sienaGOF: Functions to assess goodness of fit for SAOMs

In RSiena: Siena - Simulation Investigation for Empirical Network Analysis

Functions to assess goodness of fit for SAOMs

Description

The function sienaGOF assesses goodness of fit for a model specification as represented by an estimated sienaFit object created by siena07. This is done by simulations of auxiliary statistics, that differ from the statistics used for estimating the parameters. The auxiliary statistics must be given explicitly.

The fit is good if the average values of the auxiliary statistics over many simulation runs are close to the values observed in the data. A Monte Carlo test based on the Mahalanobis distance is used to calculate frequentist p-values.

Plotting functions can be used to diagnose bad fit. There are basic functions for calculating auxiliary statistics available out of the box, and the user is invited to create additional ones.

Usage

sienaGOF(sienaFitObject, auxiliaryFunction,
        period=NULL, verbose=FALSE, join=TRUE, twoTailed=FALSE,
        cluster=NULL, robust=FALSE, groupName="Data1",
        varName, tested=NULL, iterations=NULL, giveNAWarning=TRUE, ...)
## S3 method for class 'sienaGOF'
plot(x, center=FALSE, scale=FALSE, violin=TRUE, key=NULL,
        perc=.05, period=1, position=4, fontsize=12, ...)
descriptives.sienaGOF(x, center=FALSE, scale=FALSE, perc=.05, key=NULL,
        period=1, showAll=FALSE)

Arguments

sienaFitObject	An object of class sienaFit, produced by a call to siena07 with returnDeps = TRUE and maxlike=FALSE (the latter is the default, the former is not); or a list of such objects; if a list, then the first period of each sienaFit object will be used. If this is a list of sienaFit objects, where sienaFitObject is mentioned below, it refers to the first element of this list.
auxiliaryFunction	Function to be used to calculate the auxiliary statistics; this can be a user-defined function, e.g. depending on the sna or igraph packages. See Examples and sienaGOF-auxiliary for more information on the signature of this function. The basic signature is function(index, data, sims, period, groupName, varName, ...), where index is the index of the simulated network, or NULL if the observed variable is needed; data is the observed data object from which the relevant variables are extracted; sims is the list of simulations returned from siena07; period is the index of the period; and ... are further arguments (like levls in the examples below and in sienaGOF-auxiliary).
period	Vector of period(s) to be used (may run from 1 to number of waves - 1). Has an effect only if join=FALSE. May be only a single number if sienaFitObject is a list of sienaFit objects.
verbose	Whether to print intermediate results. This may give some peace of mind to the user because calculations can take some time.
join	Boolean: should sienaGOF do tests on all of the periods individually (FALSE), or sum across periods (TRUE)?
twoTailed	Whether to use two tails for calculating p-values on the Monte Carlo test. Recommended for advanced users only, as it is probably only applicable in rare cases.
cluster	Optionally, a parallel or snow cluster to execute the auxiliary function calculations on.
robust	Whether to use robust estimation of the covariance matrix.
groupName	Name of group; relevant for multi-group data sets.
varName	Name of dependent variable.
tested	A logical vector of length sienaFitObject$pp (number of parameters), indicating a subset of tested parameters; or NULL, indicating all tested parameters (see below); or FALSE, indicating nothing is to be tested.
iterations	Number of iterations for the goodness of fit calculations. If NULL, the number of simulated data sets in sienaFitObject.
giveNAWarning	If TRUE, a warning is given if any simulated values are missing.
x	Result from a call to sienaGOF.
center	Whether to center the statistics by median during plotting.
scale	Whether to scale the statistics by range during plotting. scale=TRUE makes little sense without also center=TRUE.
violin	Use violin plots (vs. box plots only)?
key	Keys in the plot for the levels of the auxiliary statistic (as given by parameter levls in the examples).
perc	1 minus confidence level for the confidence bands (two sided).
position	Position where the observed value is plotted: 1=under, 2=to the left, 3=above, 4=to the right of the red dot. Can be a single number from 1 to 4, or a vector with positions for each statistic (possibly recycled).
fontsize	Font size for the observed values plotted.
...	Other arguments; for sienaGOF(), e.g., levls as a parameter for the auxiliary statistic in sienaGOF-auxiliary; for plot.sienaGOF(), e.g., the usual plotting parameters main, xlab, ylab, cex, cex.main, cex.lab, and cex.axis.
showAll	If FALSE, drops statistics with variance 0, like in the plot.

Details

This function is used to assess the goodness of fit of an estimated stochastic actor-oriented model for an arbitrarily defined multidimensional auxiliary statistic. It operates basically by comparing the observed values, at the ends of the periods, with the simulated values for the ends of the periods. The differences are assessed by combining the components of the auxiliary statistic using the Mahalanobis distance.

For sienaFitObjects that were made for a multi-group data set, if you are not sure about the groupNames to use, these can be retrieved by the command "names(dataObject)" (where dataObject is the data used to produce the sienaFitObject). Mostly they are "Data1", "Data2", etc.

To save computation time, iterations can be set to a lower number than what is available in sienaFitObject; this will yield a less precise result.

The function does not work properly for data sets that include a sienaCompositionChange object. If you wish to test the fit for such a data set, you need (for the purpose of fit assessment only) to replace the data set by a data set where absent actors are represented by structural zeros, and estimate the same model for this data set with the corresponding effects object, and use sienaGOF for this sienaFit object.

To achieve comparability between simulated and observed dependent variables, variables that are missing in the data at the start or end of a period are replaced by 0 (for tie variables) or NA (for behavior variables).
If there are any differences between structural values at the beginning and at the end of a period, these are dealt with as follows. For tie variables that have a structural value at the start of the period, this value is used to replace the observed value at the end of the period (for the goodness of fit assessment only). For tie variables that have a structural value at the end of the period but a free value value at the start of the period, the reference value for the simulated values is lacking; therefore, the simulated values at the end of the period then are replaced by the structural value at the end of the period (again, for the goodness of fit assessment only).

The auxiliary statistics documented in sienaGOF-auxiliary are calculated for the simulated dependent variables in Phase 3 of the estimation algorithm, returned in sienaFitObject because of having used returnDeps = TRUE in the call to siena07. These statistics should be chosen to represent features of the network that are not explicitly fit by the estimation procedure but can be considered important properties that the model at hand should represent well. Some examples are:

• Outdegree distribution

• Indegree distribution

• Distribution of the dependent behavior variable (if any).

• Distribution of geodesic distances

• Triad census

• Edgewise homophily counts

• Edgewise shared partner counts

• Statistics depending on the combination of network and behavioral variables.

The function is written so that the user can easily define other functions to capture some other relevant aspects of the network, behaviors, etc. This is further illustrated in the help page sienaGOF-auxiliary.

We recommend the following heuristic approach to model checking:

1. Check convergence of the estimation.

2. Assess goodness of fit (primarily using join=TRUE) on auxiliary statistics, and if necessary refine the model.

3. Assess time heterogeneity by sienaTimeTest and if there is evidence for time heterogeneity either modify the base effects or include time dummy terms.

No general rules can be given about whether time heterogeneity (sienaTimeTest) or goodness of fit using sienaGOF have precedence. This is an explorative issue.

The summary function will display some useful information to help with model selection if some effects are set in the effects object to be fixed and tested. In that case, for all parameters indicated in the vector tested, a rough estimator is computed for the Mahalanobis distance that would be obtained at each proposed specification. This is then given in the summary. This can help guide model selection. This estimator is called the modified Mahalanobis distance (MMD). See Lospinoso and Snijders (2019) or the manual for more information.

The following functions are pre-fabricated for ease of use, and can be passed in as the auxiliaryFunction with no extra effort; see sienaGOF-auxiliary and the examples below.

• IndegreeDistribution

• OutdegreeDistribution

• BehaviorDistribution

• TriadCensus

• mixedTriadCensus

• dyadicCov

Value

sienaGOF returns a result of class sienaGOF; this is a list of elements of class sienaGofTest; if join=TRUE, the list has length 1; if join=FALSE, each list element corresponds to a period analyzed; the list elements are themselves lists again, including the following elements:

- sienaFitName	The name of sienaFitObject.
- auxiliaryStatisticName	The name of auxiliaryFunction.
- Observations	The observed values for the auxiliary statistics.
- Simulations	The simulated auxiliary statistics.
- ObservedTestStat	The observed Mahalanobis distance in the data.
- SimulatedTestStat	The Mahalanobis distance for the simulations.
- TwoTailed	Whether the p-value corresponds to a one- or two-tailed Monte Carlo test.
- p	The p-value for the observed Mahalanobis distance in the permutation distribution of the simulated Mahalanobis distances.
- Rank	Rank of the covariance matrix of the simulated auxiliary statistics.

In addition there are several attributes which give, for model specifications with fixed-and-tested effects, approximations to the expected Mahalanobis distance for model specifications where each of these effects would be added. This is reported in the summary method.
The plot method makes violin plots or box plots, with superimposed confidence bands, for the simulated distributions of all elements of the auxiliaryFunction, with the observed values indicated by red dots; but statistics with variance 0 are dropped.

descriptives.sienaGOF returns a matrix giving numerical information about what is plotted in the plot method: maximum, upper percentile, mean, median, lower percentile, minimum, and standard deviation of the simulated distributions of the auxiliary statistics, the observed values, and the proportions of simulated values greater and greater-or-equal than the observed values. If center=TRUE the median is subtracted from mean, median, and percentiles; if scale=TRUE these numbers and the standard deviation are divided by (maximum - minimum).
If showAll=FALSE, statistics with variance 0 will be dropped.

Author(s)

Josh Lospinoso, modifications by Ruth Ripley and Tom Snijders

References

Lospinoso, J.A. and Snijders, T.A.B. (2019, Goodness of fit for stochastic actor-oriented models. Methodological Innovations, 12:2059799119884282.

Also see https://www.stats.ox.ac.uk/~snijders/siena/

See Also

siena07, sienaGOF-auxiliary, sienaTimeTest

Examples

mynet <- sienaDependent(array(c(s501, s502), dim=c(50, 50, 2)))
mybeh <- sienaDependent(s50a[,1:2], type="behavior")
mydata <- sienaDataCreate(mynet, mybeh)
myeff <- getEffects(mydata)
myeff <- includeEffects(myeff, transTrip)
myeff <- setEffect(myeff, cycle3, fix=TRUE, test=TRUE)
myeff <- setEffect(myeff, transTies, fix=TRUE, test=TRUE)
myalgorithm <- sienaAlgorithmCreate(nsub=1, n3=10, projname=NULL)
# Shorter phases 2 and 3, just for example.
ans <- siena07(myalgorithm, data=mydata, effects=myeff, batch=TRUE, returnDeps=TRUE)
gofi <- sienaGOF(ans, IndegreeDistribution, verbose=TRUE, join=TRUE,
  varName="mynet")
summary(gofi)
plot(gofi)

# Illustration just for showing a case with two dependent networks;
# running time backwards is not meaningful!
mynet1 <- sienaDependent(array(c(s501, s502), dim=c(50, 50, 2)))
mynet2 <- sienaDependent(array(c(s503, s501), dim=c(50, 50, 2)))
mybeh <- sienaDependent(s50a[,1:2], type="behavior")
mydata <- sienaDataCreate(mynet1, mynet2, mybeh)
myeff <- getEffects(mydata)
myeff <- includeEffects(myeff, transTrip)
myeff <- includeEffects(myeff, recip, name="mynet2")
# Shorter phases 2 and 3, just for example.
ans <- siena07(myalgorithm, data=mydata, effects=myeff, batch=TRUE, returnDeps=TRUE)
gofi <- sienaGOF(ans, IndegreeDistribution, verbose=TRUE, join=TRUE,
  varName="mynet1")
summary(gofi)
plot(gofi)

## Not run: 
(gofi.nc <- sienaGOF(ans, IndegreeDistribution, cumulative=FALSE,
    varName="mynet1"))
# cumulative is an example of "...".
plot(gofi.nc)
descriptives.sienaGOF(gofi.nc)

(gofi2 <- sienaGOF(ans, IndegreeDistribution, varName="mynet2"))
plot(gofi2)

(gofb <- sienaGOF(ans, BehaviorDistribution, varName = "mybeh"))
plot(gofb)

(gofo <- sienaGOF(ans, OutdegreeDistribution, varName="mynet1",
    levls=0:6, cumulative=FALSE))
# levls is another example of "...".
plot(gofo)

## End(Not run)

## A demonstration of using multiple processes
## Not run: 
library(parallel)
(n.clus <- detectCores() - 1)
n.clus <- min(n.clus, 4)  # keep time for other processes
myalgorithm.c <- sienaAlgorithmCreate(nsub=4, n3=1000, seed=1265)
(ans.c <- siena07(myalgorithm.c, data=mydata, effects=myeff, batch=TRUE,
    returnDeps=TRUE, useCluster=TRUE, nbrNodes=n.clus))
gofi.1 <- sienaGOF(ans.c, TriadCensus, verbose=TRUE, varName="mynet1")
cl <- makeCluster(n.clus)
gofi.cl <- sienaGOF(ans.c, TriadCensus, varName="mynet1", cluster=cl)
cl2 <- makeCluster(2)
gofi.cl2 <- sienaGOF(ans.c, TriadCensus, varName="mynet1", cluster=cl2)
# compare simulation times
attr(gofi.1,"simTime")
attr(gofi.cl,"simTime")
attr(gofi.cl2,"simTime")

## End(Not run)

RSiena documentation built on June 22, 2024, 11:05 a.m.