pvt_oil: Create a matrix of PVT properties for black oil samples

In Rpvt: Estimate the PVT Properties of Reservoir Fluids

Description

The pvt_oil() generates a table of oil and gas PVT properties at reservoir temperature and pressures from the atmospheric condition up to the initial reservoir pressure. The estimated oil properties are solution gas-oil ratio, formation volume factor, density, compressibility, and viscosity. Estimated PVT properties for the associated gas are compressibility factor, formation volume factor, density, compressibility, viscosity, and pseudo-pressure.

Usage

pvt_oil(
  input_unit = "SI",
  output_unit = "SI",
  fluid = "black_oil",
  pvt_model = "Standing",
  visc_model = "Beggs_Robinson",
  t = 85.4,
  p = 35000,
  oil_api = 38,
  gas_spgr = 0.67,
  nhc_composition = c(0, 0, 0),
  rsi = NULL,
  pb = 29500,
  warning = "yes"
)

Arguments

input_unit	input unit system for parameters, a character string either 'SI' or 'Field'
output_unit	output unit system for properties, a character string either 'SI' or 'Field'
fluid	fluid type, the character string 'black_oil'
pvt_model	PVT model, a character string. 'Standing', 'Vasquez_Beggs', 'Farshad_Petrosky', 'Al_Marhoun', and 'Glaso' models are currently available
visc_model	viscosity model, a character string. 'Beggs_Robinson', and 'Al_Marhoun' models are currently available
t	temperature, a numeric value either in 'C' or 'F' depending on the 'input_unit'
p	pressure, a numeric value either in 'kPag' or 'Psig' depending on the 'input_unit'
oil_api	API gravity of oil
gas_spgr	gas specific gravity (Air = 1.0)
nhc_composition	a vector of mole fractions for nitrogen, hydrogen sulfide, and carbon dioxide, respectively
rsi	initial solution gas oil ratio in 'm3/m3' or 'SCF/STB' depending on the 'input_unit'. It is either NULL or a numeric value. If 'rsi' is NULL, then a numeric value must be assigned to 'pb'
pb	bubble point pressure, a numeric value either in 'kPag' or 'Psig' depending on the 'input_unit'. it is either NULL or a numeric value. If 'pb' is NULL, then a numeric value must be assigned to 'rsi'
warning	a charater string either 'yes' or 'no'

References

\insertRef

Standing1947Rpvt

\insertRef

Vasquez1980Rpvt

\insertRef

Glaso1980Rpvt

\insertRef

PetroskyJr.1998Rpvt

\insertRef

Al-Marhoun1988Rpvt

\insertRef

Beggs1975Rpvt

\insertRef

Al-Marhoun2004Rpvt

\insertRef

Spivey2007Rpvt

\insertRef

Sutton2007Rpvt

Examples

pvt_oil_results_1 <- pvt_oil(input_unit = "Field", output_unit = "Field", fluid = "black_oil",
pvt_model = "Standing", visc_model = "Beggs_Robinson",
t = 200, p = 3000, oil_api = 35, gas_spgr = 0.8,
nhc_composition = c(0.05,0.02,0.04), rsi = 650, pb = NULL, warning = "no")

head(pvt_oil_results_1)

pvt_oil_results_2 <- pvt_oil(input_unit = "SI", output_unit = "Field", fluid = "black_oil",
pvt_model = "Vasquez_Beggs", visc_model = "Al_Marhoun",
t = 80, p = 20000, oil_api = 34.4, gas_spgr = 0.65,
nhc_composition = c(0.0,0.0,0.0), rsi = NULL, pb = 11350, warning = "yes")

head(pvt_oil_results_2)

Rpvt documentation built on July 8, 2020, 7:34 p.m.