Constraints in semtree"

  collapse = TRUE,
  comment = "#>"


Load the package


semtree allows different constraints on the split evaluation (global.invariance, local.invariance, and focus.parameters). These can be set in the following object and then passed to the semtree command:


cnst <- semtree.constraints(local.invariance=NULL, 

semtree(model.x, data=df, constraints=cnst)


To illustrate the invariance constraints, let's set up a latent factor model with four indicators and simulate some data with a known predictor structure. Let's create a dataset as follows:

N <- 2000
p1 <- sample(size = N,
             x = c(0, 1),
             replace = TRUE)
p2 <- sample(size = N,
             x = c(0, 1),
             replace = TRUE)
lat <- rnorm(N, mean = 0 + p1)
loadings <- c(.5, .8, .7, .9)
observed <- lat %*% t(loadings) + rnorm(N * length(loadings), sd = .1)
observed[, 3] <- observed[, 3] + p2 * 0.5 * lat
cfa.sim <- data.frame(observed, p1 = factor(p1), p2 = factor(p2))
names(cfa.sim)[1:4] <- paste0("x", 1:4)

Here is the OpenMx model specification

latents<-c("F") <- mxModel("CFA", type="RAM", manifestVars = manifests, 
                     latentVars = latents,
       free=c(TRUE,TRUE,TRUE,TRUE), value=c(1.0,1.0,1.0,1.0) , 
       arrows=1, label=c("F__x1","F__x2","F__x3","F__x4") ),
       free=c(TRUE,TRUE,TRUE), value=c(1.0,1.0,1.0) , 
       arrows=1, label=c("const__x2","const__x3","const__x4") ),
mxPath(from="one",to=c("F"), free=c(TRUE), 
       value=c(1.0) , arrows=1, label=c("const__F") ),
mxPath(from="x1",to=c("x1"), free=c(TRUE), 
       value=c(1.0) , arrows=2, label=c("VAR_x1") ),
mxPath(from="x2",to=c("x2"), free=c(TRUE), 
       value=c(1.0) , arrows=2, label=c("VAR_x2") ),
mxPath(from="x3",to=c("x3"), free=c(TRUE), 
       value=c(1.0) , arrows=2, label=c("VAR_x3") ),
mxPath(from="x4",to=c("x4"), free=c(TRUE), 
       value=c(1.0) , arrows=2, label=c("VAR_x4") ),
mxPath(from="F",to=c("F"), free=c(FALSE), 
       value=c(1.0) , arrows=2, label=c("VAR_F") ),
mxPath(from="one",to=c("x1"), free=F, value=0, arrows=1),
mxData(cfa.sim, type = "raw")

Global Invariance

Global invariance is a relatively naive way of estimating a tree, in which a chosen set of parameters is equal across all leafs. This is achieved by fixing one or more selected parameters to the sample estimate before the tree is grown. Global invariance assures that the chosen parameters don't differ across the possible subgroups. However, if the parameters do differ, this leads to misspecification and jeopardizes the interpretation of the resulting tree structure. Using this approach is usually not recommended because it's typically not safe to assume that parameters are identical across a wide range of splits of the data. There may be cases in which it may make sense to constrain loading structures or means but it seems particularly dangerous to constrain variance components with such an approach.

tree.gc <- semtree(, data=cfa.sim, constraints=
                   semtree.constraints(global.invariance = 

Even though we retrieve both predictors in the tree, the tree structure does not represent the data generating model (p2 is found to be conditional only on p1>=.5) and the misspecification in the loadings leads to bias in the mean structure.

Local Invariance

Local invariance builds a tree under which all parameters across the leafs of a tree may differ but the chosen parameters may not differ significantly from each other. If they differed significantly, the respective split is not considered a valid split and is not chosen. Local constraints are implemented by means of an additional test of measurement invariance. For each possible split, we fit an additional null model, in which the locally invariant parameters are constrained to be equal across the two resulting daughter nodes of a split. Only if we reject this null hypothesis, we believe that there is measurement non-invariance and disregard the split. A typical use-case is to the set of loadings of a factor model as local.invariance to allow a tree with weakly measurement-invariant leafs. <- semtree(, data=cfa.sim, constraints=
                     local.invariance= c("F__x1","F__x2","F__x3","F__x4")))

Now we find p1 as the only predictor that yields subgroups that pass the measurement invariance test. Even though we have chosen the four factor loadings as local.invariance constraint, they are allowed to differ numerically but there was no significant difference between them.


Focus Parameters

First, we create some data. Here, we generate 1,000 bivariate observations x1 and x2 gathered in a data frame called obs. Also, there are two predictors grp1 and grp2. Predictor grp1 predicts a mean difference in x1 whereas grp2 predicts differences only in x2.

N <- 1000
grp1 <- sample(x = c(0,1), size=N, replace=TRUE)
grp2 <- sample(x = c(0,1), size=N, replace=TRUE)
Sigma <- matrix(byrow=TRUE,
obs <- MASS::mvrnorm(N,mu=c(0,0),
obs[,1] <- obs[,1] + ifelse(grp1,3,0)
obs[,2] <- obs[,2] + ifelse(grp2,3,0)
df.biv <- data.frame(obs, grp1=factor(grp1), grp2=factor(grp2))
names(df.biv)[1:2] <- paste0("x",1:2)

A tree without constraints should recover both parameters (given large enough sample and effect sizes) because it explores differences in both means and covariance structure of x1 and x2. Here is an OpenMx model specification for a saturated bivariate model:

model.biv <- mxModel("Bivariate_Model", 
manifestVars = manifests,
latentVars = c(),
       free=c(TRUE,TRUE), value=c(1.0,.2) , 
       arrows=2, label=c("VAR_x1","COV_x1_x2") ),
mxPath(from="x2",to=c("x2"), free=c(TRUE), 
       value=c(1.0) , arrows=2, label=c("VAR_x2") ),
mxPath(from="one",to=c("x1","x2"), label=c("mu1","mu2"),
       free=TRUE, value=0, arrows=1),
mxData(df.biv, type = "raw")

Let's run this model in OpenMx:

result <- mxRun(model.biv)

Now, we grow a tree without constraints:

tree.biv <- semtree(model.biv, data=df.biv)

As expected, we obtain a tree structure that has both p1 and p2 (here we use the viridis colors to give each leaf node a different frame color, which we'll use later again):

# default white color for all nodes
cols <- rep("black", semtree:::getNumNodes(tree.biv))
cols[as.numeric(row.names(semtree:::getTerminalNodes(tree.biv)))] <- viridis:::viridis_pal()(4)

plot(tree.biv, border.col=cols)

Let us visualize what this tree is doing. Here is the empirical joint distribution of both x1 and x2:

ggplot(data = df.biv, aes(x=x1, y=x2))+ 

And here is the partition of the observed two-dimensional space implied by the leafs of the tree (compare the density colors to the colors of the leaf nodes in the earlier dendrogram):

df.biv.pred <- data.frame(df.biv, 
  leaf=factor(getLeafs(tree=tree.biv, data = df.biv)))
ggplot(data = df.biv.pred, aes(x=x1, y=x2))+ 

What if we were interested only in splits with respect to one of the two dimensions? In this case, we can set a focus.parameter. Focus parameters change the split evaluation such that only splits are evaluated that maximize the misfit between a model in which all parameters are free and a model in which all parameters are free but the parameters given in focus.parameter.

Let us first set mu1 as focus parameter:

tree.biv2 <- semtree(model.biv, df.biv, constraints=
                      semtree.constraints(focus.parameters = "mu1"))

As expected, the resulting tree structure only has grp1 as predictor because grp1 predicts differences in mu1. Predictor grp2 did not come up anymore. Now, if we set mu2, we should see the exact opposite picture:

tree.biv3 <- semtree(model.biv, df.biv, constraints=
                      semtree.constraints(focus.parameters = "mu2"))

And, indeed, we see only grp2 as predictor whereas grp1 was not selected this time.


Finally, we set the focus.parameter to one of the variance parameters. None of the predictors predicts differences in the variance, so we expect an empty tree (only the root node; no predictors selected):

tree.biv4 <- semtree(model.biv, df.biv, constraints=
                      semtree.constraints(focus.parameters = "VAR_x2"))


Try the semtree package in your browser

Any scripts or data that you put into this service are public.

semtree documentation built on Nov. 26, 2023, 5:07 p.m.