In uds-helms/BEclear: Correction of batch effects in DNA methylation data

knitr::opts_chunk$set(collapse = TRUE, comment = "#>")
library(pander)
panderOptions('knitr.auto.asis', TRUE)
panderOptions('plain.ascii', TRUE)

Introduction

We guide you through the individual steps of the r BiocStyle::Biocpkg("BEclear") package in their own chapters. They will follow in the logical order of an example of correcting some batch affected DNA methylation data. This article should only give a small tutorial, more details about the individual methods can always be found in the help sections of the r BiocStyle::Biocpkg("BEclear") package, e.g. through typing calcBatchEffects in the R environment with the package loaded. To work with the methods contained in the BEclear package, a matrix or data.frame with genes as row-names and samples as column names as well as a samples data.frame with the first column named "sample_id" and the second column named "batch_id" is needed as input.

Installation

r BiocStyle::Biocpkg("BEclear") is available on Bioconductor. To install it you can therefore use the r BiocStyle::Biocpkg("BiocManager"):

if (!requireNamespace("BiocManager", quietly = TRUE)) {
  install.packages("BiocManager")
}
BiocManager::install("BEclear")

Otherwise you can also install r BiocStyle::Githubpkg("uds-helms/BEclear") from its Github repository by the following command:

if (!requireNamespace("devtools", quietly = TRUE)) {
  install.packages("devtools")
}
devtools::install_github("uds-helms/BEclear")

We however recommend installing it through Bioconductor, as this takes care of installing the dependencies and furthermore you can refer to the release of Bioconductor, when using our package, which enables you to reproduce the exact conditions of your run.

During the compilation of the code, many parts of the software will be automatically tested for correct execution and reproduction of expected results. This is implemented in form of unit tests with the help of the r BiocStyle::CRANpkg("testthat") package.

When done with the installation you can simply load the package by typing:

library(BEclear)

Data

The beta values stored in the ex.data matrix were obtained from level 3 BRCA data from the TCGA portal [@TCGA]. Generally, beta values are calculated by dividing the methylated signal by the sum of the unmethylated and methylated signals from a DNA methylation microrarray. In the level 3 TCGA data, this calculation has already been done. The sample data used here contains averaged beta values of probes that belong to promoter regions of single genes. Another possibility would be to use beta values of single probes, whereby the probe names should then be used instead of the gene names as rownames of the matrix.

You can load our sample data via the following command:

data("BEclearData")

It contains one matrix with the beta values:

knitr::kable(ex.data[1:10,1:5], caption = 'Some entries from the example data-set')

And one data.frame containing the assignment of samples to batches:

knitr::kable(ex.samples[1:10,], caption = 'Some entries from the example sample annotation')

Detection of batch effects

For the detection of batch effects we calculate the median difference between the beta values of a gene in a batch and the values of this gene in all other batches. Furthermore we use a non-parametric Kolmogorov-Smirnov test (ks.test) to compare the distribution of the beta value for this gene in the batch and the other batches.

If one gene in a batch has a p-value determined by the ks.test of less or equal 0.01 and a median difference of greater or equal 0.05 it is considered batch effected.

Detection

For the calculation of the batch effects you just use the calcBatchEffects function. It calculates both median difference and p-value. By default we correct the p-values by the false discovery rate developed by @BH, but you can use all adjustment methods covered by p.adjust.methods.

batchEffect <- calcBatchEffects(
  data = ex.data, samples = ex.samples,
  adjusted = TRUE, method = "fdr"
)
mdifs <- batchEffect$med
pvals <- batchEffect$pval

Summary

To see which genes in which batches are effected you use the calcSummary function as follows:

summary <- calcSummary(medians = mdifs, pvalues = pvals)
knitr::kable(head(summary), caption = 'Summary over the batch affected gene-sample combination of the example data set')

Scoring

Furthermore you can calculate a batch score for a whole batch to determine the severity how it is affected.

score <- calcScore(ex.data, ex.samples, summary, dir = getwd())
knitr::kable(score, caption = 'Batch scores of the example data-set')

Imputation of missing values

For the imputation of missing values we use a slightly modified version of the stochastic gradient descent method described by @Koren2009. In this section we will describe our implementation of this method and how to use it.

We assume that our complete data matrix (D_{ij}) can be described by the effects of a matrix (L_i), which represents the effect of the features (genes in our case) and a matrix (R_j) describing the effect of the samples in the following way:

\begin{equation} D_{ij} = L_{i}^{T} \times R_{j} . (#eq:assumption) \end{equation}

The method can either be run on the complete data set or the data set can be divided into blocks on which the method is applied. This division into blocks allows for parallelisation of the method, which can be useful to speed up the process. We have found that a block-size of 60x60 works well[@Akulenko2016].

The error for each block is calculated in the following way:

\begin{equation} errorMatrix_{ij} = Block_{ij} - L_{i}^{T} \times R_{j} . (#eq:errormatrix) \end{equation}

We try to minimize the following loss function through a gradient descent:

\begin{equation} min_{L, R} \sum_{ij \in K}(errorMatrix_{ij}^2) + \lambda \times (\left\lVert L_{i}\right\rVert_{F}^{2} + \left\lVert R_{j}\right\rVert_{F}^{2} ). (#eq:loss) \end{equation} Where (K) is the set of tuples ((i,j)) for which the value is present. (\lambda) is the penalty coefficient, which controls how restrictive the selection of variables should be. The default of (\lambda) is 1.

Another coefficient (\gamma) controls the size of the step by which the two matrices (L_i) and (R_j) are modified. It is initialized by default with 0.01 and its value changes during the iterations (epochs).

For the first iteration the matrices (L_i) and (R_j) are filled with random values generated by the rnorm function from the r BiocStyle::Rpackage("stats") package and the initial loss and error matrix are calculated.

Then for each iteration the following is done:

• (L_i) and (R_j) are modified proportional by (\gamma) through the following calculation:

  • \begin{equation} L_i = L_i + 2 \times \gamma \times (errorMatrix_{ij} \times R_j - \lambda \times L_i). (#eq:Lmod) \end{equation}

  • \begin{equation} R_j = R_j + 2 \times \gamma \times (errorMatrix_{ij} \times L_i - \lambda \times R_j). (#eq:Rmod) \end{equation}

• Then the new error matrix and loss are calculated.

• If the old loss is smaller than the new one:
  • (\gamma = \gamma \div 2.)
• Else:
  • (\gamma = \gamma \times 1.05.)

The (L_i) and (R_j) matrices at the end of the last iteration are then used to impute the missing data. The default number of iterations is 50.

Usage

First you have to set the found batch effect values to NAs. You can do this by using the clearBEgenes function:

cleared.data <- clearBEgenes(ex.data, ex.samples, summary)

In case you're using r BiocStyle::Biocpkg("BEclear") not for correcting batch effects, but just for the data imputation, you would have to set the values you want to impute to NA, if they not already are.

For the data imputation you use the imputeMissingData function:

library(ids)
corrected.data <- imputeMissingData(cleared.data,
  rowBlockSize = 60,
  colBlockSize = 60, epochs = 50,
  outputFormat = "", dir = getwd()
)

If you set rowBlockSize and colBlockSize to 0 the matrix will not be divided into block and the gradient descent will be applied to the matrix as a whole.

Replacing values outside the boundaries

Note that sometimes during the prediction, it can happen that values beyond the boundaries of beta values are returned, that means values smaller than zero or greater than one. findWrongValues simply returns a list of these values, together with the position in the output matrix, replaceOutsideValues corrects these by simply setting the wrong values to zero or one, respectively. Note that these methods are especially designed for the prediction of beta values from DNA methylation data, which only take on values between 0 and 1.

corrected.data.valid<-replaceOutsideValues(corrected.data)

In this case there were no values to be replaced.

Overall correction

Besides the individual methods BEclear also offers an overall method, which executes all the described previous steps in one call. It also applies some preprocessing to your data set if necessary.

result <- correctBatchEffect(data = ex.data, samples = ex.samples)

Returned is a list containing all results from the executed functions.

Parallelization

For parallelization we use the r BiocStyle::Biocpkg("BiocParellel") package. However by default all methods are executed in serial mode. The methods CalcBatchEffect, imputeMissingData and correctBatchEffect support parallelization through there parameter BPPARAM, which takes a BiocParallel::BiocParallelParam class as an argument.

Type the following to get an overview over the supported evaluation environments:

?BiocParallel::BiocParallelParam

Plotting

Additionally r BiocStyle::Biocpkg("BEclear") also includes a method for plotting the batch effects. Let us now use the makeBoxplot to compare the distributions of the values in the different samples before and after the batch effect correction:

makeBoxplot(ex.data, ex.samples, score,
  bySamples = TRUE,
  col = "standard", main = "Example data", xlab = "Batch",
  ylab = "Beta value", scoreCol = TRUE)

makeBoxplot(corrected.data, ex.samples, score,
  bySamples = TRUE,
  col = "standard", main = "Corrected example data",
  xlab = "Batch", ylab = "Beta value", scoreCol = FALSE)

Session info {.unnumbered}

Here is the output of sessionInfo() on the system on which this document was compiled running pandoc r rmarkdown::pandoc_version():

pander(sessionInfo(), compact=TRUE)

References {.unnumbered}

uds-helms/BEclear documentation built on April 16, 2023, 12:44 a.m.