knitr::opts_chunk$set( collapse = TRUE, comment = "#>" )

```
library(FuzzySTs)
```

`is.alphacuts()`

: Verifies if a matrix is set of left and right alpha-cuts`FuzzySTs::is.alphacut()`

verifies if a given matrix can be a matrix of numerical alpha-cuts. It is then verified if the considered matrix has the following requirements: it should be composed by 2 vectors in columns with no missing values, for which the lengthes of both vectors are equal. The first vector should be increasing and named "L" as left, and the second one should be decreasing and named "U" as upper. The last value of the first vector should be less than the first value of the second vector.

# Simple example mat <- matrix(c(1,2,3,7,6,5), ncol = 2) is.alphacuts(mat)

`nbreakpoints()`

: Calculates the number of breakpoints of a numerical matrix of alpha-cutsFor a given fuzzy number expressed by its numerical alpha-cuts such that `is.alphacuts = TRUE`

, the function `FuzzySTs::nbreakpoints()`

calculates the number of breakpoints chosen to numerically construct these alpha-cuts. In other terms, it is the number of sample points on which the membership functions are evaluated.

# Simple example X <- TrapezoidalFuzzyNumber(1,2,3,4) alpha.X <- alphacut(X, seq(0,1,0.01)) nbreakpoints(alpha.X)

`GaussianFuzzyNumber()`

: Creates a Gaussian fuzzy number`FuzzySTs::GaussianFuzzyNumber()`

creates a Gaussian fuzzy number from the class of Gaussian fuzzy numbers. This number is given by its numerical alpha-cuts such that `is.alphacuts = TRUE`

. The smoothness of the constructed curve are defined by the step, the margin and the precision fixed by default to 0.01, [3 * sigma; 3 * sigma] and 4.

# Simple example GFN <- GaussianFuzzyNumber(mean = 0, sigma = 1, alphacuts = TRUE, plot=TRUE) is.alphacuts(GFN)

`GaussianBellFuzzyNumber()`

: Creates a Gaussian two-sided bell fuzzy number`FuzzySTs::GaussianBellFuzzyNumber()`

creates a two-sided Gaussian Bell fuzzy number from the class of Gaussian Bell fuzzy numbers. The constructed curve is a combination of two Gaussian curves. The smoothness of the constructed curve are defined by the step, the margin and the precision fixed by default to 0.01, [3 * left.sigma; 3 * right.sigma] and 4.

# Simple example GBFN <- GaussianBellFuzzyNumber(left.mean = -1, left.sigma = 1, right.mean = 2, right.sigma = 1, alphacuts = TRUE, plot=TRUE) is.alphacuts(GBFN)

`Fuzzy.Difference()`

: Calculates the difference between two fuzzy numbers`FuzzySTs::Fuzzy.Difference()`

calculates the difference between two trapezoidal fuzzy numbers with respect to the extension principle. In case the fuzzy numbers are not trapezoidal, and written by their numerical alpha-cuts, the function constructs a trapezoidal approximation composed by the minimum and maximum values of the left and the right alpha-cuts of the fuzzy number.

# Simple example X <- TrapezoidalFuzzyNumber(5,6,7,8) Y <- TrapezoidalFuzzyNumber(1,2,3,4) Fuzzy.Difference(X,Y)

`Fuzzy.Square()`

: Calculates numerically the square of a fuzzy number`FuzzySTs::Fuzzy.Square()`

calculates numerically the square of a fuzzy number with respect to the extension principle. The considered input fuzzy number is supposed to be trapezoidal or triangular. However, if a fuzzy number of some other types is introduced by its numerical alpha-cuts, a trapezoidal approximative fuzzy number is constructed by considering the minimum and maximum values of the left and the right alpha-cuts of the fuzzy number. The calculations are based on resolving second order polynoms.

# Simple example X <- TrapezoidalFuzzyNumber(1,2,3,4) head(Fuzzy.Square(X, plot=TRUE))

`is.fuzzification()`

: Verifies if a matrix is a fuzzification matrix`FuzzySTs::is.fuzzification()`

checks if an array can be a fuzzification matrix of a given variable. If it is verified, the considered array should fulfill the following requirements: It should be an array composed by 3 dimensions (m, n, p), where the number of lines m is the number of observations in the data set, the number of columns n is the number of chosen breakpoints, and the third dimension should be fixed to the value $p=2$ (related to the left and right alpha-cuts of a fuzzy number). The numbers of lines and columns should be the same for dimensions $p=1$, i.e. left, and $p=2$ i.e. right.

# Simple example mat <- array(c(1,1,2,2,3,3,5,5,6,6,7,7),dim=c(2,3,2)) is.fuzzification(mat)

`is.trfuzzification()`

: Verifies if a matrix is a fuzzification matrix of trapezoidal fuzzy numbers`FuzzySTs::is.trfuzzification()`

checks if a considered matrix can be a matrix of fuzzification of a variable modelled by trapezoidal fuzzy numbers written by the quadruple (p,q,r,s). The matrix should be composed by 4 columns (p,q,r,s), such that p $\leq$ q $\leq$ r $\leq$ s, where the number of lines corresponds to the number of observations of the data set. Note that for triangular fuzzy numbers, the column q is equal to the column r.

# Simple example mat <- matrix(c(1,1,2,2,3,3,4,4),ncol=4) is.trfuzzification(mat)

`tr.gfuzz()`

: Transforms a trapezoidal fuzzification matrix into a numerical one`FuzzySTs::tr.gfuzz()`

transforms a trapezoidal fuzzification matrix such that `is.trfuzzification = TRUE`

, to a 3-dimensional numerical fuzzification matrix for which `is.fuzzification = TRUE`

.

# Simple example data <- matrix(c(1,1,2,2,3,3,4,4),ncol=4) data.tr <- tr.gfuzz(data)

`FUZZ()`

: Fuzzifies a variable modelled by trapezoidal or triangular fuzzy numbers`FuzzySTs::FUZZ()`

fuzzifies a variable modelled by trapezoidal or triangular fuzzy numbers. The output is such that `is.trfuzzification = TRUE`

. The membership functions are required. They should be introduced in the following manner: they should be called "MF" attached to the index of the main-item followed by the one of the sub-item i.e. the variable, and finally the index of the linguistic term.
Note that the decomposition is supposed to be in main-items and sub-items. This syntax is the same as the one used in the fuzzification process of the package `FuzzyToolkitUoN`

.

\noindent To illustrate the programming language related to the syntax of the membership functions of the modelling fuzzy numbers, we propose this following example:

\noindent Consider a data set composed by 5 linguistic variables. The aim is to fuzzify the fourth variable of a given data base. For this example, we suppose that the decomposition in main and sub-items is needed. We propose to divide the data set into $2$ main-items as given in the following table. For each linguistic term of the considered variable, one has to choose a corresponding modelling fuzzy number. Suppose we want to model the linguistic $L_{213}$, i.e. the third linguistic term of the first variable found in the second main-item, by a fuzzy number written as $\tilde{L}_{213}$. Its membership function should then be expressed by MF213 as follows:

| Decomposition 1 | | | | | | | | | |
|------|------|------|------|------|------|------|------|------|------|
| Main-item ({mi=1}) | | | | | Main-item ({mi=2}) | | | | |
| Sub-item 1 | | Sub-item 2 | | Sub-item 3 | | Sub-item 1 | | Sub-item 2 | |
| si=1 | | si=2 | | si=3 | | si=1 | | si=2 | |
| $\tilde{L}*{111}$ | MF111 | $\tilde{L}*{121}$ | MF121 | $\tilde{L}*{131}$ | MF131 | $\tilde{L}*{211}$ | MF211 | $\tilde{L}*{221}$ | MF221 |
| $\tilde{L}*{112}$ | MF112 | $\tilde{L}*{122}$ | MF122 | $\tilde{L}*{132}$ | MF132 | $\tilde{L}*{212}$ | MF212 | $\tilde{L}*{222}$ | MF222 |
| $\tilde{L}*{113}$ | MF113 | $\tilde{L}*{123}$ | MF123 | $\tilde{L}*{133}$ | MF133 | $\tilde{L}*{213}$ | MF213 | |
| $\tilde{L}*{114}$ | MF114 | | | $\tilde{L}*{134}$ | MF134 | $\tilde{L}_{214}$ | MF214 | |

\noindent If the decomposition in main and sub-items is not required, it is then recommended to fix the index of the main-item to $1$. Consequently, the index of the sub-item will be nothing but the column position of the variable in the architecture of the data set. For the same example previously described where the fourth variable has to be fuzzified, suppose that no decomposition is desired, then the architecture becomes as seen in the following table . Therefore, the considered linguistic term $L_{213}$ of the previous example is now on called $L_{143}$ with its corresponding fuzzy number $\tilde{L}_{143}$. Its membership function will afterwards be denoted by MF143 as given by:

| Decomposition 2 | | | | | | | | | |
|------|------|------|------|------|------|------|------|------|------|
| Main-item ({mi=1}) | | | | | | | | | |
| Sub-item 1 | | Sub-item 2 | | Sub-item 3 | | Sub-item 4 | | Sub-item 5 | |
| si=1 | | si=2 | | si=3 | | si=4 | | si=5 | |
| $\tilde{L}*{111}$ | MF111 | $\tilde{L}*{121}$ | MF121 | $\tilde{L}*{131}$ | MF131 | $\tilde{L}*{141}$ | MF141 | $\tilde{L}*{151}$ | MF151 |
| $\tilde{L}*{112}$ | MF112 | $\tilde{L}*{122}$ | MF122 | $\tilde{L}*{132}$ | MF132 | $\tilde{L}*{142}$ | MF142 | $\tilde{L}*{152}$ | MF152 |
| $\tilde{L}*{113}$ | MF113 | $\tilde{L}*{123}$ | MF123 | $\tilde{L}*{133}$ | MF133 | $\tilde{L}*{143}$ | MF143 | |
| $\tilde{L}*{114}$ | MF114 | | | $\tilde{L}*{134}$ | MF134 | $\tilde{L}_{144}$ | MF144 | |

# Fuzzification of the first sub-item of a data set - No decomposition is required data <- matrix(c(1,2,3,2,2,1,1,3,1,2),ncol=1) MF111 <- TrapezoidalFuzzyNumber(0,1,1,2) MF112 <- TrapezoidalFuzzyNumber(1,2,2,3) MF113 <- TrapezoidalFuzzyNumber(2,3,3,3) PA11 <- c(1,2,3) data.fuzzified <- FUZZ(data,mi=1,si=1,PA=PA11) is.trfuzzification(data.fuzzified)

`GFUZZ()`

: Fuzzifies a variable modelled by any type of fuzzy numbers`FuzzySTs::GFUZZ()`

fuzzifies a variable modelled by any type of fuzzy numbers. The output is such that `is.fuzzification = TRUE`

. The list of possible types of fuzzy numbers is the one by the package `FuzzyNumbers`

including the functions `FuzzySTs::GaussianFuzzyNumber()`

and `FuzzySTs::GaussianBellFuzzyNumber()`

.

For the construction of the fuzzification matrix, the membership functions are required. One has the possibility to consider identical membership functions. In other terms, we mean that every linguistic will be modelled by different or identical fuzzy number across all the observations of the concerned variable.

The membership functions should be called "MF" attached to the index of the main-item followed by the one of the sub-item i.e. the variable, and finally the index of the linguistic term. This decomposition of the syntax related to the membership functions has been detailed in the description of the function `FuzzySTs::FUZZ()`

.

This function returns a numerical fuzzification array of 3 dimensions (m,n,2), with m lines, n columns and no missing values (NA).

# Fuzzification of the first sub-item of a data set - No decomposition is required data <- matrix(c(1,2,3,2,2,1,1,3,1,2),ncol=1) MF111 <- TrapezoidalFuzzyNumber(0,1,1,2) MF112 <- TrapezoidalFuzzyNumber(1,2,2,3) MF113 <- TrapezoidalFuzzyNumber(2,3,3,3) PA11 <- c(1,2,3) data.fuzzified <- GFUZZ(data,mi=1,si=1,PA=PA11) is.fuzzification(data.fuzzified)

`distance()`

: Calculates a distance between fuzzy numbers`FuzzySTs::GFUZZ()`

calculates the distance between two fuzzy numbers with respect to a distance chosen from the following family of distances: the $\rho_1$ and $\rho_2$, the Bertoluzza distance $d_{Bertoluzza}$, the $\rho^{\star}*p$ and $\delta^{\star}*{p,q}$, the middle-spread distance $d_{mid/spr}$, the $\phi$-wabl/ldev/rdev distance $d_{\phi-wabl/ldev/rdev}$, the signed distance $d_{SGD}$, the ${\theta^{\star}}$-${SGD}$ revised signed metric $d_{SGD}^{\theta^{\star}}$ and the generalized signed distance $d_{GSGD}$. The last two distances are well described in the PhD Thesis of Berkachy ("*The signed distance measure in fuzzy statistical analysis*"). Note that the numerical integrations are made by the Simpson method.

# Calculation of the distance between two fuzzy numbers X and Y X <- TrapezoidalFuzzyNumber(1,2,3,4) Y <- TrapezoidalFuzzyNumber(4,5,6,7) distance(X, Y, type = "DSGD.G") distance(X, Y, type = "GSGD")

**Any scripts or data that you put into this service are public.**

Embedding an R snippet on your website

Add the following code to your website.

For more information on customizing the embed code, read Embedding Snippets.