R-CMD-check Onboarding CRAN
status Downloads

Welcome to rfishbase 4. This is the fourth rewrite of the original rfishbase package described in Boettiger et al. (2012).

We welcome any feedback, issues or questions that users may encounter through our issues tracker on GitHub:


library("dplyr") # convenient but not required

Getting started

Generic table interface

All fishbase tables can be accessed by name using the fb_tbl() function:

# A tibble: 158,644 × 18
   autoctr E_CODE EcosystemRefno Speccode Stockcode Status CurrentPresence
     <int>  <int>          <int>    <int>     <int> <chr>  <chr>          
 1       1      1          50628      549       565 native Present        
 2       2      1            189      552       568 native Present        
 3       3      1            189      554       570 native Present        
 4       4      1          79732      873       889 native Present        
 5       5      1           5217      948       964 native Present        
 6       7      1          39852      956       972 native Present        
 7       8      1          39852      957       973 native Present        
 8       9      1          39852      958       974 native Present        
 9      10      1            188     1526      1719 native Present        
10      11      1            188     1626      1819 native Present        
# ℹ 158,634 more rows
# ℹ 11 more variables: Abundance <chr>, LifeStage <chr>, Remarks <chr>,
#   Entered <int>, Dateentered <dttm>, Modified <int>, Datemodified <dttm>,
#   Expert <int>, Datechecked <dttm>, WebURL <chr>, TS <dttm>

You can see all the tables using fb_tables() to see a list of all the table names (specify sealifebase if desired). Careful, there are a lot of them! The fishbase databases have grown a lot in the decades, and were not intended to be used directly by most end-users, so you may have considerable work to determine what’s what. Keep in mind that many variables can be estimated in different ways (e.g. trophic level), and thus may report different values in different tables. Also note that species is name (or SpecCode) is not always the primary key for a table – many tables are specific to stocks or even individual samples, and some tables are reference lists that are not species focused at all, but meant to be joined to other tables (faoareas, etc). Compare tables against what you see on, or ask on our issues forum for advice!

fish <- c("Oreochromis niloticus", "Salmo trutta")

fb_tbl("species") %>% 
  mutate(sci_name = paste(Genus, Species)) %>%
  filter(sci_name %in% fish) %>% 
  select(sci_name, FBname, Length)
# A tibble: 2 × 3
  sci_name              FBname       Length
  <chr>                 <chr>         <dbl>
1 Oreochromis niloticus Nile tilapia     60
2 Salmo trutta          Sea trout       140

SeaLifeBase is maintained by the same organization and largely parallels the database structure of Fishbase. As such, almost all rfishbase functions can instead be instructed to address the

fb_tbl("species", "sealifebase")
# A tibble: 103,290 × 109
   SpecCode Genus   Species Author SpeciesRefNo FBname FamCode Subfamily GenCode
      <int> <chr>   <chr>   <chr>         <int> <chr>    <int> <chr>       <int>
 1    10215 Aatola… schioe… (Mier…         3113 <NA>       521 <NA>         9254
 2    90398 Aatola… spring… Keabl…         3113 <NA>       521 <NA>         9254
 3   142030 Abaren… affinis (Ashw…        85340 <NA>       238 <NA>         9255
 4    38944 Abaren… clapar… (Levi…        85340 <NA>       238 <NA>         9255
 5    38945 Abaren… pacifi… unspe…        93817 Pacif…     238 <NA>         9255
 6    38946 Abaren… pusilla unspe…           19 <NA>       238 <NA>         9255
 7    38948 Abaren… vagabu… unspe…           19 <NA>       238 <NA>         9255
 8    28719 Abasia  pseudo… Wilso…           19 <NA>       827 <NA>         9256
 9   130412 Abathe… fissum  (Hoek…        81749 <NA>       771 <NA>         9257
10    32026 Abathe… korean… (Hiro…           19 <NA>       771 <NA>         9257
# ℹ 103,280 more rows
# ℹ 100 more variables: TaxIssue <int>, Remark <chr>, PicPreferredName <chr>,
#   PicPreferredNameM <chr>, PicPreferredNameF <chr>, PicPreferredNameJ <chr>,
#   Source <chr>, AuthorRef <int>, SubGenCode <int>, Fresh <int>, Brack <int>,
#   Saltwater <int>, Land <int>, BodyShapeI <chr>, DemersPelag <chr>,
#   AnaCat <chr>, MigratRef <int>, DepthRangeShallow <int>,
#   DepthRangeDeep <int>, DepthRangeRef <int>, DepthRangeComShallow <int>, …

Versions and importing all tables

By default, tables are downloaded the first time they are used. rfishbase defaults to download the latest available snapshot; be aware that the most recent snapshot may be months behind the latest data on Check available releases:

[1] "23.05" "23.01" "21.06" "19.04"

Low-memory environments

If you have very limited RAM (e.g. \<= 1 GB available) it may be helpful to use fishbase tables in remote form by setting collect = FALSE. This allows the tables to remain on disk, while the user is still able to use almost all dplyr functions (see the dbplyr vignette). Once the table is appropriately subset, the user will need to call dplyr::collect() to use generic non-dplyr functions, such as plotting commands.

# A tibble: 1,097,303 × 106
   catnum2 OccurrenceRefNo SpecCode Syncode Stockcode GenusCol       SpeciesCol 
     <int>           <int>    <int>   <int>     <int> <chr>          <chr>      
 1   34424           36653      227   22902       241 "Megalops"     "cyprinoid…
 2   95154           45880       NA      NA        NA ""             ""         
 3   97606           45880       NA      NA        NA ""             ""         
 4  100025           45880     5520   25676      5809 "Johnius"      "belangeri…
 5   98993           45880     5676   16650      5969 "Chromis"      "retrofasc…
 6   99316           45880      454   23112       468 "Drepane"      "punctata" 
 7   99676           45880     5388  145485      5647 "Gymnothorax"  "boschi"   
 8   99843           45880    16813  119925     15264 "Hemiramphus"  "balinensi…
 9  100607           45880     8288   59635      8601 "Ostracion"    "rhinorhyn…
10  101529           45880       NA      NA        NA "Scomberoides" "toloo-par…
# ℹ 1,097,293 more rows
# ℹ 99 more variables: ColName <chr>, PicName <chr>, CatNum <chr>, URL <chr>,
#   Station <chr>, Cruise <chr>, Gazetteer <chr>, LocalityType <chr>,
#   WaterDepthMin <dbl>, WaterDepthMax <dbl>, AltitudeMin <int>,
#   AltitudeMax <int>, LatitudeDeg <int>, LatitudeMin <dbl>, NorthSouth <chr>,
#   LatitudeDec <dbl>, LongitudeDeg <int>, LongitudeMIn <dbl>, EastWest <chr>,
#   LongitudeDec <dbl>, Accuracy <chr>, Salinity <chr>, LatitudeTo <dbl>, …

Local copy

Set the option “rfishbase_local_db” = TRUE to create a local copy, otherwise will use a remote copy. Local copy will get better performance after initial import, but may experience conflicts when duckdb is upgraded or when multiple sessions attempt to access the directory. Remove the default storage directory (given by db_dir()) after upgrading duckdb if using a local copy.

options("rfishbase_local_db" = TRUE)
db_disconnect() # close previous remote connection

conn <- fb_conn()
<duckdb_connection 9fb20 driver=<duckdb_driver b4670 dbdir='/home/cboettig/.local/share/R/rfishbase/fishbase_23.05' read_only=FALSE bigint=numeric>>

Users can trigger a one-time download of all fishbase tables (or a list of desired tables) using fb_import(). This will ensure later use of any function can operate smoothly even when no internet connection is available. Any table already downloaded will not be re-downloaded. (Note: fb_import() also returns a remote duckdb database connection to the tables, for users who prefer to work with the remote data objects.)


Interactive RStudio pane

RStudio users can also browse all fishbase tables interactively in the RStudio connection browser by using the function fisbase_pane(). Note that this function will first download a complete set of the fishbase tables.

Backwards compatibility

rfishbase 4.0 tries to maintain as much backwards compatibility as possible with rfishbase 3.0. Because parquet preserves native data types, some encoded types may differ from earlier versions. As before, these are not always the native type – e.g. fishbase encodes some boolean (logical TRUE/FALSE) values as integer (-1, 0) or character types. Use as.logical() to coerce into the appropriate type in that case.

Toggling between fishbase and sealifebase servers using an environmental variable, FISHBASE_API, is now deprecated.

Note that fishbase will store downloaded files by hash in the app directory, given by db_dir(). The default location can be set by configuring the desired path in the environmental variable, FISHBASE_HOME.

Please note that this package is released with a Contributor Code of Conduct. By contributing to this project, you agree to abide by its terms.


Try the rfishbase package in your browser

Any scripts or data that you put into this service are public.

rfishbase documentation built on June 7, 2023, 6:14 p.m.