knitr::opts_chunk$set( collapse = TRUE, warning = FALSE, fig.height = 6, fig.width = 7, fig.path = "fig/tut03-", dev = "png", comment = "##" ) # save some typing knitr::set_alias(w = "fig.width", h = "fig.height", cap = "fig.cap") # preload datasets ??? set.seed(1071) library(vcd) library(vcdExtra) library(ggplot2) data(HairEyeColor) data(PreSex) data(Arthritis, package="vcd") art <- xtabs(~Treatment + Improved, data = Arthritis) if(!file.exists("fig")) dir.create("fig")
You can use the loglm()
function in the MASS
package to fit log-linear
models. Equivalent models can also be fit (from a different perspective) as generalized
linear models with the glm()
function using the family='poisson'
argument,
and the gnm
package provides a wider range of generalized nonlinear models,
particularly for testing structured associations.
The visualization methods for these models were originally developed for models fit using loglm()
,
so this approach is emphasized here. Some extensions of these methods for models
fit using glm()
and gnm()
are contained in the vcdExtra
package
and illustrated in @ref(sec:glm).
Assume we have a 3-way contingency table based on
variables A, B, and C.
The possible different forms of loglinear models for a 3-way table are shown in the table below.
\@(tab:loglin-3way)
The Model formula column shows how to express each model for loglm()
in R.
^[For glm()
, or gnm()
, with the data in the form of a frequency data.frame, the same model is specified
in the form glm(Freq
$\sim$ ..., family="poisson")
, where Freq
is the name
of the cell frequency variable and ...
specifies the Model formula.]
In the Interpretation column, the symbol "$\perp$" is to be read as "is independent of,"
and "$\;|\;$" means "conditional on," or "adjusting for," or just "given".
| Model | Model formula | Symbol | Interpretation |
|:-------------------------|:-------------------|:---------------|:-----------------------|
| Mutual independence | ~A + B + C
| $[A][B][C]$ | $A \perp B \perp C$ |
| Joint independence | ~A*B + C
| $[AB][C]$ | $(A \: B) \perp C$ |
| Conditional independence | ~(A+B)*C
| $[AC][BC]$ | $(A \perp B) \;|\; C$ |
| All two-way associations | ~A*B + A*C + B*C
| $[AB][AC][BC]$ | homogeneous association|
| Saturated model | ~A*B*C
| $[ABC]$ | 3-way association |
For example, the formula ~A + B + C
specifies the model of mutual independence with
no associations among the three factors. In standard notation for the expected frequencies
$m_{ijk}$, this corresponds to
$$ \log ( m_{ijk} ) = \mu + \lambda_i^A + \lambda_j^B + \lambda_k^C \equiv A + B + C $$
The parameters $\lambda_i^A , \lambda_j^B$ and $\lambda_k^C$ pertain to the differences among the one-way marginal frequencies for the factors A, B and C.
Similarly, the model of joint independence, $(A \: B) \perp C$, allows an association between A and B, but specifies that C is independent of both of these and their combinations,
$$ \log ( m_{ijk} ) = \mu + \lambda_i^A + \lambda_j^B + \lambda_k^C + \lambda_{ij}^{AB} \equiv A * B + C $$
where the parameters $\lambda_{ij}^{AB}$ pertain to the overall association between A and B (collapsing over C).
In the literature or text books, you will often find these models expressed in shorthand symbolic notation,
using brackets, [ ]
to enclose the high-order terms in the model.
Thus, the joint independence model can be denoted [AB][C]
, as shown in the Symbol column in the table.
\@(tab:loglin-3way).
Models of conditional independence allow (and fit) two of the three possible
two-way associations. There are three such models, depending on which variable is conditioned upon.
For a given conditional independence model, e.g., [AB][AC]
, the given variable is the one
common to all terms, so this example has the interpretation $(B \perp C) \;|\; A$.
loglm()
{#sec:loglm}For example, we can fit the model of mutual independence among hair color, eye color and sex
in HairEyeColor
as
library(MASS) ## Independence model of hair and eye color and sex. hec.1 <- loglm(~Hair+Eye+Sex, data=HairEyeColor) hec.1
Similarly, the models of conditional independence and joint independence are specified as
## Conditional independence hec.2 <- loglm(~(Hair + Eye) * Sex, data=HairEyeColor) hec.2
## Joint independence model. hec.3 <- loglm(~Hair*Eye + Sex, data=HairEyeColor) hec.3
Note that printing the model gives a brief summary of the goodness of fit.
A set of models can be compared using the anova()
function.
anova(hec.1, hec.2, hec.3)
glm()
and gnm()
{#sec:glm}The glm()
approach, and extensions of this in the gnm
package allows a
much wider class of models for frequency data to be fit than can be handled by
loglm()
. Of particular importance are models for ordinal factors and for
square tables, where we can test more structured hypotheses about the patterns
of association than are provided in the tests of general association under
loglm()
. These are similar in spirit to the
non-parametric CMH tests described in \@ref(sec:CMH).
Example:
The data Mental
in the vcdExtra
package gives a two-way table in frequency form
classifying young people by
their mental health status and parents' socioeconomic status (SES), where
both of these variables are ordered factors.
data(Mental, package = "vcdExtra") str(Mental) xtabs(Freq ~ mental + ses, data=Mental) # display the frequency table
Simple ways of handling ordinal variables involve assigning scores to the table
categories, and the simplest cases are to use integer scores, either for the row variable (column
effects'' model), the column variable (
row effects'' model), or both (``uniform association''
model).
indep <- glm(Freq ~ mental + ses, family = poisson, data = Mental) # independence model
To fit more parsimonious models than general association, we can define numeric scores for the row and column categories
# Use integer scores for rows/cols Cscore <- as.numeric(Mental$ses) Rscore <- as.numeric(Mental$mental)
Then, the row effects model, the column effects model, and the uniform association model can be fit as follows. The essential idea is to replace a factor variable with its numeric equivalent in the model formula for the association term.
# column effects model (ses) coleff <- glm(Freq ~ mental + ses + Rscore:ses, family = poisson, data = Mental) # row effects model (mental) roweff <- glm(Freq ~ mental + ses + mental:Cscore, family = poisson, data = Mental) # linear x linear association linlin <- glm(Freq ~ mental + ses + Rscore:Cscore, family = poisson, data = Mental)
The LRstats()
function in vcdExtra
provides a nice, compact summary of
the fit statistics for a set of models, collected into a glmlist object.
Smaller is better for AIC and BIC.
# compare models using AIC, BIC, etc vcdExtra::LRstats(glmlist(indep, roweff, coleff, linlin))
For specific model comparisons, we can also carry out tests of nested models with
anova()
when those models are listed from smallest to largest.
Here, there are two separate paths from the most restrictive (independence) model
through the model of uniform association, to those that allow only one of
row effects or column effects.
anova(indep, linlin, coleff, test="Chisq") anova(indep, linlin, roweff, test="Chisq")
The model of linear by linear association seems best on all accounts. For comparison, one might try the CMH tests on these data:
CMHtest(xtabs(Freq~ses+mental, data=Mental))
The strength of the gnm
package is that it handles a wide variety of models
that handle non-linear terms, where the parameters enter the model beyond a simple
linear function.
The simplest example is the Goodman RC(1) model [@Goodman:79],
which allows a multiplicative
term to account for the association of the table variables.
In the notation of generalized linear models with a log link, this can be expressed as
$$ \log \mu_{ij} = \alpha_i + \beta_j + \gamma_{i} \delta_{j} ,$$
where the row-multiplicative effect parameters $\gamma_i$ and corresponding column parameters $\delta_j$ are estimated from the data.% ^[This is similar in spirit to a correspondence analysis with a single dimension, but as a statistical model.]
Similarly, the RC(2) model adds two multiplicative terms to the independence model,
$$ \log \mu_{ij} = \alpha_i + \beta_j + \gamma_{i1} \delta_{j1} + \gamma_{i2} \delta_{j2} . $$
In the gnm
package, these models may be fit using the Mult()
to specify the multiplicative term, and instances()
to specify several
such terms.
Example:
For the Mental
data, we fit the RC(1) and RC(2) models, and compare
these with the independence model.
RC1 <- gnm(Freq ~ mental + ses + Mult(mental,ses), data=Mental, family=poisson, verbose=FALSE) RC2 <- gnm(Freq ~ mental+ses + instances(Mult(mental,ses),2), data=Mental, family=poisson, verbose=FALSE) anova(indep, RC1, RC2, test="Chisq")
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.