| varImp | R Documentation |
A generic method for calculating variable importance for objects produced by
train and method specific methods
varImp(object, ...)
## S3 method for class 'bagEarth'
varImp(object, ...)
## S3 method for class 'bagFDA'
varImp(object, ...)
## S3 method for class 'C5.0'
varImp(object, ...)
## S3 method for class 'cubist'
varImp(object, weights = c(0.5, 0.5), ...)
## S3 method for class 'dsa'
varImp(object, cuts = NULL, ...)
## S3 method for class 'glm'
varImp(object, ...)
## S3 method for class 'glmnet'
varImp(object, lambda = NULL, ...)
## S3 method for class 'JRip'
varImp(object, ...)
## S3 method for class 'multinom'
varImp(object, ...)
## S3 method for class 'nnet'
varImp(object, ...)
## S3 method for class 'avNNet'
varImp(object, ...)
## S3 method for class 'PART'
varImp(object, ...)
## S3 method for class 'RRF'
varImp(object, ...)
## S3 method for class 'rpart'
varImp(object, surrogates = FALSE, competes = TRUE, ...)
## S3 method for class 'randomForest'
varImp(object, ...)
## S3 method for class 'gbm'
varImp(object, numTrees = NULL, ...)
## S3 method for class 'classbagg'
varImp(object, ...)
## S3 method for class 'regbagg'
varImp(object, ...)
## S3 method for class 'pamrtrained'
varImp(object, threshold, data, ...)
## S3 method for class 'lm'
varImp(object, ...)
## S3 method for class 'mvr'
varImp(object, estimate = NULL, ...)
## S3 method for class 'earth'
varImp(object, value = "gcv", ...)
## S3 method for class 'RandomForest'
varImp(object, ...)
## S3 method for class 'plsda'
varImp(object, ...)
## S3 method for class 'fda'
varImp(object, value = "gcv", ...)
## S3 method for class 'gam'
varImp(object, ...)
## S3 method for class 'Gam'
varImp(object, ...)
## S3 method for class 'train'
varImp(object, useModel = TRUE, nonpara = TRUE, scale = TRUE, ...)
object |
an object corresponding to a fitted model |
... |
parameters to pass to the specific |
weights |
a numeric vector of length two that weighs the usage of variables in the rule conditions and the usage in the linear models (see details below). |
cuts |
the number of rule sets to use in the model (for |
lambda |
a single value of the penalty parameter |
surrogates |
should surrogate splits contribute to the importance calculation? |
competes |
should competing splits contribute to the importance calculation? |
numTrees |
the number of iterations (trees) to use in a boosted tree model |
threshold |
the shrinkage threshold ( |
data |
the training set predictors ( |
estimate |
which estimate of performance should be used? See
|
value |
the statistic that will be used to calculate importance: either
|
useModel |
use a model based technique for measuring variable importance? This is only used for some models (lm, pls, rf, rpart, gbm, pam and mars) |
nonpara |
should nonparametric methods be used to assess the
relationship between the features and response (only used with |
scale |
should the importance values be scaled to 0 and 100? |
For models that do not have corresponding varImp methods, see
filterVarImp().
Otherwise:
Linear Models: the absolute value of the t-statistic for each model parameter is used.
glmboost and glmnet: the absolute value of the coefficients
corresponding the the tuned model are used.
Random Forest: varImp.randomForest and varImp.RandomForest are
wrappers around the importance functions from the randomForest and
party packages, respectively.
Partial Least Squares: the variable importance measure here is based on weighted sums of the absolute regression coefficients. The weights are a function of the reduction of the sums of squares across the number of PLS components and are computed separately for each outcome. Therefore, the contribution of the coefficients are weighted proportionally to the reduction in the sums of squares.
Recursive Partitioning: The reduction in the loss function (e.g. mean
squared error) attributed to each variable at each split is tabulated and
the sum is returned. Also, since there may be candidate variables that are
important but are not used in a split, the top competing variables are also
tabulated at each split. This can be turned off using the maxcompete
argument in rpart.control. This method does not currently provide
class-specific measures of importance when the response is a factor.
Bagged Trees: The same methodology as a single tree is applied to all bootstrapped trees and the total importance is returned
Boosted Trees: varImp.gbm is a wrapper around the function from that
package (see the gbm package vignette)
** Multivariate Adaptive Regression Splines**: MARS models include a
backwards elimination feature selection routine that looks at reductions in
the generalized cross-validation (GCV) estimate of error. The varImp
function tracks the changes in model statistics, such as the GCV, for each
predictor and accumulates the reduction in the statistic when each
predictor's feature is added to the model. This total reduction is used as
the variable importance measure. If a predictor was never used in any of the
MARS basis functions in the final model (after pruning), it has an
importance value of zero. Prior to June 2008, the package used an internal
function for these calculations. Currently, the varImp is a wrapper to the
earth::evimp() function in the earth package. There are three statistics
that can be used to estimate variable importance in MARS models. Using
varImp(object, value = "gcv") tracks the reduction in the generalized
cross-validation statistic as terms are added. However, there are some cases
when terms are retained in the model that result in an increase in GCV.
Negative variable importance values for MARS are set to zero.
Alternatively, using varImp(object, value = "rss") monitors the change in
the residual sums of squares (RSS) as terms are added, which will never be
negative. Also, the option varImp(object, value =" nsubsets"), which
counts the number of subsets where the variable is used (in the final,
pruned model).
Nearest shrunken centroids: The difference between the class centroids
and the overall centroid is used to measure the variable influence (see
pamr.predict). The larger the difference between the class centroid and
the overall center of the data, the larger the separation between the
classes. The training set predictions must be supplied when an object of
class pamrtrained is given to varImp.
Cubist: The Cubist output contains variable usage statistics. It gives
the percentage of times where each variable was used in a condition and/or a
linear model. Note that this output will probably be inconsistent with the
rules shown in the output from Cubist::summary.cubist(). At each split of
the tree, Cubist saves a linear model (after feature selection) that is
allowed to have terms for each variable used in the current split or any
split above it. Quinlan (1992) discusses a smoothing algorithm where each
model prediction is a linear combination of the parent and child model along
the tree. As such, the final prediction is a function of all the linear
models from the initial node to the terminal node. The percentages shown in
the Cubist output reflects all the models involved in prediction (as opposed
to the terminal models shown in the output). The variable importance used
here is a linear combination of the usage in the rule conditions and the
model.
PART and JRip: For these rule-based models, the importance for a predictor is simply the number of rules that involve the predictor.
C5.0: C5.0 measures predictor importance by determining the percentage
of training set samples that fall into all the terminal nodes after the
split. For example, the predictor in the first split automatically has an
importance measurement of 100 percent since all samples are affected by this
split. Other predictors may be used frequently in splits, but if the
terminal nodes cover only a handful of training set samples, the importance
scores may be close to zero. The same strategy is applied to rule-based
models and boosted versions of the model. The underlying function can also
return the number of times each predictor was involved in a split by using
the option metric = "usage".
Neural Networks: The method used here is based on Gevrey et al (2003), which uses combinations of the absolute values of the weights. For classification models, the class-specific importances will be the same.
Recursive Feature Elimination: Variable importance is computed using the ranking method used for feature selection. For the final subset size, the importances for the models across all resamples are averaged to compute an overall value.
Feature Selection via Univariate Filters, the percentage of resamples that a predictor was selected is determined. In other words, an importance of 0.50 means that the predictor survived the filter in half of the resamples.
A data frame with class c("varImp.train", "data.frame") for
varImp.train or a matrix for other models.
Max Kuhn
Gevrey, M., Dimopoulos, I., & Lek, S. (2003). Review and comparison of methods to study the contribution of variables in artificial neural network models. Ecological Modelling, 160(3), 249-264.
Quinlan, J. (1992). Learning with continuous classes. Proceedings of the 5th Australian Joint Conference On Artificial Intelligence, 343-348.
Other train:
extractPrediction(),
ggplot.train(),
print.train(),
train(),
trainControl()
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.