Man pages for KWB-R/kwb.wtaq
Interface to WTAQ Drawdown Model (http://water.usgs.gov/ogw/wtaq/)
| checkModelFit | Calibration of aquifer parameter "hkr" |
| drawdowns | Example data of measured drawdowns in a drinking water well... |
| fitnessAquifer | fitnessAquifer |
| modelFitness | modelFitness |
| modelFitnessAggregated | modelFitnessAggregated |
| owConfigurationToWtConfiguration | WTAQ configuration from Optiwells configuration |
| owConfigure | Definition of an Optiwells well field configuration |
| owConfigureWell | Configure well(s) for Optiwells configuration |
| owGetDrawdowns | Drawdowns for Optiwells configuration and pump discharges |
| owPlotConfiguration | Plot Optiwells configuration |
| owPlotDrawdowns | plot drawdown (under construction!) |
| owRandomConfiguration | Random Optiwells well field configuration |
| owRandomWellfield | Generation of a random wellfield |
| owSuperposeDrawdowns | superpose drawdowns |
| owWellDistances | Distances between wells |
| print.wtaqConfiguration | Print WTAQ configuration |
| wtCalibrate | Simple calibration procedure |
| wtCheckConfiguration | check WTAQ configuration |
| wtConfigurationExample2 | WTAQ configuration representing WTAQ example 2 |
| wtConfigurationExample3 | WTAQ configuration representing WTAQ example 3 |
| wtConfigurationToOwConfiguration | wtConfigurationToOwConfiguration |
| wtConfigure | Define parameter values for WTAQ model run |
| wtConfigureAquifer | Aquifer parameter values |
| wtConfiguredDistances | distances of observation wells |
| wtConfigureDrainage | Drainage parameter values |
| wtConfiguredWellnames | wtConfiguredWellnames |
| wtConfigureGeneral | General parameter values |
| wtConfigureObservationWell | Observation well parameter values |
| wtConfigurePumpwell | Pumped well parameter values |
| wtConfigureSolution | Solver-related parameter values |
| wtConfigureTimes | Simulation time parameter values |
| wtDefaultConfiguration | Default WTAQ configuration |
| wtDefaultConfigurationSolution | default WTAQ solver configuration |
| wtInputFileLines | text lines for WTAQ input file |
| wtPlotConfiguration | plot wellfield profile |
| wtPlotResult | Plot WTAQ results |
| wtReadInputFile | Read WTAQ configuration from input file |
| wtReadPlotFile | Read WTAQ plot file |
| wtRepairConfiguration | repair configuration |
| wtRunConfiguration | Run WTAQ with given configuration |
| wtRunInputFile | Run WTAQ with given input file |
| wtSetParameter | set parameter in WTAQ configuration |
| wtSetParameters | set parameters in WTAQ configuration |
