DAISIE_SR_ML: Maximization of the loglikelihood under the DAISIE model with...

In xieshu95/Test-Trasie: Dynamical Assembly of Islands by Speciation, Immigration and Extinction

Description

This function computes the maximum likelihood estimates of the parameters of the DAISIE model with clade-specific diversity-dependence and a shift in parameters for data from lineages colonizing an island. It also outputs the corresponding loglikelihood that can be used in model comparisons.

The result of sort(c(idparsopt, idparsfix, idparsnoshift)) should be identical to c(1:10). If not, an error is reported that the input is incoherent. The same happens when the length of initparsopt is different from the length of idparsopt, and the length of parsfix is different from the length of idparsfix.
Including the 11th parameter (p_f) in either idparsopt or idparsfix (and therefore initparsopt or parsfix) is optional. If this parameter is not specified, then the information in the data is used, otherwise the information in the data is overruled.

Usage

DAISIE_SR_ML_CS(datalist, initparsopt, idparsopt, parsfix, idparsfix,
  idparsnoshift = 6:10, res = 100, ddmodel = 0, cond = 0,
  island_ontogeny = NA, tol = c(1e-04, 1e-05, 1e-07), maxiter = 1000
  * round((1.25)^length(idparsopt)), methode = "lsodes",
  optimmethod = "subplex", CS_version = 1, verbose = 0,
  tolint = c(1e-16, 1e-10))

Arguments

datalist	Data object containing information on colonisation and branching times. This object can be generated using the DAISIE_dataprep function, which converts a user-specified data table into a data object, but the object can of course also be entered directly. It is an R list object with the following elements. The first element of the list has two three components: $island_age - the island age Then, depending on whether a distinction between types is made, we have: $not_present - the number of mainland lineages that are not present on the island The remaining elements of the list each contains information on a single colonist lineage on the island and has 5 components: $colonist_name - the name of the species or clade that colonized the island $branching_times - island age and stem age of the population/species in the case of Non-endemic, Non-endemic_MaxAge and Endemic anagenetic species. For cladogenetic species these should be island age and branching times of the radiation including the stem age of the radiation. $stac - the status of the colonist * Non_endemic_MaxAge: 1 * Endemic: 2 * Endemic&Non_Endemic: 3 * Non_endemic: 4 * Endemic_MaxAge: 5 $missing_species - number of island species that were not sampled for particular clade (only applicable for endemic clades)
initparsopt	The initial values of the parameters that must be optimized
idparsopt	The ids of the parameters that must be optimized. The ids are defined as follows: id = 1 corresponds to lambda^c (cladogenesis rate) id = 2 corresponds to mu (extinction rate) id = 3 corresponds to K (clade-level carrying capacity) id = 4 corresponds to gamma (immigration rate) id = 5 corresponds to lambda^a (anagenesis rate) id = 6 corresponds to lambda^c (cladogenesis rate) after the shift id = 7 corresponds to mu (extinction rate) after the shift id = 8 corresponds to K (clade-level carrying capacity) after the shift id = 9 corresponds to gamma (immigration rate) after the shift id = 10 corresponds to lambda^a (anagenesis rate) after the shift id = 11 corresponds to the time of shift
parsfix	The values of the parameters that should not be optimized
idparsfix	The ids of the parameters that should not be optimized, e.g. c(1,3) if lambda^c and K should not be optimized.
idparsnoshift	The ids of the parameters that should not be different before and after the shift
res	Sets the maximum number of species for which a probability must be computed, must be larger than the size of the largest clade
ddmodel	Sets the model of diversity-dependence: ddmodel = 0 : no diversity dependence ddmodel = 1 : linear dependence in speciation rate ddmodel = 11: linear dependence in speciation rate and in immigration rate ddmodel = 2 : exponential dependence in speciation rate ddmodel = 21: exponential dependence in speciation rate and in immigration rate
cond	cond = 0 : conditioning on island age cond = 1 : conditioning on island age and non-extinction of the island biota
island_ontogeny	type of island ontonogeny. If NA, then constant ontogeny is assumed
tol	Sets the tolerances in the optimization. Consists of: reltolx = relative tolerance of parameter values in optimization reltolf = relative tolerance of function value in optimization abstolx = absolute tolerance of parameter values in optimization
maxiter	Sets the maximum number of iterations in the optimization
methode	Method of the ODE-solver. See package deSolve for details. Default is "lsodes"
optimmethod	Method used in likelihood optimization. Default is "subplex" (see subplex package). Alternative is 'simplex' which was the method in previous versions.
CS_version	For internal testing purposes only. Default is 1, the original DAISIE code.
verbose	sets whether parameters and likelihood should be printed (1) or not (0)
tolint	Vector of two elements containing the absolute and relative tolerance of the integration

Value

The output is a dataframe containing estimated parameters and maximum loglikelihood.

lambda_c	gives the maximum likelihood estimate of lambda^c, the rate of cladogenesis
mu	gives the maximum likelihood estimate of mu, the extinction rate
K	gives the maximum likelihood estimate of K, the carrying-capacity
gamma	gives the maximum likelihood estimate of gamma, the immigration rate
lambda_a	gives the maximum likelihood estimate of lambda^a, the rate of anagenesis
lambda_c2	gives the maximum likelihood estimate of lambda^c2, the rate of cladogenesis for the optional second group of species
mu2	gives the maximum likelihood estimate of mu2, the extinction rate for the optional second group of species
K2	gives the maximum likelihood estimate of K2, the carrying-capacity for the optional second group of species
gamma2	gives the maximum likelihood estimate of gamma2, the immigration rate for the optional second group of species
lambda_a2	gives the maximum likelihood estimate of lambda^a2, the rate of anagenesis for the optional second group of species
loglik	gives the maximum loglikelihood
df	gives the number of estimated parameters, i.e. degrees of feedom
conv	gives a message on convergence of optimization; conv = 0 means convergence

Author(s)

Rampal S. Etienne

References

Valente, L.M., A.B. Phillimore and R.S. Etienne (2015). Equilibrium and non-equilibrium dynamics simultaneously operate in the Galapagos islands. Ecology Letters 18: 844-852. <DOI:10.1111/ele.12461>.

See Also

DAISIE_loglik_all, DAISIE_sim

Examples

cat("
### When all species have the same rates, and we want to optimize all 5 parameters,
# we use:

utils::data(Galapagos_datalist)
DAISIE_ML(
   datalist = Galapagos_datalist,
   initparsopt = c(2.5,2.7,20,0.009,1.01),
   ddmodel = 11,
   idparsopt = 1:5,
   parsfix = NULL,
   idparsfix = NULL
)

### When all species have the same rates, and we want to optimize all parameters 
# except K (which we set equal to Inf), we use:

utils::data(Galapagos_datalist)
DAISIE_ML(
   datalist = Galapagos_datalist,
   initparsopt = c(2.5,2.7,0.009,1.01),
   idparsopt = c(1,2,4,5),
   parsfix = Inf,
   idparsfix = 3
   )

### When all species have the same rates except that the finches have a different
# rate of cladogenesis, and we want to optimize all parameters except K (which we
# set equal to Inf), fixing the proportion of finch-type species at 0.163, we use:

utils::data(Galapagos_datalist_2types)
DAISIE_ML(
   datalist = Galapagos_datalist_2types,
   initparsopt = c(0.38,0.55,0.004,1.1,2.28),
   idparsopt = c(1,2,4,5,6),
   parsfix = c(Inf,Inf,0.163),
   idparsfix = c(3,8,11),
   idparsnoshift = c(7,9,10)
   )

### When all species have the same rates except that the finches have a different
# rate of cladogenesis, extinction and a different K, and we want to optimize all
# parameters, fixing the proportion of finch-type species at 0.163, we use:

utils::data(Galapagos_datalist_2types)
DAISIE_ML(
   datalist = Galapagos_datalist_2types,
   ddmodel = 11,   
   initparsopt = c(0.19,0.09,0.002,0.87,20,8.9,15),
   idparsopt = c(1,2,4,5,6,7,8),
   parsfix = c(Inf,0.163),
   idparsfix = c(3,11),
   idparsnoshift = c(9,10)
   )


### When all species have the same rates except that the finches have a different
# rate of extinction, and we want to optimize all parameters except K (which we 
# set equal to Inf), and we also# want to estimate the fraction of finch species
# in the mainland pool. we use:

utils::data(Galapagos_datalist_2types)
DAISIE_ML(
   datalist = Galapagos_datalist_2types,
   initparsopt = c(2.48,2.7,0.009,1.01,2.25,0.163),
   idparsopt = c(1,2,4,5,7,11),
   parsfix = c(Inf,Inf),
   idparsfix = c(3,8),
   idparsnoshift = c(6,9,10)
   )

### When we have two islands with the same rates except for immigration and anagenesis rate,
# and we want to optimize all parameters, we use:

utils::data(Galapagos_datalist)
DAISIE_ML(
   datalist = list(Galapagos_datalist,Galapagos_datalist),
   datatype = 'multiple',
   initparsopt = c(2.5,2.7,20,0.009,1.01,0.009,1.01),
   idparsmat = rbind(1:5,c(1:3,6,7)),
   idparsopt = 1:7,
   parsfix = NULL,
   idparsfix = NULL
)

### When we consider the four Macaronesia archipelagoes and set all parameters the same
# except for rates of cladogenesis, extinction and immigration for Canary Islands,
# rate of cladogenesis is fixed to 0 for the other archipelagoes,
# diversity-dependence is assumed to be absent
# and we want to optimize all parameters, we use:

utils::data(Macaronesia_datalist)
DAISIE_ML(
   datalist = Macaronesia_datalist,
   datatype = 'multiple',
   initparsopt = c(1.053151832,0.052148979,0.512939011,0.133766934,0.152763179),
   idparsmat = rbind(1:5,c(6,2,3,7,5),1:5,1:5),
   idparsopt = c(2,4,5,6,7),
   parsfix = c(0,Inf),
   idparsfix = c(1,3)
)
   
")

xieshu95/Test-Trasie documentation built on Dec. 18, 2019, 7:34 a.m.