truthTable: Create a truth table

Description Usage Arguments Details Value Author(s) References See Also Examples

Description

Function to create a truth table from all types of calibrated data (binary crisp, multi-value crisp and fuzzy). For fuzzy data, an improved verson of Ragin's (2008) procedure is applied to assign cases to the vector space corners (the truth table rows).

Usage

1
2
3
truthTable(data, outcome = "", conditions = "", incl.cut = 1, n.cut = 1, pri.cut = 0,
           exclude = NULL, complete = FALSE, use.letters = FALSE, show.cases = FALSE,
           dcc = FALSE, sort.by = "", inf.test = "", ...)

Arguments

data

A data frame containing calibrated causal conditions and an outcome.

outcome

String, the name of the outcome.

conditions

A single string containing the conditions' (columns) names separated by commas, or a character vector of conditions' names.

incl.cut

The inclusion cut-off(s): either a single value for the presence of the output, or a vector of length 2, the second for the absence of the output.

n.cut

The minimum number of cases under which a truth table row is declared as a remainder.

pri.cut

The minimal score for the PRI - proportional reduction in inconsistency, under which a truth table row is declared as negative.

exclude

A vector of (remainder) row numbers from the truth table, to code as negative output configurations.

complete

Logical, print complete truth table.

use.letters

Logical, use letters instead of causal conditions' names.

show.cases

Logical, print case names.

dcc

Logical, if show.cases = TRUE, the cases being displayed are the deviant cases consistency in kind.

sort.by

Sort the truth table according to various columns.

inf.test

Specifies the statistical inference test to be performed (currently only "binom") and the critical significance level. It can be either a vector of length 2, or a single string containing both, separated by a comma.

...

Other arguments (mainly for backward compatibility).

Details

The data should always be provided as a data frame, with calibrated columns.

Calibration can be either crisp, with 2 or more values starting from 0, or fuzzy with continous scores from 0 to 1. Raw data containing relative frequencies can also be continous between 0 and 1, but these are not calibrated, fuzzy data.

Some columns can contain the placeholder "-" indicating a “don't care”, which is used to indicate the temporal order between other columns in tQCA. These special columns are not causal conditions, hence no parameters of fit will be calculated for them.

The argument outcome specifies the column name to be explained. If the outcome is a multivalue column, it can be specified in curly bracket notation, indicating the value to be explained (the others being automatically converted to zero).

The outcome can be negated using a tilde operator ~X. The logical argument neg.out is now deprecated, but still backwards compatible. Replaced by the tilde in front of the outcome name, it controls whether outcome is to be explained or its negation. Note that using both neg.out = TRUE and a tilde ~ in the outcome name cancel each other out.

If the outcome column is multi-value, the argument outcome should use the standard curly-bracket notation X{value}. Multiple values are allowed, separated by a comma (for example X{1,2}). Negation of the outcome can also be performed using the tilde ~ operator, for example ~X{1,2}, which is interpreted as: "all values in X except 1 and 2" and it becomes the new outcome to be explained.

The argument conditions specifies the causal conditions' names among the other columns in the data. When this argument is not specified, all other columns except for the outcome are taken as causal conditions.

A good practice advice is to specify both outcome and conditions as upper case letters. It is possible, in a next version, to negate outcomes using lower case letters, a situation where it really does matter how the outcome and/or conditions are specified.

The argument incl.cut replaces both (deprecated, but still backwards compatible) former arguments incl.cut1 and incl.cut0. Most of the analyses use the inclusion cutoff for the presence of the output (code "1"). When users need both inclusion cutoffs (see below), incl.cut can be specified as a vector of length 2, in the form: c(ic1, ic0) where:

ic1 is the inclusion cutoff for the presence of the output,
a minimum sufficiency inclusion score above which the output value is coded with "1".
ic0 is the inclusion cutoff for the absence of the output,
a maximum sufficiency inclusion score below which the output value is coded with "0".

If not specifically declared, the argument ic0 is automatically set equal to ic1, but otherwise ic0 should always be lower than ic1.

Using these two cutoffs, as well as pri.cut the observed combinations are coded with:

"1" if they have an inclusion score of at least ic1
and a PRI score of at least pri.cut
"C" if they have an inclusion score below ic1 and at least ic0 (contradiction)
"0" if they have an inclusion score below ic0 or
a PRI score below pri.cut

The argument n.cut specifies the frequency threshold under which a truth table row is coded as a remainder, irrespective of its inclusion score.

When argument show.cases is set to TRUE, the case names will be printed at their corresponding row in the truth table. The resulting object always contains the cases for each causal combination, even if not printed on the screen (the print function can later be used to print them).

The sort.by argument orders all configurations by any of the columns present in the truth table. Typically, sorting occurs by their outcome value, and/or by their inclusion score, and/or by their frequency, in any order.

Sorting decreasingly (the default) or increasingly can be specified adding the signs - or +, next after the column name in argument sort.by (see examples). Note that - is redundant because it is the default anyways.

The order specified in this vector is the order in which the configurations will be sorted. When sorting based on the OUTput column, remainders will always be sorted last.

The argument use.letters controls using the original names of the causal conditions, or replace them by single letters in alphabetical order. If the causal conditions are already named with single letters, the original letters will be used.

The argument inf.test combines the inclusion score with a statistical inference test, in order to assign values in the output column OUT. For the moment, it is only the binomial test, which needs crisp data (it doesn't work with fuzzy sets). Following a similar logic as above, for a given (specified) critical significance level, the output for a truth table row will be coded as:

"1" if the true inclusion score is significanly higher than ic1,
"C" contradiction, if the true inclusion score is not significantly higher than ic1
but significantly higher than ic0,
"0" if the true inclusion score is not significantly higher than ic0.

It should be noted that statistical tests perform well only when the number of cases is large, otherwise they are usually not significant. For a low number of cases, depending on the inclusion cutoff value(s), it will be harder to code a value of "1" in the output, and also harder to obtain contradictions if the true inclusion is not signficantly higher than ic0.

The argument complete controls how to print the table on the screen, either complete (when set to TRUE), or just the observed combinations (default). For up to 7 causal conditions, the resulting object will always contain the complete truth table, even if it's not printed on the screen. This is useful for multiple reasons: researchers like to manually change output values in the truth table (sometimes including in this way a remainder, for example), and it is also useful to plot Venn diagrams, each truth table row having a correspondent intersection in the diagram.

Value

An object of class "tt", a list containing the following components:

tt The truth table itself.
indexes The line numbers for the observed causal configurations.
noflevels A vector with the number of values for each causal condition.
initial.data The initial data.
recoded.data The crisp version of the initial.data, if fuzzy.
cases The cases for each observed causal configuration.
options The command options used.
rowsorder The order of the rows after sorting, if using sort.by.
minmat The membership scores matrix of cases in the observed truth table combinations.

Author(s)

Adrian Dusa

References

Cronqvist, L.; Berg-Schlosser, D. (2009) “Multi-Value QCA (mvQCA)”, in Rihoux, B.; Ragin, C. (eds.) Configurational Comparative Methods. Qualitative Comparative Analysis (QCA) and Related Techniques, SAGE.

Dusa, A. (2019) QCA with R. A Comprehensive Resource. Springer International Publishing, DOI: 10.1007/978-3-319-75668-4.

Lipset, S.M. (1959) “Some Social Requisites of Democracy: Economic Development and Political Legitimacy”, American Political Science Review vol.53, pp.69-105.

Ragin, C.C. (1987) The Comparative Method: Moving beyond Qualitative and Quantitative Strategies. Berkeley: University of California Press.

Ragin, C.C. (2008) Redesigning Social Inquiry: Fuzzy Sets and Beyond. Chicago: University of Chicago Press.

Ragin, C.C.; Strand, S.I. (2008) “Using Qualitative Comparative Analysis to Study Causal Order: Comment on Caren and Panofsky (2005).” Sociological Methods & Research vol.36, no.4, pp.431-441.

Schneider, C.Q.; Wagemann, C. (2012) Set-Theoretic Methods for the Social Sciences: A Guide to Qualitative Comparative Analysis (QCA). Cambridge: Cambridge University Press.

See Also

minimize

Examples

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
# -----
# Lipset binary crisp data
ttLC <- truthTable(LC, "SURV")

# inspect the truth table
ttLC

# print the cases too, even if not specifically asked for
print(ttLC, show.cases = TRUE)

# the printing function also supports the complete version
print(ttLC, show.cases = TRUE, complete = TRUE)

# formally asking the complete version
truthTable(LC, "SURV", complete = TRUE)

# sorting by multiple columns, decreasing by default
truthTable(LC, "SURV", complete = TRUE, sort.by = "incl, n")

# sort the truth table decreasing for inclusion, and increasing for n
# note that "-" is redundant, sorting is decreasing by default 
truthTable(LC, "SURV", complete = TRUE, sort.by = "incl-, n+")


# -----
# Lipset multi-value crisp data (Cronqvist & Berg-Schlosser 2009, p.80)
truthTable(LM, "SURV", sort.by = "incl")

# using a frequency cutoff equal to 2 cases
ttLM <- truthTable(LM, "SURV", n.cut = 2, sort.by = "incl")
ttLM

# the observed combinations coded as remainders
ttLM$removed


# -----
# Cebotari & Vink fuzzy data
ttCVF <- truthTable(CVF, "PROTEST", incl.cut = 0.8, sort.by = "incl")

# view the Venn diagram for this truth table
library(venn)
venn(ttCVF)

# each intersection transparent by its inclusion score
venn(ttCVF, transparency = ttCVF$tt$incl)

# the truth table negating the outcome
truthTable(CVF, "~PROTEST", incl.cut = 0.8, sort.by = "incl")

# allow contradictions
truthTable(CVF, "PROTEST", incl.cut = c(0.8, 0.75), sort.by = "incl")


# -----
# Ragin and Strand data with temporal QCA
# truth table containing the "-" placeholder as a "don't care"
truthTable(RS, "REC")

QCA documentation built on Nov. 29, 2020, 3:01 p.m.

Related to truthTable in QCA...