NEWS.md

In rstudio/renv: Project Environments

renv (development version)

• renv now normalizes lockfile entries for Bioconductor packages installed via pak::pkg_install(), to help prevent spurious diffs being produced via renv::status(). (#1920)

• renv::install() now respects the prompt parameter when pak is enabled, as via options(renv.config.pak.enabled = TRUE). (#1907)

• Fixed an issue with renv's pak integration where renv could install the wrong version of a GitHub package during restore if options(renv.config.pak.enabled = TRUE) was set. (#1883)

• renv no longer interacts with the user during autoloading, which coincides with R startup. If the IDE offers a session init hook (RStudio does), loading is deferred until startup is complete and interaction is possible. Otherwise, any suggested renv actions, such as renv::restore(), are emitted as a message for the user to act on. (#1879, #1915).

• Fixed an issue where installation of packages from local sources, as via install("<package>", repos = NULL, type = "source"), could fail. (#1880)

• A new function, renv::lockfile_validate(), can be used to validate your renv.lock against a default or custom schema. (#1889)

renv 1.0.7

• Fixed an issue where renv's activate script failed to report version conflict errors when starting up. (#1874)

renv 1.0.6

• Fixed an issue where downloads could fail with curl >= 8.7.1. (#1869)

• Fixed an issue where renv::snapshot() did not properly normalize package records generated from packages installed using the pak package, e.g. via pak::pkg_install("cran::<package>").

• Fixed an issue where renv could incorrectly prompt the user to record a version of renv installed from GitHub in some cases. (#1857)

• renv::load() now delegates to base::load() when it detects that the call was likely intended for base::load(), but renv::load() was used instead (e.g. because base::load() was masked by renv::load()).

• renv::update() gains the lock argument, which can be used to instruct renv to automatically update the lockfile after the requested packages have been updated. (#1849)

• Fixed an issue where renv could fail to update the project autoloader after calling renv::upgrade(). (#1837)

• Fixed an issue where attempts to install binary packages from older PPM snapshots could fail. (#1839)

• renv now uses a platform-specific prefix on Linux for library and cache paths by default with R (>= 4.4.0). This is equivalent to setting RENV_PATHS_PREFIX_AUTO = TRUE. If necessary, this behavior can be disabled by setting RENV_PATHS_PREFIX_AUTO = FALSE in an appropriate R startup file. (#1211)

renv 1.0.5

• renv now only writes a .renvignore file into the cache directory if the cache appears to be part of the current project.

• renv now reports missing system libraries as part of its ABI checks in renv::diagnostics().

• Fixed an issue where renv::install(lock = TRUE) produced lockfiles containing records with extraneous data. (#1828)

renv 1.0.4

• renv::install() gains the lock argument. When TRUE, the project lockfile will be updated after the requested packages have been successfully installed. (#1811)

• renv now supports the use of GitHub Enterprise servers with the gitcreds package for authentication credentials. (#1814)

• renv::dependencies() now treats #| eval: !expr <...> chunk options as truthy by default, implying that such chunks are scanned for their R package dependencies. (#1816)

• renv::dependencies() now requires usages of the import package to be namespace-qualified in order to be handled via static analysis; that is, import::from(<pkg>) is parsed for dependencies, but from(pkg) is not. (#1815)

• renv::load() gains the profile argument, allowing one to explicitly load a specific profile associated with an renv project. See vignette("profiles", package = "renv") or https://rstudio.github.io/renv/articles/profiles.html for more details.

• renv::dependencies() no longer includes R dependency versions declared from a DESCRIPTION file in its output. (#1806)

• Fixed an issue where renv could fail to infer dependencies from R Markdown code chunks using engine 'R' (upper-case) rather than 'r' (lower-case). (#1803)

• Fixed an issue where renv did not report out-of-sync packages when one or more packages used in the project were not installed. (#1788)

• Fixed an issue where renv could over-aggressively activate P3M repositories when initializing a project. (#1782)

• renv::status() now notifies the user if the version of R recorded in the lockfile does not match the version of R currently in use. (#1779)

• Fixed an issue where packages could appear multiple times in the lockfile, if that package was installed into multiple library paths. (#1781)

• Installation of historical binaries of packages is once again enabled, now using the Posit Public Package Manager (P3M) service instead of Microsoft's (now defunct) MRAN service.

• renv::init() now respects the Remotes: field declared in a project's DESCRIPTION file, if any. (#1522)

• renv::embed() now supports Quarto Markdown (.qmd) files. (#1700)

• renv now sets the R_INSTALL_TAR environment variable to match the default tar executable (if any) when installing packages. (#1724)

• renv now uses --ssl-revoke-best-effort by default when downloading files using curl on Windows. (#1739)

• Fixed an issue where renv::install() could fail to detect incompatible recursive package dependencies. (#1671)

• renv::install() now records remote information for packages installed from CRAN-like repositories, and uses that information when generating a lockfile and restoring those packages. This helps ensure that packages installed within an renv project via calls like renv::install("<pkg>", repos = "<repos>") can still be successfully restored in future sessions. (#1765)

• renv::install() now lazily resolves project remotes. (#1755)

• renv::init() now respects Remotes declared within a project's DESCRIPTION file, if any.

• Calling renv::activate() without explicitly providing the profile argument now preserves the current profile, if any. Use renv::activate(profile = "default") if you'd like to re-activate a project using the default profile. (#1217)

• Fixed an issue where renv would try to prompt for the installation of BiocManager when activating a project using Bioconductor. (#1754)

• Fixed an issue where directories containing a large number of files could cause renv to fail to activate a project. (#1733)

• Expanded the set of Linux distributions detected for automatic transformation of Posit Package Manager URLs to install binary packages. renv now correctly detects Red Hat Enterprise Linux 9, Rocky Linux 8 and 9, SLES 15 SP4 and SP5, Debian 11 and 12, AlmaLinux 8 and 9, and Amazon Linux 2. (#1720, #1721)

renv 1.0.3

• Fixed an issue where renv could warn the project appeared to be out-of-sync when using packages installed without an explicit source recorded. (#1683)

• renv::install() gains the exclude argument, which can be useful when installing a subset of project dependencies.

• Fixed an issue where PPM repositories were not appropriately transformed into the correct binary repository in renv::restore() when using pak.

• renv::init() no longer prompts the user for the intended action for projects containing a library with only renv installed. (#1668)

• Fixed an issue where non-interactive usages of renv::init() could fail with projects containing a DESCRIPTION file. (#1663)

• Fixed an issue that could cause code within a project .Rprofile to execute before the project had been loaded in RStudio. (#1650)

• renv::snapshot() and renv::status() gain the dev argument. This can be used when you'd like to capture package dependencies from the Suggests field of your package's DESCRIPTION file. (#1019)

renv 1.0.2

• renv now parses package NAMESPACE files for imported dependencies. (#1637)

• renv no longer locks the sandbox by default.

• Fixed an issue where renv used the wrong library paths when attempting to activate the watchdog. This could cause a 10 second delay when activating the sandbox.

renv 1.0.1

• Fixed an issue where authentication headers could be duplicated when using the libcurl download method. (#1605)

• renv::use() now defaults to setting isolate = TRUE when sandbox = TRUE.

• Fixed an issue where the renv watchdog could fail to load, leading to slowness in activating the sandbox on startup. (#1617)

• Fixed an issue where renv did not display warnings / errors from renv::snapshot() when options(renv.verbose = FALSE) was set. The display of these messages is now controlled via the renv.caution.verbose R option. (#1607, #1608)

• renv::load() now notifies the user if the synchronization check took an excessive amount of time due to the number of files being scanned in the project. (#1573)

• renv::init() gains the load argument, making it possible to initialize a project without explicitly loading it. (#1583)

• renv now uses a lock when synchronizing installed packages with the cache. This should help alleviate issues that can arise when multiple R processes are installing and caching packages concurrently. (#1571)

• Fixed a regression in parsing expressions within R Markdown chunk options. (#1558)

• Fixed an issue that prevented renv::install() from functioning when source-only repositories were included. (#1578)

• Fixed a logic error in reading RENV_AUTOLOAD_ENABLED. (#1580)

• renv::restore() no longer runs without prompting on load if the library is empty. (#1543)

• renv::repair() now checks for installed packages which lack a known remote source, and updates their DESCRIPTION files if it can infer an appropriate remote source. This typically occurs when a package is installed from local sources, but appears to be maintained or published on a remote repository (e.g. GitHub). This was previously done in renv::snapshot(), but we've rolled back that change as the prompting was over-aggressive. (#1574)

• renv::status() now first reports on uninstalled packages, before reporting on used <-> installed mismatches. (#1538)

• When the RENV_STARTUP_DIAGNOSTICS environment variable is set to TRUE, renv now displays a short diagnostics report after a project's autoloader has been run. This can be useful when diagnosing why renv is slow to load in certain projects. (#1557)

• renv now ensures the sandbox is activated on load, for R processes which are launched with the renv sandbox on the library paths. (#1565)

• renv::restore() no longer erroneously prompts when determining the packages which need to be installed. (#1544)

• renv::update() now ensures the prompt parameter is properly respected during package installation. (#1540)

• renv::activate() no longer erroneously preserves the previous library paths after restarting the session within RStudio. (#1530)

• Use correct spelling of IRkernel package (#1528).

• Honor R_LIBCURL_SSL_REVOKE_BEST_EFFORT when using an external curl.exe binary to download files. (#1624)

renv 1.0.0

New features

• New renv::checkout() installings the latest-available packages from a repository. For example, renv::checkout(date = "2023-02-08") will install the packages available on 2023-02-08 from the Posit Package Manager repository. The actions argument allows you choose whether a lockfile is generated from the provided repositories ("snapshot"), or whether packages are installed from the provided repositories ("restore").

• renv::deactivate() gains a clean argument: when TRUE it will delete all renv files/directories, leaving the project the way it was found.

• renv::init() now uses Posit Public Package Manager by default, for new projects where the repositories have not already been configured externally. See the options renv.config.ppm.enabled, renv.config.ppm.default, and renv.config.ppm.url in ?config for more details (#430).

• renv::lockfile_create(), renv::lockfile_read(), renv::lockfile_write() and renv::lockfile_modify() provide a small family of functions for interacting with renv lockfiles programmatically (#1438).

• Handling of development dependencies has been refined. renv::snapshot() and renv::status() no longer track development dependencies, while install() continues to install them (#1019). Suggested packages listed in DESCRIPTION files are declared as development dependencies regardless of whether or not they're a "package" project.

• MRAN integration is now disabled by default, pending the upcoming shutdown of Microsoft's MRAN service. Users who require binaries of older R packages on Windows + macOS can consider using the instance of CRAN mirrored by the Posit Public Package Manager (#1343).

Bug fixes and minor improvements

• Development versions of renv are now tracked using the Git SHA of the current commit, rather than a version number that's incremented on every change (#1327). This shouldn't have any user facing impact, but makes renv maintenance a little easier.

• Fixed an issue causing "restarting interrupted promise evaluation" warnings to be displayed when querying available packages failed. (#1260)

• renv::activate() uses a three option menu that hopefully make your choices more clear (#1372).

• renv::dependencies() now discovers R package dependencies inside Jupyter notebooks (#929).

• renv::dependencies() includes packages used by user profile (~/.Rprofile) if renv::config$user.profile() is TRUE. They are set as development dependencies, which means that they will be installed by install() but not recorded in the snapshot.

• renv::dependencies() only extracts dependencies from text in YAML headers that looks like valid R code (#1288).

• renv::dependencies() no longer treats box::use(module/file) as using package module (#1377).

• renv::init() now prompts the user to select a snapshot type if the project contains a top-level DESCRIPTION file (#1485).

• renv::install(type = "source") now ensures source repositories are used in projects using PPM. (#927)

• renv::install() activates Bioconductor repositories when installing a package from a remote (e.g. GitHub) which declares a Bioconductor dependency (via a non-empty 'biocViews' field) (#934).

• renv::install() respects the project snapshot type, if set.

• renv::install() now keeps source when installing packages from source (#522).

• renv::install() now validates that binary packages can be loaded after installation, in a manner similar to source packages (#1275).

• renv::install() now supports Bioconductor remotes of the form bioc::<BiocVersion>/<Package>, for installing packages from a particular version of Bioconductor. Aliases like 'release' and 'devel' are also supported (#1195).

• renv::install() now requires interactive confirmation that you want to install packages (#587).

• renv::load() gives a more informative message if a lockfile is present but no packages are installed (#353).

• renv::load() no longer attempts to query package repositories when checking if a project is synchronized (#812).

• renv::load() no longer duplicates entries on the PATH environment variable (#1095).

• renv::restore() can now use pak::pkg_install() to install packages when pak integration is enabled. Set RENV_CONFIG_PAK_ENABLED = TRUE in your project's .Renviron if you'd like to opt-in to this behavior. Note that this requires a nightly build of pak (>= 0.4.0-9000); see https://pak.r-lib.org/dev/reference/install.html for more details.

• renv::restore() now emits an error if called within a project that does not contain a lockfile (#1474).

• renv::restore() correctly restores packages downloaded and installed from r-universe (#1359).

• renv::snapshot() now standardises pak metadata so CRAN packages installed via pak look the same as CRAN packages installed with renv or install.packages() (#1239).

• If renv::snapshot() finds missing packages, a new prompt allows you to install them before continuing (#1198).

• renv::snapshot() no longer requires confirmation when writing the first snapshot, since that's an action that can easily be undone (by deleting renv.lock) (#1281).

• renv::snapshot() reports if the R version changes, even if no packages change (#962).

• renv::snapshot(exclude = <...>) no longer warns when attempting to exclude a package that is not installed (#1396).

• renv::status() now uses a more compact display when packages have some inconsistent combination of being installed, used, and recorded.

• renv::status() now works more like renv::restore() when package versions are different (#675).

• renv::update() can now update packages installed from GitLab (#136) and BitBucket (#1194).

• renv::settings$package.dependency.fields() now only affects packages installed directly by the user, not downstream dependencies of those packages.

• renv functions give a clearer error if renv.lock has somehow become corrupted (#1027).

renv 0.17.3

• Fixed an issue where renv::install("bioc::<package>") could fail if BiocManager was not already installed. (#1184)

• Fixed an issue where package names were not included in the output of renv::diagnostics(). (#1182)

• The clarity of the message printed by renv::status() has been improved; in particular, renv should better report the recommended actions when a package required by the project is not installed.

• renv::snapshot() gains the exclude argument, for explicitly excluding certain packages from the generated lockfile.

• Fixed an issue where renv was passing the wrong argument name to installed.packages(), causing usages of renv to fail with R (<= 3.4.0). (#1173)

• renv now sets the SDKROOT environment variable on macOS if it detects that R was built using an LLVM build of clang on macOS.

• renv::install() now parses the remotes included within, for example, a DESCRIPTION file's Config/Needs/... field.

• renv now checks that the index directory is writable before attempting to use it, e.g. for the R available packages index maintained by renv. (#1171)

• renv now checks that the version of curl used for downloads appears to be functional, and reports a warning if it does not (for example, because a requisite system library is missing). The version of curl used for downloads can also be configured via the RENV_CURL_EXECUTABLE environment variable.

renv 0.17.2

• Fixed a regression that caused package hashes to be computed incorrectly in some cases. This was a regression in the 0.17.1 release. (#1168)

renv 0.17.1

• renv gains the configuration option install.remotes, which can be used to control whether renv attempts to read and use the Remotes: field included with installed packages. This can be set to FALSE if you'd like to ignore this field; e.g. because you know they will not be accessible. (#1133)

• General performance optimizations. In particular, renv::update(check = TRUE) should now execute much faster.

• renv now stores project settings within renv/settings.json rather than renv/settings.dcf. Old settings will be automatically migrated.

• The renv sandbox is now placed within the renv cache directory. (#1158)

• Fixed an issue where renv::status() could erroneously report a project was out-of-sync when using explicit snapshots. (#1159)

• Fixed an issue where renv::hydrate() would print spurious warnings. (#1160)

• renv::status() now suggests running renv::restore() if there are no packages installed in the project library. (#1060)

• Fixed an issue where renv would fail to query r-universe repositories. (#1156)

• renv no longer tries to set the SDKROOT environment variable on macOS for R (>= 4.0.0).

• Fixed an issue where installation of Bioconductor packages could fail when BiocManager was not installed. (#1156, #1155)

• Fixed an issue where the amount of time elapsed reported by renv::install() failed to include the time spent retrieving packages.

renv 0.17.0

• The performance of renv::snapshot() has improved.

• renv now maintains an index of available packages, as retrieved from the active package repositories, that is shared across R sessions. This should improve renv's performance when querying for available packages across multiple different R sessions.

• renv::hydrate() gains the prompt parameter. When TRUE (the default), renv will prompt for confirmation before attempting to hydrate the active library.

• Improved handling of package installation via SSH URLs with git. (#667)

• Improved handling of R version validation when using projects with Bioconductor. If you find renv is erroneously reporting that your version of R is incompatible with the version of Bioconductor you are using, you can set options(renv.bioconductor.validate = FALSE) to disable this validation behaviour. (#1148)

• Package names can now be associated with remotes in renv::install(); for example, you can use renv::install("igraph=igraph/rigraph") to install the igraph package. This is mainly important when using the renv.auth authentication tools, where the package name of a remote needs to be declared explicitly. (#667)

• Fixed an issue that could prevent renv::restore() from functioning when attempting to install packages which had been archived on CRAN. (#1141)

• renv::install() gains the dependencies argument, which behaves similarly to the equivalent argument in remotes::install_*(). In particular, this can be set to fields like Config/Needs/dev to tell renv to use custom DESCRIPTION fields for dependency resolution in installation.

• Fixed an issue where the function variant of the renv.auth option was not resolved correctly. (#667)

• renv::install() now supports remotes with a trailing slash -- such slashes are now removed. (#1135)

• Integration with the RStudio (Posit) Package Manager is now disabled by default on aarch64 Linux instances.

• The RENV_CACHE_MODE environment variable can now also be used to adjust the permissions set on downloaded package tarballs / binaries. (#988)

• Fixed an issue where fields of the form Remotes.1 could enter lockfile records for older versions of R. (#736)

• Fixed the performance of renv::update() in cases where integration with MRAN is enabled.

• Fixed an issue where package installation using pak could fail in some cases.

• renv_file_find() can now scan up to the root directory in Docker containers. (#1115)

• renv no longer uses the R temporary directory on Windows for the sandbox. The sandbox directory can be customized via the RENV_PATHS_SANDBOX environment variable if required. (#835)

• renv now reports the elapsed time when installing packages. (#1104)

• For projects using "explicit" snapshots, renv now reports if a package is required by the project, but the package is not currently installed. (#949)

• Fixed an issue where renv::snapshot() could fail to detect when no changes had been made to the lockfile.

• Fixed an issue where renv could emit JSON lockfiles which could not be parsed by external JSON readers. (#1102)

• renv now marks the sandbox as non-writable, which should hopefully alleviate issues where attempts to update installed packages would inadvertently install the updated package into the sandbox. (#1090)

• renv::use() gains the sandbox argument, which allows one to control whether the system library is sandboxed after a call to renv::use(). (#1083)

• The path to the Conda environment.yml file created by renv can now be customized via the RENV_PATHS_CONDA_EXPORT environment variable. We recommend setting this within your project-local .Renviron file as appropriate. (#1089)

• Fixed an issue where the renv sandbox location did not respect the active renv profile. (#1088)

renv 0.16.0

• renv now supports installation of packages with remotes of the form <package>=<remote>. However, the provided package name is ignored and is instead parsed from the remote itself. (#1064)

• renv now passes along the headers produced by the renv.download.headers option when bootstrapping itself in the call to utils::download.file(). (#1084)

• renv now reports if renv::snapshot() will change or update the version of R recorded in the lockfile. (#1069)

• renv now supports the install.packages.check.source R option, which is used to allow R to query source repositories even if the option options(pkgType = "binary") is set. (#1074)

• renv better handles packages containing git submodules when installed from GitHub remotes. (#1075)

• renv now handles local sources within the current working directory. (#1079)

• The renv sandbox is once again enabled by default. On Unix, the sandbox is now created by default within the project's renv/sandbox library. On Windows, the sandbox is created within the R session's tempdir(). The path to the renv sandbox can be customized via the RENV_PATHS_SANDBOX environment variable if required.

• Fixed an issue where renv::status() could report spurious changes when comparing packages installed using pak in some cases. (#1070)

• renv::restore() now also ensures the project activate script is updated after a successful restore. (#1066)

• Fixed an issue where renv could attempt to install a package from the repository archives even when type = "binary" was set. (#1046)

• Fixed an issue where package installation could fail when the R session is configured to use multiple repositories, some of which do not provide any information on available packages for certain binary arms of the repository. (#1045)

• renv now uses jsonlite for reading lockfiles when loaded. This should help ensure useful errors are provided for manually-edited lockfiles which contain a JSON parsing error. If the jsonlite package is not loaded, renv will fall back to its own internal JSON parser. (#1027)

• Fixed an issue that would cause renv to fail to source the user ~/.Rprofile if it attempted to register global calling handlers, e.g. as prompt::set_prompt() does. (#1036)

• (Linux only) renv now resets ACLs on packages copied to the cache, to avoid persisting default ACLs that might have been inherited on packages installed into a local project library. If desired, this behavior can be disabled by setting the RENV_CACHE_ACLS environment variable to FALSE. If you need finer control over ACLs set on packages moved into the cache, consider defining a custom callback via the renv.cache.callback R option. (#1025)

• Fixed an issue where .gitignore inclusion rules for sub-directories were not parsed correctly by renv for dependency discovery. (#403)

• Fixed an issue where renv could report spurious diffs within renv::status() when comparing package records installed from pak versus the default R package installer. (#998)

• Fixed an issue where renv::use_python() could cause the Requirements field for packages in the lockfile to be unintentionally dropped. (#974)

• The R option renv.cache.callback can now be set, to run a user-defined callback after a package has been copied into the cache. This can be useful if you'd like to take some action on the cached package's contents after the package has been moved into the cache.

• (Unix only) The RENV_CACHE_MODE environment variable can now be used to change the access permissions of packages copied into the cache. When set, after a package is copied into the cache, renv will use chmod -Rf to try and change the permissions of the cache entry to the requested permissions.

• (Unix only) The RENV_CACHE_USER environment variable can now be used to change the ownership of folders copied into the cache. When set, after a package is copied into the cache, renv will use chown -Rf to try and change the ownership of that cache entry to the requested user account.

• Fixed an issue where repositories containing multiple packages in sub-directories could fail to install. (#1016)

renv 0.15.5

• Fixed an issue where indexing of packages in the package cellar could be slow. (#1014)

• Fixed an issue where installation of packages from Bioconductor's binary Linux package repositories could fail. (#1013)

• renv::restore() now supports restoration of packages installed from R-Forge. (#671)

• Fixed an issue where renv::init(bioconductor = TRUE) would not update the version of Bioconductor used if a project setting had already been set.

• It is now possible to "update" an existing lockfile by using renv::snapshot(update = TRUE). When set, any records existing in the old lockfile, but not the new lockfile, will be preserved. (#727)

• Fixed an issue where renv could fail to parse Git remotes for users whose username contains a number. (#1004)

• renv no longer infers a dependency on the "quarto" R package in projects containing a _quarto.yml file. (#995)

• Fixed an issue where renv could fail to download a package from MRAN if a compatible source package of the same version was available from the active R repositories. (#990)

• renv now reports permission errors during download more clearly. (#985)

• Fixed an issue where RENV_PATHS_LIBRARY_ROOT_ASIS was not interpreted correctly. (#976)

• renv::modify() gains the changes argument, which can be used to modify a project lockfile non-interactively.

• renv::clean() now returns the project directory, as documented. (#922)

• Fixed an issue where renv could fail to parse embedded YAML chunk options in R Markdown documents. (#963)

• renv now sets default placeholder names for the repos R option, for any repository URLs which happen to be unnamed. (#964)

• Fixed an issue where renv didn't respect the PATH ordering when discovering Python installations via renv_python_discover(). (#961)

• Fixed an issue where renv could fail to install packages containing multibyte unicode characters in their DESCRIPTION file. (#956)

• Fixed detection of Rtools 4.2 (#1002)

renv 0.15.4

• Fixed an issue where package installation could fail when referencing the cache via a tilde-aliased path, e.g. ~/.local/share/renv. (#953)

renv 0.15.3

• A variety of fixes for R CMD check.

• renv gains an experimental function, renv::autoload(), to be used as a helper for automatically loading a project for R processes launched within a sub-directory of that project. See ?renv::autoload for more details.

• renv will now print a warning message when attempting to read a lockfile containing merge conflict markers (as from e.g. a git merge). (#945)

• Fixed an issue where renv::install() could install into the wrong library path on Windows, if the R installation had a site-wide profile that mutated the library paths. (#941)

• Fixed an issue where renv::install() would fail to find a package within the cache when using an abbreviated commit hash for installation. (#943)

• Fixed an issue where renv's automatic snapshot was not run after calls to renv::install() in some cases. (#939)

• Fixed an issue where renv would incorrectly copy a package from the cache, if the cached version of the package and the requested version of the package had the same package version, even if they were retrieved from different sources. (#938)

• The path to an renv tarball can now be set via the environment variable RENV_BOOTSTRAP_TARBALL, to be used to help renv bootstrap from local sources. This can either be the path to a directory containing renv source tarballs, or the path to the tarball itself.

• Fixed an issue where the R site library would not be appropriately masked for resumed RStudio sessions. (#936)

renv 0.15.2

• Fixed issues encountered in R CMD check.

renv 0.15.1

• Fixed an issue where renv inadvertently inserted extra newlines into a DESCRIPTION file when adding Remotes fields after install. (#914)

• Fixed an issue where packages installed from a remote sub-directory would fail to install when later re-installed from the cache. (#913)

• renv now recognizes YAML chunk options of the form #| key: value when used in R Markdown documents. (#912)

• Fixed an issue where the R site library was visible in renv projects with the system library sandbox disabled.

• Fixed an issue where renv could update the wrong .gitignore in R processes launched by callr (e.g. in devtools::install). (#910)

• Fixed an issue where renv could fail to read mis-encoded DESCRIPTION files. (#908)

• Fixed an issue where config$cache.symlinks() would report NULL when unset. (#906)

renv 0.15.0

• The development branch for renv has moved from master to main.

• renv package records in the lockfile now include a Requirements entry, which gives a list of R packages this package depends on in some way. This is primarily for internal use by the pak package.

• Fixed an issue where packages containing DESCRIPTION files using a latin1 encoding would not be read correctly by renv.

• Fixed an issue that could cause renv::dependencies() to fail when a malformed DESCRIPTION file was encountered. (#892)

• The path to the project-local renv folder can now be configured via the RENV_PATHS_RENV environment variable. This can be useful if you'd prefer to store your project's renv resources within an alternate location in the project. (#472)

• renv now uses an external library by default for R package projects, with the library located within tools::R_user_dir("renv", "cache"). This directory can be configured via the RENV_PATHS_LIBRARY_ROOT environment variable if desired. See vignette("packages", package = "renv") for more details. (#384)

• renv now uses the repositories as defined within the project lockfile (if any) when attempting to bootstrap itself in a project. (#820)

• The renv sandbox is now disabled by default -- see #614 for more details.

• renv gains the function repair(), to be used to attempt to repair the project library when links into the global package cache appear to be broken. (#378)

• Fixed an issue where the staging library used during install could fail to inherit the same directory permissions as the target library itself. (#331)

• Fixed an regression which caused renv::history() to fail. (#886)

• renv gains experimental support for the pak package. Set RENV_CONFIG_PAK_ENABLED = TRUE in an appropriate .Renviron file to enable pak integration. When enabled, calls to renv::install() will use pak to download and install packages.

• renv::init() gains the bioconductor argument, to be used to initialize a project with a particular Bioconductor release. You can also use renv::init(bioconductor = TRUE) to initialize with the latest-available release for the version of R being used.

• Project settings can now be overridden by setting an R option of the same name. For example, one could force a project to use Bioconductor 3.14 by setting options(renv.settings.bioconductor.version = "3.14") within the project .Rprofile (or similar startup R profile).

• The ad-hoc package repository called "local sources" has been renamed to the "package cellar". In addition, the path to the cellar is now controlled by the RENV_PATHS_CELLAR environment variable, rather than RENV_PATHS_LOCAL. This change was made to reduce confusion between "local sources" of packages located somewhere on the filesystem, as opposed to packages explicitly placed in this ad-hoc repository. RENV_PATHS_LOCAL remains supported for backwards compatibility.

• The RENV_PATHS_CELLAR environment variable can now be set to multiple paths. Use ; as a separator between paths; for example, RENV_PATHS_LOCAL=/path/to/sources/v1;/path/to/sources/v2. (#550)

• Packages installed via e.g. renv::install("./path/to/package") will now retain the relative path to that package within the lockfile. (#873)

• Fixed an issue where invalid config option values were not properly reported. (#773)

• renv now supports restoration of packages installed via one of the r-universe repositories.

• renv gains the bioconductor.version project setting, used to freeze the version of Bioconductor used in a particular project. When set, this will override any version that might be selected via the BiocManager package. (#864)

• renv now infers that parameterized R Markdown documents have a dependency on the shiny package. In addition, R code included within the params: list will be parsed for dependencies. (#859)

• renv now ignores hidden directories during dependency discovery by default. If you want to force a particular hidden directory to be included for discovery, you can use a .renvignore file with an explicit inclusion criteria; e.g. !.hidden/.

• renv now supports the *release remotes specifier for GitHub repositories, for requesting installation of the latest declared release of a package from GitHub. (#792)

• renv now handles packages stored within the sub-directory of a Git repository better. (#793)

• Fixed an issue where renv::history() would fail to resolve the correct lockfile path if the working directory was changed. (#834)

• Refined dependency discovery within glue::glue() expressions.

• renv now parses packages referenced via the base_format field within an R Markdown document's YAML header. (#854)

• Fixed an issue where renv would fail to produce the appropriate binary repository URL for RSPM repositories built using Red Hat Enterprise Linux.

• Fixed an issue where renv::snapshot() could cause the environment name and / or path associated with a Python environment to be omitted from the lockfile. (#843)

• Fixed an issue where renv::restore() could fail to restore packages which referred to their source via an explicit path in the Source field. (#849)

• renv no longer requires explicit user consent when used within Singularity containers. (#824, @kiwiroy)

• renv now respects the R_PROFILE_USER environment variable, in addition to the user.profile configuration option, when considering whether the user .Rprofile should be examined for package dependencies. (#821)

• The renv auto-loader can now be disabled by setting the environment variable RENV_AUTOLOADER_ENABLED = FALSE. This can be useful if you'd like to explicitly control how a project is loaded, e.g. by calling renv::load() explicitly.

• renv::snapshot() gains the repos argument, to be used to force the lockfile to be generated with the requested set of R repositories encoded within.

• renv now validates that the repos option, as used by renv::snapshot(), is a named vector. (#811)

• Fixed an issue where renv's shims, e.g. for install.packages(), failed to pass along other optional arguments to the shimmed function correctly. (#808)

renv 0.14.0

• renv now uses tools::R_user_dir() to resolve the default path to the global renv cache, for R installations 4.0.0 or greater. If the renv cache still exists at the old location, that location will be used instead. This change should only affect brand new installations of renv on newer versions of R.

• Fixed an issue with renv tests failing with R (>= 4.2.0).

• renv will no longer auto-activate itself within R processes launched via R CMD INSTALL. This behavior can be controlled if necessary via the RENV_ACTIVATE_PROJECT environment variable -- set this to TRUE to force the project in the current working directory to be activated, and FALSE to suppress the renv auto-loader altogether. (#804)

• Added dependency discovery support for R utility scripts identified by a shebang line instead of a file extension. (#801; @klmr)

• Fixed an issue where renv::install("<package>", type = "both") would attempt to install the package from sources, even if the current system did not have the requisite build tools available. (#800)

• renv::scaffold() gains the settings argument, used to create a project scaffolding with some default project options set. (#791)

• renv now determines the default branch name for packages installed from GitLab without an explicit reference supplied; for example, as in renv::install("gitlab::<user>/<repo>"). (#795)

• renv now infers a dependency on the bslib package for R Markdown documents using custom themes. (#790)

• renv will now prompt users to activate the current project when calling renv::snapshot() or renv::restore() from within a project that has not yet been activated. (#777)

• renv now has improved handling for git remotes. (#776; @matthewstrasiotto)

• renv::restore() gains the exclude argument, used to exclude a subset of packages during restore. (#746)

• Fixed an issue where renv::dependencies() could fail to parse dependencies in calls to glue::glue() that used custom open and close delimiters. (#772)

• Fixed an issue where renv::init(bare = TRUE) would unnecessarily scour the project for R package dependencies. (#771)

• Fixed an issue where renv could fail to install packages located on GitHub within sub-subdirectories. (#759)

• renv gains the function embed(), used to embed a lockfile with an R document (via a call to renv::use()).

• renv::use() gains the lockfile argument. This can be useful for R Markdown documents and scripts that you'd like to run with the context for a particular lockfile applied.

• renv::rebuild() gains the type parameter, for parity with renv::install().

• Fixed an issue where renv could incorrectly copy an incompatible version of an R package from a site library into the project library during install. (#750)

• renv::dependencies() can now parse (some) usages of parsnip::set_engine().

• renv::dependencies() now has improved handling for piped expressions.

• Fixed crash during dependency discovery when encountering box::use() declarations that use a trailing comma, and no longer treat . and .. as package names. (@klmr)

• renv::clean() no longer attempts to clean the system library by default. (#737)

• Fixed an issue where install.packages() could fail when used within an renv project to install a package from local sources. (#724)

• The chunk renv.ignore parameter can now be set to FALSE. When set, renv will explicitly parse dependencies from chunks even if other chunk metadata would have told renv to ignore it (e.g. because it was marked with eval=F). (#722)

• Fixed an issue where chunks with the chunk option eval=F would still be scanned for dependencies. (#421)

• In interactive sessions, renv::use_python() will now prompt for the version of Python to be used. Python installations in a set of common locations will be searched. See ?renv::use_python() for more details.

• Fixed an issue where renv would fail to retrieve packages from the archives if the lockfile entry was tagged with a RemoteSha field.

• renv::restore() will now prefer restoring packages from the repository named in the Repository field if available. The name is matched against the repository names set in the R repos option, or as encoded in the renv lockfile. (#701)

• renv now supports the discovery of dependencies within interpolated strings as used by the glue package.

• RENV_CONFIG_EXTERNAL_LIBRARIES can now be configured to use multiple library paths, delimited by either :, ;, or ,. (#700)

• renv gains the configuration option, exported.functions, controlling which functions and objects are placed on the R search path when renv is attached (e.g. via library(renv)). Set this to NULL to instruct renv not to place any functions on the search path. This helps avoid issues with, for example, renv::load() masking base::load(). When set, all usages of renv APIs must be explicitly qualified with the renv:: prefix.

renv 0.13.2

• renv::install("user/repo/subdir with spaces") now works as expected. (#694)

• renv can now parse package dependencies declared by targets::tar_option_set(packages = <...>). (#698)

• renv no longer performs an automatic snapshot following a user-canceled renv action -- for example, if renv::restore() is canceled, the next automatic snapshot will be suppressed. (#697)

• Added the vcs.ignore.local project setting, to control whether the project's renv/local folder is added to renv's VCS ignore file (e.g. renv/.gitignore). (#696)

• Fixed an issue where renv's bootstrapping code could inadvertently bootstrap with the wrong version of renv, if the source and binary versions of renv on CRAN were not in sync. (#695)

• Fixed an issue where renv::status() could provide a misleading message for packages which are recorded in the lockfile, but not explicitly required by the project. (#684)

renv 0.13.1

• renv::clean() gains the actions argument, allowing the caller to control which specific actions are taken during a clean() operation.

• renv no longer performs an automatic snapshot after a call to renv::status(). (#651)

• Fixed an issue where attempts to transform RSPM repository URLs could fail if the copy of R was installed without a local CRAN_mirrors.csv file.

• Fixed an issue where renv::init() could fail when passed a relative path to a directory. (#673)

• Fixed an issue where renv::dependencies() would miss dependencies in R Markdown YAML headers containing multiple output formats. (#674)

• renv::install() now better respects the Remotes field in a project DESCRIPTION file, if available. (#670)

• RENV_DOWNLOAD_METHOD is now treated as an alias for RENV_DOWNLOAD_FILE_METHOD.

• Fixed an issue where renv would fail to load if the ~/.Rprofile existed but was an empty file.

renv 0.13.0

• renv::snapshot() no longer creates an renv/activate.R file in the project folder if one does not already exist. (#655)

• The renv::hydrate() function gains the update argument, used to control whether renv::hydrate() chooses to update packages when invoked. When set to TRUE, if the version of a package installed in the source library is newer than that of the project library, then renv will copy that version of the package into the project library. (#647)

• The RENV_PATHS_PREFIX_AUTO environment variable can now be set to instruct renv to include an OS-specific component as part of the library and cache paths. This is primarily useful for Linux systems, where one might want to share a global cache with multiple different operating systems. The path component is constructed from the ID and VERSION_CODENAME / VERSION_ID components of the system's /etc/os-release file.

• renv's dependency discovery machinery now has preliminary support for packages imported via the box package; e.g. box::use(dplyr[...]).

• Multiple cache paths can now be specified, with each cache path separated by either a ; or :. This can be useful when you'd like to use multiple package caches within the same project; for example, because you'd like to share a read-only cache with a set of projects. (#653, @vandenman)

• Fixed an issue where renv could fail to discover dependencies in directories with very large .gitignore or .renvignore files. (#652)

• renv gains a new configuration option, install.shortcuts. When enabled, if renv discovers that a package to be installed is already available in the user or site libraries, renv will instead install a copy of that package into the project library. (#636)

• renv gains a new function, renv::use(), used to download, install, and load a set of packages directly within an R script. renv::use() can make it easier to share a standalone R script, with the packages required to install that script embedded directly in the script. It is inspired in part by the groundhog package.

• renv::install(".") can now be used to install a package from sources within the current working directory. (#634)

• Fixed an issue where renv::update() could fail if a package installed from GitHub was missing the RemoteHost field in its DESCRIPTION file. (#632)

• renv now has support for custom project profiles. Profiles can be used to activate different sets of project libraries + lockfiles for different workflows in a given project. See vignette("profiles", package = "renv") for more details.

• Fixed an issue where attempts to initialize an renv project in a path containing non-ASCII characters could fail on Windows. (#629)

• Fixed an issue where renv::install("<package>") could fail if renv chose to install the package from MRAN rather than from one of the active package repositories. (#627)

• renv again defaults to using the project's renv/staging folder for staged / transactional installs. Use the RENV_PATHS_LIBRARY_STAGING environment variable if more granular control over the staging library path is required. This fixes issues on Windows with creating junction points to the global package cache on Windows. (#584)

• renv no longer skips downloading a requested source package if an existing cached download exists and appears to be valid. This should help avoid issues when attempting to install a package whose associated tarball has changed remotely. (#504)

• During bootstrap, renv will now attempt to download and unpack a binary copy of renv if available from the specified package repositories.

• renv now always attempts to bootstrap itself from the R Project's Cloud package repository, as a fallback in case no other repository is available. (#613)

• renv::rebuild(<package>) now uses the latest-available version of the requested package(s) if those packages are not currently installed.

• Fixed an issue where renv::restore(library = "/path/to/lib") would fail to restore packages, if those packages were already installed on the active library paths (as reported by .libPaths()). (#612)

• renv::snapshot() gains the reprex argument. Set this to TRUE if you'd like to embed an renv lockfile as part of a reproducible example, as generated by the reprex package.

• renv::status() now reports packages that are referenced in a project's scripts, but are neither installed in the project library nor recorded in the lockfile. (#588)

• Fixed an issue where package installation could fail if the configure.vars option was set to be a named character, rather than a named list. (#609)

renv 0.12.5

• Fixed an issue where renv would fail to bootstrap. (#608)

renv 0.12.4

• renv now invalidates the available packages cache if the https_proxy environment variable changes. (#579)

• renv::install(<pkg>) will now install the latest-available version of that package from local sources, if that package is available and newer than any package available on the active package repositories. (#591)

• The configuration option startup.quiet has been added, allowing one to control whether renv will display the typical startup banner when a project is loaded.

• renv now better handles being unloaded and reloaded within the same R session. In particular, warnings related to a corrupted lazy-load database should no longer occur. (#600)

• renv no longer reinstalls packages that are already installed and up-to-date in bare calls to renv::install().

• renv now uses the R temporary directory for staging, when performing transactional restores / installs. If you need to control the path used for staged installs, please set the RENV_PATHS_LIBRARY_STAGING environment variable.

• The install.verbose configuration option has been added. When set to TRUE, renv will stream the output generated by R when performing a package installation. This can be helpful in some cases when diagnosing a failed restore / install. (#330)

• Fixed an issue where renv could fail to parse R Markdown chunk headers with an empty label. (#598)

• The environment variable RENV_PATHS_LIBRARY_ROOT_ASIS can now be used to control whether the project name should be used as-is when forming the library path within the RENV_PATHS_LIBRARY_ROOT folder. Set this to "TRUE" if you would prefer renv did not append a unique identifier to your project's library path. (#593)

• Fixed an issue where GitLab references were not URL encoded. (#590)

• renv no longer emits warnings when parsing multi-mode R files that make use of re-used knitr chunks (those specified as <<label>>). (#586)

• The library used for staged installs can now be configured via the RENV_PATHS_LIBRARY_STAGING environment variable. (#584)

• Fixed an issue where bootstrapping an older version of renv could fail if the R repositories had not been appropriately set.

renv 0.12.3

• Fixed an issue where renv::dependencies() could give an error if called with a path argument of length > 1.

• renv::restore() gains the rebuild argument, allowing users to control whether packages should be rebuilt on restore() rather than installed via links or copies from the cache, or other sources providing already-installed packages.

• renv will now attempt to bootstrap itself from CRAN, in addition to any repositories declared via getOption("repos"). If you'd prefer to disable this behavior, you can set options(renv.bootstrap.repos = character()).

• The renv setting r.version has been added. This can be set if you'd like to associate a particular project with a specific version of R, independent of the version of R actually used when subsequent lockfiles are created via renv::snapshot(). For example, setting renv::settings$r.version("4.0") will ensure that R version "4.0" is encoded in the lockfile for future calls to renv::snapshot() in a project. (#254)

• renv::dependencies() now detects the usage of R packages within dotfiles; e.g. the project .Rprofile. (#569)

• renv::status() gains the cache argument, used to control whether renv::status() also performs diagnostics on the global package cache. (#570)

• Fixed an issue where renv::status() would make an un-necessary call to renv::dependencies(). (#570)

• Fixed an issue where renv::install("bioc::<package>", rebuild = TRUE) would fail to install the requested package. (#565)

• Fixed an issue where the repository name for a package installed from an R package repository was sometimes incorrect. (#402)

• When RENV_PATHS_LIBRARY_ROOT is set, renv will now disambiguate library paths based on a hash of the project's path. (#564)

renv 0.12.2

• renv no longer errs when running tests with _R_CHECK_SUGGESTS_ONLY_=false.

renv 0.12.1

• renv now ensures all of its dependencies are loaded eagerly when running tests, to avoid issues with missing + lazily-loaded packages.

• renv::snapshot() now accepts library paths specified with a relative path. (#562)

• renv::snapshot() no longer excludes the project itself, for R package projects that use golem. (#538)

• The renv configuration option cache.symlinks can now be used to control whether renv used symlinks into the cache, as opposed to full package copies. Please see ?renv::config for more details. (#556)

• renv::snapshot() gains the packages argument, to be used when creating a lockfile that captures a specific set of packages and their dependencies. renv will use the currently-installed versions of those packages when determining the package records to be written to the lockfile. (#554)

• renv::dependencies() now accepts an R function as the first argument, for finding the packages used by a particular function. Currently, package usages must be prefixed with :: to be detected. (#554)

• renv::record(<package>) now ensures that the latest-available version of that package is recorded in the lockfile. Previously, a package record without any specified version was added instead. For existing records without a recorded version, the latest-available version on the package repositories will be used during restore() instead. (#540)

• renv now reads the default branch tagged for repositories created on GitHub, ensuring that calls of the form renv::install("<user>/<repo>") resolve to the declared default branch, rather than always defaulting to "master". (#557)

• renv now only installs packages from sources if it detects that build tools are available. This determination is done by checking whether make is available on the PATH. (#552)

• Warnings related to unknown sources can now be suppressed by setting options(renv.warnings.unknown_sources = FALSE). (#546)

• renv now ignores chunks with the parameter exercise=TRUE set, under the assumption that such chunks might contain errors and so otherwise be un-parsable.

• renv now warns if sandbox generation takes a long time (> 30 seconds).

• renv now provides an optional locking mechanism, to help minimize the chance of interprocess conflicts when multiple R processes need to use the same renv project. The option is currently disabled by default; it can be enabled by setting options(renv.config.locking.enabled = TRUE) in an appropriate R startup file. (#525)

renv 0.12.0

• renv now uses R's internal tar implementation by default on Windows. This is done to avoid issues that may occur when a version of tar.exe on the PATH exists, but does not accept Windows-style paths. The TAR environment variable can be set if one needs to explicitly force the use of a particular tar.exe executable. (#521)

• renv now prepends renv (<version>) to the user agent string. This should help ensure that package binaries are located when installing packages from RSPM outside of RStudio. (#520)

• renv now uses a task callback to detect mutations to the project library when the auto.snapshot configuration option is enabled. This will help ensure that automatic snapshots occur when packages are installed via a mechanism not explicitly understood by renv. (#501)

• renv now treats the user + site libraries as package sources during a restore. If renv sees that a package already installed in one of these libraries is compatible with the record requested via renv::install() or renv::restore(), that copy of the package will be copied and used. (#492)

• renv now performs a lighter-weight check as to whether the project lockfile is synchronized with the project library on load. The default value for the synchronized.check config option has been changed back to TRUE. (#496)

• renv now handles the remotes syntax for installing packages lying within the sub-directory of a GitHub repository; that is, renv::install("user/repo/subdir") should work as expected. (#497)

• Fixed an issue where renv did not construct the correct URL for packages to be installed from Bitbucket remotes. (#494)

• Fixed an issue where the RENV_PATHS_PREFIX environment variable was inappropriately normalized when renv was loaded. (#465)

renv 0.11.0

• Fixed an issue where renv::install(..., type = "binary") would still attempt to install packages from sources in some cases. (#461)

• renv now always writes renv/.gitignore, to ensure that the appropriate directories are ignored for projects which initialize git after renv itself is initialized. (#462)

• R Markdown documents with the .Rmarkdown file extension are now parsed for dependencies.

• Fixed an issue where setting the external.libraries configuration option would trigger a warning. (#452)

• Improved handling of unicode paths on Windows. (#451)

• renv::snapshot(project = <path>) now properly respects .gitignore / .renvignore files, even when that project has not yet been explicitly initialized yet. (#439)

• The default value of the synchronized.check option has been changed from TRUE to FALSE.

• Fixed an issue where packages downloaded from Bitbucket and GitLab did not record the associated commit hash.

• Fixed an issue where attempting to install packages from GitLab could fail to install the correct version of the package. (#436)

• renv::snapshot() now preserves records in a lockfile that are only available for a different operating system. This should make it easier to share lockfiles that make use of platform-specific packages. (#419)

• renv better handles files that are removed during an invocation to renv::dependencies(). (#429)

• The configuration option install.staged has been renamed to install.transactional, to better reflect its purpose. install.staged remains supported as a deprecated alias.

• Fixed an issue where renv could fail to parse non-ASCII content on Windows. (#421)

• renv::update() gains the exclude argument, useful in cases where one would like to update all packages used in a project, except for a small subset of excluded packages. (#425)

• renv::update() now respects the project ignored.packages setting. (#425)

• Fixed an issue where RSPM binary URL transformations could fail for Ubuntu Trusty. (#423)

• renv now records the OS_type reported in a package's DESCRIPTION file (if any), and ignores packages incompatible with the current operating system during restore. (#394)

renv 0.10.0

• renv::install() gains the type argument, used to control whether renv should attempt to install packages from sources ("source") or using binaries ("binary").

• renv now knows how to find and activate Rtools40, for R 4.0.0 installations on Windows.

• The RENV_PATHS_PREFIX environment variable can now be used to prepend an optional path component to the project library and global cache paths. This is primarily useful for users who want to share the renv cache across multiple operating systems on Linux, but need to disambigutate these paths according to the operating system in use. See ?renv::paths for more details.

• Fixed an issue where renv::install() could fail for packages from GitHub whose DESCRIPTION files contained Windows-style line endings. (#408)

• renv::update() now also checks and updates any Bioconductor packages used within a project. (#392)

• renv now properly parses negated entries within a .gitignore; e.g. !script.R will indicate that renv should include script.R when parsing dependencies. (#403)

• Fixed an issue where packages which had only binaries available on a package repository were not detected as being from a package repository. (#402)

• Fixed an issue where calls of the form p_load(char = <vctr>) caused a failure when enumerating dependencies. (#401)

• Fixed an issue where renv::install() could fail when multiple versions of a package are available from a single repository, but some versions of those packages are incompatible with the current version of R. (#252)

• Fixed an issue where downloads could fail when the associated pre-flight HEAD request failed as well. (#390)

• Fixed an issue where empty records within a DESCRIPTION file could cause renv::dependencies() to fail. (#382)

• renv will now download binaries of older packages from MRAN when possible.

• renv will now attempt to re-generate the system library sandbox if it is deleted while a session is active. (#361)

• Fixed an issue where Python packages referenced using reticulate::import() were incorrectly tagged as R package dependencies. Similarly, renv now only considers calls to modules::import() if those calls occur within a call to modules::module(). (#359)

• renv::scaffold() now also generates a lockfile when invoked. (#351)

• The argument confirm has been renamed to prompt in all places where it is used. confirm remains supported for backwards compatibility, but is no longer explicitly documented. (#347)

• The continuous integration renv vignette now also contains a template for using renv together with GitLab CI. (#348, @artemklevtsov)

• renv now properly resets the session library paths when calling renv::deactivate() from within RStudio. (#219)

• renv::init() now restores the associated project library when called in a project containing a lockfile but no project library nor any pre-existing project infrastructure.

• Fixed an issue on Windows where attempts to download packages from package repositories referenced with a file:// scheme could fail.

• The configuration option dependency.errors has been added, controlling how errors are handled during dependency enumeration. This is used, for example, when enumerating dependencies during a call to renv::snapshot(). By default, errors are reported, and (for interactive sessions) the user is prompted to continue. (#342)

• renv::dependencies() gains two new arguments: the progress argument controls whether renv reports progress while enumerating dependencies, and errors controls how renv handles and reports errors encountered during dependency discovery. The quiet argument is now soft-deprecated, but continues to be supported for backwards compatibility. Specifying quiet = TRUE is equivalent to specifying progress = FALSE and errors = "ignored". Please see the documentation in ?dependencies for more details. (#342)

• The environment variable RENV_PATHS_LIBRARY_ROOT can now be set, to instruct renv to use a particular directory as a host for any project libraries that are used by renv. This can be useful for certain cases where it is cumbersome to include the project library within the project itself; for example, when developing an R package. (#345)

• The code used to bootstrap renv (that is, the code used to install renv into a project) has been overhauled. (#344)

• renv no longer unsets an error handler set within the user profile when loading a project. (#343)

• renv gains the "explicit" snapshot type, wherein only packages explicitly listed as dependencies within the project DESCRIPTION file (and those package's transitive dependencies) will enter the lockfile when renv::snapshot() is called. (#338)

• renv will now transform RSPM source URLs into binary URLs as appropriate, allowing renv to use RSPM's binary repositories during restore. See ?config for more details. (#124)

• renv will now infer a dependency on hexbin in projects that make use of the ggplot2::geom_hex() function.

• renv now tries to place Rtools on the PATH when a package is installed with the install.packages() hook active. (#335)

renv 0.9.3

• Fixed an issue where attempts to specify RENV_PATHS_RTOOLS would be ignored by renv. (#335)

• Fixed an issue where downloads could fail when using the wininet downloader, typically with a message of the form "InternetOpenUrl failed: 'The requested header was not found'".

• renv better handles projects containing special characters on Windows. (#334)

• renv better handles unnamed repositories. (#333)

• renv gains the config option hydrate.libpaths, allowing one to control the library paths used by default for renv::hydrate(). (#329)

• renv::hydrate() gains the sources argument, used to control the library paths used by renv when hydrating a project. (#329)

• renv now sandboxes the system library by default on Windows.

• renv now validates that the Xcode license has been accepted before attempting to install R packages from sources. (#296)

• The R option renv.download.override can now be used to override the machinery used by renv when downloading files. For example, setting options(renv.download.override = utils::download.file) would instruct renv to use R's own downloader when downloading files from the internet. This can be useful when configuration of curl is challenging or intractable in your environment, or you've already configured the base R downloader suitably.

• renv::use_python("~/path/to/python") now works as expected.

• renv now properly expands R_LIBS_SITE and R_LIBS_USER when set within a startup .Renviron file. (#318)

• The renv.download.headers option can now be used to provide arbitrary HTTP headers when downloading files. See the Authentication section in vignette("renv") for more details. (#307)

• renv gains the project setting package.dependency.fields, for controlling which fields in an R package's DESCRIPTION file are examined when discovering recursive package dependencies. This can be useful when you'd like to instruct renv to track, for example, the Suggests dependencies of the packages used in your project. (#315)

• renv now better handles repositories referenced using file URIs.

• Packages installed from GitHub using renv::install() will now also have Github* fields added, in addition to the default Remote* fields. This should help fix issues when attempting to deploy projects to RStudio Connect requiring packages installed by renv. (#397)

• renv now prefers using a RemoteType field (if any) when attempting to determine a package's source. (#306)

• renv gains a new function renv::scaffold(), for generating renv project infrastructure without explicitly loading the project. (#303)

• renv now updates its local .gitignore file, when part of a git repository whose git root lives in a parent directory. (#300)

renv 0.9.2

• Fixed an issue in invoking find on Solaris.

renv 0.9.1

• Fixed an issue in invoking cp on Solaris.

renv 0.9.0

• renv gains a new function renv::record(), for recording new packages within an existing lockfile. This can be useful when one or more of the recorded packages need to be modified for some reason.

• An empty .renvignore no longer erroneously ignores all files within a directory. (#286)

• renv now warns if the version of renv loaded within a project does not match the version declared within the renv autoloader. (#285)

• renv gains a new function renv::run(), for running R scripts within a particular project's context inside an R subprocess. (#126)

• The algorithm used by renv for hashing packages has changed. Consider using renv::rehash() to migrate packages from the old renv cache to the new renv cache.

• renv::status() now reports packages which are referenced in your project code, but are not currently installed. (#271)

• renv is now able to restore packages with a recorded URL remote. (#272)

• renv::dependencies() can now parse R package dependencies used as custom site generator in an Rmd yaml header. (#269, @cderv)

• renv now properly respects a downloader requested by the environment variable RENV_DOWNLOAD_FILE_METHOD.

• renv no longer sources the user profile (normally located at ~/.Rprofile) by default. If you desire this behavior, you can opt-in by setting RENV_CONFIG_USER_PROFILE = TRUE; e.g. within your project or user .Renviron file. (#261)

• renv::restore() gains the packages argument, to be used to restore a subset of packages recorded within the lockfile. (#260)

• renv now tries harder to preserve the existing structure in infrastructure files (e.g. the project .Rprofile) that it modifies. (#259)

• renv now warns if any Bioconductor packages used in the project appear to be from a different Bioconductor release than the one currently active and stored in the lockfile. (#244)

• renv now normalizes any paths set in the RENV_PATHS_* family of environment variables when renv is loaded.

• Fixed an issue where renv would not properly clean up after a failed attempt to call Sys.junction(). (#251)

• Fixed an issue where renv would, in some cases, copy rather than link from the package cache when the library path had been customized with the RENV_PATHS_LIBRARY environment variable. (#245)

• The method renv uses when copying directories can now be customized. When copying directories, renv now by default uses robocopy on Windows, and cp on Unix. This should improve robustness when attempting to copy files in some contexts; e.g. when copying across network shares.

• renv now tracks the version of Bioconductor used within a project (if applicable), and uses that when retrieving the set of repositories to be used during renv::restore().

• renv::dependencies() can now parse R package dependencies declared and used by the modules package. (#238, @labriola)

• Fixed an issue where renv::restore() could fail in Docker environments, usually with an error message like 'Invalid cross-device link'. (#243)

• renv::install() disables staged package install when running with the Windows Subsystem for Linux. (#239)

renv 0.8.3

• renv::dependencies() gains a new argument dev, indicating whether development dependencies should also be included in the set of discovered package dependencies. By default, only runtime dependencies will be reported.

• renv has gained the function renv::diagnostics(), which can occasionally be useful in understanding and diagnosing renv (mis)behaviors.

• renv::equip() can now be used on macOS to install the R LLVM toolchain normally used when compiling packages from source. renv will also use this toolchain as appropriate when building packages from source.

• renv::install() now provides a custom Makevars when building packages on macOS with Apple Clang, to avoid issues due to the use of '-fopenmp' during compilation.

• renv::install() now respects explicit version requests when discovered in a project's DESCRIPTION file. (#233)

• Fixed an issue where renv:::actions() would fail to report any actions if the project lockfile was empty. (#232)

• When using renv for R package development, renv will no longer attempt to write the package being developed to the lockfile. (#231)

• Fixes for checks run on CRAN.

• renv will now search for Rtools in more locations. (#225)

• renv::load() now ensures that the version of renv associated with the loaded project is loaded when possible. In addition, experimental support for switching between projects with renv::load() has been implemented. (#229)

• renv::dependencies() no longer treats folders named with the extension .Rmd as though they were regular files. (#228)

• It is now possible to install source packages contained within .zip archives using renv::install().

• Fixed an issue where attempts to call renv::restore() with the path to the lockfile explicitly provided would fail. (#227)

renv 0.8.2

• Further fixes for checks run on CRAN.

renv 0.8.1

• Fixes for checks run on CRAN.

renv 0.8.0

• Initial CRAN release.

rstudio/renv documentation built on July 8, 2024, 5:48 a.m.