Transcription factor binding site (TFBS) analysis with the \"TFBSTools\" package

knitr::opts_chunk$set(collapse = TRUE, comment = "#>")
code <- function(...) {
    cat(paste(..., sep = "\n"))
}

date = "`r doc_date()`"
pkg = "`r pkg_ver('BiocStyle')`"
short=TRUE #if short==TRUE, do not echo code chunks
debug=FALSE
knitr::opts_chunk$set(echo=!short, warning=debug, message=debug, error=FALSE,
               cache.path = "cache/",
               fig.path = "figures/")

Introduction

Eukaryotic regulatory regions are characterized based a set of discovered transcription factor binding sites (TFBSs), which can be represented as sequence patterns with various degree of degeneracy.

This r Biocpkg("TFBSTools") package is designed to be a compuational framework for TFBSs analysis. Based on the famous perl module TFBS [@lenhard_tfbs:2002], we extended the class definitions and enhanced implementations in an interactive environment. So far this package contains a set of integrated _R S4 style classes, tools, JASPAR database interface functions. Most approaches can be described in three sequential phases. First, a pattern is generated for a set of target sequences known to be bound by a specific transcription factor. Second, a set of DNA sequences are analyzed to determine the locations of sequences consistent with the described binding pattern. Finally, in advanced cases, predictive statistical models of regulatory regions are constructed based on mutiple occurrences of the detected patterns.

Since JASPAR2016, the next generation of transcription factor binding site, TFFM [@mathelier_next_2013], was introduced into JASPAR for the first time. Now r Biocpkg("TFBSTools") also supports the manipulation of TFFM. TFFM is based on hidden Markov Model (HMM). The biggest advantage of TFFM over basic PWM is that it can model position interdependence within TFBSs and variable motif length. A novel graphical representation of the TFFM motifs that captures the position interdependence is also introduced. For more details regarding TFFM, please refer to http://cisreg.cmmt.ubc.ca/TFFM/doc/.

r Biocpkg("TFBSTools") aims to support all these functionalities in the environment R, except the external motif finding software, such as MEME [@bailey_fitting_1994].

S4 classes in TFBSTools

The package is built around a number of S4 class of which the XMatrix, SiteSet classes are the most important. The section will briefly explain most of them defined in r Biocpkg("TFBSTools").

XMatrix and its subclasses

XMatrix is a virtual class, which means no concrete objects can be created directly from it. The subclass PFMatrix is designed to store all the relevant information for one raw position frequency matrix (PFM). This object is compatible with one record from JASPAR database. PWMatrix is used to store a position weight matrix (PWM). Compared with PFMatrix, it has one extra slot pseudocounts. ICMatrix is used to store a information content matrix (ICM). Compared with PWMatrix, it has one extra slot schneider.

The following examples demonstrate the creation of PFMatrix, the conversions between these matrices and some assocated methods defined for these classes.

library(TFBSTools)
## PFMatrix construction; Not all of the slots need to be initialised.
pfm <- PFMatrix(ID="MA0004.1", name="Arnt", 
                matrixClass="Zipper-Type", strand="+",
                bg=c(A=0.25, C=0.25, G=0.25, T=0.25),
                tags=list(family="Helix-Loop-Helix", species="10090",
                          tax_group="vertebrates",medline="7592839", 
                          type="SELEX",ACC="P53762", pazar_tf_id="TF0000003",
                          TFBSshape_ID="11", TFencyclopedia_ID="580"),
                profileMatrix=matrix(c(4L,  19L, 0L,  0L,  0L,  0L,
                                       16L, 0L,  20L, 0L,  0L,  0L,
                                       0L,  1L,  0L,  20L, 0L,  20L,
                                       0L,  0L,  0L,  0L,  20L, 0L),
                                     byrow=TRUE, nrow=4,
                                     dimnames=list(c("A", "C", "G", "T"))
                                     )
                )

pfm

## coerced to matrix
as.matrix(pfm)

## access the slots of pfm
ID(pfm)
name(pfm)
Matrix(pfm)
ncol(pfm)
length(pfm)

## convert a PFM to PWM, ICM
pwm <- toPWM(pfm, type="log2probratio", pseudocounts=0.8,
             bg=c(A=0.25, C=0.25, G=0.25, T=0.25))

icm <- toICM(pfm, pseudocounts=sqrt(rowSums(pfm)[1]), schneider=FALSE,
             bg=c(A=0.25, C=0.25, G=0.25, T=0.25))

## get the reverse complment matrix with all the same information except the strand.
pwmRevComp <- reverseComplement(pwm)

XMatrixList and its subclasses

XMatrixList is used to store a set of XMatrix objects. Basically it is a SimpleList for easy manipulation the whole set of XMatrix. The concrete objects can be PFMatrix, PWMatrix and ICMatrix.

pfm2 <- pfm
pfmList <- PFMatrixList(pfm1=pfm, pfm2=pfm2, use.names=TRUE)
pfmList
names(pfmList)

SiteSet, SiteSetList, SitePairSet and SitePairSetList

The SiteSet class is a container for storing a set of putative transcription factor binding sites on a nucleotide sequence (start, end, strand, score, pattern as a PWMatrix, etc.) from scaning a nucleotide sequence with the corresponding PWMatrix. Similarly, SiteSetList stores a set of SiteSet objects.

For holding the results returned from a pairwise alignment scaaning, SitePairSet and SitePairSetList are provided.

More detailed examples of using these classes will be given in later Section.

MotifSet

This MotifSet class is used to store the generated motifs from de novo motif discovery software, such as MEME [@bailey_fitting_1994].

TFFM and its subclasses

TFMM is a virtual class and two classes TFFMFirst and TFFMDetail are derived from this virtual class. Compared with PFMatrix class, TFFM has two extra slots that store the emission distribution parameters and transition probabilities. TFFMFirst class stands for the first-order TFFMs, while TFFMDetail stands for the more detailed and descriptive TFFMs.

Although we provide the constructor functions for TFFM class, the TFFM object is usually generated from reading a XML file from the Python module TFFM.

  xmlFirst <- file.path(system.file("extdata", package="TFBSTools"),
                        "tffm_first_order.xml")
  tffmFirst <- readXMLTFFM(xmlFirst, type="First")
  tffm <- getPosProb(tffmFirst)

  xmlDetail <- file.path(system.file("extdata", package="TFBSTools"),
                         "tffm_detailed.xml")
  tffmDetail <- readXMLTFFM(xmlDetail, type="Detail")
  getPosProb(tffmDetail)

Database interfaces for JASPAR2014 database

This section will demonstrate how to operate on the JASPAR 2014 database. JASPAR is a collection of transcription factor DNA-binding preferences, modeled as matrices. These can be converted into PWMs, used for scanning genomic sequences. JASPAR is the only database with this scope where the data can be used with no restrictions (open-source). A Bioconducto experiment data package r Biocexptpkg("JASPAR2014") is provided with each release of JASPAR.

Search JASPAR2014 database

This search function fetches matrix data for all matrices in the database matching criteria defined by the named arguments and returns a PFMatrixList object. For more search criterias, please see the help page for getMatrixSet.

suppressMessages(library(JASPAR2014))
opts <- list()
opts[["species"]] <- 9606
opts[["name"]] <- "RUNX1"
opts[["type"]] <- "SELEX"
opts[["all_versions"]] <- TRUE
PFMatrixList <- getMatrixSet(JASPAR2014, opts)
PFMatrixList

opts2 <- list()
opts2[["type"]] <- "SELEX"
PFMatrixList2 <- getMatrixSet(JASPAR2014, opts2)
PFMatrixList2

Store, delete and initialize JASPAR2014 database

We also provide some functions to initialize an empty JASPAR2014 style database, store new PFMatrix or PFMatrixList into it, or delete some records based on ID. The backend of the database is SQLite.

db <- "myMatrixDb.sqlite"
initializeJASPARDB(db, version="2014")
data("MA0043")
storeMatrix(db, MA0043)
deleteMatrixHavingID(db,"MA0043.1")
file.remove(db)

PFM, PWM and ICM methods

This section will give an introduction of matrix operations, including conversion from PFM to PWM and ICM, profile matrices comparison, dynamic random profile generation.

PFM to PWM

The method toPWM can convert PFM to PWM [@Wasserman:2004ec]. Optional parameters include type, pseudocounts, bg. The implementation in this package is a bit different from that in r Biocpkg("Biostrings").

First of all, toPWM allows the input matrix to have different column sums, which means the count matrix can have an unequal number of sequences contributing to each column. This scenario is rare, but exists in JASPAR SELEX data.

Second, we can specify customized pseudocounts. pseudocounts is necessary for correcting the small number of counts or eliminating the zero values before log transformation. In TFBS perl module, the square root of the number of sequences contributing to each column. However, it has been shown to too harsh [@nishida_pseudocounts_2009]. Hence, a default value of 0.8 is used. Of course, it can be changed to other customized value or even different values for each column.

pwm <- toPWM(pfm, pseudocounts=0.8)
pwm

PFM to ICM

The method toICM can convert PFM to ICM [@schneider_information_1986]. Besides the similar pseudocounts, bg, you can also choose to do the schneider correction.

The information content matrix has a column sum between 0 (no base preference) and 2 (only 1 base used). Usually this information is used to plot sequence log.

How a PFM is converted to ICM: we have the PFM matrix $x$, base backrgound frequency $bg$, $pseudocounts$ for correction.

$$Z[j] = \sum_{i=1}^{4} x[i,j]$$

$$p[i,j] = {(x[i,j] + bg[i] \times pseudocounts[j]) \over (Z[j] + \sum_{i}bg[i] \times pseudocounts[j]}$$

$$D[j] = \log_2{4} + \sum_{i=1}^{4} p[i,j]*\log{p[i,j]}$$

$$ICM[i,j] = p[i,j] \times D[j]$$

icm <- toICM(pfm, pseudocounts=0.8, schneider=TRUE)
icm

To plot the sequence logo, we use the package r Biocpkg("seqlogo"). In sequence logo, each position gives the information content obtained for each nucleotide. The higher of the letter corresponding to a nucleotide, the larger information content and higher probability of getting that nucleotide at that position.

seqLogo(icm)

Align PFM to a custom matrix or IUPAC string

In some cases, it is beneficial to assess similarity of existing profile matrices, such as JASPAR, to a newly discovered matrix (as with using BLAST for sequence data comparison when using Genbank).

r Biocpkg("TFBSTools") provides tools for comparing pairs of PFMs, or a PFM with IUPAC string, using a modified Needleman-Wunsch algorithm [@sandelin_integrated_2003].

## one to one comparison
data(MA0003.2)
data(MA0004.1)
pfmSubject <- MA0003.2
pfmQuery <-  MA0004.1
PFMSimilarity(pfmSubject, pfmQuery)

## one to several comparsion
PFMSimilarity(pfmList, pfmQuery)

## align IUPAC string
IUPACString <- "ACGTMRWSYKVHDBN"
PFMSimilarity(pfmList, IUPACString)

PWM similarity

To measure the similarity of two PWM matrix in three measurements: normalised Euclidean distance, Pearson correlation and Kullback Leibler divergence [@linhart_transcription_2008]. Given two PWMs in probability type, $P^1$ and $P^2$, where $l$ is the length. $P^j_{i,b}$ is the values in column $i$ with base $b$ in PWM $j$. The normalised Euclidean distance is computed in

$$ D(P^1, P^2) = {1 \over {\sqrt{2}l}} \cdot \sum_{i=1}^{l} \sqrt{\sum_{b \in {{A,C,G,T}}} (P_{i,b}^1-P_{i,b}^2)^2}$$

This distance is between 0 (perfect identity) and 1 (complete dis-similarity).

The pearson correlation coefficient is computed in

$$ r(P^1, P^2) = {1 \over l} \cdot \sum_{i=1}^l {\sum_{b \in {A,C,G,T}} (P_{i,b}^1 - 0.25)(P_{i,b}^2-0.25) \over \sqrt{\sum_{b \in {A,C,G,T}} (P_{i,b}^1 - 0.25)^2 \cdot \sum_{b \in {A,C,G,T}} (P_{i,b}^2 - 0.25)^2}}$$

The Kullback-Leibler divergence is computed in

$$KL(P^1, P^2) = {1 \over {2l}} \cdot \sum_{i=1}^l \sum_{b \in {A,C,G,T}} (P_{i,b}^1\log{ P_{i,b}^1 \over P_{i,b}^2}+ P_{i,b}^2\log{P_{i,b}^2 \over {P_{i,b}^1}})$$

data(MA0003.2)
data(MA0004.1)
pwm1 <- toPWM(MA0003.2, type="prob")
pwm2 <- toPWM(MA0004.1, type="prob")
PWMSimilarity(pwm1, pwm2, method="Euclidean")
PWMSimilarity(pwm1, pwm2, method="Pearson")
PWMSimilarity(pwm1, pwm2, method="KL")

Dynamic random profile generation

In this section, we will demonstrate the capability of random profile matrices generation with matrix permutation and probabilitis sampling. In many computational/simulation studies, it is particularly desired to have a set of random matrices. Some cases includes the estimation of distance between putative TFBS and transcription start site, the evaluation of comparison between matrices [@bryne_jaspar_2008]. These random matrices are expected to have same statistical properties with the selcted profiles, such as nucleotide content or information content.

The permutation method is relatively easy. It simply shuffles the columns either constrainted in each matrix, or columns almong all selected matrices. The probabilistic sampling is more complicated and can be done in two steps:

  1. A Dirichlet multinomial mixture model is trained on all available matrices in JASPAR.
  2. Random columns are sampled from the posterior distribution of the trained Dirichlet model based on selected profiles.
## Matrice permutation
permuteMatrix(pfmQuery)
permuteMatrix(pfmList, type="intra")
permuteMatrix(pfmList, type="inter")
## Dirichlet model training
data(MA0003.2)
data(MA0004.1)
pfmList <- PFMatrixList(pfm1=MA0003.2, pfm2=MA0004.1, use.names=TRUE)
dmmParameters <- dmmEM(pfmList, K=6, alg="C")
## Matrice sampling from trained Dirichlet model
pwmSampled <- rPWMDmm(MA0003.2, dmmParameters$alpha0, dmmParameters$pmix,
                      N=1, W=6)

TFFM methods

The graphical representation of TFFM

Basic PWMs can be graphically represented by the sequence logos shown above. A novel graphical representation of TFFM is requied for taking the dinucleotide dependence into account.

For the upper part of the sequence logo, we represent the nucleotide probabilities at position $p$ for each possible nucleotide at position $p-1$. Hence, each column represents a position within a TFBS and each row the nucleotide probabilities found at that position. Each row assumes a specific nucleotide has been emitted by the previous hidden state. The intersection between a column corresponding to position $p$ and row corresponding to nucleotide $n$ gives the probabilities of getting each nucleotide at position $p$ if $n$ has been seen at position $p-1$. The opacity to represent the sequence logo is proportional to the probablity of possible row to be used by the TFFM.

  ## sequence logo for First-order TFFM
  seqLogo(tffmFirst)
  ## sequence logo for detailed TFFM
  seqLogo(tffmDetail)

Scan sequence and alignments with PWM pattern

searchSeq

searchSeq scans a nucleotide sequence with the pattern represented in the PWM. The strand argument controls which strand of the sequence will be searched. When it is *, both strands will be scanned.

A SiteSet object will be returned which can be exported into GFF3 or GFF2 format. Empirical p-values for the match scores can be calculated by an exact method from r CRANpkg("TFMPvalue") or the distribution of sampled scores.

library(Biostrings)
data(MA0003.2)
data(MA0004.1)
pwmList <- PWMatrixList(MA0003.2=toPWM(MA0003.2), MA0004.1=toPWM(MA0004.1),
                        use.names=TRUE)
subject <- DNAString("GAATTCTCTCTTGTTGTAGTCTCTTGACAAAATG")
siteset <- searchSeq(pwm, subject, seqname="seq1", min.score="60%", strand="*")

sitesetList <- searchSeq(pwmList, subject, seqname="seq1",
                         min.score="60%", strand="*")


## generate gff2 or gff3 style output
head(writeGFF3(siteset))
head(writeGFF3(sitesetList))
head(writeGFF2(siteset))

## get the relative scores
relScore(siteset)
relScore(sitesetList)

## calculate the empirical p-values of the scores
pvalues(siteset, type="TFMPvalue")
pvalues(siteset, type="sampling")

searchAln

searchAln scans a pairwise alignment with the pattern represented by the PWM. It reports only those hits that are present in equivalent positions of both sequences and exceed a specified threshold score in both, AND are found in regions of the alignment above the specified.

library(Biostrings)
data(MA0003.2)
pwm <- toPWM(MA0003.2)
aln1 <- DNAString("ACTTCACCAGCTCCCTGGCGGTAAGTTGATC---AAAGG---AAACGCAAAGTTTTCAAG")
aln2 <- DNAString("GTTTCACTACTTCCTTTCGGGTAAGTAAATATATAAATATATAAAAATATAATTTTCATC")
sitePairSet <- searchAln(pwm, aln1, aln2, seqname1="seq1", seqname2="seq2",
                         min.score="50%", cutoff=0.5,
                         strand="*", type="any")
## generate gff style output
head(writeGFF3(sitePairSet))
head(writeGFF2(sitePairSet))

## search the Axt alignment
library(CNEr)
axtFilesHg19DanRer7 <- file.path(system.file("extdata", package="TFBSTools"),
                                 "hg19.danRer7.net.axt")
axtHg19DanRer7 <- readAxt(axtFilesHg19DanRer7)
sitePairSet <-  searchAln(pwm, axtHg19DanRer7, min.score="80%",
                          windowSize=51L, cutoff=0.7, strand="*",
                          type="any", conservation=NULL, mc.cores=1)
GRangesTFBS <- toGRangesList(sitePairSet, axtHg19DanRer7)
GRangesTFBS$targetTFBS
GRangesTFBS$queryTFBS

searchPairBSgenome

searchPairBSgenome is designed to do the genome-wise phylogenetic footprinting. Given two BSgenome, a chain file for liftover from one genome to another, searchPairBSgenome identifies the putative transcription factor binding sites which are conserved in both genomes.

library(rtracklayer)
library(JASPAR2014)
library(BSgenome.Hsapiens.UCSC.hg19)
library(BSgenome.Mmusculus.UCSC.mm10)
pfm <- getMatrixByID(JASPAR2014, ID="MA0004.1")
pwm <- toPWM(pfm)
chain <- import.chain("Downloads/hg19ToMm10.over.chain")
sitePairSet <- searchPairBSgenome(pwm, BSgenome.Hsapiens.UCSC.hg19,
                                 BSgenome.Mmusculus.UCSC.mm10,
                                 chr1="chr1", chr2="chr1",
                                 min.score="90%", strand="+", chain=chain)

Use de novo motif discovery software

In this section, we will introduce wrapper functions for external motif discovery programs. So far, MEME is supported.

MEME

runMEME takes a DNAStringSet or a set of characters as input, and returns a MotifSet object.

motifSet <- runMEME(file.path(system.file("extdata",
                                          package="TFBSTools"), "crp0.s"),
                    binary="meme",
                    arguments=list("-nmotifs"=3)
                   )
## Get the sites sequences and surrounding sequences
sitesSeq(motifSet, type="all")
## Get the sites sequences only
sitesSeq(motifSet, type="none")
consensusMatrix(motifSet)

Session info

Here is the output of sessionInfo() on the system on which this document was compiled:

sessionInfo()

References



Try the TFBSTools package in your browser

Any scripts or data that you put into this service are public.

TFBSTools documentation built on Nov. 8, 2020, 8:14 p.m.