This function validates and writes CALMET parameters for wind field options and parameters to the working CALMET.INP file.
1 2 3 4 5 6 7 8 9 | calmet_06_mixhgt_temp_precip_params(calmet_inp = "calmet_template.txt",
constb = 1.41, conste = 0.15, constn = 2400, constw = 0.16,
fcoriol = 1e-04, iavezi = 1, mnmdav = 10, hafang = 30, ilevzi = 1,
imixh = 1, threshl = 0.05, threshw = 0.05, itwprog = 0,
iluoc3d = 16, dptmin = 0.001, dzzi = 200, zimin = 50, zimax = 3000,
ziminw = 50, zimaxw = 3000, icoare = 10, dshelf = 0, iwarm = 0,
icool = 0, itprog = 0, irad = 1, tradkm = 500, numts = 5,
iavet = 1, tgdefb = -0.0098, tgdefa = -0.0045, jwat1 = 55,
jwat2 = 55, nflagp = 2, sigmap = 100, cutp = 0.01)
|
calmet_inp |
the absolute path and filename for the working CALMET input file. |
constb |
empirical mixing height constant for the neutral, mechanical equation. |
conste |
empirical mixing height constant for the convective mixing height equation. |
constn |
empirical mixing height constant for the stable mixing height equation. |
constw |
empirical mixing height constant for the overwater mixing height equation. |
fcoriol |
absolute value of the Coriolis parameter. |
iavezi |
conduct spatial averaging of mixing heights? |
mnmdav |
maximum search radius (in grid cell units) for averaging of mixing heights. |
hafang |
half-angle of upwind looking cone for averaging of mixing heights. |
ilevzi |
layer of winds used in upwind averaging of mixing heights. |
imixh |
method for computation of the convective mixing height: (1) Maul-Carson for land and water cells, (-1) Maul-Carson for land and water cells and OCD mixing heights overwater, (2) Batchvarova and Gryning for land and water cells, and (-2) Batchvarova and Gryning for land and water cells and OCD mixing heights overwater. |
threshl |
threshold buoyancy flux required to sustain convective mixing height growth overland. Expressed as a heat flux per meter of boundary layer in units of W/m3. |
threshw |
threshold buoyancy flux required to sustain convective mixing height growth overwater. Expressed as a heat flux per meter of boundary layer in units of W/m3. |
itwprog |
option for overwater lapse rates used in convective mixing height growth: (0) use SEA.DAT lapse rates and deltaT (or assume neutral conditions if missing), (1) use prognostic lapse rates (only if IPROG > 2) and SEA.DAT deltaT (or neutral if missing), (2) use prognostic lapse rates and prognostic delta T (only if IPROG > 12 and 3D.DAT version 2.0 or higher). |
iluoc3d |
land use category for ocean in 3D.DAT datasets. |
dptmin |
minimum potential temperature lapse rate in the stable layer above the current convective mixing height (in units of K/m). |
dzzi |
depth of layer (in meters) above current convective mixing height through which lapse rate is computed. |
zimin |
minimum overland mixing height (in meters). |
zimax |
maximum overland mixing height (in meters). |
ziminw |
minimum overwater mixing height (in meters). |
zimaxw |
maximum overwater mixing height (in meters). |
icoare |
method for computation of overwater surface fluxes: (0) original deltaT method, (10) COARE with no wave parameterization (jwave = 0), (11) COARE with wave option (jwave = 1) and default wave properties, (-11) COARE with wave option (jwave = 1) and observed wave properties (must be in SEA.DAT files), (12) COARE with wave option 2 (Taylor and Yelland) and default wave properties, and (-12) COARE with wave option 2 (Taylor and Yelland) and observed wave properties (must be in SEA.DAT files). |
dshelf |
coastal/shallow water length scale (in kilometers) for modified z0 in shallow water. |
iwarm |
COARE warm layer computation: (0) off, (1) on. |
icool |
COARE cool skin layer computation: (0) off, (1) on. |
itprog |
selection of temperature data from observations or prognostic data: (0) use both surface and upper air stations, (1) use both surface stations and MM5/3D files for upper air data (no upper air observations), (2) MM5/3D files for both the surface and upper air data (no surface or upper air observations). |
irad |
interpolation type: (1) 1/R, (2) 1/R^2. |
tradkm |
radius of influence (in kilometers) for temperature interpolation. |
numts |
maximum number of stations to include in temperature interpolation. |
iavet |
conduct spatial averaging of temperatures? |
tgdefb |
default temperature gradient (in units of K/m) below the mixing height over water. |
tgdefa |
default temperature gradient (in units of K/m) above the mixing height over water. |
jwat1 |
beginning land use category value for temperature interpolation over water. |
jwat2 |
ending land use category value for temperature interpolation over water. |
nflagp |
method of interpolation for precipitation: (1) 1/R, (2) 1/R^2, (3) exp/R^2. |
sigmap |
radius of influence (in kilometers) for interpolation of precipitation. |
cutp |
minimum precipitation rate cutoff (in units of mm/h). |
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.