detect_event: Detect heatwaves and cold-spells.

Description Usage Arguments Details Value Author(s) References Examples

View source: R/detect_event.R

Description

Applies the Hobday et al. (2016) marine heat wave definition to an input time series of a given value (usually, but not necessarily limited to, temperature) along with a daily date vector and pre-calculated seasonal and threshold climatologies, which may either be created with ts2clm or some other means.

Usage

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
detect_event(
  data,
  x = t,
  y = temp,
  seasClim = seas,
  threshClim = thresh,
  threshClim2 = NA,
  minDuration = 5,
  minDuration2 = minDuration,
  joinAcrossGaps = TRUE,
  maxGap = 2,
  maxGap2 = maxGap,
  coldSpells = FALSE,
  protoEvents = FALSE,
  categories = FALSE,
  roundRes = 4,
  ...
)

Arguments

data

A data frame with at least four columns. In the default setting (i.e. omitting the arguments x, y, seas, and thresh; see immediately below), the data set is expected to have the headers t, temp, seas, and thresh. The t column is a vector of dates of class Date, temp is the measured variable (by default it is assumed to be temperature), seas is the seasonal cycle daily climatology (366 days), and thresh is the seasonal cycle daily threshold above which events may be detected. Data of the appropriate format are created by the function ts2clm, but your own data can be supplied if they meet the criteria specified by ts2clm. If the column names of data match those outlined here, the following four arguments may be ignored.

x

This column is expected to contain a vector of dates as per the specification of ts2clm. If a column headed t is present in the dataframe, this argument may be omitted; otherwise, specify the name of the column with dates here.

y

This is a column containing the measurement variable. If the column name differs from the default (i.e. temp), specify the name here.

seasClim

The dafault for this argument assumes that the seasonal climatology column is called seas as this matches the output of ts2clm. If the column name for the seasonal climatology is different, provide that here.

threshClim

The threshold climatology column should be called thresh. If it is not, provide the name of the threshold column here.

threshClim2

If one wishes to provide a second climatology threshold filter for the more rigorous detection of events, a vector or column containing logical values (i.e. TRUE FALSE) should be provided here. By default this argument is ignored. It's primary purpose is to allow for the inclusion of tMin and tMax thresholds.

minDuration

The minimum duration for acceptance of detected events. The default is 5 days.

minDuration2

The minimum duration for acceptance of events after filtering by threshClim and threshClim. By default minDuration2 = minDuration and is ignored if threshClim2 has not been specified.

joinAcrossGaps

Boolean switch indicating whether to join events which occur before/after a short gap as specified by maxGap. The default is TRUE.

maxGap

The maximum length of gap allowed for the joining of MHWs. The default is 2 days.

maxGap2

The maximum gap length after applying both thresholds. By default maxGap2 = maxGap and is ignored if threshClim2 has not been specified.

coldSpells

Boolean specifying if the code should detect cold events instead of warm events. The default is FALSE. Please note that the climatological thresholds for cold-spells are considered to be the inverse of those for MHWs. For example, the default setting for the detection of MHWs is pctile = 90, as seen in ts2clm. Should one want to use detect_event for MCSs, this threshold would best be generated in ts2clm by setting pctile = 10 (see example below). Any value may be used, but this is the setting used for the calculation of MCSs in Schlegel et al. (2017a).

protoEvents

Boolean specifying whether the full time series must be returned as a long table, together with columns indicating whether or not the threshold criterion (threshCriterion) and duration criterion (durationCriterion) have been exceeded, a column showing if a heatwave is present (i.e. both threshCriterion and durationCriterion TRUE), and a sequential number uniquely identifying the detected event. In this case, the heatwave metrics will not be reported. The default is FALSE.

categories

Rather than using category as a separate step to determine the categories of the detected MHWs, one may choose to set this argument to TRUE. One may pass the same arguments used in the category function to this function to affect the output. Note that the default behaviour of category is to return the event data only. To return the same list structure that detect_event outputs by default, use climatology = TRUE.

roundRes

This argument allows the user to choose how many decimal places the MHW metric outputs will be rounded to. Default is 4. To prevent rounding set roundRes = FALSE. This argument may only be given numeric values or FALSE.

...

Other arguments that will be passed internally to category when categories = TRUE. See the documentation for category for the list of possible arguments.

Details

  1. This function assumes that the input time series consists of continuous daily values with few missing values. Time ranges which start and end part-way through the calendar year are supported. The accompanying function ts2clm aids in the preparation of a time series that is suitable for use with detect_event, although this may also be accomplished 'by hand' as long as the criteria are met as discussed in the documentation to ts2clm.

  2. The calculation of onset and decline rates assumes that the events started a half-day before the start day and ended a half-day after the end-day. This is consistent with the duration definition as implemented, which assumes duration = end day - start day + 1. An event that is already present at the beginning of a time series, or an event that is still present at the end of a time series, will report the rate of onset or the rate of decline as NA, as it is impossible to know what the temperature half a day before or after the start or end of the event is.

  3. For the purposes of event detection, any missing temperature values not interpolated over (through optional maxPadLength in ts2clm) will be set equal to the seasonal climatology. This means they will trigger the end/start of any adjacent temperature values which satisfy the event definition criteria.

  4. If the code is used to detect cold events (coldSpells = TRUE), then it works just as for heat waves except that events are detected as deviations below the (100 - pctile)th percentile (e.g., the 10th instead of 90th) for at least 5 days. Intensities are reported as negative values and represent the temperature anomaly below climatology.

The original Python algorithm was written by Eric Oliver, Institute for Marine and Antarctic Studies, University of Tasmania, Feb 2015, and is documented by Hobday et al. (2016). The marine cold spell option was implemented in version 0.13 (21 Nov 2015) of the Python module as a result of our preparation of Schlegel et al. (2017), wherein the cold events receive a brief overview.

Value

The function will return a list of two tibbles (see the tidyverse), climatology and event, which are, surprisingly, the climatology and event results, respectively. The climatology contains the full time series of daily temperatures, as well as the the seasonal climatology, the threshold and various aspects of the events that were detected. The software was designed for detecting extreme thermal events, and the units specified below reflect that intended purpose. However, various other kinds of extreme events may be detected according to the specifications, and if that is the case, the appropriate units need to be determined by the user.

The climatology results will contain the same column produced by ts2clm as well as the following:

threshCriterion

Boolean indicating if temp exceeds thresh.

durationCriterion

Boolean indicating whether periods of consecutive threshCriterion are >= min_duration.

event

Boolean indicating if all criteria that define an extreme event are met.

event_no

A sequential number indicating the ID and order of occurrence of the events.

intensity

The difference between temp (or whichever column is provided for y) and seas. Only added if categories = TRUE and climatology = TRUE.

category

The category classification per day. Only added if categories = TRUE and climatology = TRUE.

The event results are summarised using a range of event metrics:

event_no

A sequential number indicating the ID and order of the events.

index_start

Start index of event.

index_end

End index of event.

duration

Duration of event [days].

date_start

Start date of event [date].

date_end

End date of event [date].

date_peak

Date of event peak [date].

intensity_mean

Mean intensity [deg. C].

intensity_max

Maximum (peak) intensity [deg. C].

intensity_var

Intensity variability (standard deviation) [deg. C].

intensity_cumulative

Cumulative intensity [deg. C x days].

rate_onset

Onset rate of event [deg. C / day].

rate_decline

Decline rate of event [deg. C / day].

event_name

The name of the event. Generated from the name value provided and the year of the date_peak of the event. If no name value is provided the default "Event" is used. As proposed in Hobday et al. (2018), Moderate events are not given a name so as to prevent multiple repeat names within the same year. If two or more events ranked greater than Moderate are reported within the same year, they will be differentiated with the addition of a trailing letter (e.g. Event 2001a, Event 2001b). Only added if categories = TRUE.

category

The maximum category threshold reached/exceeded by the event. Only added if categories = TRUE.

p_moderate

The proportion of the total duration (days) spent at or above the first threshold, but below any further thresholds. Only added if categories = TRUE.

p_strong

The proportion of the total duration (days) spent at or above the second threshold, but below any further thresholds. Only added if categories = TRUE.

p_severe

The proportion of the total duration (days) spent at or above the third threshold, but below the fourth threshold. Only added if categories = TRUE.

p_extreme

The proportion of the total duration (days) spent at or above the fourth and final threshold. Only added if categories = TRUE.

season

The season(s) during which the event occurred. If the event occurred across two seasons this will be displayed as e.g. "Winter/Spring". Across three seasons as e.g. "Winter-Summer". Events lasting across four or more seasons are listed as "Year-round". December (June) is used here as the start of Austral (Boreal) summer. If "start", "peak", or "end" was given to the season argument then only the one season during that chosen period will be given. Only added if categories = TRUE.

intensity_max_relThresh, intensity_mean_relThresh, intensity_var_relThresh, and intensity_cumulative_relThresh are as above except relative to the threshold (e.g., 90th percentile) rather than the seasonal climatology.

intensity_max_abs, intensity_mean_abs, intensity_var_abs, and intensity_cumulative_abs are as above except as absolute magnitudes rather than relative to the seasonal climatology or threshold.

Note that rate_onset and rate_decline will return NA when the event begins/ends on the first/last day of the time series. This may be particularly evident when the function is applied to large gridded data sets. Although the other metrics do not contain any errors and provide sensible values, please take this into account in its interpretation.

Author(s)

Albertus J. Smit, Robert W. Schlegel, Eric C. J. Oliver

References

Hobday, A.J. et al. (2016). A hierarchical approach to defining marine heatwaves, Progress in Oceanography, 141, pp. 227-238, doi:10.1016/j.pocean.2015.12.014

Schlegel, R. W., Oliver, C. J., Wernberg, T. W., Smit, A. J. (2017). Nearshore and offshore co-occurrences of marine heatwaves and cold-spells. Progress in Oceanography, 151, pp. 189-205, doi:10.1016/j.pocean.2017.01.004

Examples

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
res_clim <- ts2clm(sst_WA, climatologyPeriod = c("1983-01-01", "2012-12-31"))
out <- detect_event(res_clim)
# show a portion of the climatology:
out$climatology[1:10, ]
# show some of the heat waves:
out$event[1:5, 1:10]

# Or if one wants to calculate MCSs
res_clim <- ts2clm(sst_WA, climatologyPeriod = c("1983-01-01", "2012-12-31"),
                   pctile = 10)
out <- detect_event(res_clim, coldSpells = TRUE)
# show a portion of the climatology:
out$climatology[1:10, ]
# show some of the cold-spells:
out$event[1:5, 1:10]

# It is also possible to calculate the categories of events directly
# See the \code{\link{category}} documentation for more functionality
res_clim <- ts2clm(sst_WA, climatologyPeriod = c("1983-01-01", "2012-12-31"))
out_event <- detect_event(res_clim, categories = TRUE)
out_list <- detect_event(res_clim, categories = TRUE, climatology = TRUE)

# It is also possible to give two separate sets of threshold criteria

# To use a second static threshold we first use the exceedance function
thresh_19 <- exceedance(sst_Med, threshold = 19, minDuration = 10, maxGap = 0)$threshold
# Then we use that output when detecting our events
events_19 <- detect_event(ts2clm(sst_Med, climatologyPeriod = c("1982-01-01", "2011-12-31")),
                         threshClim2 = thresh_19$exceedance, minDuration2 = 10, maxGap2 = 0)

# If we want to use two different percentile thresholds we use detect_event
thresh_95 <- detect_event(ts2clm(sst_Med, pctile = 95,
                                 climatologyPeriod = c("1982-01-01", "2011-12-31")),
                          minDuration = 2, maxGap = 0)$climatology
# Then we use that output when detecting our events
events_95 <- detect_event(ts2clm(sst_Med, climatologyPeriod = c("1982-01-01", "2011-12-31")),
                          threshClim2 = thresh_95$event, minDuration2 = 2, maxGap2 = 0)

heatwaveR documentation built on Oct. 27, 2021, 5:08 p.m.