CompAREdesign: Time-to-event endpoints"

In CompAREdesign: Statistical Functions for the Design of Studies with Composite Endpoints

library('CompAREdesign')            # Load library
library('ggplot2')
knitr::opts_chunk$set(echo = TRUE)  # Show code

CompAREdesign R package allows the researchers to design a randomized clinical trial with a composite endpoint as the primary endpoint based solely on the information relative to its components.

Case study: ZODIAC Trial

This example is based on the data from the ZODIAC trial [1]. ZODIAC was a multinational, randomised, double-blind, phase 3 study of vandetanib plus docetaxel (Sanofi - Aventis, Paris, France) versus placebo plus docetaxel in patients with locally advanced or metastatic NCSLC after progression following platinum-based first-line chemotherapy. The recent approval and increasing use of pemetrexed as first-line therapy in NSCLC suggest a continuing role for docetaxel as second-line therapy.

We can use the information of this study to plan a new similar trial.

Input Parameters

First of all, the information for the components of the composite endpoint should be defined based on the information obtained from the ZODIAC trial.

## Probabilities of observing the event in control arm during follow-up
p0_e1 <- 0.59   # Death
p0_e2 <- 0.74   # Disease Progression  

## Effect size (Cause specific hazard ratios) for each endpoint
HR_e1 <- 0.91   # Death
HR_e2 <- 0.77   # Disease Progression

## Hazard rates over time
beta_e1 <- 2    # Death --> Increasing risk over time
beta_e2 <- 1    # Disease Progression --> Constant risk over time

## Correlation
rho      <- 0.1        # Correlation between components
rho_type <- 'Spearman' # Type of correlation measure
copula   <- 'Frank'    # Copula used to get the joint distribution

## Additional parameter
case  <- 3  # 1: No deaths;                  2: Death is the secondary event; 
            # 3: Death is the primary event; 4: Both events are death by different causes

We set case = 3 because Death is the primary event:

• Endpoint 1: Death

• Endpoint 2: Disease progression

The meaning of all the parameters are described in the following table:

+-------------+-----------------------------------------------------------------------+ | Parameter | Description | +:============+:======================================================================+ | p0_e1 | Probability of observing event 1 in control arm during follow-up | +-------------+-----------------------------------------------------------------------+ | p0_e2 | Probability of observing event 2 in control arm during follow-up | +-------------+-----------------------------------------------------------------------+ | HR_e1 | Effect size (Cause specific hazard ratios) for endpoint 1 | +-------------+-----------------------------------------------------------------------+ | HR_e2 | Effect size (Cause specific hazard ratios) for endpoint 2 | +-------------+-----------------------------------------------------------------------+ | beta_e1 | Hazard rate over time for endpoint 1 (>1: Increasing risk over time) | +-------------+-----------------------------------------------------------------------+ | beta_e2 | Hazard rate over time for endpoint 2 (=1: Constant risk over time) | +-------------+-----------------------------------------------------------------------+ | rho | Correlation between components | +-------------+-----------------------------------------------------------------------+ | rho_type | Type of the correlation measure | +-------------+-----------------------------------------------------------------------+ | copula | Copula used to get the joint distribution | +-------------+-----------------------------------------------------------------------+ | case | Additional parameter: | | | | | | 1. No deaths | | | | | | 2. Death is the secondary event | | | | | | 3. Death is the primary event; | | | | | | 4. Both events are death by different causes | +-------------+-----------------------------------------------------------------------+

ARE: Asymptotic Relatively Efficiency

We are considering probabilities in the control group of 0.59 and 0.74, with treatment effects given by Hazard Ratios of 0.91 and 0.77 for Endpoints 1 and 2, respectively. If the correlation between the times of both components is low (e.g., 0.1), the Asymptotic Relative Efficiency (ARE) is 8.79.

Since the ARE is greater than 1, it is recommended to use the composite endpoint (CE), which combines both endpoints, as the primary endpoint of the trial. In other words, for a given significance level and power, the number of required events needed to attain the same power would be 8.79 times higher if Endpoint 1 were used instead of CE.

In this case if we are not sure about the value of the correlation between components, it is not a problem because using the CE as the primary endpoint results in a more statistically efficient trial design regardless of the correlation ρ because ARE(ρ) > 1.

ARE_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
        HR_e1   = HR_e1    , HR_e2    = HR_e2, 
        beta_e1 = beta_e1  , beta_e2  = beta_e2,  
        rho     = rho      , rho_type = rho_type, 
        copula  = copula   , case     = case,
        plot_print = TRUE) 

Effect size of the Composite Endpoint

The function effectsize_tte provides several summary measures of the treatment effect:

• gAHR (Geometric Average Hazard Ratio)
• AHR (Geometric Average Hazard Ratio)
• RMST Ratio (Restricted Mean Survival Time Ratio)
• Median Ratio (Median survival time ratio)

In addition, several measures of the behavior within each group are provided:

• RMST (Restricted Mean Survival Time)
• Median (Median survival time)
• Prob. E1 (Probability of observing endpoint 1)
• Prob. E2 (Probability of observing endpoint 2)
• Prob. CE (Probability of observing composite endpoint)

effectsize_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
               HR_e1   = HR_e1    , HR_e2    = HR_e2, 
               beta_e1 = beta_e1  , beta_e2  = beta_e2,  
               rho     = rho      , rho_type = rho_type, 
               copula  = copula   , case     = case,
               plot_print = TRUE) 

In the figure above, a slight increase in the HR of the CE is observed over time.

Sample size

samplesize_tte provides the required number of patients for the trial using the CE as the primary endpoint as well as the sample size for each component. In our case study, the sample size using the CE would be 1118.

samplesize_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
               HR_e1   = HR_e1    , HR_e2    = HR_e2, 
               beta_e1 = beta_e1  , beta_e2  = beta_e2,  
               rho     = rho      , rho_type = rho_type, 
               copula  = copula   , case     = case, 
               alpha   = 0.025    , power    = 0.90,
               ss_formula = 'schoenfeld', 
               plot_print = TRUE) 

The required sample size for a trial with the composite endpoint (CE) as the primary endpoint depends on the correlation ρ. In general, as the correlation increases, the sample size also increases. The observed reduction in sample size for high correlations occurs because, if the proportion of observed events is kept constant, events in the second component must almost entirely occur before the end of the follow-up period. This is necessary to prevent them from being unobserved due to the occurrence of the first competitive event.

Influence of hazards rates over time on the effect size

The impact of hazard rate behavior over time on the treatment effect can be analyzed using the function effectsize_tte. The parameters beta_1 ($\beta_1$) and beta_2 ($\beta_2$) represent the shape parameters of the Weibull marginal distributions for each component. A value of $\beta_i > 1$ indicates an increasing risk over time, while $\beta_i < 1$ represents a decreasing risk, and $\beta_i = 1$ corresponds to a constant risk over time.

To examine how this parameter influences the treatment effect of the CE, the HR of the CE is plotted over time. When both risks are constant, the HR is almost constant, while when there is an increasing risk of disease progression over time, the HR decreases over time.

## Hazards' rates over time Scenario 1
beta_e1 <- 1    # Death               --> CONSTANT over time
beta_e2 <- 2    # Disease Progression --> INCREASE over time
effectsize_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
               HR_e1   = HR_e1    , HR_e2    = HR_e2, 
               beta_e1 = beta_e1  , beta_e2  = beta_e2,  
               rho     = rho      , rho_type = rho_type, 
               copula  = copula   , case     = case, 
               plot_print = TRUE) 

## Hazards' rates over time Scenario 2
beta_e1 <- 1    # Death               --> CONSTANT over time
beta_e2 <- 1    # Disease Progression --> CONSTANT over time
effectsize_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
               HR_e1   = HR_e1    , HR_e2    = HR_e2, 
               beta_e1 = beta_e1  , beta_e2  = beta_e2,  
               rho     = rho      , rho_type = rho_type, 
               copula  = copula   , case     = case, 
               plot_print = TRUE) 

Summary plots

plot_tte returns all the relevant plots for the trial design if summary=TRUE.

plot_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
         HR_e1   = HR_e1    , HR_e2    = HR_e2, 
         beta_e1 = beta_e1  , beta_e2  = beta_e2,  
         rho     = rho      , rho_type = rho_type, 
         copula  = copula   , case     = case, 
         summary = TRUE) 

If summary=FALSE, you can select the plot to generate among different options (survival, effect, ARE, or samplesize) and further customize it as needed.

plot_tte(p0_e1   = p0_e1    , p0_e2    = p0_e2, 
         HR_e1   = HR_e1    , HR_e2    = HR_e2, 
         beta_e1 = beta_e1  , beta_e2  = beta_e2,  
         rho     = rho      , rho_type = rho_type, 
         copula  = copula   , case     = case, 
         summary = FALSE    , type     = 'ARE') + 
  ggtitle('Asymptotic Relative Efficiency') + theme_bw()

References

1. Herbst RS, Sun Y, Eberhardt WEE, Germonpré P, Saijo N, Zhou C et al. Vandetanib plus docetaxel versus docetaxel as second-line treatment for patients with advanced non-small-cell lung cancer (ZODIAC): a double-blind, randomised, phase 3 trial. Lancet Oncol. 2010;11(7):619–26.

rm(list = ls())

CompAREdesign documentation built on April 4, 2025, 1:11 a.m.