tests/testthat/_snaps/checkDesign.md
In sachseka/eatPrep: Prepare Data for IRT Analyses
returns nothing with no problems or only success messages on verbose mode [plain]
Code
checkDesignTest(verbose = FALSE)
Message
-- Check: Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [ansi]
Code
checkDesignTest(verbose = FALSE)
Message
-- [1m[1mCheck:[1m[22m Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [unicode]
Code
checkDesignTest(verbose = FALSE)
Message
── Check: Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [fancy]
Code
checkDesignTest(verbose = FALSE)
Message
── [1m[1mCheck:[1m[22m Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
identifies ID variables that cannot be found in the dataset [plain]
Code
checkDesignTest(id = "FalseID")
Condition
Error in `checkDesign()`:
! ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [ansi]
Code
checkDesignTest(id = "FalseID")
Condition
[1m[33mError[39m in `checkDesign()`:[22m
[1m[22m[33m![39m ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [unicode]
Code
checkDesignTest(id = "FalseID")
Condition
Error in `checkDesign()`:
! ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [fancy]
Code
checkDesignTest(id = "FalseID")
Condition
[1m[33mError[39m in `checkDesign()`:[22m
[1m[22m[33m![39m ID variable `FalseID` not found in dataset.
throws danger messages when block names in blocks do not equal those in booklets [plain]
Code
checkDesignTest(blocks = test_block_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in blocks but not in booklets: `bl9`
-- Check: Subunit recoding
i Use names for recoded subunits.
! Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in booklets but not in blocks: `bl1`
> No check for valid and missing codes will be available.
> The following 1 block is in blocks but not in booklets: `bl9`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
x Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in booklets but not in rotation: `booklet4`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in booklets but not in blocks: `bl8`
> No check for valid and missing codes will be available.
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
x Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [ansi]
Code
checkDesignTest(blocks = test_block_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
[33m![39m Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl1`
> No check for valid and missing codes will be available.
> The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[31mx[39m Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet4`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl8`
> No check for valid and missing codes will be available.
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[31mx[39m Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [unicode]
Code
checkDesignTest(blocks = test_block_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in blocks but not in booklets: `bl9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
! Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in booklets but not in blocks: `bl1`
→ No check for valid and missing codes will be available.
→ The following 1 block is in blocks but not in booklets: `bl9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✖ Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in booklets but not in rotation: `booklet4`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in booklets but not in blocks: `bl8`
→ No check for valid and missing codes will be available.
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✖ Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [fancy]
Code
checkDesignTest(blocks = test_block_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
[33m![39m Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl1`
→ No check for valid and missing codes will be available.
→ The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[31m✖[39m Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet4`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl8`
→ No check for valid and missing codes will be available.
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[31m✖[39m Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when booklet names in booklets do not equal those in rotation [plain]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in rotation but not in booklets: `booklet1`
> The following 1 booklet is in booklets but not in rotation: `booklet9`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in rotation but not in booklets: `booklet8`
> The following 1 booklet is in booklets but not in rotation: `booklet1`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [ansi]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet1`
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet8`
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet1`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [unicode]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in rotation but not in booklets: `booklet1`
→ The following 1 booklet is in booklets but not in rotation: `booklet9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in rotation but not in booklets: `booklet8`
→ The following 1 booklet is in booklets but not in rotation: `booklet1`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [fancy]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet1`
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet8`
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet1`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [plain]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 2 variables are not in info (`subunit` in blocks) but in
dataset. They will be ignored during check: `testA` and `testB`
-- Check: Valid and missing codes
v No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [ansi]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 2 variables are not in info (`subunit` in [32mblocks[39m) but in
dataset. They will be ignored during check: `testA` and `testB`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [unicode]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 2 variables are not in info (`subunit` in blocks) but in
dataset. They will be ignored during check: `testA` and `testB`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [fancy]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 2 variables are not in info (`subunit` in [32mblocks[39m) but in
dataset. They will be ignored during check: `testA` and `testB`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [plain]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in Info
i The following 1 variable is not in dataset but in info (`subunit` in blocks).
It will be ignored during check: `I05R`
-- Check: Valid and missing codes
v No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [ansi]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in Info
[36mi[39m The following 1 variable is not in dataset but in info (`subunit` in [32mblocks[39m).
It will be ignored during check: `I05R`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [unicode]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in Info
ℹ The following 1 variable is not in dataset but in info (`subunit` in blocks).
It will be ignored during check: `I05R`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [fancy]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in Info
[36mℹ[39m The following 1 variable is not in dataset but in info (`subunit` in [32mblocks[39m).
It will be ignored during check: `I05R`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
identifies incorrect sysMis codes and allows for user-defined sysMis [plain]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
i I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
i I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [ansi]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mi[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mi[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [unicode]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
ℹ I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
ℹ I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [fancy]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mℹ[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mℹ[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect vc codes [plain]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
i I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
i I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [ansi]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mi[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mi[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [unicode]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
ℹ I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
ℹ I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [fancy]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mℹ[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mℹ[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
sachseka/eatPrep documentation built on June 9, 2025, 9:36 a.m.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
returns nothing with no problems or only success messages on verbose mode [plain]
Code
checkDesignTest(verbose = FALSE)
Message
-- Check: Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [ansi]
Code
checkDesignTest(verbose = FALSE)
Message
-- [1m[1mCheck:[1m[22m Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [unicode]
Code
checkDesignTest(verbose = FALSE)
Message
── Check: Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
returns nothing with no problems or only success messages on verbose mode [fancy]
Code
checkDesignTest(verbose = FALSE)
Message
── [1m[1mCheck:[1m[22m Valid and missing codes
Code
checkDesignTest(verbose = TRUE)
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
identifies ID variables that cannot be found in the dataset [plain]
Code
checkDesignTest(id = "FalseID")
Condition
Error in `checkDesign()`:
! ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [ansi]
Code
checkDesignTest(id = "FalseID")
Condition
[1m[33mError[39m in `checkDesign()`:[22m
[1m[22m[33m![39m ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [unicode]
Code
checkDesignTest(id = "FalseID")
Condition
Error in `checkDesign()`:
! ID variable `FalseID` not found in dataset.
identifies ID variables that cannot be found in the dataset [fancy]
Code
checkDesignTest(id = "FalseID")
Condition
[1m[33mError[39m in `checkDesign()`:[22m
[1m[22m[33m![39m ID variable `FalseID` not found in dataset.
throws danger messages when block names in blocks do not equal those in booklets [plain]
Code
checkDesignTest(blocks = test_block_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in blocks but not in booklets: `bl9`
-- Check: Subunit recoding
i Use names for recoded subunits.
! Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in booklets but not in blocks: `bl1`
> No check for valid and missing codes will be available.
> The following 1 block is in blocks but not in booklets: `bl9`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
x Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in booklets but not in rotation: `booklet4`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- Check: Block names
x Block names set in blocks does not equal block names set in booklets. Please
check.
> The following 1 block is in booklets but not in blocks: `bl8`
> No check for valid and missing codes will be available.
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
x Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [ansi]
Code
checkDesignTest(blocks = test_block_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
[33m![39m Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl1`
> No check for valid and missing codes will be available.
> The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[31mx[39m Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet4`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
-- [1m[1mCheck:[1m[22m Block names
[31mx[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
> The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl8`
> No check for valid and missing codes will be available.
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[31mx[39m Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [unicode]
Code
checkDesignTest(blocks = test_block_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in blocks but not in booklets: `bl9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
! Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in booklets but not in blocks: `bl1`
→ No check for valid and missing codes will be available.
→ The following 1 block is in blocks but not in booklets: `bl9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✖ Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in booklets but not in rotation: `booklet4`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── Check: Block names
✖ Block names set in blocks does not equal block names set in booklets. Please
check.
→ The following 1 block is in booklets but not in blocks: `bl8`
→ No check for valid and missing codes will be available.
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✖ Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when block names in blocks do not equal those in booklets [fancy]
Code
checkDesignTest(blocks = test_block_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
[33m![39m Found no names to recode 1 subunit: `I99` This subunit will be ignored in
determining 'mnr'.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(blocks = test_block_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl1`
→ No check for valid and missing codes will be available.
→ The following 1 block is in [32mblocks[39m but not in [32mbooklets[39m: `bl9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[31m✖[39m Not available as there is 1 block in booklets that is not in blocks!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet4`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(booklets = test_booklet_block)
Message
── [1m[1mCheck:[1m[22m Block names
[31m✖[39m Block names set in [32mblocks[39m does not equal block names set in [32mbooklets[39m. Please
check.
→ The following 1 block is in [32mbooklets[39m but not in [32mblocks[39m: `bl8`
→ No check for valid and missing codes will be available.
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[31m✖[39m Not available as there is 1 block in booklets that is not in blocks!
throws danger messages when booklet names in booklets do not equal those in rotation [plain]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in rotation but not in booklets: `booklet1`
> The following 1 booklet is in booklets but not in rotation: `booklet9`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
-- Check: Booklet names
x Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
> The following 1 booklet is in rotation but not in booklets: `booklet8`
> The following 1 booklet is in booklets but not in rotation: `booklet1`
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
v No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [ansi]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet1`
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet9`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
-- [1m[1mCheck:[1m[22m Booklet names
[31mx[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
> The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet8`
> The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet1`
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [unicode]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in rotation but not in booklets: `booklet1`
→ The following 1 booklet is in booklets but not in rotation: `booklet9`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
── Check: Booklet names
✖ Booklet names set in rotation does not equal booklet names set in booklets.
Please check.
→ The following 1 booklet is in rotation but not in booklets: `booklet8`
→ The following 1 booklet is in booklets but not in rotation: `booklet1`
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws danger messages when booklet names in booklets do not equal those in rotation [fancy]
Code
checkDesignTest(booklets = test_booklet_booklet)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet1`
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet9`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(rotation = test_rotation_booklet)
Message
── [1m[1mCheck:[1m[22m Booklet names
[31m✖[39m Booklet names set in [32mrotation[39m does not equal booklet names set in [32mbooklets[39m.
Please check.
→ The following 1 booklet is in [32mrotation[39m but not in [32mbooklets[39m: `booklet8`
→ The following 1 booklet is in [32mbooklets[39m but not in [32mrotation[39m: `booklet1`
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [plain]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 2 variables are not in info (`subunit` in blocks) but in
dataset. They will be ignored during check: `testA` and `testB`
-- Check: Valid and missing codes
v No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [ansi]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 2 variables are not in info (`subunit` in [32mblocks[39m) but in
dataset. They will be ignored during check: `testA` and `testB`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [unicode]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 2 variables are not in info (`subunit` in blocks) but in
dataset. They will be ignored during check: `testA` and `testB`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws warning when more variables in dataset available than in blocks$subunit [fancy]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(dat = within(prepDat, {
hisei <- NULL
testB <- 2
testA <- 1
}))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 2 variables are not in info (`subunit` in [32mblocks[39m) but in
dataset. They will be ignored during check: `testA` and `testB`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [plain]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Valid and missing codes
v No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in Info
i The following 1 variable is not in dataset but in info (`subunit` in blocks).
It will be ignored during check: `I05R`
-- Check: Valid and missing codes
v No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [ansi]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in Info
[36mi[39m The following 1 variable is not in dataset but in info (`subunit` in [32mblocks[39m).
It will be ignored during check: `I05R`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[32mv[39m No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [unicode]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Valid and missing codes
✔ No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in Info
ℹ The following 1 variable is not in dataset but in info (`subunit` in blocks).
It will be ignored during check: `I05R`
── Check: Valid and missing codes
✔ No deviations from design detected!
throws warning when more variables in blocks$subunit than in dataset [fancy]
Code
checkDesignTest(dat = within(prepDat, hisei <- NULL))
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
Code
checkDesignTest(dat = prepDat[, -c(2, 7)])
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in Info
[36mℹ[39m The following 1 variable is not in dataset but in info (`subunit` in [32mblocks[39m).
It will be ignored during check: `I05R`
── [1m[1mCheck:[1m[22m Valid and missing codes
[32m✔[39m No deviations from design detected!
identifies incorrect sysMis codes and allows for user-defined sysMis [plain]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
i I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
i I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [ansi]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mi[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mi[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [unicode]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
ℹ I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
ℹ I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect sysMis codes and allows for user-defined sysMis [fancy]
Code
checkDesignTest(dat = within(prepDat, I01R <- ifelse(I01R == "mbi", "mbd", I01R)),
sysMis = "mbd")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mℹ[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
Code
checkDesignTest(dat = within(userDefinedSysMis, I01R <- ifelse(I01R == "mbi",
NA, I01R)), sysMis = "NA")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit sysMis instead of valid codes for booklet `booklet1`:
I01R
[36mℹ[39m I01R (6 cases): person101, person111, person112, person113, person144, person155
identifies incorrect vc codes [plain]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
i I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
-- Check: Subunit recoding
i Use names for recoded subunits.
-- Check: Variables in the dataset
i The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
-- Check: Valid and missing codes
i Deviations from design detected!
x Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
i I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [ansi]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mi[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
-- [1m[1mCheck:[1m[22m Subunit recoding
[36mi[39m Use names for recoded subunits.
-- [1m[1mCheck:[1m[22m Variables in the dataset
[36mi[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
-- [1m[1mCheck:[1m[22m Valid and missing codes
[36mi[39m Deviations from design detected!
[31mx[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mi[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [unicode]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
ℹ I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
── Check: Subunit recoding
ℹ Use names for recoded subunits.
── Check: Variables in the dataset
ℹ The following 1 variable is not in info (`subunit` in blocks) but in dataset.
It will be ignored during check: `hisei`
── Check: Valid and missing codes
ℹ Deviations from design detected!
✖ Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
ℹ I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
identifies incorrect vc codes [fancy]
Code
checkDesignTest(dat = within(prepDat, I22R <- ifelse(I22R == "mbd", "mbi", I22R)),
sysMis = "mbd")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mℹ[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
Code
checkDesignTest(dat = within(userDefinedSysMis, I22R <- ifelse(is.na(I22R),
"mbi", I22R)), sysMis = "NA")
Message
── [1m[1mCheck:[1m[22m Subunit recoding
[36mℹ[39m Use names for recoded subunits.
── [1m[1mCheck:[1m[22m Variables in the dataset
[36mℹ[39m The following 1 variable is not in info (`subunit` in [32mblocks[39m) but in dataset.
It will be ignored during check: `hisei`
── [1m[1mCheck:[1m[22m Valid and missing codes
[36mℹ[39m Deviations from design detected!
[31m✖[39m Found for 1 subunit valid codes instead of sysMis for booklet `booklet1`:
I22R
[36mℹ[39m I22R (100 cases): person100, person101, person102, person103, person104, person105, person106, person107, person108, person109, person110, person111, person112, person113, person114, person115, person116, person117, person118, person119, person120, person121, person122, person123, person124, person125, person126, person127, person128, person129, person130, person131, person132, person133, person134, person135, person136, person137, person138, person139, person140, person141, person142, person143, person144, person145, person146, person147, person148, person149, person150, person151, person152, person153, person154, person155, person156, person157, person158, person159, person160, person161, person162, person163, person164, person165, person166, person167, person168, person169, person170, person171, person172, person173, person174, person175, person176, person177, person178, person179, person180, person181, person182, person183, person184, person185, person186, person187, person188, person189, person190, person191, person192, person193, person194, person195, person196, person197, person198, person199
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
Embedding an R snippet on your website
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.