dyOptions: dygraph options
In dygraphs: Interface to 'Dygraphs' Interactive Time Series Charting Library

Add options to a dygraph plot.

dyOptions(dygraph, stackedGraph = FALSE, fillGraph = FALSE,
  fillAlpha = 0.15, stepPlot = FALSE, stemPlot = FALSE,
  drawPoints = FALSE, pointSize = 1, pointShape = c("dot", "triangle",
  "square", "diamond", "pentagon", "hexagon", "circle", "star", "plus", "ex"),
  drawGapEdgePoints = FALSE, connectSeparatedPoints = FALSE,
  strokeWidth = 1, strokePattern = NULL, strokeBorderWidth = NULL,
  strokeBorderColor = "white", plotter = NULL, colors = NULL,
  colorValue = 0.5, colorSaturation = 1, drawXAxis = TRUE,
  drawYAxis = TRUE, includeZero = FALSE, drawAxesAtZero = FALSE,
  logscale = FALSE, axisTickSize = 3, axisLineColor = "black",
  axisLineWidth = 0.3, axisLabelColor = "black", axisLabelFontSize = 14,
  axisLabelWidth = 60, drawGrid = TRUE, gridLineColor = NULL,
  gridLineWidth = 0.3, titleHeight = NULL, rightGap = 5,
  digitsAfterDecimal = 2, labelsKMB = FALSE, labelsKMG2 = FALSE,
  labelsUTC = FALSE, maxNumberWidth = 6, sigFigs = NULL,
  panEdgeFraction = NULL, animatedZooms = FALSE,
  mobileDisableYTouch = TRUE, timingName = NULL, useDataTimezone = FALSE,
  retainDateWindow = FALSE, disableZoom = FALSE)

`dygraph`	Dygraph to add options to
`stackedGraph`	If set, stack series on top of one another rather than drawing them independently. The first series specified in the input data will wind up on top of the chart and the last will be on bottom.
`fillGraph`	Should the area underneath the graph be filled? This option is not compatible with error bars. This option can also be set on a per-series basis.
`fillAlpha`	Transparency for filled regions of the plot. A value of 0.0 means that the fill will not be drawn, whereas a value of 1.0 means that the fill will be as dark as the line of the series itself.
`stepPlot`	When set, display the graph as a step plot instead of a line plot. This option can also be set on a per-series basis.
`stemPlot`	When set, display the graph as a stem plot instead of a line plot. This option can also be set on a per-series basis.
`drawPoints`	Draw a small dot at each point, in addition to a line going through the point. This makes the individual data points easier to see, but can increase visual clutter in the chart. This option can also be set on a per-series basis.
`pointSize`	The size of the dot to draw on each point in pixels. A dot is always drawn when a point is "isolated", i.e. there is a missing point on either side of it. This also controls the size of those dots. This option can also be set on a per-series basis.
`pointShape`	The shape of the dot to draw. Can be one of the following: "dot" (default), "triangle", "square", "diamond", "pentagon", "hexagon", "circle", "star", "plus" or "ex". This option can also be set on a per-series basis.
`drawGapEdgePoints`	Draw points at the edges of gaps in the data. This improves visibility of small data segments or other data irregularities.
`connectSeparatedPoints`	Usually, when dygraphs encounters a missing value in a data series, it interprets this as a gap and draws it as such. If, instead, the missing values represents an x-value for which only a different series has data, then you'll want to connect the dots by setting this to true.
`strokeWidth`	The width of the lines connecting data points. This can be used to increase the contrast or some graphs. This option can also be set on a per-series basis.
`strokePattern`	A custom pattern array where the even index is a draw and odd is a space in pixels. If null then it draws a solid line. The array should have a even length as any odd length array could be expressed as a smaller even length array. This is used to create dashed lines. This option can also be set on a per-series basis.
`strokeBorderWidth`	Draw a border around graph lines to make crossing lines more easily distinguishable. Useful for graphs with many lines. This option can also be set on a per-series basis.
`strokeBorderColor`	Color for the line border used if `strokeBorderWidth` is set. This option can also be set on a per-series basis.
`plotter`	A function (or array of functions) which plot each data series on the chart. May also be set on a per-series basis. See the dygraphs documentation for additional details on plotting functions.
`colors`	Character vector of colors for the data series. These can be of the form "#AABBCC" or "rgb(255,100,200)" or "yellow", etc. If not specified, equally-spaced points around a color wheel are used. This option can also be set on a per-series basis. Note that in both global and per-series specification of custom colors you must provide a color for all series being displayed. Note also that global and per-series color specification cannot be mixed.
`colorValue`	If custom colors are not specified, value of the data series colors, as in hue/saturation/value (0.0-1.0, default 0.5).
`colorSaturation`	If custom colors are not specified, saturation of the automatically-generated data series colors (0.0-1.0, default 0.5).
`drawXAxis`	Whether to draw the x-axis. Setting this to false also prevents x-axis ticks from being drawn and reclaims the space for the chart grid/lines.
`drawYAxis`	Whether to draw the y-axis. Setting this to false also prevents y-axis ticks from being drawn and reclaims the space for the chart grid/lines.
`includeZero`	Usually, dygraphs will use the range of the data plus some padding to set the range of the y-axis. If this option is set, the y-axis will always include zero, typically as the lowest value. This can be used to avoid exaggerating the variance in the data.
`drawAxesAtZero`	When set, draw the X axis at the Y=0 position and the Y axis at the X=0 position if those positions are inside the graph's visible area. Otherwise, draw the axes at the bottom or left graph edge as usual.
`logscale`	When set the graph shows the y-axis in log scale. Any values less than or equal to zero are not displayed.
`axisTickSize`	The spacing between axis labels and tick marks.
`axisLineColor`	Color of the x- and y-axis lines. Accepts any value which the HTML canvas strokeStyle attribute understands, e.g. 'black' or 'rgb(0, 100, 255)'. This can also be set on a per-axis basis.
`axisLineWidth`	Thickness (in pixels) of the x- and y-axis lines. This can also be set on a per-axis basis.
`axisLabelColor`	Color for x- and y-axis labels. This is a CSS color string. This may also be set on a per-axis basis.
`axisLabelFontSize`	Size of the font (in pixels) to use in the axis labels, both x- and y-axis. This may also be set on a per-axis basis.
`axisLabelWidth`	Width (in pixels) of the containing divs for x- and y-axis labels.
`drawGrid`	Whether to display grid lines in the chart. This may be set on a per-axis basis to define the visibility of each axis' grid separately. Defaults to `TRUE` for x and y, and `FALSE` for y2.
`gridLineColor`	The color of the grid lines. This option can also be set on a per-series basis.
`gridLineWidth`	Thickness (in pixels) of the grid lines drawn under the chart. This option can also be set on a per-series basis.
`titleHeight`	Height of the chart title, in pixels. This also controls the default font size of the title. If you style the title on your own, this controls how much space is set aside above the chart for the title's div.
`rightGap`	Number of pixels to leave blank at the right edge of the Dygraph. This makes it easier to highlight the right-most data point.
`digitsAfterDecimal`	Unless it's run in scientific mode (see the `sigFigs` option), dygraphs displays numbers with `digitsAfterDecimal` digits after the decimal point. Trailing zeros are not displayed, so with a value of 2 you'll get '0', '0.1', '0.12', '123.45' but not '123.456' (it will be rounded to '123.46'). Numbers with absolute value less than 0.1^digitsAfterDecimal (i.e. those which would show up as '0.00') will be displayed in scientific notation.
`labelsKMB`	Show K/M/B for thousands/millions/billions on y-axis.
`labelsKMG2`	Show k/M/G for kilo/Mega/Giga on y-axis. This is different than `labelsKMB` in that it uses base 2, not 10.
`labelsUTC`	Show date/time labels according to UTC (instead of local time). Note that this option cannot is incompatible with `useDataTimezone` (you must use one or the other).
`maxNumberWidth`	When displaying numbers in normal (not scientific) mode, large numbers will be displayed with many trailing zeros (e.g. 100000000 instead of 1e9). This can lead to unwieldy y-axis labels. If there are more than maxNumberWidth digits to the left of the decimal in a number, dygraphs will switch to scientific notation, even when not operating in scientific mode. If you'd like to see all those digits, set this to something large, like 20 or 30.
`sigFigs`	By default, dygraphs displays numbers with a fixed number of digits after the decimal point. If you'd prefer to have a fixed number of significant figures, set this option to that number of significant figures. A value of 2, for instance, would cause 1 to be display as 1.0 and 1234 to be displayed as 1.23e+3.
`panEdgeFraction`	A value representing the farthest a graph may be panned, in percent of the display. For example, a value of 0.1 means that the graph can only be panned 10 null means no bounds.
`animatedZooms`	Set this option to animate the transition between zoom windows. Applies to programmatic and interactive zooms. Note that if you also set a drawCallback, it will be called several times on each zoom. If you set a zoomCallback, it will only be called after the animation is complete.
`mobileDisableYTouch`	Set this option to automatically disable touch events on the Y axis for mobile devices (since this interferes with swiping/scrolling on mobile devices).
`timingName`	Set this option to log timing information. The value of the option will be logged along with the timing, so that you can distinguish multiple dygraphs on the same page.
`useDataTimezone`	Whether to use the time zone of the underlying xts object for display. Defaults to `FALSE` which uses the time zone of the client workstation. Note that this option is incompatible with `labelsUTC` (you must use one or other other).
`retainDateWindow`	Whether to retain the user's current date window (zoom level) when updating an existing dygraph with new data and/or options.
`disableZoom`	Set this option to disable click and drag zooming.