In JokingHero/ORFik: Open Reading Frames in Genomics

Introduction

Welcome to the introduction of data management with ORFik experiment. This vignette will walk you through which data and how you import and export with ORFik, focusing on NGS library import and annotation. ORFik is an R package containing various functions for analysis of RiboSeq, RNASeq, RCP-seq, TCP-seq, Chip-seq and Cage data, we advice you to read ORFikOverview vignette, before starting this one.

Motivation

There exists a myriad of formats in bioinformatics, ORFik focuses on NGS data anlysis and therefor supports many functions to import that data. We will here learn how to use ORFik effectivly in importing data (how to convert to the format you should use). That is the format with optimal information content relative to load speed.

Importing Sequencing reads

Sequencing reads starts with fastq files. In the Annotation & Alignment vignette we walk through how to acquire (download usually) and map these reads into bam files. We here presume that this is done and you have the bam files.

ORFik currently supports these formats:

• bam
• wig
• bigwig
• bed5
• bed12
• ofst (ORFik fst format, very fast version of bam, bed or wig)

All these formats can be imported using the function fimport

ORFik also supports bam files that are collapsed, the number of duplicates is stored in the header information per read. This is a very effective speed up for short read sequencing like Ribo-seq. bigwig etc, internally supports collapsing since it uses a 'score' column.

Loading files (general)

We advice you always to create an ORFik experiment of your data, to make it simpler to code (see Data management vignette).

But here we will show you how to do direct import of files. To load a file, usually it is sufficient to use fimport.

Bam files

# Use bam file that exists in ORFik package
library(ORFik)
bam_file <- system.file("extdata/Danio_rerio_sample", "ribo-seq.bam", package = "ORFik")
footprints <- fimport(bam_file)
# This is identical to:
footprints <- readBam(bam_file)

Bam files are very cumbersome to read, so we should only do this once, and then convert to something faster (described bellow)

Other formats

Other formats are loaded in the same way

# Use bam file that exists in ORFik package
ofst_file <- system.file("extdata/Danio_rerio_sample/ofst", "ribo-seq.ofst", package = "ORFik")
footprints <- fimport(ofst_file)
# This is identical to:
footprints <- import.ofst(ofst_file)

Exporting to new formats

Since bam files are cumbersome to load, we should convert files to more optimized formats. Which formats to convert and export to, depends on if you have the files loaded already or not.

Files are not preload into R

There are several converters in ORFik, here are some examples:

BAM to OFST (keep cigar information)

ofst_out_dir <- file.path(tempdir(), "ofst/")
convert_bam_to_ofst(NULL, bam_file, ofst_out_dir)
# Find the file again
ofst_file <- list.files(ofst_out_dir, full.names = TRUE)[1]
# Load it
fimport(ofst_file)

BAM to bigwig (do not keep cigar information or read lengths)

Bigwig is a bit special, in that it is very fast (and good compression), but to make it failsafe we need the information about size for all chromosomes. Bioconductor functions are very picky about correct chromosome sizes of GRanges objects etc.

bigwig_out_dir <- file.path(tempdir(), "bigwig/")
convert_to_bigWig(NULL, bam_file, bigwig_out_dir, 
                  seq_info = seqinfo(BamFile(bam_file)))
# Find the file again
bigwig_file <- list.files(bigwig_out_dir, full.names = TRUE) 
# You see we have 2 files here, 1 for forward strand, 1 for reverse
# Load it
fimport(bigwig_file)

Files are preload into R

For preloaded files it is better to just convert it there and then, and not convert through the filepath, because then you have just loaded the file twice.

For details, see ?convertLibs and ?convertToOneBasedRanges()

Random access

The really cool thing with bigwig is that it has very fast random access.

bigwig_file <- list.files(bigwig_out_dir, full.names = TRUE) 
# Let us access a location without loading the full file.
random_point <- GRangesList(GRanges("chr24", 22711508, "-"))
# Getting raw vector (Then you need to know which strand it is on:)
bigwig_for_random_point <- bigwig_file[2] # the reverse strand file
rtracklayer::import.bw(bigwig_for_random_point, as = "NumericList",
                              which = random_point[[1]])
# 4 reads were there

ORFik also has an automatic wrapper for spliced transcript coordinates: As data.table

dt <- coveragePerTiling(random_point, bigwig_file)
dt # Position is 1, because it is relative to first

Importing Annotation

Annotation consists of 2 primary files:

• The full genome sequence (fasta genome + index, 2 individual files)
• The gtf (The location of genes on the genome etc.)

If you don't have the annotation yet on your hard drive, to get these two files for your organism, ORFik supports a direct downloader of annotation from ENSEMBL/refseq, for yeast it would look like this:

library(ORFik)
organism <- "Saccharomyces cerevisiae" # Baker's yeast
# This is where you should usually store you annotation references ->
#output_dir <- file.path(ORFik::config()["ref"], gsub(" ", "_", organism))
output_dir <- tempdir()
annotation <- getGenomeAndAnnotation(
                    organism = organism,
                    output.dir = output_dir,
                    assembly_type = "toplevel"
                    )
genome <- annotation["genome"]
gtf <- annotation["gtf"]

The gtf is a very slow format and ORFik will almost never use this directly. We therefor use a much faster format called TxDb (transcript database) The nice thing with using getGenomeAndAnnotation is that it will do a lot of important fixes for you related to import. It will make the fasta index and txdb, and a lot more optimizations that for large species like human make import time go from minutes to less than a second.

If you don't want to use getGenomeAndAnnotation, you can do it for your own annotation like this:

# Index fasta genome
indexFa(genome)
# Make TxDb object for large speedup:
txdb <- makeTxdbFromGenome(gtf, genome, organism, optimize = TRUE, return = TRUE)

The txdb is saved in the same as gtf with a ".db" extension.

Loading Genome index (fasta index)

# Access a FaFile
fa <- findFa(genome)
# Get chromosome information
seqinfo(findFa(genome))
# Load a 10 first bases from chromosome 1
txSeqsFromFa(GRangesList(GRanges("I", 1:10, "+")), fa, TRUE)
# Load a 10 first bases from chromosome 1 and 2.
txSeqsFromFa(GRangesList(GRanges("I", 1:10, "+"), GRanges("II", 1:10, "+")), fa, TRUE)

Loading Gene annotation (Txdb)

ORFik makes it very easy to load specific regions from a txdb. We already have the txdb loaded, but let us load it again

  txdb_path <- paste0(gtf, ".db")
  txdb <- loadTxdb(txdb_path)

Loading Transcript regions

Lets get these regions of the transcripts:

• All transcripts
• All mRNAs (all transcripts with CDS)
• Leaders (5' UTRs)
• CDS (Coding sequences, main ORFs)
• Trailers (3' UTRs)

  loadRegion(txdb, "tx")[1]
  loadRegion(txdb, "mrna")[1]
  loadRegion(txdb, "leaders")[1]
  loadRegion(txdb, "cds")[1]
  loadRegion(txdb, "trailers")

These are output as GRangesList, which are list elements of GRanges (1 list elements per transcript, which can contain multiple GRanges). If the gene region is not spliced, it has only 1 GRanges object.

Loading Transcript regions (filtering)

Your annotations contains many transcripts, the 2022 human GTFs usually contain around 200K transcripts, at least half of these are from non coding transcripts (they have no CDS). So how to filter out what you do not need?

Loading Transcript regions (filtering by length requirements)

Let's say you only want mRNAs, which have these properties: - Leaders >= 1nt - CDS >= 150nt - Trailers >= 0nt

We can in ORFik get this with:

  tx_to_keep <- filterTranscripts(txdb, minFiveUTR = 1, minCDS = 150, minThreeUTR = 0)
  loadRegion(txdb, "mrna")

But what if you do this?

  # This fails!
  filterTranscripts(txdb, minFiveUTR = 10, minCDS = 150, minThreeUTR = 0)

You see the SacCer3 Yeast gtf does not have any defined leaders at size 10, because the annotation is incomplete. Luckily ORFik supports creating pseudo 5' UTRs.

  txdb <- makeTxdbFromGenome(gtf, genome, organism, optimize = TRUE, return = TRUE, 
                             pseudo_5UTRS_if_needed = 100)
  filterTranscripts(txdb, minFiveUTR = 10, minCDS = 150, minThreeUTR = 0)[1:3]

Great, This now worked. For detailed access of single points like start sites or regions, see the 'working with transcripts vignette'.

Loading Transcript regions (filtering by canonical isoform)

To get canonical mRNA isoform (primary isoform defined e.g. by Ensembl)

  filterTranscripts(txdb, minFiveUTR = 0, minCDS = 1, minThreeUTR = 0, 
                    longestPerGene = TRUE)[1:3]

You here get all canonical isoform mRNAs (cds exists since minCDS >= 1)

Loading uORF annotation

You can also add in a uORF annotation defined by ORFik, like this: Here we needed the pseudo leaders (5' UTRs), because the yeast SacCer3 genome has no proper leader definitions.

  findUORFs_exp(txdb, findFa(genome), startCodon = "ATG|CTG", save_optimized = TRUE)
  loadRegion(txdb, "uorfs") # For later use, output like this

JokingHero/ORFik documentation built on May 3, 2024, 2:34 a.m.