APAlyzer is a toolkit for bioinformatic analysis of alternative polyadenylation (APA) events using RNA sequencing data. Our main approach is comparison of sequencing reads in regions demarcated by high quality polyadenylation sites (PASs) annotated in the PolyA_DB database (http://exon.njms.rutgers.edu/polya_db/v3/). The current version (v3.0) uses RNA-seq data to examine APA events in 3’ untranslated regions (3’UTRs) and in introns. The coding regions are used for gene expression calculation.
This project is licensed under the LGPL-3 License.
APAlyzer should be installed using BiocManager:
```{r eval=FALSE} if (!"BiocManager" %in% rownames(installed.packages())) install.packages("BiocManager") BiocManager::install("APAlyzer")
Alternatively, it can also be installed as follows:
```{r eval=FALSE}
R CMD INSTALL APAlyzer.tar.gz
In additions, user can also install development version of APAlyzer directly from GitHub: ```{r eval=FALSE} BiocManager::install('RJWANGbioinfo/APAlyzer')
After installation, APAlyzer can be used by:
```{r eval=FALSE}
library(APAlyzer)
The package reads BAM file(s) to obtain read coverage information in different
genomic regions. The following example shows that we first specify paths to
example BAM files in the r BiocStyle::Biocpkg("TBX20BamSubset")
[@TBX20BamSubset] data package. In this example,
BAM files correspond to mouse RNA-seq data, (mapped to mm9).
```{r eval=TRUE} suppressMessages(library("TBX20BamSubset")) suppressMessages(library("Rsamtools")) flsall = getBamFileList() flsall
## Genomic reference
PAS references in the genome (both 3’UTRs and introns) are required by our
package. We have pre-built a reference file for the mouse genome (mm9),
which can be loaded from `extdata`:
```{r eval=TRUE}
library(repmis)
URL="https://github.com/RJWANGbioinfo/PAS_reference_RData/blob/master/"
file="mm9_REF.RData"
source_data(paste0(URL,file,"?raw=True"))
This extdata
covers 3’UTR APA regions (refUTRraw), IPA regions (dfIPA),
and 3’-most exon regions (dfLE). The refUTRraw
is a data frame containing
6 columns for genomic information of 3’UTR PASs:
```{r eval=TRUE}
head(refUTRraw,2)
`dfIPA` is a data frame containing 8 columns for Intronic PASs; ‘upstreamSS’
means the closest 5’ or 3’ splice site to IPA, ‘downstreamSS’
means closest 3’ splice site:
```{r eval=TRUE}
head(dfIPA,2)
dfLE
is a data frame containing 5 colmuns for 3’ least exon;
‘LEstart’ means the start genomic position of last 3’ exon.
```{r eval=TRUE}
head(dfLE,2)
In additions to mouse mm9, our package has also a pre-build version
for mouse mm10, human hg38 and human hg19 genome:
```{r eval=TRUE}
URL="https://github.com/RJWANGbioinfo/PAS_reference_RData/blob/master/"
file="hg19_REF.RData"
source_data(paste0(URL,file,"?raw=True"))
More pre-build refercence can be found at the reference and testing data repo: https://github.com/RJWANGbioinfo/PAS_reference_RData_and_testing_data
To quantify the relative expression of PAS, we will need to build the reference
regions for them, although this can be build separately in previous version. We
also provide a new fouction REF4PAS
starting from APAlyzer 1.2.1 to build
these regions at once:
```{r eval=TRUE}
refUTRraw=refUTRraw[which(refUTRraw$Chrom=='chr19'),]
dfIPAraw=dfIPA[which(dfIPA$Chrom=='chr19'),]
dfLEraw=dfLE[which(dfLE$Chrom=='chr19'),]
PASREF=REF4PAS(refUTRraw,dfIPAraw,dfLEraw)
UTRdbraw=PASREF$UTRdbraw
dfIPA=PASREF$dfIPA
dfLE=PASREF$dfLE
In this case, `UTRdbraw` is the reference region used for 3'UTR APA analysis,
while `dfIPA` and `dfLE` are needed in the intronic APA analysis.
## Building 3'UTR PAS and IPA reference using GTF files
Although we highly suggest user use references regions genrated from PolyA_DB.
Start from APAlyzer 1.2.1, we also provide a new fouction that can help users to build
their reference directly from gene annotation GTF files, we hope this can help
the species which are not covered by the PolyA_DB yet:
```{r eval=FALSE}
## build Reference ranges for 3'UTR PASs in mouse
download.file(url='ftp://ftp.ensembl.org/pub/release-99/gtf/mus_musculus/Mus_musculus.GRCm38.99.gtf.gz',
destfile='Mus_musculus.GRCm38.99.gtf.gz')
GTFfile="Mus_musculus.GRCm38.99.gtf.gz"
PASREFraw=PAS2GEF(GTFfile)
refUTRraw=PASREFraw$refUTRraw
dfIPAraw=PASREFraw$dfIPA
dfLEraw=PASREFraw$dfLE
PASREF=REF4PAS(refUTRraw,dfIPAraw,dfLEraw)
To calculate 3’UTR APA relative expression (RE), we first need to define
the refence regions of aUTR and cUTR using refUTRraw
. Since the sample
data only contains mapping information on chr19, we can zoom into
reference regions on chr19 only:
```{r eval=FALSE}
refUTRraw=refUTRraw[which(refUTRraw$Chrom=='chr19'),]
UTRdbraw=REF3UTR(refUTRraw)
The `REF3UTR` function returns a genomic range containing aUTR(pPAS to dPAS)
and cUTR(cdsend to pPAS) regions for each gene:
```{r}
head(UTRdbraw,2)
Once cUTR and aUTR regions are defined, the RE of 3’UTR APA of each gene
can be calculated by PASEXP_3UTR
:
```{r eval=TRUE} DFUTRraw=PASEXP_3UTR(UTRdbraw, flsall, Strandtype="forward")
The `PASEXP_3UTR` 3UTR requires two inputs: 1) aUTR and cUTR
reference regions, and 2) path of BAM file(s). In additions
to input, one can also define the strand of the
sequencing using `Strandtype`. The detailed usage can also
be obtained by the command `?PASEXP_3UTR`.The output data
frame covers reads count (in aUTR or cUTR), RPKM (in
aUTR or cUTR) and RE (log2(aUTR/cUTR)) for each gene:
```{r eval=TRUE}
head(DFUTRraw,2)
Analysis of IPA requires two genomic regions: IPA regions and 3’-most exons. As mentioned above, these regions in mouse and human genomes have been pre-built in the package:
```{r eval=TRUE}
URL="https://github.com/RJWANGbioinfo/PAS_reference_RData/blob/master/" file="mm9_REF.RData" source_data(paste0(URL,file,"?raw=True"))
```{r eval=TRUE}
#human(hg19):
URL="https://github.com/RJWANGbioinfo/PAS_reference_RData/blob/master/"
file="hg19_REF.RData"
source_data(paste0(URL,file,"?raw=True"))
Similar to 3’UTR APA, RE of IPAs can be calculated using PASEXP_IPA:
PASEXP_IPA
:
```{r eval=FALSE}
dfIPA=dfIPA[which(dfIPA$Chrom=='chr19'),]
dfLE=dfLE[which(dfLE$Chrom=='chr19'),]
IPA_OUTraw=PASEXP_IPA(dfIPA, dfLE, flsall, Strandtype="forward", nts=1)
Note that, as a specific feature for IPA, one can set more threads using
‘nts=’(the parameter passed to Rsubread::featureCounts,
check `?Rsubread::featureCounts` for details) to increase calculation speed.
The detailed usage can be obtained by the command `?PASEXP_IPA`.
The output data frame contains read count and read density IPA upstream (a),
IPA downstream (b) and 3’-most exon region (c).
The RE of IPA is calculated as log2((a - b)/c).
```{r}
head(IPA_OUTraw,2)
Once the read coverage information is obtained for each sample, one can compare APA regulation difference between two different groups. In this analysis, there are two types of experimental design: 1) without replicates; 2) with replicates. A sample table will be generated according to the design:
```{r eval=TRUE}
sampleTable1 = data.frame(samplename = c(names(flsall)), condition = c(rep("NT",3),rep("KD",3))) sampleTable1
```{r eval=TRUE}
# Build the sample table without replicates
sampleTable2 = data.frame(samplename = c("SRR316184","SRR316187"),
condition = c("NT","KD"))
sampleTable2
To analyze 3’UTR APA between samples (KD and NT groups in the example)
without replicates, sampleTable2
is used. The function
used here is called APAdiff
(detailed information can be obtained by the
command ?APAdiff
). It will fist to go through the sample table to
determine whether it is a replicate design or non-replicate design.
Then the APA compassion will be performed.
```{r eval=TRUE}
test_3UTRsing=APAdiff(sampleTable2,DFUTRraw, conKET='NT', trtKEY='KD', PAS='3UTR', CUTreads=0)
The `APAdiff` function requires two inputs: 1) A sample table defining
groups/conditions of the samples, and 2) read coverage information of
aUTRs and cUTRs, which can be obtained by `PASEXP_3UTR` from the previous
step. The group name, i.e., treatment or control, can be defined b
`trtKEY=` and `conKET=`; the PAS type analyzed should be defined by `PAS=`;
and the read cutoff used for aUTR and cUTR is defined by `CUTreads=`
with the default value being 0. In the non-replicate design, the APA pattern
will be compared between two samples and output will be shown in a data frame:
```{r eval=TRUE}
head(test_3UTRsing,2)
table(test_3UTRsing$APAreg)
The output contains 4 columns: ‘gene symbol’ describes gene information; ‘RED’ is relative expression difference between two groups; ‘pvalue’ is statistical significance based on the Fisher’s exact test; ‘p_adj’ is FDR adjusted pvalue and ‘APAreg’ is 3’UTR APA regulation pattern in the gene. We define 3 types in ‘APAreg’, ‘UP’ means aUTR abundance in the treatment group (‘KD’ in this case) is at least 5% higher than that in control (‘NT’ in this case), and ‘pvalue’<0.05; ‘DN’ means aUTR abundance is 5% lower in treatment than that in control and p-value<0.05; ‘NC’ are the remaining genes. With respect to 3’UTR size changes, ‘UP’ means 3’UTR shortening, and ‘DN’ 3’UTR lengthening.
For the replicate design, we use t-test for significance analysis. However,
other tools based on negative binomial data distribution, such as
r BiocStyle::Biocpkg("DEXSeq")
[@DEXSEQ] might also be used.
```{r eval=TRUE}
test_3UTRmuti=APAdiff(sampleTable1, DFUTRraw, conKET='NT', trtKEY='KD', PAS='3UTR', CUTreads=0) head(test_3UTRmuti,2) table(test_3UTRmuti$APAreg)
In the replicate design, ‘RED’ is difference of averaged relative expression
between two groups; ‘pvalue’ is the p-value from t-test. In this case,
‘UP’ is defined as ‘RED’ >0 and ‘pvalue’ <0.05; while ‘DN’ is the opposite;
and ‘NC’ is the remaining genes.
## Significantly regulated APA in introns
IPA comparison is similar to 3’UTR APA using `APAdiff`, except that it
(1) uses IPA expression as input, and (2) ‘PAS=’ needs to be defined as
‘IPA’, and (3) the analysis is performed on each IPA. Note that, the direction
of IPA regulation is similar to that of 3’UTR APA. This means ‘UP’ is defined
as up-regulation of IPA (RED > 0); ‘DN’ is the opposite;
and ‘NC’ is the remaining genes.
Analysis of IPA between KD and NT groups without replicates is shown here:
```{r eval=TRUE}
test_IPAsing=APAdiff(sampleTable2,
IPA_OUTraw,
conKET='NT',
trtKEY='KD',
PAS='IPA',
CUTreads=0)
head(test_IPAsing,2)
Analysis of IPA between KD and NT groups using replicate data is shown here: ```{r eval=TRUE} test_IPAmuti=APAdiff(sampleTable1, IPA_OUTraw, conKET='NT', trtKEY='KD', PAS='IPA', CUTreads=0) head(test_IPAmuti,2)
# Visualization of analysis results
Start from APAlyzer 1.2.1, we provides two new fouction called `APAVolcano`
and `APABox` for users to plot their RED results using volcano plot and box plot.
In the volcano plot, users can also label the top genes using
`top=` or a set of specific gene using `markergenes=`, for example:
```{r eval=FALSE}
APAVolcano(test_3UTRsing, PAS='3UTR', Pcol = "pvalue", top=5, main='3UTR APA')
In the box plot, RED is ploted on 'UP', 'DN', and 'NC' genes: ```{r eval=FALSE} APABox(test_3UTRsing, xlab = "APAreg", ylab = "RED", plot_title = NULL)
In addtion to volcano and box plots, APA comparison result can be also plotted
using either boxplots or violin plots or
CDF curves. For the previous 3’UTR APA and IPA comparison outputs, one needs
to first build the plotting data frame:
```{r eval=TRUE}
test_3UTRmuti$APA="3'UTR"
test_IPAmuti$APA="IPA"
dfplot=rbind(test_3UTRmuti[,c('RED','APA')],test_IPAmuti[,c('RED','APA')])
To make violin plots and CDF curves using r BiocStyle::Biocpkg("ggplot2")
:
```{r eval=TRUE}
library(ggplot2)
```{r fig1, fig.height = 4, fig.width = 4, fig.align = "center"}
###violin
ggplot(dfplot, aes(x = APA, y = RED)) +
geom_violin(trim = FALSE) +
geom_boxplot(width = 0.2)+ theme_bw() +
geom_hline(yintercept=0, linetype="dashed", color = "red")
```{r fig2, fig.height = 4, fig.width = 5, fig.align = "center"}
ggplot(dfplot, aes( x = RED, color = APA)) + stat_ecdf(geom = "step") + ylab("cumulative fraction")+ geom_vline(xintercept=0, linetype="dashed", color = "gray")+ theme_bw() + geom_hline(yintercept=0.5, linetype="dashed", color = "gray")
# Gene expression analysis using coding regions
APA is frequently involved in gene expression regulation. To compare gene
expression vs. APA in different samples, our package provides a simple
function to assess the expression changes using RNA-seq reads
mapped to coding sequences.
## Building coding region references
```{r eval=TRUE}
suppressMessages(library("GenomicFeatures"))
suppressMessages(library("org.Mm.eg.db"))
extpath = system.file("extdata", "mm9.chr19.refGene.R.DB", package="APAlyzer")
txdb=loadDb(extpath, packageName='GenomicFeatures')
IDDB = org.Mm.eg.db
CDSdbraw=REFCDS(txdb,IDDB)
```{r eval=TRUE} DFGENEraw=GENEXP_CDS(CDSdbraw, flsall, Strandtype="forward")
# Complete Analysis Example: APA analysis in mouse testis versus heart
## About this dataset
To provide a complete tutorial of APA analysis using our package, we have now
prepared a testing dataset through down sampling of mouse RNA-Seq data in heart
(GSM900193) and testis (GSM900199):
| Sample ID | SRRID | Sample Name | Down sampling reads|
|-----------|:---------:|------------:|----------:|
| GSM900199 | SRR453175 | Heart_Rep1 | 5 Million |
| GSM900199 | SRR453174 | Heart_Rep2 | 5 Million |
| GSM900199 | SRR453173 | Heart_Rep3 | 5 Million |
| GSM900199 | SRR453172 | Heart_Rep4 | 5 Million |
| GSM900193 | SRR453143 | Testis_rep1 | 5 Million |
| GSM900193 | SRR453142 | Testis_rep2 | 5 Million |
| GSM900193 | SRR453141 | Testis_rep3 | 5 Million |
| GSM900193 | SRR453140 | Testis_rep4 | 5 Million |
## Download the bam files
```{r eval=FALSE}
download_testbam()
flsall <- dir(getwd(),".bam")
flsall<-paste0(getwd(),'/',flsall)
names(flsall)<-gsub('.bam','',dir(getwd(),".bam"))
```{r eval=FALSE} library(repmis) URL="https://github.com/RJWANGbioinfo/PAS_reference_RData/blob/master/" file="mm9_REF.RData" source_data(paste0(URL,file,"?raw=True")) PASREF=REF4PAS(refUTRraw,dfIPA,dfLE) UTRdbraw=PASREF$UTRdbraw dfIPA=PASREF$dfIPA dfLE=PASREF$dfLE
## Calculation of relative expression of 3'UTR APA and IPA
```{r eval=FALSE}
UTR_APA_OUT=PASEXP_3UTR(UTRdbraw, flsall, Strandtype="invert")
IPA_OUT=PASEXP_IPA(dfIPA, dfLE, flsall, Strandtype="invert", nts=1)
```{r eval=FALSE}
sampleTable = data.frame(samplename = c('Heart_rep1', 'Heart_rep2', 'Heart_rep3', 'Heart_rep4', 'Testis_rep1', 'Testis_rep2', 'Testis_rep3', 'Testis_rep4'), condition = c(rep("Heart",4), rep("Testis",4)))
test_3UTRAPA=APAdiff(sampleTable,UTR_APA_OUT, conKET='Heart', trtKEY='Testis', PAS='3UTR', CUTreads=5)
```{r eval=TRUE}
table(test_3UTRAPA$APAreg)
APAVolcano(test_3UTRAPA, PAS='3UTR', Pcol = "pvalue", plot_title='3UTR APA')
APABox(test_3UTRAPA, xlab = "APAreg", ylab = "RED", plot_title = NULL)
```{r eval=FALSE}
test_IPA=APAdiff(sampleTable, IPA_OUT, conKET='Heart', trtKEY='Testis', PAS='IPA', CUTreads=5)
```{r eval=TRUE}
table(test_IPA$APAreg)
APAVolcano(test_IPA, PAS='IPA', Pcol = "pvalue", plot_title='IPA')
APABox(test_IPA, xlab = "APAreg", ylab = "RED", plot_title = NULL)
How to generate a BAM file list for analysis?
A BAM file list containing both BAM file names and paths of the files. Let’s say all the BAM files are stored in bamdir, then BAM file lists can be obtained through:
{r eval=FALSE}
flsall = dir(bamdir,".bam")
flsall=paste0(bamdir,flsall)
names(flsall)=dir(bamdir,".bam")
Why am I getting error messages when I try to get txdb using makeTxDbFromUCSC?
You can try either upgrade your Bioconductor, or load the genome annotation using GTF, or load the prebuild genome annotation using ‘.R.DB’ file, e.g., mm9.refGene.R.DB.
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.