shell92pf: Shell92. Failure pressure of the corroded pipe

In omega1x/pipenostics: Diagnostics, Reliability and Predictive Maintenance of Pipeline Systems

Shell92. Failure pressure of the corroded pipe

Description

Calculate failure pressure of the corroded pipe according to Shell92 code.

This code should be applied only to

• single cross section of the pipeline containing a longitudinally oriented, flat bottom surface defect of corrosion/erosion type;

• defects which depth is less than 85 % of pipe wall thickness.

The estimation is valid for single isolated metal loss defects of the corrosion/erosion type and when only internal pressure loading is considered.

As in the case of dnvpf, the defect is approximated by a rectangular form.

Usage

shell92pf(d, wth, uts, depth, l)

Arguments

d	nominal outside diameter of pipe, [mm]. Type: assert_double.
wth	nominal wall thickness of pipe, [mm]. Type: assert_double.
uts	ultimate tensile strength (UTS) or specified minimum tensile strength (SMTS) as a characteristic of steel strength, [MPa]. Type: assert_double.
depth	measured maximum depth of the corroded area, [mm]. Type: assert_double.
l	measured maximum longitudinal length of corroded area, [mm]. Type: assert_double.

Details

Numeric NAs may appear in case prescribed conditions of use are offended.

Value

Estimated failure pressure of the corroded pipe, [MPa]. Type: assert_double.

References

Timashev and A. Bushinskaya, Diagnostics and Reliability of Pipeline Systems, Topics in Safety, Risk, Reliability and Quality 30, DOI 10.1007/978-3-319-25307-7

See Also

Other fail pressure functions: b31gpf, b31gmodpf, dnvpf, pcorrcpf

Examples

 library(pipenostics)

d     = c(812.8, 219.0)  # [mm]
wth   = c( 19.1,  14.5)  # [mm]
uts  = c(530.9, 455.1)   # [N/mm^2]
l     = c(203.2, 200.0)  # [mm]
depth = c( 13.4,   9.0)  # [mm]

shell92pf(d, wth, uts, depth, l)
# [1] 11.09262 25.27286

omega1x/pipenostics documentation built on May 13, 2024, 4:14 a.m.