In mnr/rpigpior: Provides R with Access to the Raspberry Pi

knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)

library(rpigpior)

GPIO Pinout

To run the unit tests on this package, you'll need to connect circuits to specific GPIO pins. Here's the pinout...

| Connect to... | Board Pin | Board Pin | ...connects to | |:----------------------:|:---------:|:---------:|:-----------------------:| | bme 280 vcc | 1 | 2 | | | bme 280 SDA | 3 | 4 | | | bme 280 SCL | 5 | 6 | | | | 7 | 8 | | | bme 280 gnd | 9 | 10 | | | rpi_set LED 3 | 11 | 12 | rpi_pwm LED 1 | | | 13 | 14 | | | | 15 | 16 | | | 3.3v to breadboard | 17 | 18 | | | mcp3008 spi0 mosi Din | 19 | 20 | | | mcp3008 spi0 miso Dout | 21 | 22 | mcp3008 spi chip select | | mcp3008 spi0 SCLK | 23 | 24 | | | | 25 | 26 | | | | 26 | 28 | | | | 29 | 30 | | | | 31 | 32 | | | rpi_pwm LED 2 | 33 | 34 | | | | 35 | 36 | | | | 37 | 38 | | | gnd to breadboard | 39 | 40 | rpi_get pushbtn |

mnr/rpigpior documentation built on May 22, 2024, 8:39 p.m.