p_direction: Probability of Direction (pd)

In bayestestR: Understand and Describe Bayesian Models and Posterior Distributions

Probability of Direction (pd)

Description

Compute the Probability of Direction (pd, also known as the Maximum Probability of Effect - MPE). This can be interpreted as the probability that a parameter (described by its posterior distribution) is strictly positive or negative (whichever is the most probable). Although differently expressed, this index is fairly similar (i.e., is strongly correlated) to the frequentist p-value (see details).

Usage

p_direction(x, ...)

pd(x, ...)

## S3 method for class 'numeric'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'data.frame'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  rvar_col = NULL,
  ...
)

## S3 method for class 'MCMCglmm'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'emmGrid'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'slopes'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'stanreg'
p_direction(
  x,
  effects = c("fixed", "random", "all"),
  component = c("location", "all", "conditional", "smooth_terms", "sigma",
    "distributional", "auxiliary"),
  parameters = NULL,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'brmsfit'
p_direction(
  x,
  effects = c("fixed", "random", "all"),
  component = c("conditional", "zi", "zero_inflated", "all"),
  parameters = NULL,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'BFBayesFactor'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  ...
)

## S3 method for class 'get_predicted'
p_direction(
  x,
  method = "direct",
  null = 0,
  as_p = FALSE,
  remove_na = TRUE,
  use_iterations = FALSE,
  verbose = TRUE,
  ...
)

Arguments

x	A vector representing a posterior distribution, a data frame of posterior draws (samples be parameter). Can also be a Bayesian model.
...	Currently not used.
method	Can be "direct" or one of methods of estimate_density(), such as "kernel", "logspline" or "KernSmooth". See details.
null	The value considered as a "null" effect. Traditionally 0, but could also be 1 in the case of ratios of change (OR, IRR, ...).
as_p	If TRUE, the p-direction (pd) values are converted to a frequentist p-value using pd_to_p().
remove_na	Should missing values be removed before computation? Note that Inf (infinity) are not removed.
rvar_col	A single character - the name of an rvar column in the data frame to be processed. See example in p_direction().
effects	Should results for fixed effects, random effects or both be returned? Only applies to mixed models. May be abbreviated.
component	Should results for all parameters, parameters for the conditional model or the zero-inflated part of the model be returned? May be abbreviated. Only applies to brms-models.
parameters	Regular expression pattern that describes the parameters that should be returned. Meta-parameters (like lp__ or prior_) are filtered by default, so only parameters that typically appear in the summary() are returned. Use parameters to select specific parameters for the output.
use_iterations	Logical, if TRUE and x is a get_predicted object, (returned by insight::get_predicted()), the function is applied to the iterations instead of the predictions. This only applies to models that return iterations for predicted values (e.g., brmsfit models).
verbose	Toggle off warnings.

Value

Values between 0.5 and 1 or between 0 and 1 (see above) corresponding to the probability of direction (pd).

What is the pd?

The Probability of Direction (pd) is an index of effect existence, representing the certainty with which an effect goes in a particular direction (i.e., is positive or negative / has a sign), typically ranging from 0.5 to 1 (but see next section for cases where it can range between 0 and 1). Beyond its simplicity of interpretation, understanding and computation, this index also presents other interesting properties:

• Like other posterior-based indices, pd is solely based on the posterior distributions and does not require any additional information from the data or the model (e.g., such as priors, as in the case of Bayes factors).

• It is robust to the scale of both the response variable and the predictors.

• It is strongly correlated with the frequentist p-value, and can thus be used to draw parallels and give some reference to readers non-familiar with Bayesian statistics (Makowski et al., 2019).

Relationship with the p-value

In most cases, it seems that the pd has a direct correspondence with the frequentist one-sided p-value through the formula (for two-sided p): p = 2 * (1 - p_d) Thus, a two-sided p-value of respectively .1, .05, .01 and .001 would correspond approximately to a pd of ⁠95%⁠, ⁠97.5%⁠, ⁠99.5%⁠ and ⁠99.95%⁠. See pd_to_p() for details.

Possible Range of Values

The largest value pd can take is 1 - the posterior is strictly directional. However, the smallest value pd can take depends on the parameter space represented by the posterior.

For a continuous parameter space, exact values of 0 (or any point null value) are not possible, and so 100% of the posterior has some sign, some positive, some negative. Therefore, the smallest the pd can be is 0.5 - with an equal posterior mass of positive and negative values. Values close to 0.5 cannot be used to support the null hypothesis (that the parameter does not have a direction) is a similar why to how large p-values cannot be used to support the null hypothesis (see pd_to_p(); Makowski et al., 2019).

For a discrete parameter space or a parameter space that is a mixture between discrete and continuous spaces, exact values of 0 (or any point null value) are possible! Therefore, the smallest the pd can be is 0 - with 100% of the posterior mass on 0. Thus values close to 0 can be used to support the null hypothesis (see van den Bergh et al., 2021).

Examples of posteriors representing discrete parameter space:

• When a parameter can only take discrete values.

• When a mixture prior/posterior is used (such as the spike-and-slab prior; see van den Bergh et al., 2021).

• When conducting Bayesian model averaging (e.g., weighted_posteriors() or brms::posterior_average).

Methods of computation

The pd is defined as:

p_d = max({Pr(\hat{\theta} < \theta_{null}), Pr(\hat{\theta} > \theta_{null})})

The most simple and direct way to compute the pd is to compute the proportion of positive (or larger than null) posterior samples, the proportion of negative (or smaller than null) posterior samples, and take the larger of the two. This "simple" method is the most straightforward, but its precision is directly tied to the number of posterior draws.

The second approach relies on density estimation: It starts by estimating the continuous-smooth density function (for which many methods are available), and then computing the area under the curve (AUC) of the density curve on either side of null and taking the maximum between them. Note the this approach assumes a continuous density function, and so when the posterior represents a (partially) discrete parameter space, only the direct method must be used (see above).

Note

There is also a plot()-method implemented in the see-package.

References

• Makowski, D., Ben-Shachar, M. S., Chen, S. A., & Lüdecke, D. (2019). Indices of effect existence and significance in the Bayesian framework. Frontiers in psychology, 10, 2767. \Sexpr[results=rd]{tools:::Rd_expr_doi("10.3389/fpsyg.2019.02767")}

• van den Bergh, D., Haaf, J. M., Ly, A., Rouder, J. N., & Wagenmakers, E. J. (2021). A cautionary note on estimating effect size. Advances in Methods and Practices in Psychological Science, 4(1). \Sexpr[results=rd]{tools:::Rd_expr_doi("10.1177/2515245921992035")}

See Also

pd_to_p() to convert between Probability of Direction (pd) and p-value.

Examples

library(bayestestR)

# Simulate a posterior distribution of mean 1 and SD 1
# ----------------------------------------------------
posterior <- rnorm(1000, mean = 1, sd = 1)
p_direction(posterior)
p_direction(posterior, method = "kernel")

# Simulate a dataframe of posterior distributions
# -----------------------------------------------
df <- data.frame(replicate(4, rnorm(100)))
p_direction(df)
p_direction(df, method = "kernel")


# rstanarm models
# -----------------------------------------------
model <- rstanarm::stan_glm(mpg ~ wt + cyl,
  data = mtcars,
  chains = 2, refresh = 0
)
p_direction(model)
p_direction(model, method = "kernel")

# emmeans
# -----------------------------------------------
p_direction(emmeans::emtrends(model, ~1, "wt", data = mtcars))

# brms models
# -----------------------------------------------
model <- brms::brm(mpg ~ wt + cyl, data = mtcars)
p_direction(model)
p_direction(model, method = "kernel")

# BayesFactor objects
# -----------------------------------------------
bf <- BayesFactor::ttestBF(x = rnorm(100, 1, 1))
p_direction(bf)
p_direction(bf, method = "kernel")



# Using "rvar_col"
x <- data.frame(mu = c(0, 0.5, 1), sigma = c(1, 0.5, 0.25))
x$my_rvar <- posterior::rvar_rng(rnorm, 3, mean = x$mu, sd = x$sigma)
x
p_direction(x, rvar_col = "my_rvar")

bayestestR documentation built on Oct. 17, 2024, 5:07 p.m.