make.musse: MuSSE: Multi-State Speciation and Extinction
In richfitz/diversitree: Comparative 'Phylogenetic' Analyses of Diversification

make.musse

R Documentation

MuSSE: Multi-State Speciation and Extinction

Description

Prepare to run MuSSE (Multi-State Speciation and Extinction) on a phylogenetic tree and character distribution. This function creates a likelihood function that can be used in maximum likelihood or Bayesian inference.

MuSSE is agnostic as to whether multiple states or multiple traits are modelled (following Pagel 1994). Instead, a transition rate matrix amongst possible trait/state combinations is constructed and the analysis is conducted on this.

The helper function make.musse.multitrait wraps the basic MuSSE model for the case of a combination of several binary traits; its argument handling are a little different; please see the help page for more information.

Usage

make.musse(tree, states, k, sampling.f=NULL, strict=TRUE,
           control=list())
starting.point.musse(tree, k, q.div=5, yule=FALSE)

Arguments

`tree`	An ultrametric bifurcating phylogenetic tree, in `ape` “phylo” format.
`states`	A vector of character states, each of which must be an integer between 1 and `k`. This vector must have names that correspond to the tip labels in the phylogenetic tree (`tree$tip.label`). For tips corresponding to unresolved clades, the state should be `NA`.
`k`	The number of states.
`sampling.f`	Vector of length `k` where `sampling.f[i]` is the proportion of species in state `i` that are present in the phylogeny. A value of `c(0.5, 0.75, 1)` means that half of species in state 1, three quarters of species in state 2, and all species in state 3 are included in the phylogeny. By default all species are assumed to be known
`strict`	The `states` vector is always checked to make sure that the values are integers on `1:k`. If `strict` is `TRUE` (the default), then the additional check is made that every state is present. The likelihood models tend to be poorly behaved where states are missing, but there are cases (missing intermediate states for meristic characters) where allowing such models may be useful.
`control`	List of control parameters for the ODE solver. See details in `make.bisse`.
`q.div`	Ratio of diversification rate to character change rate. Eventually this will be changed to allow for Mk2 to be used for estimating q parameters.
`yule`	Logical: should starting parameters be Yule estimates rather than birth-death estimates?

Details

With more than 9 states, qij can be ambiguous (e.g. is q113 1->13 or 11->3?). To avoid this, the numbers are zero padded (so that the above would be q0113 or q1103 for 1->13 and 11->3 respectively). It might be easier to rename the arguments in practice though.

Author(s)

Richard G. FitzJohn

Examples

## Due to a change in sample() behaviour in newer R it is necessary to
## use an older algorithm to replicate the previous examples
if (getRversion() >= "3.6.0") {
  RNGkind(sample.kind = "Rounding")
}

## 1: BiSSE equivalence
pars <- c(.1, .2, .03, .04, 0.05, 0.1)
set.seed(2)
phy <- tree.musse(pars, 20, x0=1)

## Show that the likelihood functions give the same answers.  Ignore the
## warning when creating the MuSSE function.
lik.b <- make.bisse(phy, phy$tip.state-1)
lik.m <- make.musse(phy, phy$tip.state, 2)
all.equal(lik.b(pars), lik.m(pars), tolerance=1e-7)

## Notice that default argument names are different between BiSSE and
## MuSSE, but that the order is the same.
argnames(lik.b) # BiSSE: 0/1
argnames(lik.m) # MuSSE: 1/2

## 2: A 3-state example where movement is only allowed between
## neighbouring states (1 <-> 2 <-> 3), and where speciation and
## extinction rates increase moving from 1 -> 2 -> 3:

## You can get the expected argument order for any number of states
## this way (sorry - clunky).  The help file also lists the order.
diversitree:::default.argnames.musse(3)

## Here are the parameters:
pars <- c(.1,  .15,  .2,  # lambda 1, 2, 3
          .03, .045, .06, # mu 1, 2, 3
          .05, 0,         # q12, q13
          .05, .05,       # q21, q23
          0,   .05)       # q31, q32

set.seed(2)
phy <- tree.musse(pars, 30, x0=1)

## Extract history from simulated tree and plot
## (colours are 1: black, 2: red, 3: blue)
col <- c("blue", "orange", "red")
h <- history.from.sim.discrete(phy, 1:3)
plot(h, phy, cex=.7, col=col)

## The states are numbered 1:3, rather than 0:1 in bisse.
states <- phy$tip.state
table(states)

## 2: Likelihood
## Making a likelihood function is basically identical to bisse.  The
## third argument needs to be the number of states.  In a future
## version this will probably be max(states), but there are some
## pitfalls about this that I am still worried about.
lik <- make.musse(phy, states, 3)

## Here are the arguments.  Even with three states, this is getting
## ridiculous.
argnames(lik)

## Start with a fully constrained model, but still enforcing stepwise
## changes (disallowing 1 <-> 3 shifts)
lik.base <- constrain(lik, lambda2 ~ lambda1, lambda3 ~ lambda1,
                      mu2 ~ mu1, mu3 ~ mu1,
                      q13 ~ 0, q21 ~ q12, q23 ~ q12, q31 ~ 0, q32 ~ q12)

## Not run: 
p <- starting.point.musse(phy, 3)
fit.base <- find.mle(lik.base, p[argnames(lik.base)])

## Now, allow the speciation rates to vary:
lik.lambda <- constrain(lik, mu2 ~ mu1, mu3 ~ mu1,
                        q13 ~ 0, q21 ~ q12, q23 ~ q12, q31 ~ 0, q32 ~ q12)
fit.lambda <- find.mle(lik.lambda, p[argnames(lik.lambda)])

## Very little improvement in fit (this *is* a small tree)
anova(fit.base, lambda=fit.lambda)

## Run an MCMC with this set.  Priors will be necessary (using the
## usual exponential with mean of 2r)
prior <- make.prior.exponential(1 / (2 * (p[1] - p[4])))
samples <- mcmc(lik.lambda, coef(fit.lambda), nstep=1000, w=1,
                prior=prior, print.every=50)

## Posterior probability profile plots for the three speciation rates.
profiles.plot(samples[2:4], col)
abline(v=c(.1, .15, .2), col=col)

## End(Not run)

richfitz/diversitree documentation built on Oct. 3, 2023, 8:57 p.m.