to tcltk and where possible, upgraded tcltk code to tcltk2.
• Rewrote KML code to use plotKML(), which sped it up considerably.
• Rewrote and expanded quit code to request quit confirmation and not crash GAT.
• Standardized GAT-created variable names.
• Made GAT ID length dynamic and consistent.
• Expanded error messaging and improved its precision.
• Added dialogs to handle incorrectly entered data on the fly.

Resource changes

• Created over 30 functions with accompanying help files and examples.
• Developed several vignettes, including a tutorial, and expanded the technical notes and troubleshooting documents.
• Replaced statewide and Albany shapefiles with two smaller shapefiles, hftown and hfblock, and updated examples to use only these files.
• Removed simulated birth data and references to it.
• Added citation, license, and funding information.
• Added a function to combine results after running a shapefile through GAT, then running its result through GAT.

User input changes

• Reordered and restructured user input dialogs.
• Added help button and instructions to user input dialogs.
• Added function options to user input dialogs to allow the following:
  • maximum values for up to 2 aggregation variables
  • optional enforced boundaries for 1 boundary variable
  • optional enforced adjacent areas
  • population weighting using 2 methods
  • up to 3 exclusion criteria (numeric only)
  • option not to write KML file
  • saving and rerunning prior settings
  • confirmation dialog that allows user to return to previous steps

Output changes

• Added aggregation and summary information to maps.
• Added map layers for excluded and problematic areas.
• Saved all maps to a PDF file.
• Added all settings, aggregation warnings, and GAT-created variables and files to the log.
• Added a list of saved files to the console.
• Saved GAT settings in an Rdata object to be reread into GAT.
• Made saving to KML optional.

gatpkg v1.34

All changes prior to 2019 by Gwen Babcock.

Changes prior to 2019 are listed below as they were entered in the program comments, with minor formatting changes. Most do not appear to correspond directly to specific versions. Comments appear to cover a mix of actual and planned changes.

• Jan 11, 2009 modified to add kml output
  • want to add capability to use two variables, and to merge from the highest down instead of lowest up
  • modify to use rgdal to read & write shapefile. It allows for projection info, but does have other limitations
  • Note: need to explicitly specify any libraries needed to run as a batch file, even those that would ordinarily be loaded by default
  • have problem with svDialog list. We hypothesize that it can bomb if the list contains less than 3 items so modify the program accordingly
• April 20, 2009 modify to put compactness ratio measure in output data
• beta v5 June 21, 2010 change dialogs to add 'back' and 'help' options
• beta v6 July 15, 2010 add option to calculate rate, added popup when aggregation occurs to warn of slowness
  • added column with number of areas per region
  • add comparison of file size with memory availability
• beta v6.1 December 7, 2010 add conditional code to run gpclibPermit() function if needed
• December 10, 2010 change name to production version 1.0
• Dec 14, 2010 add merging option to most similar neighbor
• May 2011 v 1.2 bug fixes: check for errors in rate calculations and remove extra linking variable before re-exporting input shapfile
• October 27, 2011 found bug: will not export shapefile if field names are more than 10 characters
  • fix this by adding substring function to reduce variable name length if needed
• Sept 27,2012 modify to not standardize compactness ratios
• Feb 13, 2013 include version number and date in message, so it will be included in the log
• Aug 15, 2013 modify to work in R 3.0.1
  • That looks like it will take a lot of work
  • some packages I used before are no longer available, such as gpclib
  • svDialogs has changed - new function names
  • add progress dialog
  • also make KML output always, reprojecting if needed
  • need to wait for listboxes to be visible before populating them
• October 31, 2013 add code to make similarity based on a ratio, not a count
• November 5, 2013 change logic to merge in same specified boundary whenever possible, even if not contiguous
• November 7, 2013 test rates and similarity ratios for zero denominators. Don't allow them for similarity, but plot the rates while ignoring bad values
• November 8, 2013 change rate plot to show integers only, and use jenks (natural breaks) because quintiles was not working
• Feb 5, 2014 fix bugs in transformations - wrong formula to calculate UTM zones; rename version to v1.31
• June 13, 2014 add filter to open dialog to limit view to shapefiles.
• April 10, 2015 fix problem: limit dialog messages to 255 characters
• August 28, 2015 fix typo mergoption->mergeoption

• November 20, 2015 fix typo indentified->identified

• Package notes as of GAT v1.34:

  1. attached base packages:
     • tcltk
     • stats
     • graphics
     • grDevices
     • utils
     • datasets
     • methods
     • base
  2. other attached packages:
     • Matrix_1.0-12
     • lattice_0.20-15
     • rgdal_0.8-10
     • foreign_0.8-53
     • svDialogs_0.9-54
     • svGUI_0.9-54
     • classInt_0.1-20
     • e1071_1.6-1
     • class_7.3-8
     • RColorBrewer_1.0-5
     • maptools_0.8-26
     • rgeos_0.2-19
     • sp_1.0-11
  3. loaded via a namespace (and not attached):
     • boot_1.3-9
     • coda_0.16-1
     • deldir_0.0-22
     • grid_3.0.1
     • LearnBayes_2.12
     • MASS_7.3-26
     • nlme_3.1-109
     • spdep_0.5-62
     • splines_3.0.1

ajstamm/gatpkg documentation built on Nov. 23, 2023, 9:44 a.m.