R/spJitter.R
In Laboratorio-de-Pedometria/spsann-package: Optimization of Spatial Samples via Simulated Annealing
#' Random perturbation of spatial points
#'
#' Randomly perturb (\sQuote{jitter}) the coordinates of spatial points.
#'
#' @template spJitter_doc
#'
#' @param points Data frame or matrix with three columns in the following order: `[, "id"]` the row indexes
#' of `candi` that correspond to each point, `[, "x"]` the projected x-coordinates, and `[, "y"]` the
#' projected y-coordinates. Note that `points` must be a subset of `candi`.
#'
#' @param candi Data frame or matrix with the candidate locations for the jittered points. `candi` must have
#' two columns in the following order: `[, "x"]` the projected x-coordinates, and `[, "y"]` the projected
#' y-coordinates.
#'
#' @param x.max,x.min,y.max,y.min Numeric value defining the minimum and maximum quantity of random noise to
#' be added to the projected x- and y-coordinates. The minimum quantity should be equal to, at least, the
#' minimum distance between two neighbouring candidate points. The units are the same as of the projected
#' x- and y-coordinates. If missing, they are estimated from `candi`.
#'
#' @param cellsize Vector with two positive numeric values defining the spacing in the x- and y-coordinates
#' between the candidate locations in `candi`, i.e. the grid resolution. A single value can be used if the
#' spacing in the x- and y-coordinates is the same. If `cellsize = 0` then a finite set of candidate locations
#' is used (See Details).
#'
#' @param which.point Integer values defining which point should be perturbed.
#'
#' @param verbose (Optional) Logical for printing messages about the progress of the optimization. Defaults to
#' `verbose = FALSE`.
#'
#' @return
#' A matrix with the jittered projected coordinates of the points.
#'
#' @references
#' Edzer Pebesma, Jon Skoien with contributions from Olivier Baume, A. Chorti, D.T. Hristopulos, S.J. Melles
#' and G. Spiliopoulos (2013). _intamapInteractive: procedures for automated interpolation - methods
#' only to be used interactively, not included in `intamap` package._ R package version 1.1-10.
#'
#' van Groenigen, J.-W. _Constrained optimization of spatial sampling: a geostatistical approach._
#' Wageningen: Wageningen University, p. 148, 1999.
#'
#' Walvoort, D. J. J.; Brus, D. J.; de Gruijter, J. J. An R package for spatial coverage sampling and random
#' sampling from compact geographical strata by k-means. _Computers & Geosciences_. v. 36, p. 1261-1267,
#' 2010.
#'
#' @author
#' Alessandro Samuel-Rosa \email{alessandrosamuelrosa@@gmail.com}
#'
#' @seealso \code{ssaOptim}, \code{\link[sp]{zerodist}}, \code{\link[base]{jitter}},
#' \code{[jitter2d](https://CRAN.R-project.org/package=geoR)}.
#' @concept jitter perturb
#' @export
#' @examples
#' require(sp)
#' data(meuse.grid)
#' meuse.grid <- as.matrix(meuse.grid[, 1:2])
#' meuse.grid <- matrix(cbind(1:dim(meuse.grid)[1], meuse.grid), ncol = 3)
#' pts1 <- sample(c(1:dim(meuse.grid)[1]), 155)
#' pts2 <- meuse.grid[pts1, ]
#' pts3 <- spJitter(points = pts2, candi = meuse.grid, x.min = 40,
#' x.max = 100, y.min = 40, y.max = 100,
#' which.point = 10, cellsize = 40)
#' plot(meuse.grid[, 2:3], asp = 1, pch = 15, col = "gray")
#' points(pts2[, 2:3], col = "red", cex = 0.5)
#' points(pts3[, 2:3], pch = 19, col = "blue", cex = 0.5)
#'
#' #' Cluster of points
#' pts1 <- c(1:55)
#' pts2 <- meuse.grid[pts1, ]
#' pts3 <- spJitter(points = pts2, candi = meuse.grid, x.min = 40,
#' x.max = 80, y.min = 40, y.max = 80,
#' which.point = 1, cellsize = 40)
#' plot(meuse.grid[, 2:3], asp = 1, pch = 15, col = "gray")
#' points(pts2[, 2:3], col = "red", cex = 0.5)
#' points(pts3[, 2:3], pch = 19, col = "blue", cex = 0.5)
# FUNCTION ####################################################################################################
spJitter <-
function (points, candi, x.max, x.min, y.max, y.min, which.point, cellsize, verbose = FALSE) {
# If a single value has been passed to cellsize it means that candidate locations (grid cells) are
# square-shaped.
if (length(cellsize) == 1) {
cellsize <- rep(cellsize, 2)
}
# Save point being perturbed
pt0 <- points[which.point, ]
# Get candidate locations using Cpp
# Returns a vector with the ID of the candidate locations in a neighbourhood defined by x.max, y.max, x.min
# and y.min.
pt1 <- .spJitterCpp(x = points[, 2:3], y = candi[, 2:3], xmax = x.max, xmin = x.min, ymax = y.max,
ymin = y.min, idx = which.point)
pt1 <- pt1[pt1 != 0]
# Finite of infinite set of candidate locations?
if (all(cellsize == 0)) {
# When using a finite set of candidate locations (cellsize = 0) it is necessary to check for candidate
# locations that have already been included in the sample. If there are any, they need to be discarded
# from the set of candidate locations.
pt1 <- pt1[!pt1 %in% points[, 1]]
if (length(pt1) == 0) {
# If there is no candidate location left in the neighbourhood, we keep the sample point in its
# original location
pt2 <- pt0
if (verbose) {
m <- paste('no candidate location left in the neighbourhood of sample ', pt0[1],
'...\nreturnig to original location', sep = '')
message(m)
}
} else {
# Ramdomly choose one single candidate location and get its coordinates from candi
pt2 <- candi[sample(pt1, 1), ]
}
} else {
# Ramdomly choose one single candidate location and get its coordinates from candi
pt2 <- candi[sample(pt1, 1), ]
# Compute the new x- and y-coordinates
pt2[-1] <- pt2[-1] + stats::runif(n = 2, min = -0.5, max = 0.5) * cellsize
}
# Output
points[which.point, ] <- pt2
return (points)
}
# spJitterFinite ###############################################################
# spJitterFinite <-
# function (points, candi, x.max, x.min, y.max, y.min, which.point) {
#
# # Get candidate locations using Cpp
# pt1 <- .spJitterCpp(points[, 2:3], candi[, 2:3], x.max, x.min, y.max,
# y.min, which.point)
#
# # Get candidate locations
# pt1 <- pt1[pt1 != 0]
#
# # Select one candidate location
# pt2 <- sample(pt1, 1)
#
# # Check if it already is in the sample (duplicated)
# dup <- duplicated(c(pt2, points[, 1]))
#
# # If it already exists, we try to find another point as many times as
# # there are point in the sample. The reason for this choice is that the
# # more points we have, the more likely it is that the candidate point
# # already is included in the sample.
# if (any(dup)) {
# ntry <- 0
# while (any(dup)) {
# pt2 <- sample(pt1, 1)
# dup <- duplicated(c(pt2, points[, 1]))
# ntry <- ntry + 1
# if (ntry == length(nrow(points))) {
# pt2 <- which.point
# break
# }
# }
# }
#
# res <- points
# res[which.point, ] <- candi[pt2, ]
# return (res)
# }
# OLD spJitterFinite FUNCTION ##################################################
# parameters of the old implementation
# \item{where}{An object of class SpatialPolygons defining the spatial domain
# to which the perturbed points should be constrained. Used only when
# \code{finite = FALSE}. See \sQuote{Details} for more information.}
# \item{finite}{Logical value defining if the spatial domain is finite or
# infinite. This is a mandatory argument. See \sQuote{Details} for more
# information.}
# \item{x.coord}{List with two sub-arguments defining how the x coordinate
# should be perturbed. \code{min} and \code{max} define the minimum and maximum
# quantity of random noise to be added to the x coordinate. If
# \code{finite = TRUE}, then \code{min} should be equal to, at least, the
# minimum distance between two neighboring candidate locations. If
# \code{finite = FALSE}, then \code{min} should be equal to, at least, the
# value passed to the argument \code{zero}. This is a mandatory argument. See
# \sQuote{Details} for more information.}
# \item{y.coord}{The same as for \code{x.coord}.}
# \item{zero}{Numeric value defining the distance less than or equal to which
# two points are considered to have zero distance. See more information at
# \code{\link[sp]{zerodist}}. Used only when \code{finite = FALSE}. Defaults
# to \code{zero = 1}.}
# \item{iterations}{Integer value defining the maximum number of iterations
# that should be used when constraining the perturbed points to the spatial
# domain defined by the argument \code{where}. Defaults to
# \code{iterations = 10000}. Used only when \code{finite = FALSE}. See
# \sQuote{Details} for more information.}
# \item{verbose}{Logical for printing details about the success of the
# algorithm when constraining the perturbed points to the spatial domain
# defined by the argument \code{where}. Used only when
# \code{finite = FALSE}.}
# \item{size}{Integer value defining the number of points that should be
# perturbed at each iteration of the simulated annealing exercise
# (\code{spSANN}). Defaults to \code{size = 1}. See \code{spSANN} for more
# information.}
# \item{size.factor}{Numeric value defining the factor by which the number of
# points that should be perturbed at each iteration of the simulated annealing
# exercise (\code{spSANN}) is decreased. Used only when \code{size} is larger
# than 1. See \code{spSANN} for more information.}
# spJitterFinite <-
# function (points, candi, x.max, x.min, y.max, y.min, which.pts) {
# d_x <- x.max + x.min
# d_y <- y.max + y.min
# pt0 <- points[which.pts, ]
# d_x <- unlist(c(pt0[1] - d_x, pt0[1] + d_x))
# d_y <- unlist(c(pt0[2] - d_y, pt0[2] + d_y))
# pt1 <- which(candi[, 1] >= d_x[1] & candi[, 1] <= d_x[2] &
# candi[, 2] >= d_y[1] & candi[, 2] <= d_y[2])
# pt2 <- candi[sample(pt1, 1), ]
# dup <- duplicated(rbind(pt2, points))
# if (any(dup)) {
# while (any(dup)) {
# pt2 <- candi[sample(pt1, 1), ]
# dup <- duplicated(rbind(pt2, points))
# }
# }
# res <- points
# res[which.pts, ] <- pt2
# return (res)
# }
# OLD spJitter FUNCTION ########################################################
# spJitter <-
# function (obj, candi = NULL, where = NULL, which = NULL, finite = NULL,
# x.coord = list(min = NULL, max = NULL),
# y.coord = list(min = NULL, max = NULL),
# zero = 1, iterations = 10000, verbose = TRUE) {
# if (is.null(finite)) {
# stop("'finite' is a mandatory argument")
# }
# if (missing(obj)) {
# stop ("'obj' is a mandatory argument")
# }
# if (!is.list(x.coord) || length(x.coord) != 2) {
# stop ("'x.coord' should be a list with 2 subarguments")
# } else {
# if (is.null(x.coord$min) || is.null(x.coord$max)) {
# stop ("'min' and 'max' are mandatory subarguments for 'x.coord")
# }
# }
# if (!is.list(y.coord) || length(y.coord) != 2) {
# stop ("'y.coord' should be a list with 2 subarguments")
# } else {
# if (is.null(y.coord$min) || is.null(y.coord$max)) {
# stop ("'min' and 'max' are mandatory subarguments for 'y.coord")
# }
# }
# if (finite) {
# if (inherits(obj, "SpatialPoints")) {
# stop ("'obj' should be a vector of indexes")
# }
# if (is.null(candi)) {
# stop ("'candi' is a mandatory argument")
# }
# if (!inherits(candi, what = "data.frame")) {
# stop ("'candi' should be a data.frame")
# } else {
# if (dim(candi)[2] != 2 ||
# any(colnames(candi) != c("x", "y"))) {
# stop ("'candi' should have 2 columns named 'x' and 'y'")
# }
# }
# if (unique(which == "all")) {
# stop ("this option is not functional yet")
# #res <- candi[sample(c(1:length(candi)), length(obj)), ]
# } else {
# if (length(which) > 1) {
# stop ("this option is not functional yet")
# #pt0 <- coordinates(obj[which, ])
# #res <- list()
# #for (i in 1:length(which)) {
# # cand <- coordinates(candi)
# # d_x <- x.coord$max + x.coord$min
# # d_y <- y.coord$max + y.coord$min
# # d_x <- c(pt0[i, "x"] - d_x, pt0[i, "x"] + d_x)
# # d_y <- c(pt0[i, "y"] - d_y, pt0[i, "y"] + d_y)
# # cand <- which(cand[, "x"] >= d_x[1] & cand[, "x"] <= d_x[2] &
# # cand[, "y"] >= d_y[1] & cand[, "y"] <= d_y[2])
# # res[i] <- candi[sample(cand, 1), ]
# #}
# #res <- data.frame(t(sapply(res, coordinates)))
# #colnames(res) <- c("x", "y")
# #coordinates(res) <- ~ x + y
# #proj4string(res) <- proj4string(obj)
# #res <- rbind(obj[-which, ], res)
# } else {
# res <- .spJitterFiniteOne(obj = obj, candi = candi,
# x.max = x.coord$max, x.min = x.coord$min,
# y.max = y.coord$max, y.min = y.coord$min,
# which = which)
# }
# }
# return (res)
# } else {
# if (is.null(where)) {
# stop ("'where' is a mandatory argument")
# } else {
# if (!inherits(where, what = "SpatialPolygons")) {
# stop ("'where' should be of class SpatialPolygons")
# } else {
# where <- as(where, "SpatialPolygons")
# }
# }
# if (!is.numeric(zero)) {
# stop ("'zero' should be a numeric value")
# }
# if (!is.numeric(iterations)) {
# stop ("'iterations' should be a numeric value")
# }
# if (!inherits(obj, "SpatialPoints") || is.na(proj4string(obj)) ||
# !is.projected(obj)) {
# stop ("'obj' should be of class SpatialPoints with projected CRS")
# } else {
# obj <- as(obj, "SpatialPoints")
# colnames(obj@coords) <- c("x", "y")
# rownames(obj@bbox) <- c("x", "y")
# }
# if (unique(which == "all")) {
# x0 <- coordinates(obj)[, "x"]
# y0 <- coordinates(obj)[, "y"]
# }
# if (is.numeric(which)) {
# x0 <- coordinates(obj)[which, "x"]
# y0 <- coordinates(obj)[which, "y"]
# }
# x1 <- jitter(x = x0, amount = x.coord$max)
# dx <- abs(x0 - x1)
# dx <- which(dx < x.coord$min)
# x1[dx] <- x0[dx] + sign(x0[dx] - x1[dx]) * x.coord$min
# y1 <- jitter(x = y0, amount = y.coord$max)
# dy <- abs(y0 - y1)
# dy <- which(dy < y.coord$min)
# y1[dy] <- y0[dy] + sign(y0[dy] - y1[dy]) * y.coord$min
# res <- data.frame(x = x1, y = y1)
# coordinates(res) <- ~ x + y
# proj4string(res) <- proj4string(obj)
# if (is.numeric(which)) {
# res <- rbind(obj[-which, ], res)
# }
# if (!is.null(where)) {
# out <- which(gContains(where, res, byid = TRUE) == FALSE)
# n_out <- length(out)
# n_iter <- 1
# while (n_out >= 1) {
# res_out <- obj[out, ]
# res <- res[-out, ]
# x0 <- coordinates(res_out)[, "x"]
# y0 <- coordinates(res_out)[, "y"]
# x1 <- jitter(x = x0, amount = x.coord$max)
# dx <- abs(x0 - x1)
# dx <- which(dx < x.coord$min)
# x1[dx] <- x0[dx] + sign(x0[dx] - x1[dx]) * x.coord$min
# y1 <- jitter(x = y0, amount = y.coord$max)
# dy <- abs(y0 - y1)
# dy <- which(dy < y.coord$min)
# y1[dy] <- y0[dy] + sign(y0[dy] - y1[dy]) * y.coord$min
# res_out <- data.frame(x = x1, y = y1)
# coordinates(res_out) <- ~ x + y
# proj4string(res_out) <- proj4string(res)
# res <- rbind(res, res_out)
# while(length(zerodist(res, zero = zero))[1] > 0){
# dup <- unique(c(zerodist(res, zero = zero)))
# res_dup <- res[dup, ]
# res <- res[-dup]
# x0 <- coordinates(res_dup)[, "x"]
# y0 <- coordinates(res_dup)[, "y"]
# x1 <- jitter(x = x0, amount = x.coord$min)
# y1 <- jitter(x = y0, amount = y.coord$min)
# res_dup <- data.frame(x = x1, y = y1)
# coordinates(res_dup) <- ~ x + y
# proj4string(res_dup) <- proj4string(res)
# res <- rbind(res, res_dup)
# }
# out <- which(gContains(where, res, byid = TRUE) == FALSE)
# n_out <- length(out)
# n_iter <- n_iter + 1
# if (n_iter == iterations) {
# break
# }
# }
# }
# if (!is.null(where)) {
# if (n_out >= 1) {
# message(paste("spJitter DID NOT converge after ", n_iter,
# " iterations", sep = ""))
# if (n_out > 1) {
# stop(paste("there are ", n_out,
# " points outside the spatial domain", sep = ""))
# } else {
# stop(paste("there is ", n_out,
# " point outside the spatial domain", sep = ""))
# }
# } else {
# if (verbose) {
# message(paste("spJitter converged after ", n_iter,
# " iterations", sep = ""))
# }
# }
# }
# return (res)
# }
# }
# End!
Laboratorio-de-Pedometria/spsann-package documentation built on Nov. 2, 2023, 3:14 p.m.
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
#' Random perturbation of spatial points
#'
#' Randomly perturb (\sQuote{jitter}) the coordinates of spatial points.
#'
#' @template spJitter_doc
#'
#' @param points Data frame or matrix with three columns in the following order: `[, "id"]` the row indexes
#' of `candi` that correspond to each point, `[, "x"]` the projected x-coordinates, and `[, "y"]` the
#' projected y-coordinates. Note that `points` must be a subset of `candi`.
#'
#' @param candi Data frame or matrix with the candidate locations for the jittered points. `candi` must have
#' two columns in the following order: `[, "x"]` the projected x-coordinates, and `[, "y"]` the projected
#' y-coordinates.
#'
#' @param x.max,x.min,y.max,y.min Numeric value defining the minimum and maximum quantity of random noise to
#' be added to the projected x- and y-coordinates. The minimum quantity should be equal to, at least, the
#' minimum distance between two neighbouring candidate points. The units are the same as of the projected
#' x- and y-coordinates. If missing, they are estimated from `candi`.
#'
#' @param cellsize Vector with two positive numeric values defining the spacing in the x- and y-coordinates
#' between the candidate locations in `candi`, i.e. the grid resolution. A single value can be used if the
#' spacing in the x- and y-coordinates is the same. If `cellsize = 0` then a finite set of candidate locations
#' is used (See Details).
#'
#' @param which.point Integer values defining which point should be perturbed.
#'
#' @param verbose (Optional) Logical for printing messages about the progress of the optimization. Defaults to
#' `verbose = FALSE`.
#'
#' @return
#' A matrix with the jittered projected coordinates of the points.
#'
#' @references
#' Edzer Pebesma, Jon Skoien with contributions from Olivier Baume, A. Chorti, D.T. Hristopulos, S.J. Melles
#' and G. Spiliopoulos (2013). _intamapInteractive: procedures for automated interpolation - methods
#' only to be used interactively, not included in `intamap` package._ R package version 1.1-10.
#'
#' van Groenigen, J.-W. _Constrained optimization of spatial sampling: a geostatistical approach._
#' Wageningen: Wageningen University, p. 148, 1999.
#'
#' Walvoort, D. J. J.; Brus, D. J.; de Gruijter, J. J. An R package for spatial coverage sampling and random
#' sampling from compact geographical strata by k-means. _Computers & Geosciences_. v. 36, p. 1261-1267,
#' 2010.
#'
#' @author
#' Alessandro Samuel-Rosa \email{alessandrosamuelrosa@@gmail.com}
#'
#' @seealso \code{ssaOptim}, \code{\link[sp]{zerodist}}, \code{\link[base]{jitter}},
#' \code{[jitter2d](https://CRAN.R-project.org/package=geoR)}.
#' @concept jitter perturb
#' @export
#' @examples
#' require(sp)
#' data(meuse.grid)
#' meuse.grid <- as.matrix(meuse.grid[, 1:2])
#' meuse.grid <- matrix(cbind(1:dim(meuse.grid)[1], meuse.grid), ncol = 3)
#' pts1 <- sample(c(1:dim(meuse.grid)[1]), 155)
#' pts2 <- meuse.grid[pts1, ]
#' pts3 <- spJitter(points = pts2, candi = meuse.grid, x.min = 40,
#' x.max = 100, y.min = 40, y.max = 100,
#' which.point = 10, cellsize = 40)
#' plot(meuse.grid[, 2:3], asp = 1, pch = 15, col = "gray")
#' points(pts2[, 2:3], col = "red", cex = 0.5)
#' points(pts3[, 2:3], pch = 19, col = "blue", cex = 0.5)
#'
#' #' Cluster of points
#' pts1 <- c(1:55)
#' pts2 <- meuse.grid[pts1, ]
#' pts3 <- spJitter(points = pts2, candi = meuse.grid, x.min = 40,
#' x.max = 80, y.min = 40, y.max = 80,
#' which.point = 1, cellsize = 40)
#' plot(meuse.grid[, 2:3], asp = 1, pch = 15, col = "gray")
#' points(pts2[, 2:3], col = "red", cex = 0.5)
#' points(pts3[, 2:3], pch = 19, col = "blue", cex = 0.5)
# FUNCTION ####################################################################################################
spJitter <-
function (points, candi, x.max, x.min, y.max, y.min, which.point, cellsize, verbose = FALSE) {
# If a single value has been passed to cellsize it means that candidate locations (grid cells) are
# square-shaped.
if (length(cellsize) == 1) {
cellsize <- rep(cellsize, 2)
}
# Save point being perturbed
pt0 <- points[which.point, ]
# Get candidate locations using Cpp
# Returns a vector with the ID of the candidate locations in a neighbourhood defined by x.max, y.max, x.min
# and y.min.
pt1 <- .spJitterCpp(x = points[, 2:3], y = candi[, 2:3], xmax = x.max, xmin = x.min, ymax = y.max,
ymin = y.min, idx = which.point)
pt1 <- pt1[pt1 != 0]
# Finite of infinite set of candidate locations?
if (all(cellsize == 0)) {
# When using a finite set of candidate locations (cellsize = 0) it is necessary to check for candidate
# locations that have already been included in the sample. If there are any, they need to be discarded
# from the set of candidate locations.
pt1 <- pt1[!pt1 %in% points[, 1]]
if (length(pt1) == 0) {
# If there is no candidate location left in the neighbourhood, we keep the sample point in its
# original location
pt2 <- pt0
if (verbose) {
m <- paste('no candidate location left in the neighbourhood of sample ', pt0[1],
'...\nreturnig to original location', sep = '')
message(m)
}
} else {
# Ramdomly choose one single candidate location and get its coordinates from candi
pt2 <- candi[sample(pt1, 1), ]
}
} else {
# Ramdomly choose one single candidate location and get its coordinates from candi
pt2 <- candi[sample(pt1, 1), ]
# Compute the new x- and y-coordinates
pt2[-1] <- pt2[-1] + stats::runif(n = 2, min = -0.5, max = 0.5) * cellsize
}
# Output
points[which.point, ] <- pt2
return (points)
}
# spJitterFinite ###############################################################
# spJitterFinite <-
# function (points, candi, x.max, x.min, y.max, y.min, which.point) {
#
# # Get candidate locations using Cpp
# pt1 <- .spJitterCpp(points[, 2:3], candi[, 2:3], x.max, x.min, y.max,
# y.min, which.point)
#
# # Get candidate locations
# pt1 <- pt1[pt1 != 0]
#
# # Select one candidate location
# pt2 <- sample(pt1, 1)
#
# # Check if it already is in the sample (duplicated)
# dup <- duplicated(c(pt2, points[, 1]))
#
# # If it already exists, we try to find another point as many times as
# # there are point in the sample. The reason for this choice is that the
# # more points we have, the more likely it is that the candidate point
# # already is included in the sample.
# if (any(dup)) {
# ntry <- 0
# while (any(dup)) {
# pt2 <- sample(pt1, 1)
# dup <- duplicated(c(pt2, points[, 1]))
# ntry <- ntry + 1
# if (ntry == length(nrow(points))) {
# pt2 <- which.point
# break
# }
# }
# }
#
# res <- points
# res[which.point, ] <- candi[pt2, ]
# return (res)
# }
# OLD spJitterFinite FUNCTION ##################################################
# parameters of the old implementation
# \item{where}{An object of class SpatialPolygons defining the spatial domain
# to which the perturbed points should be constrained. Used only when
# \code{finite = FALSE}. See \sQuote{Details} for more information.}
# \item{finite}{Logical value defining if the spatial domain is finite or
# infinite. This is a mandatory argument. See \sQuote{Details} for more
# information.}
# \item{x.coord}{List with two sub-arguments defining how the x coordinate
# should be perturbed. \code{min} and \code{max} define the minimum and maximum
# quantity of random noise to be added to the x coordinate. If
# \code{finite = TRUE}, then \code{min} should be equal to, at least, the
# minimum distance between two neighboring candidate locations. If
# \code{finite = FALSE}, then \code{min} should be equal to, at least, the
# value passed to the argument \code{zero}. This is a mandatory argument. See
# \sQuote{Details} for more information.}
# \item{y.coord}{The same as for \code{x.coord}.}
# \item{zero}{Numeric value defining the distance less than or equal to which
# two points are considered to have zero distance. See more information at
# \code{\link[sp]{zerodist}}. Used only when \code{finite = FALSE}. Defaults
# to \code{zero = 1}.}
# \item{iterations}{Integer value defining the maximum number of iterations
# that should be used when constraining the perturbed points to the spatial
# domain defined by the argument \code{where}. Defaults to
# \code{iterations = 10000}. Used only when \code{finite = FALSE}. See
# \sQuote{Details} for more information.}
# \item{verbose}{Logical for printing details about the success of the
# algorithm when constraining the perturbed points to the spatial domain
# defined by the argument \code{where}. Used only when
# \code{finite = FALSE}.}
# \item{size}{Integer value defining the number of points that should be
# perturbed at each iteration of the simulated annealing exercise
# (\code{spSANN}). Defaults to \code{size = 1}. See \code{spSANN} for more
# information.}
# \item{size.factor}{Numeric value defining the factor by which the number of
# points that should be perturbed at each iteration of the simulated annealing
# exercise (\code{spSANN}) is decreased. Used only when \code{size} is larger
# than 1. See \code{spSANN} for more information.}
# spJitterFinite <-
# function (points, candi, x.max, x.min, y.max, y.min, which.pts) {
# d_x <- x.max + x.min
# d_y <- y.max + y.min
# pt0 <- points[which.pts, ]
# d_x <- unlist(c(pt0[1] - d_x, pt0[1] + d_x))
# d_y <- unlist(c(pt0[2] - d_y, pt0[2] + d_y))
# pt1 <- which(candi[, 1] >= d_x[1] & candi[, 1] <= d_x[2] &
# candi[, 2] >= d_y[1] & candi[, 2] <= d_y[2])
# pt2 <- candi[sample(pt1, 1), ]
# dup <- duplicated(rbind(pt2, points))
# if (any(dup)) {
# while (any(dup)) {
# pt2 <- candi[sample(pt1, 1), ]
# dup <- duplicated(rbind(pt2, points))
# }
# }
# res <- points
# res[which.pts, ] <- pt2
# return (res)
# }
# OLD spJitter FUNCTION ########################################################
# spJitter <-
# function (obj, candi = NULL, where = NULL, which = NULL, finite = NULL,
# x.coord = list(min = NULL, max = NULL),
# y.coord = list(min = NULL, max = NULL),
# zero = 1, iterations = 10000, verbose = TRUE) {
# if (is.null(finite)) {
# stop("'finite' is a mandatory argument")
# }
# if (missing(obj)) {
# stop ("'obj' is a mandatory argument")
# }
# if (!is.list(x.coord) || length(x.coord) != 2) {
# stop ("'x.coord' should be a list with 2 subarguments")
# } else {
# if (is.null(x.coord$min) || is.null(x.coord$max)) {
# stop ("'min' and 'max' are mandatory subarguments for 'x.coord")
# }
# }
# if (!is.list(y.coord) || length(y.coord) != 2) {
# stop ("'y.coord' should be a list with 2 subarguments")
# } else {
# if (is.null(y.coord$min) || is.null(y.coord$max)) {
# stop ("'min' and 'max' are mandatory subarguments for 'y.coord")
# }
# }
# if (finite) {
# if (inherits(obj, "SpatialPoints")) {
# stop ("'obj' should be a vector of indexes")
# }
# if (is.null(candi)) {
# stop ("'candi' is a mandatory argument")
# }
# if (!inherits(candi, what = "data.frame")) {
# stop ("'candi' should be a data.frame")
# } else {
# if (dim(candi)[2] != 2 ||
# any(colnames(candi) != c("x", "y"))) {
# stop ("'candi' should have 2 columns named 'x' and 'y'")
# }
# }
# if (unique(which == "all")) {
# stop ("this option is not functional yet")
# #res <- candi[sample(c(1:length(candi)), length(obj)), ]
# } else {
# if (length(which) > 1) {
# stop ("this option is not functional yet")
# #pt0 <- coordinates(obj[which, ])
# #res <- list()
# #for (i in 1:length(which)) {
# # cand <- coordinates(candi)
# # d_x <- x.coord$max + x.coord$min
# # d_y <- y.coord$max + y.coord$min
# # d_x <- c(pt0[i, "x"] - d_x, pt0[i, "x"] + d_x)
# # d_y <- c(pt0[i, "y"] - d_y, pt0[i, "y"] + d_y)
# # cand <- which(cand[, "x"] >= d_x[1] & cand[, "x"] <= d_x[2] &
# # cand[, "y"] >= d_y[1] & cand[, "y"] <= d_y[2])
# # res[i] <- candi[sample(cand, 1), ]
# #}
# #res <- data.frame(t(sapply(res, coordinates)))
# #colnames(res) <- c("x", "y")
# #coordinates(res) <- ~ x + y
# #proj4string(res) <- proj4string(obj)
# #res <- rbind(obj[-which, ], res)
# } else {
# res <- .spJitterFiniteOne(obj = obj, candi = candi,
# x.max = x.coord$max, x.min = x.coord$min,
# y.max = y.coord$max, y.min = y.coord$min,
# which = which)
# }
# }
# return (res)
# } else {
# if (is.null(where)) {
# stop ("'where' is a mandatory argument")
# } else {
# if (!inherits(where, what = "SpatialPolygons")) {
# stop ("'where' should be of class SpatialPolygons")
# } else {
# where <- as(where, "SpatialPolygons")
# }
# }
# if (!is.numeric(zero)) {
# stop ("'zero' should be a numeric value")
# }
# if (!is.numeric(iterations)) {
# stop ("'iterations' should be a numeric value")
# }
# if (!inherits(obj, "SpatialPoints") || is.na(proj4string(obj)) ||
# !is.projected(obj)) {
# stop ("'obj' should be of class SpatialPoints with projected CRS")
# } else {
# obj <- as(obj, "SpatialPoints")
# colnames(obj@coords) <- c("x", "y")
# rownames(obj@bbox) <- c("x", "y")
# }
# if (unique(which == "all")) {
# x0 <- coordinates(obj)[, "x"]
# y0 <- coordinates(obj)[, "y"]
# }
# if (is.numeric(which)) {
# x0 <- coordinates(obj)[which, "x"]
# y0 <- coordinates(obj)[which, "y"]
# }
# x1 <- jitter(x = x0, amount = x.coord$max)
# dx <- abs(x0 - x1)
# dx <- which(dx < x.coord$min)
# x1[dx] <- x0[dx] + sign(x0[dx] - x1[dx]) * x.coord$min
# y1 <- jitter(x = y0, amount = y.coord$max)
# dy <- abs(y0 - y1)
# dy <- which(dy < y.coord$min)
# y1[dy] <- y0[dy] + sign(y0[dy] - y1[dy]) * y.coord$min
# res <- data.frame(x = x1, y = y1)
# coordinates(res) <- ~ x + y
# proj4string(res) <- proj4string(obj)
# if (is.numeric(which)) {
# res <- rbind(obj[-which, ], res)
# }
# if (!is.null(where)) {
# out <- which(gContains(where, res, byid = TRUE) == FALSE)
# n_out <- length(out)
# n_iter <- 1
# while (n_out >= 1) {
# res_out <- obj[out, ]
# res <- res[-out, ]
# x0 <- coordinates(res_out)[, "x"]
# y0 <- coordinates(res_out)[, "y"]
# x1 <- jitter(x = x0, amount = x.coord$max)
# dx <- abs(x0 - x1)
# dx <- which(dx < x.coord$min)
# x1[dx] <- x0[dx] + sign(x0[dx] - x1[dx]) * x.coord$min
# y1 <- jitter(x = y0, amount = y.coord$max)
# dy <- abs(y0 - y1)
# dy <- which(dy < y.coord$min)
# y1[dy] <- y0[dy] + sign(y0[dy] - y1[dy]) * y.coord$min
# res_out <- data.frame(x = x1, y = y1)
# coordinates(res_out) <- ~ x + y
# proj4string(res_out) <- proj4string(res)
# res <- rbind(res, res_out)
# while(length(zerodist(res, zero = zero))[1] > 0){
# dup <- unique(c(zerodist(res, zero = zero)))
# res_dup <- res[dup, ]
# res <- res[-dup]
# x0 <- coordinates(res_dup)[, "x"]
# y0 <- coordinates(res_dup)[, "y"]
# x1 <- jitter(x = x0, amount = x.coord$min)
# y1 <- jitter(x = y0, amount = y.coord$min)
# res_dup <- data.frame(x = x1, y = y1)
# coordinates(res_dup) <- ~ x + y
# proj4string(res_dup) <- proj4string(res)
# res <- rbind(res, res_dup)
# }
# out <- which(gContains(where, res, byid = TRUE) == FALSE)
# n_out <- length(out)
# n_iter <- n_iter + 1
# if (n_iter == iterations) {
# break
# }
# }
# }
# if (!is.null(where)) {
# if (n_out >= 1) {
# message(paste("spJitter DID NOT converge after ", n_iter,
# " iterations", sep = ""))
# if (n_out > 1) {
# stop(paste("there are ", n_out,
# " points outside the spatial domain", sep = ""))
# } else {
# stop(paste("there is ", n_out,
# " point outside the spatial domain", sep = ""))
# }
# } else {
# if (verbose) {
# message(paste("spJitter converged after ", n_iter,
# " iterations", sep = ""))
# }
# }
# }
# return (res)
# }
# }
# End!
R Package Documentation
Browse R Packages
We want your feedback!
Note that we can't provide technical support on individual packages. You should contact the package authors for that.
Embedding an R snippet on your website
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.