varbvs: Fit variable selection model using variational approximation...

varbvsR Documentation

Fit variable selection model using variational approximation methods.

Description

Compute fully-factorized variational approximation for Bayesian variable selection in linear (family = gaussian) or logistic regression (family = binomial). More precisely, find the "best" fully-factorized approximation to the posterior distribution of the coefficients, with spike-and-slab priors on the coefficients. By "best", we mean the approximating distribution that locally minimizes the Kullback-Leibler divergence between the approximating distribution and the exact posterior.

Usage

  varbvs(X, Z, y, family = c("gaussian","binomial"), sigma, sa,
         logodds, weights, resid.vcov, alpha, mu, eta, update.sigma,
         update.sa, optimize.eta, initialize.params, update.order,
         nr = 100, sa0 = 1, n0 = 10, tol = 1e-4, maxiter = 1e4,
         verbose = TRUE)

Arguments

X

n x p input matrix, where n is the number of samples, and p is the number of variables. X cannot be sparse, and cannot have any missing values (NA).

Z

n x m covariate data matrix, where m is the number of covariates. Do not supply an intercept as a covariate (i.e., a column of ones), because an intercept is automatically included in the regression model. For no covariates, set Z = NULL. The covariates are assigned an improper, uniform prior. Although improper priors are generally not advisable because they can result in improper posteriors and Bayes factors, this choice allows us to easily integrate out these covariates.

y

Vector of length n containing observations of binary (family = "binomial") or continuous (family = "gaussian") outcome. For a binary outcome, all entries of y must be 0 or 1.

family

"gaussian" for linear regression model, or "binomial" for logistic regression model.

sigma

Candidate settings for the residual variance parameter. Must be of the same length as inputs sa and logodds (or have length equal to the number of columns of logodds). Only used for linear regression, and will generate an error if family = "binomial". If missing, residual variance parameter is automatically fitted to data by computing approximate maximum-likelihood (ML) estimate.

sa

Hyperparameter sa is the prior variance of regression coefficients for variables that are included in the model. This prior variance is always scaled by sigma (for logistic regression, we take sigma = 1). Scaling the variance of the coefficients in this way is necessary to ensure that this prior is invariant to measurement scale (e.g., switching from grams to kilograms). This input specifies the candidate settings for sa, of the same length as inputs sigma and logodds (or have length equal to the number of columns of logodds). If missing, prior variance is automatically fitted to data by compute approximate maximum (ML) estimates, or maximum a posteriori estimates when n0 > 0 and sa0 > 0.

logodds

Hyperparameter logodds is the prior log-odds that a variable is included in the regression model; it is defined as logodds = log10(q/(1-q)), where q is the prior probability that a variable is included in the regression model. Note that we use the base-10 logarithm instead of the natural logarithm because it is usually more natural to specify prior log-odds settings in this way. (To obtain the prior probability from the log-odds, use the following formula: q = 1/(1 + 10^(-logodds)). The prior log-odds may also be specified separately for each variable, which is useful is there is prior information about which variables are most relevant to the outcome. This is accomplished by setting logodds to a p x ns matrix, where p is the number of variables, and ns is the number of hyperparameter settings. Note it is not possible to fit the logodds parameter; if logodds input is not provided as input, then it is set to the default value when sa and sigma are missing, and otherwise an error is generated.

weights

Optional vector of weights for weighted linear regression; larger weights correspond to smaller variances. It should be NULL, or a numeric vector of the same length as y. This is equivalent to the weights argument in lm. This option is only available for linear regression (family = "gaussian"), and cannot be combined with resid.vcov.

resid.vcov

Optional matrix specifying the covariance of the residual, scaled by sigma. This is useful to allow for observations with different variances (similar to weights), or for observations that are not independent. It should either be NULL, or a symmetric positive definite matrix in which the number of rows and columns is equal to the length of y. This option is only available for linear regression (family = "gaussian"), and cannot be combined with weights.

alpha

Good initial estimate for the variational parameter alpha for each hyperparameter setting. Either missing, or a p x ns matrix, where p is the number of variables, and ns is the number of hyperparameter settings.

mu

Good initial estimate for the variational parameter mu for each hyperparameter setting. Either missing, or a p x ns matrix, where p is the number of variables, and ns is the number of hyperparameter settings.

eta

Good initial estimate of the additional free parameters specifying the variational approximation to the logistic regression factors. Either missing, or an n x ns matrix, where n is the number of samples, and ns is the number of hyperparameter settings.

update.sigma

Setting this to TRUE ensures that sigma is always fitted to data, in which case input vector sigma is used to provide initial estimates.

update.sa

Setting this to TRUE ensures that sa is always fitted to data, in which case input vector sa is used to provide initial estimates.

optimize.eta

When optimize.eta = TRUE, eta is fitted to the data during the inner loop coordinate ascent updates, even when good estimates of eta are provided as input.

initialize.params

If FALSE, the initialization stage of the variational inference algorithm (see below) will be skipped, which saves computation time for large data sets.

update.order

Order of the co-ordinate ascent updates for fitting the variational approximation. The default is update.order = 1:p, where p is the number of variables (the number of columns of X).

nr

Number of samples of "model PVE" to draw from posterior.

sa0

Scale parameter for a scaled inverse chi-square prior on hyperparameter sa. Must be >= 0.

n0

Number of degrees of freedom for a scaled inverse chi-square prior on hyperparameter sa. Must be >= 0. Large settings of n0 provide greater stability of the parameter estimates for cases when the model is "sparse"; that is, when few variables are included in the model.

tol

Convergence tolerance for inner loop.

maxiter

Maximum number of inner loop iterations.

verbose

If verbose = TRUE, print progress of algorithm to console.

Value

An object with S3 class c("varbvs","list").

family

Either "gaussian" or "binomial".

sigma

Settings for sigma (family = "gaussian" only).

sa

Settings for prior variance parameter.

logodds

Prior log-odds settings.

prior.same

TRUE if prior is identical for all variables. When logodds is a p x ns matrix, prior.same = FALSE.

sa0

Scale parameter for prior on hyperparameter sa.

n0

Degrees of freedom for prior on hyperparameter sa.

update.sigma

If TRUE, sigma was fit to data for each setting of prior logodds (family = "gaussian" only).

update.sa

If TRUE, sa was fit to data for each setting of prior logodds.

logw

An array with ns elements, in which logw[i] is the variational lower bound on the marginal log-likelihood for setting i of the hyperparameters. These provide approximate values of the marginal log-likelihood for each hyperparameter setting.

w

Normalized weights (posterior probabilities) for each of the hyperparameter settings computed from logw using normalizelogweights.

alpha

Variational estimates of posterior inclusion probabilities for each hyperparameter setting.

mu

Variational estimates of posterior mean coefficients for each hyperparameter setting.

s

Variational estimates of posterior variances for each hyperparameter setting.

pip

"Averaged" posterior inclusion probabilities computed as a weighted average of the individual PIPs (alpha), with weights given by w.

beta

"Averaged" posterior mean regression coefficients.

mu.cov

Posterior mean regression coefficients for covariates, including intercept, for each hyperparameter setting.

beta.cov

"Averaged" posterior mean regression coefficients for covariates, including intercept.

eta

Additional variational parameters for family = "binomial" only.

optimize.eta

If TRUE, eta was fit to data (family = "binomial" only).

fitted.values

Matrix containing the predicted (or "fitted") values of the outcome at each hyperparameter setting. For the logistic regression model (family = "binomial"), each matrix entry gives the probability that the binary outcome is equal to 1.

residuals

For linear regression, this is a matrix containing the model residuals at each hyperparameter setting. For family = "binomial", this is a list with two matrices of the same size; residuals$deviance contains the deviance residuals based on the likelihood ratio chi-squared statistic; residuals$response contains the "response" residuals simply defined as the difference between the actual binary values (0 or 1) and the fitted binomial probabilities (i.e., fitted.values).

pve

For each hyperparameter setting, and for each variable, mean estimate of the proportion of variance in outcome explained conditioned on variable being included in the model (family = "gaussian" only).

model.pve

Samples drawn from posterior distribution giving estimates of proportion of variance in outcome (y) explained by fitted variable selection model. This is for family = "gaussian" only. To obtain the posterior mean estimate of the proportion of variance explained (PVE), for example, simply type mean(fit$model.pve).

Regression models

Two types of outcomes (y) are modeled: (1) a continuous outcome, also a "quantitative trait" in the genetics literature; or (2) a binary outcome with possible values 0 and 1. For the former, set family = "gaussian", in which case, the outcome is i.i.d. normal with mean u0 + Z*u + X*b and variance sigma, in which u and b are vectors of regresion coefficients, and u0 is the intercept. In the second case, we use logistic regression to model the outcome, in which the probability that y = 1 is equal to sigmoid(u0 + Z*u + X*b). See help(sigmoid) for a description of the sigmoid function. Note that the regression always includes an intercept term (u0).

Co-ordinate ascent optimization procedure

For both regression models, the fitting procedure consists of an inner loop and an outer loop. The outer loop iterates over each of the hyperparameter settings (sa, sigma and logodds). Given a setting of the hyperparameters, the inner loop cycles through coordinate ascent updates to tighten the lower bound on the marginal likelihood, Pr(Y | X, sigma, sa, logodds). The inner loop coordinate ascent updates terminate when either (1) the maximum number of inner loop iterations is reached, as specified by maxiter, or (2) the maximum difference between the estimated posterior inclusion probabilities is less than tol.

To provide a more accurate variational approximation of the posterior distribution, by default the fitting procedure has two stages. In the first stage, the entire fitting procedure is run to completion, and the variational parameters (alpha, mu, s, eta) corresponding to the maximum lower bound are then used to initialize the coordinate ascent updates in a second stage. Although this has the effect of doubling the computation time (in the worst case), the final posterior estimates tend to be more accurate with this two-stage fitting procedure.

Variational approximation

Outputs alpha, mu and s specify the approximate posterior distribution of the regression coefficients. Each of these outputs is a p x ns matrix. For the ith hyperparameter setting, alpha[,i] is the variational estimate of the posterior inclusion probability (PIP) for each variable; mu[,i] is the variational estimate of the posterior mean coefficient given that it is included in the model; and s[,i] is the estimated posterior variance of the coefficient given that it is included in the model. These are also the quantities that are optimized as part of the inner loop coordinate ascent updates. An additional free parameter, eta, is needed for fast computation with the logistic regression model (family = "binomial"). The fitted value of eta is returned as an n x ns matrix.

The variational estimates should be interpreted carefully, especially when variables are strongly correlated. For example, consider the simple scenario in which 2 candidate variables are closely correlated, and at least one of them explains the outcome with probability close to 1. Under the correct posterior distribution, we would expect that each variable is included with probability ~0.5. However, the variational approximation, due to the conditional independence assumption, will typically get this wrong, and concentrate most of the posterior weight on one variable (the actual variable that is chosen will depend on the starting conditions of the optimization). Although the individual PIPs are incorrect, a statistic summarizing the variable selection for both correlated variables (e.g., the total number of variables included in the model) should be reasonably accurate.

More generally, if variables can be reasonably grouped together based on their correlations, we recommend interpreting the variable selection results at a group level. For example, in genome-wide association studies (see the vignettes) ,a SNP with a high PIP indicates that this SNP is probably associated with the trait, and one or more nearby SNPs within a chromosomal region, or “locus,” may be associated as well. Therefore, we interpreted the GWAS variable selection results at the level of loci, rather than at the level of individual SNPs.

Also note that special care is required for interpreting the results of the variational approximation with the logistic regression model. In particular, interpretation of the individual estimates of the regression coefficients (e.g., the posterior mean estimates fit$mu) is not straightforward due to the additional approximation introduced on the individual nonlinear factors in the likelihood. As a general guideline, only the relative magnitudes of the coefficients are meaningful.

Averaging over hyperparameter settings

In many settings, it is good practice to account for uncertainty in the hyperparameters when reporting final posterior quantities. For example, hyperparameter sa is often estimated with a high degree of uncertainty when only a few variables are included in the model. Provided that (1) the hyperparameter settings sigma, sa and logodds adequately represent the space of possible hyperparameter settings with high posterior mass, (2) the hyperparameter settings are drawn from the same distribution as the prior, and (3) the fully-factorized variational approximation closely approximates the true posterior distribution, then final posterior quantities can be calculated by using logw as (unnormalized) log-marginal probabilities.

Even when conditions (1), (2) and/or (3) are not satisfied, this can approach can still often yield reasonable estimates of averaged posterior quantities. The examples below demonstrate how final posterior quantities are reported by function summary.varbvs (see help(summary.varbvs) for more details). To account for discrepancies between the prior on (sigma,sa,logodds) and the sampling density used to draw candidate settings of the hyperparameters, adjust the log-probabilities by setting fit$logw <- fit$logw + logp/logq, where logp is the log-density of the prior distribution, and logq is the log-density of the sampling distribution. (This is importance sampling; see, for example, R. M. Neal, Annealed importance sampling, Statistics and Computing, 2001.)

Prior on proportion of variance explained

Specifying the prior variance of the regression coefficients (sa) can be difficult, which is why we have included the option of fitting this hyperparameter to the data (see input argument update.sa above). However, in many settings, especially when a small number of variables are included in the regression model, it is preferrable to average over candidate settings of sa instead of fitting sa to the data. To choose a set of candidate settings for sa, we have advocated for setting sa indirectly through a prior estimate of the proportion of variance in the outcome explained by the variables (abbreviated as PVE), since it is often more natural to specify the PVE rather than the prior variance (see references below). This is technically only suitable or the linear regression model (family = "gaussian"), but could potentially be used for the logistic regression model in an approximate way.

For example, one could approximate a uniform prior on the PVE by drawing the PVE uniformly between 0 and 1, additionally specifying candidate settings for the prior log-odds, then computing the prior variance (sa) as follows:

sx <- sum(var1.cols(X))
sa <- PVE/(1-PVE)/(sigmoid(log(10)*logodds)*sx)

Note that this calculation will yield sa = 0 when PVE = 0, and sa = Inf when PVE = 1.

Also, bear in mind that if there are additional covariates (Z) included in the linear regression model that explain variance in Y, then it will usually make more sense to first remove the linear effects of these covariates before performing these calculations. The PVE would then represent the prior proportion of variance in the residuals of Y that are explained by the candidate variables. Alternatively, one could include the matrix Z in the calculations above, taking care to ensure that the covariates are included in the model with probability 1.

Memory requirements

Finally, we point out that the optimization procedures were carefully designed so that they can be applied to very large data sets; to date, this code has been tested on data sets with >500,000 variables and >10,000 samples. An important limiting factor is the ability to store the data matrix X in memory. To reduce memory requirements, in the MATLAB interface we require that X be single precision, but this option is not available in R. Additionally, we mostly avoid generating intermediate products that are of the same size as X. Only one such intermediate product is generated when family = "gaussian", and none for family = "binomial".

Author(s)

Peter Carbonetto peter.carbonetto@gmail.com

References

P. Carbonetto and M. Stephens (2012). Scalable variational inference for Bayesian variable selection in regression, and its accuracy in genetic association studies. Bayesian Analysis 7, 73–108.

Y. Guan and M. Stephens (2011). Bayesian variable selection regression for genome-wide association studies and other large-scale problems. Annals of Applied Statistics 5, 1780–1815.

X. Zhou, P. Carbonetto and M. Stephens (2013). Polygenic modeling with Bayesian sparse linear mixed models. PLoS Genetics 9, e1003264.

See Also

summary.varbvs, varbvs.properties, varbvspve, varbvsnorm, varbvsbin, varbvsbinz, normalizelogweights, varbvs-internal

Examples


# LINEAR REGRESSION EXAMPLE
# -------------------------
# Data are 200 uncorrelated ("unlinked") single nucleotide polymorphisms
# (SNPs) with simulated genotypes, in which the first 20 of them have an
# effect on the outcome. Also generate data for 3 covariates.
maf <- 0.05 + 0.45*runif(200)
X   <- (runif(400*200) < maf) + (runif(400*200) < maf)
X   <- matrix(as.double(X),400,200,byrow = TRUE)
Z   <- randn(400,3)

# Generate the ground-truth regression coefficients for the variables
# (X) and additional 3 covariates (Z). Adjust the QTL effects so that
# the variables (SNPs) explain 50 percent of the variance in the
# outcome.
u    <- c(-1,2,1)
beta <- c(rnorm(20),rep(0,180))
beta <- 1/sd(c(X %*% beta)) * beta

# Generate the quantitative trait measurements.
y <- c(-2 + Z %*% u + X %*% beta + rnorm(400))

# Fit the variable selection model.
fit <- varbvs(X,Z,y,logodds = seq(-3,-1,0.1))
print(summary(fit))

# Compute the posterior mean estimate of hyperparameter sa.
sa <- with(fit,sum(sa * w))

# Compare estimated outcomes against observed outcomes.
y.fit <- predict(fit,X,Z)
print(cor(y,y.fit))

# LOGISTIC REGRESSION EXAMPLE
# ---------------------------
# Data are 100 uncorrelated ("unlinked") single nucleotide polymorphisms
# (SNPs) with simulated genotypes, in which the first 10 of them have an
# effect on the outcome. Also generate data for 2 covariates.
maf <- 0.05 + 0.45*runif(100)
X   <- (runif(750*100) < maf) + (runif(750*100) < maf)
X   <- matrix(as.double(X),750,100,byrow = TRUE)
Z   <- randn(750,2)

# Generate the ground-truth regression coefficients for the variables
# (X) and additional 2 covariates (Z).
u    <- c(-1,1)
beta <- c(0.5*rnorm(10),rep(0,90))

# Simulate the binary trait (case-control status) as a coin toss with
# success rates given by the logistic regression.
sigmoid <- function (x)
  1/(1 + exp(-x))
y <- as.double(runif(750) < sigmoid(-1 + Z %*% u + X %*% beta))

# Fit the variable selection model.
fit <- varbvs(X,Z,y,"binomial",logodds = seq(-2,-0.5,0.5))
print(summary(fit))

varbvs documentation built on June 7, 2023, 5:43 p.m.