oa: Perturbation of the seawater carbonate system

In seacarb: Seawater Carbonate Chemistry

Perturbation of the seawater carbonate system

Description

Describes the various approaches that can be used to alter the seawater carbonate system. Its main purpose is to assist the design of ocean acidification perturbation experiments.

Usage

oa(flag, var1, var2, pCO2f, pCO2s=1e6, S=35, T=25, P=0, 
	Pt=0, Sit=0, k1k2='x', kf='x', ks="d", pHscale="T", plot=FALSE, 
	b="u74", eos = "eos80", long = 1e+20, lat = 1e+20)

Arguments

flag	select the couple of variables available to describe the initial seawater. The flags which can be used are: flag = 1 pH and CO2 given flag = 2 CO2 and HCO3 given flag = 3 CO2 and CO3 given flag = 4 CO2 and ALK given flag = 5 CO2 and DIC given flag = 6 pH and HCO3 given flag = 7 pH and CO3 given flag = 8 pH and ALK given flag = 9 pH and DIC given flag = 10 HCO3 and CO3 given flag = 11 HCO3 and ALK given flag = 12 HCO3 and DIC given flag = 13 CO3 and ALK given flag = 14 CO3 and DIC given flag = 15 ALK and DIC given flag = 21 pCO2 and pH given flag = 22 pCO2 and HCO3 given flag = 23 pCO2 and CO3 given flag = 24 pCO2 and ALK given flag = 25 pCO2 and DIC given
var1	Value of the first variable available to describe the initial seawater, in mol/kg except for pH and for pCO2 in uatm
var2	Value of the second variable available to describe the initial seawater, in mol/kg except for pH
pCO2f	pCO2 target value, in uatm
pCO2s	pCO2s is the pCO2, in uatm, of the “high-CO2” seawater that will be mixed with “normal seawater”. The default value is 10^6 uatm, that is seawater bubbled with pure CO2 gas and saturated with CO2.
S	Salinity, default is 35
T	Temperature in degrees Celsius, default is 25
P	Hydrostatic pressure in bar (surface = 0), default is 0
Pt	Concentration of total phosphate in mol/kg, default is 0
Sit	Concentration of total silicate in mol/kg, default is 0
k1k2	"l" for using K1 and K2 from Lueker et al. (2000), "m02" from Millero et al. (2002), "m06" from Millero et al. (2006), "m10" from Millero (2010), "mp2" from Mojica Prieto et al. (2002), "p18" from Papadimitriou et al. (2018), "r" from Roy et al. (1993), "sb21" from Shockman & Byrne (2021), "s20" from Sulpis et al. (2020), and "w14" from Waters et al. (2014). "x" is the default flag; the default value is then "l", except if T is outside the range 2 to 35oC and/or S is outside the range 19 to 43. In these cases, the default value is "w14".
kf	"pf" for using Kf from Perez and Fraga (1987) and "dg" for using Kf from Dickson and Riley (1979 in Dickson and Goyet, 1994). "x" is the default flag; the default value is then "pf", except if T is outside the range 9 to 33oC and/or S is outside the range 10 to 40. In these cases, the default is "dg".
ks	"d" for using Ks from Dickon (1990), "k" for using Ks from Khoo et al. (1977), default is "d"
pHscale	"T" for the total scale, "F" for the free scale and "SWS" for using the seawater scale, default is "T" (total scale)
plot	A plot of the different perturbation methods can be plotted in a DIC vs ALK field with pCO2 isoclines are drawn in the back. Default is false.
b	Concentration of total boron. "l10" for the Lee et al. (2010) formulation or "u74" for the Uppstrom (1974) formulation, default is "u74".
eos	"teos10" to specify T and S according to Thermodynamic Equation Of Seawater - 2010 (TEOS-10); "eos80" to specify T and S according to EOS-80.
long	longitude of data point, used when eos parameter is "teos10" as a conversion parameter from absolute to practical salinity.
lat	latitude of data point, used when eos parameter is "teos10".

Details

The Lueker et al. (2000) constants for K1 and K2, the Perez and Fraga (1987) constant for Kf and the Dickson (1990) constant for Ks are recommended by Dickson et al. (2007). It is, however, critical to consider that each formulation is only valid for specific ranges of temperature and salinity:

For K1 and K2:

• Lueker et al. (2000): S ranging between 19 and 43 and T ranging between 2 and 35oC.

• Millero et al. (2002): S ranging from 34 to 37 and T ranging between -1.6 and 35oC.

• Millero et al. (2006): S ranging between 0.1 and 50 and T ranging between 1 and 50oC.

• Millero (2010): S ranging between 1 and 50 and T ranging between 0 and 50oC. Millero (2010) provides a K1 and K2 formulation for the seawater, total and free pH scales. Therefore, when this method is used and if P=0, K1 and K2 are computed with the formulation corresponding to the pH scale given in the flag "pHscale".

• Mojica Prieto et al. (2002): S ranging from 5 to 42 and T ranging between 0 and 45oC.

• Papadimitriou et al. (2018): S ranging from 33 to 100 and T ranging between -6 to 25oC.

• Roy et al. (1993): S ranging between 5 and 45 and T ranging between 0 and 45oC.

• Shockman & Byrne (2021): for K2, S ranging from 19.6 to 41 and T ranging between 15 to 35oC. For K1, formulation is that of Waters et al.

• Sulpis et al. (2020): S ranging from 30.7 to 37.6 and T ranging between -1.7 to 31.8oC.

• Waters et al.(2014): S ranging between 1 and 50 and T ranging between 0 and 50oC. Waters (2014) provides a K1 and K2 formulation for the seawater, total and free pH scales. Therefore, when this method is used and if P=0, K1 and K2 are computed with the formulation corresponding to the pH scale given in the flag "pHscale".

For Kf:

• Perez and Fraga (1987): S ranging between 10 and 40 and T ranging between 9 and 33oC.

• Dickson and Riley (1979 in Dickson and Goyet, 1994): S ranging between 0 and 45 and T ranging between 0 and 45oC.

For Ks:

• Dickson (1990): S ranging between 5 and 45 and T ranging between 0 and 45oC.

• Khoo et al. (1977): S ranging between 20 and 45 and T ranging between 5 and 40oC.

The arguments can be given as a unique number or as vectors. If the lengths of the vectors are different, the longer vector is retained and only the first value of the other vectors is used. It is recommended to use either vectors with the same dimension or one vector for one argument and numbers for the other arguments.

Pressure corrections and pH scale:

• For K0, the pressure correction term of Weiss (1974) is used.

• For K1, K2, pK1, pK2, pK3, Kw, Kb, Khs and Ksi, the pressure correction was applied on the seawater scale. Hence, if needed, values were first transformed from the total scale to the seawater scale, the pressure correction applied as described by Millero (1995), and the value was transformed back to the required scale (T, F or SWS).

• For Kf, the pressure correction was applied on the free scale. The formulation of Dickson and Riley (1979 in Dickson and Goyet, 1994) provides Kf on the free scale but that of Perez and Fraga (1987) provides it on the total scale. Hence, in that case, Kf was first transformed from the total scale to the free scale. With both formulations, the pressure correction was applied as described by Millero (1995), and the value was transformed back to the required scale (T, F or SWS).

• For Ks, the pressure correction was applied on the free scale. The pressure correction was applied as described by Millero (1995), and the value was transformed back to the required scale (T, F or SWS).

• For Kn, The pressure correction was applied on the seawater scale. The pressure correction was applied as described by Millero (1995), and the value was transformed back to the required scale (T, F or SWS).

Value

The function returns a list built as follows:

description	A table describing in plain English the various ways to reach the target pCO2. Note that if a vector is given in argument only the first value is used.
perturbation	Table providing key parameters for the following methods: CO2 bubbling: high-CO2 air is bubbled in seawater. The first parameter is the value of the pCO2 in the air required to bubble the seawater (in uatm). SW mixing: mixing of “normal” and “high-CO2” seawater. The fist parameter, “Weight fraction high-CO2 SW” or wf, is the weight fraction of the high-CO2 seawater per kg seawater. Addition of acid: strong acid is added to seawater. Note that this method is not recommended because it does not closely mimic natural ocean acidification (Gattuso and Lavigne, 2009). The first parameter, H+ (mol/kg), is the amount of H+ that must be added (mol/kg). The acid must be fortified with NaCl in order to have the same salinity than seawater. Addition of HCO3 and acid: bicarbonate (HCO3) and a strong acid are added. The first parameter, HCO3, is the amount of HCO3 that must be added (mol/kg). The second parameter, H+, is the quantity of H+ that must be added (mol/kg). The acid must be fortified with NaCl in order to have the same salinity than seawater. Addition of CO3 and acid: carbonate, CO3, and a strong acid are added. The first parameter, HCO3, is the quantity of CO3 that must be added (mol/kg). The second parameter, H+, is the quantity of H+ that must be added (mol/kg).
summary	Table summarizing the carbonate chemistry before and after applying each perturbation: pCO2 bubbling, mixing with high-CO2 seawater, addition of strong acid, and addition of bicarbonate/carbonate and strong acid.

Warnings

• It is recommended to use concentrated solutions of acid or base in order to add small volumes.

• The addition of strong acid does not simulate well natural ocean acidification (higher concentration of dissolved inorganic carbon at constant total alkalinity) since it generates a decrease in total alkalinity while dissolved inorganic carbon is kept constant.

• Other important advice is provided in Gattuso and Lavigne (2009), Schulz et al. (2009) and in the “Guide for Best Practices on Ocean Acidification Research and Data Reporting” (https://www.iaea.org/sites/default/files/18/06/oa-guide-to-best-practices.pdf)

long and lat are used as conversion parameters from absolute to practical salinity: when seawater is not of standard composition, practical salinity alone is not sufficient to compute absolute salinity and vice-versa. One needs to know the density. When long and lat are given, density is inferred from WOA silicate concentration at given location. When they are not, an arbitrary geographic point is chosen: mid equatorial Atlantic. Note that this implies an error on computed salinity up to 0.02 g/kg.

Author(s)

Heloise Lavigne and Jean-Pierre Gattuso [e-mail]

References

Dickson A. G., 1990 Standard potential of the reaction: AgCI(s) + 1/2H2(g) = Ag(s) + HCI(aq), and the standard acidity constant of the ion HSO4 in synthetic sea water from 273.15 to 318.15 K. Journal of Chemical Thermodynamics 22, 113-127.

Dickson A. G., Sabine C. L. and Christian J. R., 2007 Guide to best practices for ocean CO2 measurements. PICES Special Publication 3, 1-191.

Khoo H. K., Ramette R. W., Culberson C. H. and Bates R. G., 1977 Determination of Hydrogen Ion Concentration in Seawater from 5 to 40oC: Standard Potentials at Salinities from 20 to 45. Analytical Chemistry 49, 29-34.

Gattuso J.-P. and Lavigne H., 2009 Technical note: approaches and software tools to investigate the impact of ocean acidification. Biogeosciences 21, 6:2121-2133.

Lueker T. J., Dickson A. G. and Keeling C. D., 2000 Ocean pCO2 calculated from dissolved inorganic carbon, alkalinity, and equations for K1 and K2: validation based on laboratory measurements of CO2 in gas and seawater at equilibrium. Marine Chemistry 70 105-119.

Lee K., Tae-Wook K., Byrne R.H., Millero F.J., Feely R.A. and Liu Y-M, 2010 The universal ratio of the boron to chlorinity for the North Pacific and North Atlantoc oceans. Geochimica et Cosmochimica Acta 74 1801-1811.

Millero F. J., 2010 Carbonate constant for estuarine waters. Marine and Freshwater Research 61: 139-142.

Millero F. J., Graham T. B., Huang F., Bustos-Serrano H. and Pierrot D., 2006. Dissociation constants of carbonic acid in seawater as a function of salinity and temperature. Marine Chemistry 100, 80-84.

Perez F. F. and Fraga F., 1987 Association constant of fluoride and hydrogen ions in seawater. Marine Chemistry 21, 161-168.

Roy R. N., Roy L. N., Vogel K. M., Porter-Moore C., Pearson T., Good C. E., Millero F. J. and Campbell D. M., 1993 The dissociation constants of carbonic acid in seawater at salinities 5 to 45 and temperatures 0 to 45oC. Marine Chemistry 44, 249-267.

Schockman, K.M., Byrne, R.H., 2021. Spectrophotometric determination of the bicarbonate dissociation constant in seawater, Geochimica et Cosmochimica Acta.

Schulz K. G., Barcelos e Ramos J., Zeebe R. E. and Riebesell U., 2009 CO2 perturbation experiments: similarities and differences between dissolved inorganic carbon and total alkalinity manipulations. Biogeosciences 6, 2145-2153.

Uppstrom L.R., 1974 The boron/chlorinity ratio of the deep-sea water from the Pacific Ocean. Deep-Sea Research I 21 161-162.

Waters, J., Millero, F. J., and Woosley, R. J., 2014. Corrigendum to “The free proton concentration scale for seawater pH”, [MARCHE: 149 (2013) 8-22], Marine Chemistry 165, 66-67.

Zeebe R. E. and Wolf-Gladrow D. A., 2001 CO2 in seawater: equilibrium, kinetics, isotopes. Amsterdam: Elsevier, 346 pp.

See Also

carb, pgas, pmix, ppH, pTA.

Examples

oa(flag=24, var1=384, var2=2325e-6, pCO2s=1e6, pCO2f=793, S=34.3, T=16, 
	P=0, pHscale="T", kf="pf", k1k2="l", ks="d", plot=TRUE, b="u74")

seacarb documentation built on May 31, 2023, 8:31 p.m.