inst/skills/upgrade-extension-package/SKILL.md

In mizer: Dynamic Multi-Species Size Spectrum Modelling

name: upgrade-extension-package description: >- Bring an existing mizer extension package up to date with a newer mizer. Use when a package written against an earlier mizer needs migrating to the S3 MizerParams and the simplified extension mechanism; when its methods have stopped dispatching, its S4 marker classes or registerExtension() calls have to go, or its tests fail on mizer's new reports; or when a workaround it carries is no longer needed. Only for a genuine extension — one that declares marker classes, registers methods on mizer's generics, installs a rate function or registers a component — and only in addition to the upgrade-mizer-code skill, which covers everything a package does as ordinary user code, including the version floor, docs and test suite of any package that merely calls mizer. For writing a new extension package use the create-extension-package skill.

Upgrading your extension package

This article is for the maintainer of an existing mizer extension package — mizerShelf, mizerMR, mizerStarvation, therMizer or your own — bringing it up to date with a newer mizer. It has two halves:

• Part 1 is the one-off migration to mizer's S3 architecture and simplified extension mechanism (mizer 3.4). Every package written against mizer 3.3 or earlier needs it.
• Part 2 collects the other mizer changes that land specifically on extension code — methods that no longer dispatch, workarounds that can be dropped, tests that now fail. These are release-by-release and each one is independent of the S3 migration.

It covers only what is specific to being an extension.

Before you start: is this an extension?

Not every package that depends on mizer is a mizer extension, and only an extension needs this article. Look for any of these:

• setClass() declaring a marker class, or .onLoad() calling registerExtension() / registerExtensions()
• methods on mizer's own generics — project.myClass, setParams.myClass, steadySingleSpecies.myClass
• a rate function installed with setRateFunction(), or a component registered with setComponent()

A package with none of them — one that only calls mizer, however extensively, like mizerExperimental — is ordinary user code in a package wrapper. The upgrade-mizer-code skill covers it in full, including its "If your code is a package" section. Stop here and use that.

Everything in this article is in addition to that skill, not instead of it. Work through the upgrade-mizer-code skill first — its code-pattern index for the asymptomatic changes, its symptom index for anything that broke, and its package section for the version floor, the changelog, the docs and the test suite. Then come back here for what only an extension has to do. For what the finished package should look like, rather than how to get there, read the create-extension-package skill: this article does not repeat its rules, and its checklist for package authors is the acceptance test for a migrated package.

Symptom index

| Symptom | Cause | Section | |---|---|---| | is() / setClass() / expect_s4_class() in the package, or .onLoad() calling registerExtension() / getRegisteredExtensions() | written against the S4 mizer | Part 1 | | After rm(list = ls()), or in the second and later examples of R CMD check, mizer reports the extension's class is not a defined class | the dynamic S4 marker classes lived in .GlobalEnv | Part 1 — the mechanism is gone, migrate rather than repair | | After devtools::load_all(), coerceToExtensionClass() reports no method or default for coercing MizerParams | same obsolete marker-class machinery | Part 1 | | The package's results are unchanged when the model is switched to second_order_w = TRUE, or a diagnostic is out by a constant factor | the extension's own integrals ignore the bin_average flag | Working under both numerical schemes | | A component's state advances twice as far per step, or its dynamics_fun double-counts, under method = "second_order" ("tr_bdf2") or "predictor_corrector" | the second-order steppers call dynamics_fun twice per step, from the same start-of-step state | Working under both numerical schemes | | A method the package defines is never called, and its name starts with get | the get-prefixed accessors are plain aliases now; dispatch happens on the bare name | Methods on the renamed rate-array accessors | | steady.MyClass runs but tuneSteadyState() ignores it | the new names are separate generics | Methods on the steady-state finders | | The package removes a species parameter column by writing into params@species_params | supported route exists since 3.3.1 | Withdrawing a species parameter column | | The package declares the current gamma as a given species parameter to stop it moving | the default is measured on mizer's own reference state now | The gamma/f0 workaround can go | | Tests fail on message wording, or on a call that used to be silent | new reports and rephrased messages | Tests that match messages or assert silence | | Links to articles/creating-extension-packages.html, articles/extending-mizer.html, vignette("cheatsheet-…") | the articles were renamed to guides | Links to renamed articles and skills |

Part 1 — the S3 extension mechanism

What changed in mizer

Starting with mizer 3.3.0.9000 / 3.4:

1. MizerParams and MizerSim are S3 classes. They are stored as lists with class vectors c("MizerParams") and c("MizerSim").
2. S3 extension classes: an extension package prepends its class name to the S3 class vector — c("mizerShelf", "MizerParams") for params, and c("mizerShelfSim", "MizerSim") for simulations.
3. Session registration is obsolete: registerExtension() and the dynamic S4 marker classes created at package load time have been removed.
4. No .onLoad hook or active bindings needed: bundled datasets saved as S3 objects retain their class vectors and extension metadata under standard R lazy-loading.
5. Extension tracking via recordExtension(): the extension requirement and package version are recorded in params$extensions (or params@extensions).
6. Class coercion via coerceToExtensionClass(): it reads params$extensions and sets the S3 class vector accordingly. project() automatically coerces its MizerSim output to the corresponding …Sim extension class.

Step by step

1. Clean up R/<pkgname>-package.R

Remove .onLoad() entirely (and delete R/zzz.R if it held only .onLoad()), or the registerExtension() and makeActiveBinding() calls within it if it does anything else.

• Remove registerExtension(): session registration is no longer used.
• Remove makeActiveBinding(): datasets in data/ now carry their S3 class directly.
• Remove @importFrom methods is: replace is(x, "MizerParams") in code with inherits(x, "MizerParams").
• Remove deleted files from Collate:: if DESCRIPTION has a manual Collate: field, remove zzz.R (or whichever file held .onLoad()) from it.

# BEFORE:
.onLoad <- function(libname, pkgname) {
    mizer::registerExtension(pkgname, requirement = "sizespectrum/myExtension")
    if (exists("my_params", envir = asNamespace(pkgname), inherits = FALSE)) {
        ns <- asNamespace(pkgname)
        raw <- get("my_params", envir = ns)
        makeActiveBinding("my_params",
                          fun = function() mizer::coerceToExtensionClass(raw),
                          env = ns)
    }
}

# AFTER:
# Delete .onLoad() completely if there are no other load actions.

2. Delete every marker class declaration

An extension class is now an ordinary entry in the object's S3 class vector, so nothing has to be declared. Delete

setClass("myExtension", contains = "MizerParams")
setClass("myExtensionSim", contains = "MizerSim")

and, if the package carried the workaround for the marker classes being wiped by rm(list = ls()) or by the cleanEx() that R CMD check runs before every example, delete that too:

setClass("myExtension", contains = "MizerParams", where = globalenv())

Both are actively harmful now: a sealed S4 class of the same name cannot be re-parented, which is what prevented two independently developed extensions from being chained in either load order.

Then check NAMESPACE and the roxygen comments for @exportClass, @importClassesFrom mizer and setValidity() on those names, and remove those as well. devtools::document() will not drop a stale exportClasses() line while the setClass() is still there.

3. Update the class documentation

Rewrite the roxygen block that documented the extension class:

#' myExtension extension classes
#'
#' S3 extension classes for [MizerParams] and [MizerSim] that enable S3 dispatch
#' for extension-specific methods.
#'
#' The class names are ordinary entries in the object's S3 class vector. All
#' extension-specific data lives in `other_params(params)` or in component
#' parameters (see [setComponent()]).
#'
#' Objects of class `myExtension` are created by [newMyExtensionParams()].
#' Objects of class `myExtensionSim` are returned automatically by [project()]
#' when called on a `myExtension` params object.
#'
#' No class declaration is needed. [newMyExtensionParams()] records the
#' extension on the object with [mizer::recordExtension()] and then calls
#' [mizer::coerceToExtensionClass()].
#'
#' @name myExtension-class
#' @keywords internal
NULL

4. Update constructors and setup functions

Every constructor and setup function should

1. call recordExtension() with the package name, version and explicit requirement = "<owner>/<repo>" (now required since session registration no longer supplies it), and
2. call coerceToExtensionClass(params), for a dispatching extension.

params <- mizer::recordExtension(
    params, "myExtension",
    version = as.character(utils::packageVersion("myExtension")),
    requirement = "sizespectrum/myExtension"
)
params <- mizer::coerceToExtensionClass(params)

For a metadata-only extension such as mizerStarvation, call recordExtension() and omit coerceToExtensionClass().

5. Migrate bundled data objects in data/

MizerParams and MizerSim objects in data/ that were stored as S4 objects have to be upgraded to S3 and re-saved. Run this once, per object:

library(mizer)
load("data/my_params.rda")

# Convert S4 to S3 list if needed
p <- mizer:::upgrade_s4_to_s3(my_params)
class(p) <- c("myExtension", "MizerParams")
p <- recordExtension(
    p, "myExtension",
    version = as.character(utils::packageVersion("myExtension")),
    requirement = "sizespectrum/myExtension"
)
p <- validParams(p)

my_params <- p
save(my_params, file = "data/my_params.rda", compress = "bzip2")

and update the documentation in R/data.R:

#' @format A [myExtension-class] object.
#'
#' The object was created with [newMyExtensionParams()] and is stored in
#' the package's `data/` directory. R's standard lazy-loading preserves its S3
#' class vector and extension metadata, so no load hook or active binding is
#' needed.

6. Replace S4 assertions and type checks

• Replace is(x, "MizerParams") and is(x, "MizerSim") with inherits(x, "MizerParams") and inherits(x, "MizerSim").
• In tests/testthat/, replace expect_s4_class() with expect_s3_class() throughout — for MizerParams and MizerSim as well as for your own myExtension and myExtensionSim.
• Replace any assertions on mizer::getRegisteredExtensions() with assertions on mizer::getMetadata(params)$extensions (e.g., checking getMetadata(params)$extensions$myExtension$version and $requirement).

7. Provide an upgrade method if layout has evolved

If your extension's internal layout has changed across versions, register an idempotent S3 method for utils::upgrade() so that older saved objects are migrated automatically when validated. See "Upgrading objects across versions of your extension" in the create-extension-package skill:

#' @exportS3Method utils::upgrade
upgrade.myExtension <- function(object, ...) {
    # Detect old layout and migrate idempotently
    object
}

8. Update DESCRIPTION

• Remove methods from Imports: if it was there only for the S4 checks.
• Require mizer (>= 3.3.0.9000), or mizer (>= 3.4.0) once that is released.
• If DESCRIPTION has an explicit Collate: field, update it to remove deleted files (such as zzz.R) and include any new ones (such as upgrade.R).

9. Update vignettes, narrative docs and NEWS.md

• Wherever a vignette describes S4 marker classes, .onLoad() or registerExtension(), replace it with S3 extension classes, recordExtension() and coerceToExtensionClass().
• Record the change in NEWS.md:

markdown - Replaced obsolete session extension registration and dynamic S4 marker classes with mizer's simpler S3 extension mechanism. Stored parameter objects are now S3 objects with extension class vector `c("<pkg>", "MizerParams")`, removing the need for a load hook or an active binding.

10. Document, test and check

devtools::document()   # updates NAMESPACE and man/*.Rd
devtools::test()       # run test suite
devtools::check()      # verify full package build and vignettes

Part 2 — other mizer changes that hit extension code

Work through these whatever the state of the S3 migration; none of them depends on it.

Working under both numerical schemes

Mizer's numerics are no longer a single scheme. The second_order_w slot selects how the model is discretised in size — flux picks the advective reconstruction and bin_average decides whether a size-dependent factor is integrated over its bin or point-sampled at the left bin edge — and project()'s method argument selects the discretisation in time, "euler" or one of the second-order stepper "second_order", an alias for "tr_bdf2", or the superseded "predictor_corrector". Both default to the first-order choice, which is why this is easy to miss: an extension that ignores them looks correct, passes its own tests, and is then silently wrong for the user who switches them on. Aim to work under all of them, and where you cannot, say so out loud.

In size. The rules are in the extend-mizer skill, under "Respecting the model's quadrature scheme": build derived quantities from the rate functions rather than re-deriving them, use encounter_kernel() rather than pred_kernel() inside the convolution, write summary integrals with sizeIntegral(), and gate any array your own setter precomputes on params@second_order_w[["bin_average"]]. Two consequences reach further than that section:

• A custom Mort or Diffusion rate must be the bin average when bin_average is on, because the transport step differences it against the bin-averaged density — getDiffusion() and getMort() already return the bin average when the flag is on, because the arrays behind them are built that way at setup, so a function that wraps them inherits it and one that builds the rate from scratch does not. A custom EGrowth stays a point value at the bin boundary under both settings: growth velocities are never bin-averaged.
• Do not reimplement the transport step or the egg balance. They read the flux entry, so getRequiredRDD(), findSteadyState() and project() all agree about which reconstruction the model uses, and a hand-rolled copy in your package will not.

In time. The rules are in the extend-mizer skill, under "Components and the time stepper": under either second-order stepper a component's dynamics_fun — and a custom resource_dynamics function — is called twice per time step, once as the predictor with the start-of-step rates and once as the corrector with the midpoint rates, both times from the same t and the same start-of-step state, and only the corrector's return value survives. What to check in code that was written before those steppers existed:

• Be a pure function of your arguments. Compute the new state from the n_other[[component]] you were handed and return it. Anything that instead accumulates into a stored value — <<-, writing into other_params(params), a counter, a log file — runs twice per step and is wrong by a factor of two under the second-order methods while looking fine under "euler".
• Use the rates argument; do not recompute rates from n. Rebuilding them gives the corrector the start-of-step rates again, which silently drops the whole run back to first order rather than producing a visible error.
• Integrate your own step to second order. The corrector hands you midpoint values for e_growth, mort, diffusion, rdd and resource_mort, and start-of-step values for every other entry of the rate list. The interface asks for the new state, so your function is the integrator: state + dt * f(state, rates) stays first order under "second_order". Solve the step exactly with the rates frozen, as resource_semichemostat() does, or take an RK2 step inside the function.
• Tolerate being called out of order. The rate functions are evaluated a second time at t + dt on the predicted state, so a rate function must not assume that time advances once per call or cache "the last t I saw".
• The existing rule about discontinuities still applies, and is the one thing a better stepper cannot fix: a rate that jumps as a function of abundance is not rescued by "second_order".

Test all four corners. Running the package's own fixture under both switches, rather than only on the default path, is covered in the upgrade-mizer-code skill under "If your code is a package". An extension has more to get wrong in time, so add the order check: halving dt should move the answer by roughly a quarter rather than a half.

If you cannot support one, warn. The size scheme is a property of the object, so the setup function is the place to say so:

if (isTRUE(second_order_w(params)[["bin_average"]])) {
    signal_info(
        "second_order_w",
        paste("myExtension's detritus encounter is point-sampled at the left",
              "bin edge, so this model is not second order in w."),
        level = 1, severity = "warning", unhandled = "show"
    )
}

The time stepper is chosen per call rather than stored, so there is no equally good hook. Name the limitation in the same setup-time report, and add a project.myExtension method that inspects method before NextMethod() if you want a per-call warning as well — remembering that it catches only the calls that go through project(). The steady-state finders run the dynamics through an internal stepper, so tuneSteadyState(method = "second_order") will not reach it.

Methods on the renamed rate-array accessors

Seventeen accessors that read a stored parameter or rate array back out of a MizerParams object lost their get prefix: getCatchability() → catchability(), getExtMort() → ext_mort(), and so on. For a user nothing breaks — the get names are kept as aliases. For an extension they can break silently, because the get name is no longer a generic of its own: it is now bound to the same function object as the bare name (getExtMort <- ext_mort). A method registered on the get name is therefore never called.

Rename the method to the bare name. These eleven bare names are generics, so a method on them dispatches through both names:

catchability, selectivity, pred_kernel, search_vol, intake_max, metab, ext_mort, ext_encounter, maturity, repro_prop, reproduction_level

# BEFORE                          # AFTER
getExtMort.myExtension <- ...     ext_mort.myExtension <- ...

The remaining six — initial_effort, interaction_matrix, resource_dynamics, resource_level, resource_rate, resource_capacity — are plain functions with no UseMethod() call, so there is nowhere to hang a method at all. If your package relied on overriding one of them, that override is dead code: remove it and open an issue asking for the bare name to be made a generic, rather than leaving a method that looks live and is not.

A method exported with @method getExtMort myExtension still appears in NAMESPACE and still passes R CMD check, so nothing will point this out for you. Grep the package for method definitions whose name starts with get.

Methods on the steady-state finders

steady() and projectToSteady() are superseded by tuneSteadyState() and findSteadyState(), plus projectUntilSettled() for the trajectory. Unlike the accessors above, the old names are still generics with MizerParams methods, so steady.myExtension and projectToSteady.myExtension keep dispatching and nothing breaks.

But the four generics are independent: steady()'s method calls an internal worker, not tuneSteadyState(). A method on one name is not reached through the other. So:

• to support the new names, add tuneSteadyState.myExtension and findSteadyState.myExtension; do not move the old methods;
• keep the old methods for as long as your users may call the old names;
• note the renamed arguments when writing the new methods: tol becomes distance_tol, t_per becomes t_check, and return_sim is gone — use projectUntilSettled() for the trajectory.

Withdrawing a species parameter column

If your package adds a species parameter column and takes it away again when the user switches the extension off, it almost certainly does that by reaching into the slot, because until mizer 3.3.1 nothing else worked:

params@species_params[["my_col"]] <- NULL   # old workaround — remove

The supported route is assignment, which also updates given_species_params() and triggers the rebuild:

species_params(params)$my_col <- NULL

A column mizer knows how to calculate comes back as a calculated value; a column of your own is gone. This needs mizer (>= 3.3.1) in DESCRIPTION. See "Taking a species parameter column away again" in the create-extension-package skill.

The gamma/f0 workaround can go

The defaults for gamma and f0 are now measured on mizer's own reference state: a rate function registered with setRateFunction(), the ext_encounter array, and every other_encounter() contribution — a component's encounter_fun included — are excluded from the measurement. Packages that add encounter, such as a temperature scalar or a second resource, used to see gamma and f0 drift when the model was rebuilt, and worked around it by pinning the current gamma as a given species parameter. Drop the workaround:

given_species_params(params)$gamma <- NULL

The gamma mizer then calculates describes the species' baseline search volume, which is what a dynamic modulation is meant to modulate. Where a species genuinely has no predation encounter in the reference state — interaction_resource = 0, or a kernel that does not overlap the resource — supply gamma explicitly: mizer now raises an error naming the species instead of deriving a nonsense value from the additive contribution.

Tests that match messages or assert silence

Rephrased messages and calls that used to be quiet break tests in any package, and the sweep for them is in the upgrade-mizer-code skill under "If your code is a package". Two of them land specifically on extension code:

• tuneSteadyState() warns when a custom resource_dynamics has no matching balance_<dynamics>() function, so a test asserting silence on a package that supplies its own resource dynamics will fail. That is the point of the change: supply the missing balance_<dynamics>() function rather than silencing it.
• Anything the package emits itself should go through signal_info() rather than message() or warning(), so that it honours info_level and is collected with mizer's own reports — see the create-extension-package skill, "Telling the user what your package decided".

Links to renamed articles and skills

The cheatsheet articles became guides, and the extension material was resplit. Fix these wherever the package links them — README, vignettes, roxygen @seealso:

| Old | New | |---|---| | articles/creating-extension-packages.html | articles/guide-create-extension-package.html | | articles/using-extension-packages.html | articles/guide-use-extension-packages.html | | articles/extending-mizer.html | articles/guide-extend-mizer.html | | vignette("cheatsheet-…") | vignette("guide-…") | | the build-multispecies-model skill | the build-model skill |

The website redirects the old addresses, but a vignette() call in your own code or examples does not. Two of these rows are more than a rename: "Extending mizer" and "Guide: Extending mizer" merged into a single guide covering the mechanisms for changing mizer's dynamics, while everything that only matters once you share an extension moved into the guide to creating an extension package. Prose that paraphrases the old "Creating extension packages" article should be re-read against the new one: its advice on marker classes was wrong by the end, still telling you to write setClass("myExtension", contains = "MizerParams").

Finishing

Run the checklist for package authors in the create-extension-package skill against the result, and its procedure for running mizer's test suite against your subclass if the package is a dispatching extension. A migrated package is the best case for that check, since the whole point of the migration is that mizer's own behaviour still holds for your subclass.

mizer documentation built on Aug. 31, 2026, 5:08 p.m.