An example of variable selection in `GLMcat`"

This vignette we will explore different models, evaluate their performance using Akaike Information Criterion (AIC), and select the best model based on AIC values.

For the models using the Student CDF and the Logistic CDF, we start by defining the full model formula as choice ~ hinc[air] + psize[air] + gc + ttme. We then fit the full model using discrete_cm and calculate its AIC. Additionally, we fit an intercept-only model and compare its AIC with that of the full model to determine if the full model provides a better fit.

Next, we perform backward elimination to simplify the full model by iteratively removing one predictor at a time. We fit reduced models for each predictor elimination and store the best model and its AIC value. After completing the backward elimination, we obtain the final model that offers the best fit based on AIC.

# Load required packages
library(GLMcat)

# Load the data
data(TravelChoice)

# Define the full model formula
full_model_formula <- choice ~ hinc[air] + psize[air] + gc + ttme

Student CDF

Model Selection Algorithm:

Step 1: Fit Model 0 - Intercept Model (AIC0) This model assumes a constant intercept. It serves as the baseline for model comparison.

mod0 <- discrete_cm(
  formula = choice ~ 1,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod0 <- AIC(mod0)

Step 2: Fit Model 1.1 - Intercept + Hinc (AIC1.1) This model includes the variable 'hinc' as a predictor in addition to the intercept.

mod11 <- discrete_cm(
  formula = choice ~ hinc[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod11 <- AIC(mod11)

Step 3: Fit Model 1.2 - Intercept + Psize (AIC1.2) This model includes the variable 'psize' as a predictor in addition to the intercept.

mod12 <- discrete_cm(
  formula = choice ~ psize[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod12 <- AIC(mod12)

Step 4: Fit Model 1.3 - Intercept + GC (AIC1.3) This model includes the variable 'gc' as a predictor in addition to the intercept.

mod13 <- discrete_cm(
  formula = choice ~ gc,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod13 <- AIC(mod13)

Step 5: Fit Model 1.4 - Intercept + Ttime (AIC1.4) This model includes the variable 'ttme' as a predictor in addition to the intercept.

mod14 <- discrete_cm(
  formula = choice ~ ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod14 <- AIC(mod14)

Step 6: Select the model with the minimum AIC value from the first set of models (AIC1)

aic_values_1 <- c(aicmod11, aicmod12, aicmod13, aicmod14)
AIC1 <- min(aic_values_1)
which_min_AIC1 <- which.min(aic_values_1)
which_min_AIC1

Step 7: Check if AIC1 is smaller than AIC0 to decide whether to continue with Model 2

AIC0_is_smaller_than_AIC1 <- AIC1 < aicmod0
AIC0_is_smaller_than_AIC1

Step 8: Fit Model 2.1 - Intercept + Ttime + Hinc (AIC2.1) This model includes 'ttme' and 'hinc' as additional predictors along with the intercept.

mod21 <- discrete_cm(
  formula = choice ~ hinc[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod21 <- AIC(mod21)

Step 9: Fit Model 2.2 - Intercept + Ttime + Psize (AIC2.2) This model includes 'ttme' and 'psize' as additional predictors along with the intercept.

mod22 <- discrete_cm(
  formula = choice ~ psize[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod22 <- AIC(mod22)

Step 10: Fit Model 2.3 - Intercept + Ttime + GC (AIC2.3) This model includes 'ttme' and 'gc' as additional predictors along with the intercept.

mod23 <- discrete_cm(
  formula = choice ~ gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmod23 <- AIC(mod23)

Step 11: Select the model with the minimum AIC value from the second set of models (AIC2)

aic_values_2 <- c(aicmod21, aicmod22, aicmod23)
AIC2 <- min(aic_values_2)
which_min_AIC2 <- which.min(aic_values_2)
which_min_AIC2

Step 12: Check if AIC2 is greater than AIC1 to decide whether to stop the algorithm

AIC2_is_greater_than_AIC1 <- AIC2 > AIC1
AIC2_is_greater_than_AIC1

We then stop here and select only Ttme as the nly explanatory variable.

Backward Algorithm: Starting from choice \~ hinc[air] + psize[air] + gc + ttme, eliminate one predictor at a time and compare AIC values Step 13: Fit Model with all predictors (hinc[air], psize[air], gc, ttme)

modc0 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc0 <- AIC(modc0)

Step 14-16: Fit Model without predictors hinc[air], psize[air], and gc

modc11 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + gc,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc11 <- AIC(modc11)


modc12 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc12 <- AIC(modc12)


modc13 <- discrete_cm(
  formula = choice ~ hinc[air] + gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc13 <- AIC(modc13)

Step 17: Select the model with the minimum AIC value among the backward models (AICC1)

aic_values_backward <- c(aicmodc11, aicmodc12, aicmodc13)
AICC1 <- min(aic_values_backward)
which_min_AICC1 <- which.min(aic_values_backward)
which_min_AICC1
AICC1_is_smaller_than_all_predictors <- AICC1 < aicmodc0
AICC1_is_smaller_than_all_predictors

Step 18-20: Continue the backward algorithm Fit Model

modc21 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc21 <- AIC(modc21)

modc22 <- discrete_cm(
  formula = choice ~ hinc[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc22 <- AIC(modc22)

modc23 <- discrete_cm(
  formula = choice ~ psize[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc23 <- AIC(modc23)

Step 21: Select the model with the minimum AIC value among the backward models (AICC2)

aic_values_backward_2 <- c(aicmodc21, aicmodc22, aicmodc23)
AICC2 <- min(aic_values_backward_2)
which_min_AICC2 <- which.min(aic_values_backward_2)
which_min_AICC2
AICC2_is_smaller_than_AICC1 <- AICC2 < AICC1
AICC2_is_smaller_than_AICC1

Step 22-23: Continue the backward algorithm Fit Model

modc31 <- discrete_cm(
  formula = choice ~ psize[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc31 <- AIC(modc31)

modc32 <- discrete_cm(
  formula = choice ~ ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = list("student"),
  find_nu = TRUE
)
aicmodc32 <- AIC(modc32)

Step 24: Select the model with the minimum AIC value among the backward models (AICC3)

aic_values_backward_3 <- c(aicmodc31, aicmodc32)
AICC3 <- min(aic_values_backward_3)
which_min_AICC3 <- which.min(aic_values_backward_3)
which_min_AICC3
AICC3_is_smaller_than_AICC2 <- AICC3 < AICC2
AICC3_is_smaller_than_AICC2

Best performance for Model with ttme as the only predictor

Logistic CDF

Step 0: Model 0 - Intercept Model (AIC0)

mod0 <- discrete_cm(
  formula = choice ~ 1,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = "logistic"
)
mod0$cdf
aicmod0 <- AIC(mod0)

Step 1: Model 1.1 - Intercept + Hinc (AIC1.1)

mod11 <- discrete_cm(
  formula = choice ~ hinc[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = "logistic"
)
mod11$cdf
aicmod11 <- AIC(mod11)

Step 2: Model 1.2 - Intercept + Psize (AIC1.2)

mod12 <- discrete_cm(
  formula = choice ~ psize[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  data = TravelChoice,
  cdf = "logistic"
)
mod12$cdf
aicmod12 <- AIC(mod12)

Step 3: Model 1.3 - Intercept + GC (AIC1.3)

mod13 <- discrete_cm(
  formula = choice ~ gc,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc"),
  data = TravelChoice,
  cdf = "logistic"
)
mod13$cdf
aicmod13 <- AIC(mod13)

Step 4: Model 1.4 - Intercept + Ttime (AIC1.4)

mod14 <- discrete_cm(
  formula = choice ~ ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
mod14$cdf
aicmod14 <- AIC(mod14)

Step 5: Select the model with the minimum AIC value from the first set of models (AIC1)

aic_values_1 <- c(aicmod11, aicmod12, aicmod13, aicmod14)
AIC1 <- min(aic_values_1)
which_min_AIC1 <- which.min(aic_values_1)
which_min_AIC1

Step 6: Check if AIC1 is smaller than AIC0 to decide whether to continue with Model 2

AIC0_is_smaller_than_AIC1 <- AIC1 < aicmod0
AIC0_is_smaller_than_AIC1

Step 7: Model 2.1 - Intercept + Ttime + Hinc (AIC2.1)

mod21 <- discrete_cm(
  formula = choice ~ hinc[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod21 <- AIC(mod21)

Step 8: Model 2.2 - Intercept + Ttime + Psize (AIC2.2)

mod22 <- discrete_cm(
  formula = choice ~ psize[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod22 <- AIC(mod22)

Step 9: Model 2.3 - Intercept + Ttime + GC (AIC2.3)

mod23 <- discrete_cm(
  formula = choice ~ gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod23 <- AIC(mod23)

Step 10: Select the model with the minimum AIC value from the second set of models (AIC2)

aic_values_2 <- c(aicmod21, aicmod22, aicmod23)
AIC2 <- min(aic_values_2)
which_min_AIC2 <- which.min(aic_values_2)
which_min_AIC2

Step 11: Check if AIC2 is greater than AIC1 to decide whether to stop the algorithm

AIC2_is_greater_than_AIC1 <- AIC2 > AIC1
AIC2_is_greater_than_AIC1

Step 12: Model 2.3.1 - Intercept + Ttime + GC + Hinc (AIC2.3.1)

mod231 <- discrete_cm(
  formula = choice ~ gc + ttme + hinc[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod231 <- AIC(mod231)

Step 13: Model 2.3.2 - Intercept + Ttime + GC + Psize (AIC2.3.2)

mod232 <- discrete_cm(
  formula = choice ~ gc + ttme + psize[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod232 <- AIC(mod232)

Step 14: Select the model with the minimum AIC value among the additional models (AIC3)

AIC3 <- min(aicmod231, aicmod232)
which_min_AIC3 <- which.min(c(aicmod231, aicmod232))
which_min_AIC3
AIC3_is_smaller_than_AIC2 <- AIC3 < AIC2
AIC3_is_smaller_than_AIC2

Step 15: Model 2.3.2.1 - Intercept + Ttime + GC + Psize + Hinc (AIC2.3.2.1)

mod2321 <- discrete_cm(
  formula = choice ~ gc + ttme + psize[air] + hinc[air],
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)
aicmod2321 <- AIC(mod2321)

Step 16: Check if the AIC of Model 2.3.2.1 is smaller than AIC3

aicmod2321_is_smaller_than_AIC3 <- aicmod2321 < AIC3
aicmod2321_is_smaller_than_AIC3

We obtain then the full model with the logistic CDF

Step 17: Backwards algorithm, starting with choice \~ hinc[air] + psize[air] + gc + ttme

modc0 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)

aicmodc0 <- AIC(modc0)
aicmodc0

modc11 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + gc,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc"),
  data = TravelChoice,
  cdf = "logistic"
)

aicmodc11 <- AIC(modc11)

modc12 <- discrete_cm(
  formula = choice ~ hinc[air] + psize[air] + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("ttme"),
  data = TravelChoice,
  cdf = "logistic"
)

aicmodc12 <- AIC(modc12)

modc13 <- discrete_cm(
  formula = choice ~ hinc[air] + gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)

aicmodc13 <- AIC(modc13)

modc14 <- discrete_cm(
  formula = choice ~ psize[air] + gc + ttme,
  case_id = "indv",
  alternatives = "mode",
  reference = "car",
  alternative_specific = c("gc", "ttme"),
  data = TravelChoice,
  cdf = "logistic"
)

aicmodc14 <- AIC(modc14)

Step 18: Select the model with the minimum AIC value among the backward models (AICC1)

aic_values_backward <- c(aicmodc11, aicmodc12, aicmodc13, aicmodc14)
AICC1 <- min(aic_values_backward)
which_min_AICC1 <- which.min(aic_values_backward)
which_min_AICC1
AICC1_is_smaller_than_aicmodc0 <- AICC1 < aicmodc0
AICC1_is_smaller_than_aicmodc0

We obtain again the full model



Try the GLMcat package in your browser

Any scripts or data that you put into this service are public.

GLMcat documentation built on May 29, 2024, 10:04 a.m.