calibPop: Calibration of 0/1 weights by Simulated Annealing

In simPop: Simulation of Complex Synthetic Data Information

Calibration of 0/1 weights by Simulated Annealing

Description

A Simulated Annealing Algorithm for calibration of synthetic population data available in a simPopObj-object. The aims is to find, given a population, a combination of different households which optimally satisfy, in the sense of an acceptable error, a given table of specific known marginals. The known marginals are also already available in slot 'table' of the input object 'inp'.

Usage

calibPop(
  inp,
  split = NULL,
  splitUpper = NULL,
  temp = 1,
  epsP.factor = 0.05,
  epsH.factor = 0.05,
  epsMinN = 0,
  maxiter = 200,
  temp.cooldown = 0.9,
  factor.cooldown = 0.85,
  min.temp = 10^-3,
  nr_cpus = NULL,
  sizefactor = 2,
  choose.temp = TRUE,
  choose.temp.factor = 0.2,
  scale.redraw = 0.5,
  observe.times = 50,
  observe.break = 0.05,
  n.forceCooldown = 100,
  verbose = FALSE,
  hhTables = NULL,
  persTables = NULL,
  redist.var = NULL,
  redist.var.factor = 1
)

Arguments

inp	an object of class simPopObj with slot 'table' being non-null! (see addKnownMargins).
split	given strata in which the problem will be split. Has to correspond to a column population data (slot 'pop' of input argument 'inp') . For example split = (c("region"), problem will be split for different regions. Parallel computing is performed automatically, if possible.
splitUpper	optional column in the population for which decides the part of the population from which to sample for each entry in split. Has to correspond to a column population data (slot 'pop' of input argument 'inp'). For example split = c("region"), splitUpper = c("Country") all units from the country are eligable for donor sample when problem is split into regions. Is usefull if simInitSpatial() was used and the variable to split the problem into results in very small groups (~couple of hundreds to thousands).
temp	starting temperatur for simulated annealing algorithm
epsP.factor	a factor (between 0 and 1) specifying the acceptance error for contingency table on individual level. For example epsP.factor = 0.05 results in an acceptance error for the objective function of 0.05*sum(People).
epsH.factor	a factor (between 0 and 1) specifying the acceptance error for contingency table on household level. For example epsH.factor = 0.05 results in an acceptance error for the objective function of 0.05*sum(Households).
epsMinN	integer specifying the minimum number of units from which the synthetic populatin can deviate from cells in contingency tables. This overwrites epsP.factor and epsH.factor. Is especially usefull if cells in hhTables and persTables are very small, e.g. <10.
maxiter	maximum iterations during a temperature step.
temp.cooldown	a factor (between 0 and 1) specifying the rate at which temperature will be reduced in each step.
factor.cooldown	a factor (between 0 and 1) specifying the rate at which the number of permutations of housholds, in each iteration, will be reduced in each step.
min.temp	minimal temperature at which the algorithm will stop.
nr_cpus	if specified, an integer number defining the number of cpus that should be used for parallel processing.
sizefactor	the factor for inflating the population before applying 0/1 weights
choose.temp	if TRUE temp will be rescaled according to eps and choose.temp.factor. eps is defined by the product between epsP.factor and epsP.factor with the sum over the target population margins supplied by addKnownMargins or hhTables and persTables.
choose.temp.factor	number between (0,1) for rescaling temp for simulated annealing. temp redefined bymax(temp,eps*choose.temp.factor). Can be usefull if simulated annealing is split into subgroups with considerably different population sizes. Only used if choose.temp=TRUE.
scale.redraw	Number between (0,1) scaling the number of households that need to be drawn and discarded in each iteration step. The number of individuals currently selected through simulated annealing is substracted from the sum over the target population margins added to inp via addKnownMargins. This difference is divided by the median household size resulting in an estimated number of housholds that the current synthetic population differs from the population margins (~redraw_gap). The next iteration will then adjust the number of housholds to be drawn or discarded (redraw) according to max(ceiling(redraw-redraw_gap*scale.redraw),1) or max(ceiling(redraw+redraw_gap*scale.redraw),1) respectively. This keeps the number of individuals in the synthetic population relatively stable regarding the population margins. Otherwise the synthetic population might be considerably larger or smaller then the population margins, through selection of many large or small households.
observe.times	Number of times the new value of the objective function is saved. If observe.times=0 values are not saved.
observe.break	When objective value has been saved observe.times-times the coefficient of variation is calculated over saved values; if the coefficient of variation falls below observe.break simmulated annealing terminates. This repeats for each new set of observe.times new values of the objecive function. Can help save run time if objective value does not improve much. Disable this termination by either setting observe.times=0 or observe.break=0.
n.forceCooldown	integer, if the solution does not move for n.forceCooldown iterations then a cooldown is automatically done.
verbose	boolean variable; if TRUE some additional verbose output is provided, however only if split is NULL. Otherwise the computation is performed in parallel and no useful output can be provided.
hhTables	information on population margins for households
persTables	information on population margins for persons
redist.var	single column in the population which can be redistributed in each 'split'. Still experimental!
redist.var.factor	numeric in the interval (0,1]. Used in combinationo with 'redist.var', still experimental!

Details

Calibrates data using simulated annealing. The algorithm searches for a (near) optimal combination of different households, by swaping housholds at random in each iteration of each temperature level. During the algorithm as well as for the output the optimal (or so far best) combination will be indicated by a logical vector containg only 0s (not inculded) and 1s (included in optimal selection). The objective function for simulated annealing is defined by the sum of absolute differences between target marginals and synthetic marginals (=marginals of synthetic dataset). The sum of target marginals can at most be as large as the sum of target marginals. For every factor-level in “split”, data must at least contain as many entries of this kind as target marginals.

Possible donors are automatically generated within the procedure.

The number of cpus are selected automatically in the following manner. The number of cpus is equal the number of strata. However, if the number of cpus is less than the number of strata, the number of cpus - 1 is used by default. This should be the best strategy, but the user can also overwrite this decision.

Value

Returns an object of class simPopObj with an updated population listed in slot 'pop'.

Author(s)

Bernhard Meindl, Johannes Gussenbauer and Matthias Templ

References

M. Templ, B. Meindl, A. Kowarik, A. Alfons, O. Dupriez (2017) Simulation of Synthetic Populations for Survey Data Considering Auxiliary Information. Journal of Statistical Survey, 79 (10), 1–38. doi: 10.18637/jss.v079.i10

Examples

data(eusilcS) # load sample data
data(eusilcP) # population data
## Not run: 
inp <- specifyInput(data=eusilcS, hhid="db030", hhsize="hsize", strata="db040", weight="db090")
simPop <- simStructure(data=inp, method="direct", basicHHvars=c("age", "rb090"))
simPop <- simCategorical(simPop, additional=c("pl030", "pb220a"), method="multinom", nr_cpus=1)

# add margins
margins <- as.data.frame(
  xtabs(rep(1, nrow(eusilcP)) ~ eusilcP$region + eusilcP$gender + eusilcP$citizenship))
colnames(margins) <- c("db040", "rb090", "pb220a", "freq")
simPop <- addKnownMargins(simPop, margins)
simPop_adj2 <- calibPop(simPop, split="db040", 
  temp=1, epsP.factor=0.1,
 epsMinN=10, nr_cpus = 1)

## End(Not run)
# apply simulated annealing
## Not run: 
simPop_adj <- calibPop(simPop, split="db040", temp=1,
epsP.factor=0.1,nr_cpus = 1)

## End(Not run)
## Not run: 
### use multiple different margins
# person margins
persTables <- as.data.frame(
xtabs(rep(1, nrow(eusilcP)) ~ eusilcP$region + eusilcP$gender + eusilcP$citizenship))
colnames(persTables) <- c("db040", "rb090", "pb220a", "Freq")

# household margins
filter_hid <- !duplicated(eusilcP$hid)
eusilcP$hsize4 <- pmin(4,as.numeric(eusilcP$hsize))
hhTables <- as.data.frame(
  xtabs(rep(1, sum(filter_hid)) ~ eusilcP[filter_hid,]$region+eusilcP[filter_hid,]$hsize4))
colnames(hhTables) <- c("db040", "hsize4", "Freq")
simPop@pop@data$hsize4 <- pmin(4,as.numeric(simPop@pop@data$hsize))

simPop_adj_2 <- calibPop(simPop, split="db040", 
                         temp=1, epsP.factor=0.1,
                         epsH.factor = 0.1,
                         persTables = persTables,
                         hhTables = hhTables,
                         nr_cpus = 1)

## End(Not run)

simPop documentation built on Nov. 10, 2022, 5:43 p.m.