Nothing
#
# Copyright 2007-2018 by the individuals mentioned in the source code history
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Author: Michael D. Hunter
# Date: 2011.03.24
# Filename: LISRELFactorRegressionWithMeans_MatrixRaw.R
# Purpose: Create a test for the mxExpectationLISREL function using FIML. This
# test includes a model for the means and uses raw data. The known
# parameters are taken from model 3 (AKA threeLatentMultipleReg1 and
# threeLatentMultipleReg1Out) in
# models/passing/IntroSEM-ThreeLatentMultipleRegTest1.R. This is the same test as
# models/passing/LISRELFactorRegressionWithMeans_Matrix.R only it uses the raw
# data.
#------------------------------------------------------------------------------
# Revision History:
# Sat Mar 24 01:27:41 Central Daylight Time 2012 -- Michael Hunter created complete file from
# models/passing/LISRELFactorRegressionWithMeans_Matrix.R
# Sat Mar 24 01:51:53 Central Daylight Time 2012 -- Michael Hunter corrected the expected parameters
#
#--------------------------------------------------------------------
# Load OpenMx
require(OpenMx)
#--------------------------------------------------------------------
# Read in and set up the data
IndManExo <- 1:8
IndManEnd <- 9:12
# The data
data(latentMultipleRegExample1)
# Rearange Columns to separate exogenous and endogenous variables
rawlisdat <- latentMultipleRegExample1[, c(IndManEnd, IndManExo)]
# Take covariance and means
covlisdat <- cov(rawlisdat)
mealisdat <- colMeans(rawlisdat)
# Number of manifest and latent exogenous and endogenous variables
numLatExo <- 2
numLatEnd <- 1
numManExo <- 8
numManEnd <- 4
# Dimnames
LatExo <- paste('xi', 1:numLatExo, sep='')
LatEnd <- paste('eta', 1:numLatEnd, sep='')
ManExo <- names(rawlisdat)[(numManEnd+1):(numManEnd+numManExo)]
ManEnd <- names(rawlisdat)[1:numManEnd]
#--------------------------------------------------------------------
# Specify the 13 extended LISREL matrices
lx <- mxMatrix("Full", numManExo, numLatExo,
free=c(F,T,T,T,F,F,F,F,F,F,F,F,F,T,T,T),
values=c(1, .2, .2, .2, 0, 0, 0, 0, 0, 0, 0, 0, 1, .2, .2, .2),
labels=c( paste('l', 1, 1:4, sep=''), rep(NA, 8), paste('l', 2, 5:8, sep='')),
name='LX',
dimnames=list(ManExo, LatExo)
) #DONE
ly <- mxMatrix("Full", numManEnd, numLatEnd,
free=c(F,T,T,T),
values=c(1, .2, .2, .2),
labels= paste('l', 3, 9:12, sep=''),
name='LY',
dimnames=list(ManEnd, LatEnd)
) #DONE
be <- mxMatrix("Zero", numLatEnd, numLatEnd, name='BE', dimnames=list(LatEnd, LatEnd)) #DONE
ga <- mxMatrix("Full", numLatEnd, numLatExo,
free=T,
values=.2,
labels=c('b13', 'b23'),
name='GA',
dimnames=list(LatEnd, LatExo)
) #DONE
ph <- mxMatrix("Symm", numLatExo, numLatExo,
free=c(T,T,T),
values=c(.8, .3, .8),
labels=c('varF1', 'covF1F2', 'varF2'),
name='PH',
dimnames=list(LatExo, LatExo)
) #DONE
ps <- mxMatrix("Symm", numLatEnd, numLatEnd,
free=T,
values=.8,
labels='varF3',
name='PS',
dimnames=list(LatEnd, LatEnd)
) #DONE
td <- mxMatrix("Diag", numManExo, numManExo,
free=T,
values=.8,
labels=paste('d', 1:8, sep=''),
name='TD',
dimnames=list(ManExo, ManExo)
) #DONE
te <- mxMatrix("Diag", numManEnd, numManEnd,
free=T,
values=.8,
labels=paste('e', 9:12, sep=''),
name='TE',
dimnames=list(ManEnd, ManEnd)
) #DONE
th <- mxMatrix("Zero", numManExo, numManEnd, name='TH', dimnames=list(ManExo, ManEnd)) #DONE
tx <- mxMatrix("Full", numManExo, 1,
free=T,
values=.1,
labels=paste('m', 1:8, sep=''),
name='TX',
dimnames=list(ManExo, "TXMeans")
) #DONE
ty <- mxMatrix("Full", numManEnd, 1,
free=T,
values=.1,
labels=paste('m', 9:12, sep=''),
name='TY',
dimnames=list(ManEnd, "TYMeans")
) #DONE
ka <- mxMatrix("Zero", numLatExo, 1, name='KA', dimnames=list(LatExo, "KAMeans")) #DONE
al <- mxMatrix("Zero", numLatEnd, 1, name='AL', dimnames=list(LatEnd, "ALMeans")) #DONE
#--------------------------------------------------------------------
# Define the model
lmod <- mxModel(
name='LISREL Factor Regression Model with Means',
mxData(observed=rawlisdat, type='raw', means=mealisdat),
lx, ly, be, ga, ph, ps, td, te, th, tx, ty, ka, al,
mxExpectationLISREL(LX=lx$name, LY=ly$name, BE=be$name,
GA=ga$name, PH=ph$name, PS=ps$name, TD=td$name,
TE=te$name, TH=th$name, TX=tx$name, TY=ty$name,
KA=ka$name, AL=al$name),
mxFitFunctionML()
)
#--------------------------------------------------------------------
# Run the model
# Uncomment the following lines when debugbing
#lmodRun <- mxRun(lmod, onlyFrontend=TRUE) # This runs fine.
#lmod <- mxOption(lmod, "Calculate Hessian", "No")
#lmod <- mxOption(lmod, "Standard Errors", "No")
#lmod <- mxOption(lmod, "Major iterations", 0)
lmodRun <- mxRun(lmod)
summary(lmodRun)
#--------------------------------------------------------------------
# Compare the estimate parameters to known values
# Recal that The known parameters are taken from model 3 (AKA
# threeLatentMultipleReg1 and threeLatentMultipleReg1Out) in
# models/passing/IntroSEM-ThreeLatentMultipleRegTest1.R.
expectedParam <- c(
0.809021, 1.148334, 1.305356, 0.805289, 1.232038, 1.189698,
0.87486, 0.786604, 0.701819, 0.990778, 0.456683, 1.92904,
0.153399, 1.316878, 0.770605, 1.133502, 1.067425, 1.063866,
1.053663, 0.847609, 0.761789, 1.186354, 1.009936, 0.942481,
0.971017, 0.880311, 0.956065, 0.060813, 0.037374, -0.048679,
-0.013194, 0.193348, 0.220002, 0.256785, 0.171892, 0.166191,
0.23483, 0.173025, 0.157615
)
omxCheckCloseEnough(lmodRun$output$estimate, expectedParam, epsilon=0.001)
#--------------------------------------------------------------------
# End
Any scripts or data that you put into this service are public.
Add the following code to your website.
For more information on customizing the embed code, read Embedding Snippets.