demean: Compute group-meaned and de-meaned variables

In datawizard: Easy Data Wrangling and Statistical Transformations

Compute group-meaned and de-meaned variables

Description

demean() computes group- and de-meaned versions of a variable that can be used in regression analysis to model the between- and within-subject effect. degroup() is more generic in terms of the centering-operation. While demean() always uses mean-centering, degroup() can also use the mode or median for centering.

Usage

demean(
  x,
  select,
  by,
  nested = FALSE,
  suffix_demean = "_within",
  suffix_groupmean = "_between",
  add_attributes = TRUE,
  verbose = TRUE
)

degroup(
  x,
  select,
  by,
  nested = FALSE,
  center = "mean",
  suffix_demean = "_within",
  suffix_groupmean = "_between",
  add_attributes = TRUE,
  verbose = TRUE
)

detrend(
  x,
  select,
  by,
  nested = FALSE,
  center = "mean",
  suffix_demean = "_within",
  suffix_groupmean = "_between",
  add_attributes = TRUE,
  verbose = TRUE
)

Arguments

x	A data frame.
select	Character vector (or formula) with names of variables to select that should be group- and de-meaned.
by	Character vector (or formula) with the name of the variable that indicates the group- or cluster-ID. For cross-classified or nested designs, by can also identify two or more variables as group- or cluster-IDs. If the data is nested and should be treated as such, set nested = TRUE. Else, if by defines two or more variables and nested = FALSE, a cross-classified design is assumed. Note that demean() and degroup() can't handle a mix of nested and cross-classified designs in one model. For nested designs, by can be: a character vector with the name of the variable that indicates the levels, ordered from highest level to lowest (e.g. by = c("L4", "L3", "L2"). a character vector with variable names in the format by = "L4/L3/L2", where the levels are separated by /. See also section De-meaning for cross-classified designs and De-meaning for nested designs below.
nested	Logical, if TRUE, the data is treated as nested. If FALSE, the data is treated as cross-classified. Only applies if by contains more than one variable.
suffix_demean, suffix_groupmean	String value, will be appended to the names of the group-meaned and de-meaned variables of x. By default, de-meaned variables will be suffixed with "_within" and grouped-meaned variables with "_between".
add_attributes	Logical, if TRUE, the returned variables gain attributes to indicate the within- and between-effects. This is only relevant when printing model_parameters() - in such cases, the within- and between-effects are printed in separated blocks.
verbose	Toggle warnings and messages.
center	Method for centering. demean() always performs mean-centering, while degroup() can use center = "median" or center = "mode" for median- or mode-centering, and also "min" or "max".

Value

A data frame with the group-/de-meaned variables, which get the suffix "_between" (for the group-meaned variable) and "_within" (for the de-meaned variable) by default. For cross-classified or nested designs, the name pattern of the group-meaned variables is the name of the centered variable followed by the name of the variable that indicates the related grouping level, e.g. predictor_L3_between and predictor_L2_between.

Heterogeneity Bias

Mixed models include different levels of sources of variability, i.e. error terms at each level. When macro-indicators (or level-2 predictors, or higher-level units, or more general: group-level predictors that vary within and across groups) are included as fixed effects (i.e. treated as covariate at level-1), the variance that is left unaccounted for this covariate will be absorbed into the error terms of level-1 and level-2 (Bafumi and Gelman 2006; Gelman and Hill 2007, Chapter 12.6.): "Such covariates contain two parts: one that is specific to the higher-level entity that does not vary between occasions, and one that represents the difference between occasions, within higher-level entities" (Bell et al. 2015). Hence, the error terms will be correlated with the covariate, which violates one of the assumptions of mixed models (iid, independent and identically distributed error terms). This bias is also called the heterogeneity bias (Bell et al. 2015). To resolve this problem, level-2 predictors used as (level-1) covariates should be separated into their "within" and "between" effects by "de-meaning" and "group-meaning": After demeaning time-varying predictors, "at the higher level, the mean term is no longer constrained by Level 1 effects, so it is free to account for all the higher-level variance associated with that variable" (Bell et al. 2015).

Panel data and correlating fixed and group effects

demean() is intended to create group- and de-meaned variables for panel regression models (fixed effects models), or for complex random-effect-within-between models (see Bell et al. 2015, 2018), where group-effects (random effects) and fixed effects correlate (see Bafumi and Gelman 2006). This can happen, for instance, when analyzing panel data, which can lead to Heterogeneity Bias. To control for correlating predictors and group effects, it is recommended to include the group-meaned and de-meaned version of time-varying covariates (and group-meaned version of time-invariant covariates that are on a higher level, e.g. level-2 predictors) in the model. By this, one can fit complex multilevel models for panel data, including time-varying predictors, time-invariant predictors and random effects.

Why mixed models are preferred over fixed effects models

A mixed models approach can model the causes of endogeneity explicitly by including the (separated) within- and between-effects of time-varying fixed effects and including time-constant fixed effects. Furthermore, mixed models also include random effects, thus a mixed models approach is superior to classic fixed-effects models, which lack information of variation in the group-effects or between-subject effects. Furthermore, fixed effects regression cannot include random slopes, which means that fixed effects regressions are neglecting "cross-cluster differences in the effects of lower-level controls (which) reduces the precision of estimated context effects, resulting in unnecessarily wide confidence intervals and low statistical power" (Heisig et al. 2017).

Terminology

The group-meaned variable is simply the mean of an independent variable within each group (or id-level or cluster) represented by by. It represents the cluster-mean of an independent variable. The regression coefficient of a group-meaned variable is the between-subject-effect. The de-meaned variable is then the centered version of the group-meaned variable. De-meaning is sometimes also called person-mean centering or centering within clusters. The regression coefficient of a de-meaned variable represents the within-subject-effect.

De-meaning with continuous predictors

For continuous time-varying predictors, the recommendation is to include both their de-meaned and group-meaned versions as fixed effects, but not the raw (untransformed) time-varying predictors themselves. The de-meaned predictor should also be included as random effect (random slope). In regression models, the coefficient of the de-meaned predictors indicates the within-subject effect, while the coefficient of the group-meaned predictor indicates the between-subject effect.

De-meaning with binary predictors

For binary time-varying predictors, there are two recommendations. First is to include the raw (untransformed) binary predictor as fixed effect only and the de-meaned variable as random effect (random slope). The alternative would be to add the de-meaned version(s) of binary time-varying covariates as additional fixed effect as well (instead of adding it as random slope). Centering time-varying binary variables to obtain within-effects (level 1) isn't necessary. They have a sensible interpretation when left in the typical 0/1 format (Hoffmann 2015, chapter 8-2.I). demean() will thus coerce categorical time-varying predictors to numeric to compute the de- and group-meaned versions for these variables, where the raw (untransformed) binary predictor and the de-meaned version should be added to the model.

De-meaning of factors with more than 2 levels

Factors with more than two levels are demeaned in two ways: first, these are also converted to numeric and de-meaned; second, dummy variables are created (binary, with 0/1 coding for each level) and these binary dummy-variables are de-meaned in the same way (as described above). Packages like panelr internally convert factors to dummies before demeaning, so this behaviour can be mimicked here.

De-meaning interaction terms

There are multiple ways to deal with interaction terms of within- and between-effects.

• A classical approach is to simply use the product term of the de-meaned variables (i.e. introducing the de-meaned variables as interaction term in the model formula, e.g. y ~ x_within * time_within). This approach, however, might be subject to bias (see Giesselmann & Schmidt-Catran 2020).

• Another option is to first calculate the product term and then apply the de-meaning to it. This approach produces an estimator "that reflects unit-level differences of interacted variables whose moderators vary within units", which is desirable if no within interaction of two time-dependent variables is required. This is what demean() does internally when select contains interaction terms.

• A third option, when the interaction should result in a genuine within estimator, is to "double de-mean" the interaction terms (Giesselmann & Schmidt-Catran 2018), however, this is currently not supported by demean(). If this is required, the wmb() function from the panelr package should be used.

To de-mean interaction terms for within-between models, simply specify the term as interaction for the select-argument, e.g. select = "a*b" (see 'Examples').

De-meaning for cross-classified designs

demean() can handle cross-classified designs, where the data has two or more groups at the higher (i.e. second) level. In such cases, the by-argument can identify two or more variables that represent the cross-classified group- or cluster-IDs. The de-meaned variables for cross-classified designs are simply subtracting all group means from each individual value, i.e. fully cluster-mean-centering (see Guo et al. 2024 for details). Note that de-meaning for cross-classified designs is not equivalent to de-meaning of nested data structures from models with three or more levels. Set nested = TRUE to explicitly assume a nested design. For cross-classified designs, de-meaning is supposed to work for models like y ~ x + (1|level3) + (1|level2), but not for models like y ~ x + (1|level3/level2). Note that demean() and degroup() can't handle a mix of nested and cross-classified designs in one model.

De-meaning for nested designs

Brincks et al. (2017) have suggested an algorithm to center variables for nested designs, which is implemented in demean(). For nested designs, set nested = TRUE and specify the variables that indicate the different levels in descending order in the by argument. E.g., ⁠by = c("level4", "level3, "level2")⁠ assumes a model like y ~ x + (1|level4/level3/level2). An alternative notation for the by-argument would be by = "level4/level3/level2", similar to the formula notation.

Analysing panel data with mixed models using lme4

A description of how to translate the formulas described in Bell et al. 2018 into R using lmer() from lme4 can be found in this vignette.

References

• Bafumi J, Gelman A. 2006. Fitting Multilevel Models When Predictors and Group Effects Correlate. In. Philadelphia, PA: Annual meeting of the American Political Science Association.

• Bell A, Fairbrother M, Jones K. 2019. Fixed and Random Effects Models: Making an Informed Choice. Quality & Quantity (53); 1051-1074

• Bell A, Jones K. 2015. Explaining Fixed Effects: Random Effects Modeling of Time-Series Cross-Sectional and Panel Data. Political Science Research and Methods, 3(1), 133–153.

• Brincks, A. M., Enders, C. K., Llabre, M. M., Bulotsky-Shearer, R. J., Prado, G., and Feaster, D. J. (2017). Centering Predictor Variables in Three-Level Contextual Models. Multivariate Behavioral Research, 52(2), 149–163. https://doi.org/10.1080/00273171.2016.1256753

• Gelman A, Hill J. 2007. Data Analysis Using Regression and Multilevel/Hierarchical Models. Analytical Methods for Social Research. Cambridge, New York: Cambridge University Press

• Giesselmann M, Schmidt-Catran, AW. 2020. Interactions in fixed effects regression models. Sociological Methods & Research, 1–28. https://doi.org/10.1177/0049124120914934

• Guo Y, Dhaliwal J, Rights JD. 2024. Disaggregating level-specific effects in cross-classified multilevel models. Behavior Research Methods, 56(4), 3023–3057.

• Heisig JP, Schaeffer M, Giesecke J. 2017. The Costs of Simplicity: Why Multilevel Models May Benefit from Accounting for Cross-Cluster Differences in the Effects of Controls. American Sociological Review 82 (4): 796–827.

• Hoffman L. 2015. Longitudinal analysis: modeling within-person fluctuation and change. New York: Routledge

See Also

If grand-mean centering (instead of centering within-clusters) is required, see center(). See performance::check_heterogeneity_bias() to check for heterogeneity bias.

Examples

data(iris)
iris$ID <- sample(1:4, nrow(iris), replace = TRUE) # fake-ID
iris$binary <- as.factor(rbinom(150, 1, .35)) # binary variable

x <- demean(iris, select = c("Sepal.Length", "Petal.Length"), by = "ID")
head(x)

x <- demean(iris, select = c("Sepal.Length", "binary", "Species"), by = "ID")
head(x)


# demean interaction term x*y
dat <- data.frame(
  a = c(1, 2, 3, 4, 1, 2, 3, 4),
  x = c(4, 3, 3, 4, 1, 2, 1, 2),
  y = c(1, 2, 1, 2, 4, 3, 2, 1),
  ID = c(1, 2, 3, 1, 2, 3, 1, 2)
)
demean(dat, select = c("a", "x*y"), by = "ID")

# or in formula-notation
demean(dat, select = ~ a + x * y, by = ~ID)

datawizard documentation built on Oct. 6, 2024, 1:08 a.m.