inst/HiGHS/docs/src/guide/further.md

In highs: 'HiGHS' Optimization Solver

Further features

Model and solution management

HiGHS has comprehensive tools for defining and extracting models. This can be done either to/from MPS or (CPLEX) format LP files, or via method calls. HiGHS also has methods that permit the incumbent model to be modified. Solutions can be supplied and extracted using either files or method calls.

Extracting model data

The numbers of column, rows and nonzeros in the model are returned by the methods getNumCols, getNumRows, and getNumEntries respectively.

Model data can be extracted for a single column or row by specifying the index of the column or row and calling the methods getCol and getRow.

As well as returning the value of the cost and bounds, these methods also return the number of nonzeros in the corresponding column or row of the constraint matrix. The indices and values of the nonzeros can be obtained using the methods getColEntries and getRowEntries.

For multiple columns and rows defined by a set of indices, the corresponding data can be extracted using the methods getCols, getRows, getColsEntries and getRowsEntries.

Specific matrix coefficients obtained using the method getCoeff.

Modifying model data

The most immediate model modification is to change the sense of the objective. By default, HiGHS minimizes the model's objective function. The objective sense can be set to minimize (maximize) using changeObjectiveSense.

Model data for can be changed for one column or row by specifying the index of the column or row, together with the new scalar value for the cost or bounds, the specific methods being changeColCost, changeColBounds. The corresponding method for a row is changeRowBounds. Changes for multiple columns or rows are defined by supplying a list of indices, together with arrays of new values, using the methods changeColsCost, changeColsBounds. The corresponding method for a row is changeRowsBounds. An individual matrix coefficient is changed by passing its row index, column index and new value to changeCoeff.

Hot start

It may be possible for HiGHS to start solving a model using data obtained by solving a related model, or supplied by a user. Whether this is possible depends on the the class of model being solved, the solver to be used, and the modifications (if any) that have been to the incumbent model since it was last solved.

LP

To run HiGHS from a user-defined solution or basis, this is passed to HiGHS using the methods setSolution or setBasis. The basis passed to HiGHS need not be complete

• There can be more basic variables then the number of rows in the model. HiGHS will identify a set of basic variables of the correct dimension by making some basic variables nonbasic

• There can be fewer basic variables then the number of rows in the model. HiGHS will identify a set of basic variables of the correct dimension by adding basic variables corresponding to slacks.

• For nonbasic variables, it is unnecessary to specify whether they are at their lower or upper bound unless they are "boxed" variables.

MIP

If a (partial) feasible assignment of the integer variables is known, this can be passed to HiGHS via setSolution. If integer variables are set to integer values, HiGHS will solve the LP with these integer variables fixed (or MIP if the assignment of the integer variables is not complete). If a feasible solution is obtained, it will be used to provide the MIP solver with an initial primal bound when it run to solve for all integer variables.

Presolve

HiGHS has a sophisticated presolve procedure for LPs and MIPs that aims to reduce the dimension of the model that must be solved. In most cases, the time saved by solving the reduced model is very much greater than the time taken to perform presolve. Once he presolved model is solved, a postsolve procedure (of minimal computational cost) deduces the optimal solution to the original model. Hence presolve is performed by default. The only exception occus when there is a valid basis for an LP and the simplex solver is used. In this case the original LP is solved, starting from this basis. In cases where the use of presolve is found not to be advantageous, its use can be switched off by setting the presolve option to "off".

HiGHS has a method presolve that performs presolve on the incumbent model, allowing the presolved model to be extracted or written to a file. This is intended for users who have their own solution technique that they wish to test using models presolved by HiGHS. Note that this does not affect how the incumbent model is solved. There are two corresponding postsolve methods, according to whether there are just solution values, or also a basis.

Multi-objective optimization

Users can specify multiple linear objectives with respect to which HiGHS will optimize by either blending them, or by performing lexicographic optimization according to the truth of the blend_multi_objectives option. Each linear objective is represented by the following data, held in the HighsLinearObjective structure

• weight: Scalar of type double - The weight of this objective when blending
• offset: Scalar of type double - The offset of this objective
• coefficients: Vector of type double - The coefficients of this objective
• abs_tolerance: Scalar of type double - The absolute tolerance on this objective when performing lexicographic optimization
• rel_tolerance: Scalar of type double - The relative tolerance on this objective when performing lexicographic optimization
• priority: Scalar of type HighsInt - The priority of this objective when performing lexicographic optimization

Methods

Multi-objective optimization in HiGHS is defined by the following methods

• [addLinearObjective](@ref Multi-objective-optimization] - Add a single HighsLinearObjective instance to any already stored in HiGHS
• [clearLinearObjectives](@ref Multi-objective-optimization] - Clears any linear objectives stored in HiGHS

When there is at least one HighsLinearObjective instance in HiGHS, the col_cost_ data in the incumbent model is ignored.

Blending multiple linear objectives

When blend_multi_objectives is true, as it is by default, any HighsLinearObjective instances will be combined according to the weight values, and the resulting objective will be minimized. Hence, any objectives that should be maximized within the combination must have a negative weight value.

Lexicographic optimization of multiple linear objectives

When blend_multi_objectives is false, HiGHS will optimize lexicographically with respect to any HighsLinearObjective instances. This is carried out as follows, according to the priority values in HighsLinearObjective instances. Note that all priority values must be distinct.

• Minimize/maximize with respect to the linear objective of highest priority value, according to whether its weight is positive/negative

• Add a constraint to the model so that the value of the linear objective of highest priority satsifies a bound given by the values of abs_tolerance and/or rel_tolerance.

  • If the objective was minimized to a value f^*\ge0, then the constraint ensures that the this objective value is no greater than \min(f^*+abs\_tolerance,~f^*\times[1+rel\_tolerance]).

  • If the objective was minimized to a value f^*<0, then the constraint ensures that the this objective value is no greater than \min(f^*+abs\_tolerance,~f^*\times[1-rel\_tolerance]).

  • If the objective was maximized to a value f^*\ge0, then the constraint ensures that the this objective value is no less than \max(f^*-abs\_tolerance,~f^*\times[1-rel\_tolerance]).

  • If the objective was maximized to a value f^*<0, then the constraint ensures that the this objective value is no less than \max(f^*-abs\_tolerance,~f^*\times[1+rel\_tolerance]).

• Minimize/maximize with respect to the linear objective of next highest priority, and then add a corresponding objective constraint to the model, repeating until optimization with respect to the linear objective of lowest priority has taken place.

Note

• Negative values of abs_tolerance and rel_tolerance will be ignored. This is a convenient way of "switching off" a bounding technique that is not of interest.
• When the model is continuous, no dual information will be returned if there is more than one linear objective.

highs documentation built on April 4, 2025, 3:23 a.m.