R/mlefit.r

Defines functions mlefit

Documented in mlefit

mlefit<-function(x, dist="weibull", npar=2, debias="none", optcontrol=NULL)  {
## tz is required for MLEloglike and MLEsimplex calls now
		default_tz=0
## sign is now required for MLEloglike call
		default_sign=1

## check basic parameters of x
	#if(class(x)!="data.frame") stop("FMbounds takes a structured dataframe input, use mleframe")	
	if(!is(x, "data.frame")) stop("mlefit takes a structured dataframe input, use mleframe")
	if(ncol(x)!=3)  {stop("mlefit takes a structured dataframe input, use mleframe")}
	#if(x$right[1] != min(x$right[x$right != -1])) {stop("use mleframe to sort data")
	xnames<-names(x)
	if(xnames[1]!="left" || xnames[2]!="right"||xnames[3]!="qty")  {
		 stop("mlefit takes a structured dataframe input, use mleframe")  }
## test for any na's and stop, else testint below will be wrong

## It turns out that this code is general to all fitting methods:
	if(tolower(dist) %in% c("weibull","weibull2p","weibull3p")){
		fit_dist<-"weibull"
	}else{
		if(tolower(dist) %in% c("lnorm", "lognormal","lognormal2p", "lognormal3p")){
			fit_dist<-"lnorm"
		}else{
#			if(!dist=="gumbel") {
		## Note:  only lslr contains experimental support for "gumbel"
			stop(paste0("dist argument ", dist, "is not recognized for mle fitting"))
#			}
		}
	}

##	npar<-2 ## introducing 3p in dist argument will override any npar (or its default)
	if(tolower(dist) %in% c("weibull3p", "lognormal3p")){
		npar<-3
	}

## initialize counts at zero, to be filled as found
	Nf=0
	Ns=0
	Nd=0
	Ni=0

## need this length information regardless of input object formation

	failNDX<-which(x$right==x$left)
	suspNDX<-which(x$right<0)
	Nf_rows<-length(failNDX)
	if(Nf_rows>0) {
		Nf<-sum(x[failNDX,3])
	}
	Ns_rows<-length(suspNDX)
	if(Ns_rows>0) {
		Ns<-sum(x[suspNDX,3])
	}
	discoveryNDX<-which(x$left==0)
	Nd_rows<-length(discoveryNDX)
	if(Nd_rows>0) {
		Nd<-sum(x[discoveryNDX,3])
	}
	testint<-x$right-x$left
	intervalNDX<-which(testint>0)
	interval<-x[intervalNDX,]
	intervalsNDX<-which(interval$left>0)
	Ni_rows<-length(intervalsNDX)
	if(Ni_rows>0) {
		Ni<-sum(interval[intervalsNDX,3])
	}


## rebuild input vector from components, because this order is critical
	fsiq<-rbind(x[failNDX,], x[suspNDX,], x[discoveryNDX,], interval[intervalsNDX,])

## Not sure what to place as restriction for C++ call
##	if((Nf+Ni)<3)  {stop("insufficient failure data")}


## now form the arguments for C++ call
## fsdi is the time vector to pass into C++
	fsd<-NULL
	if((Nf+Ns)>0)  {
		fsd<-fsiq$left[1:(Nf_rows + Ns_rows)]
	}
	if(Nd>0) {
		fsd<-c(fsd,fsiq$right[(Nf_rows + Ns_rows + 1):(Nf_rows +  Ns_rows + Nd_rows)])
	}
	if(Ni>0)  {
		fsdi<-c(fsd, fsiq$left[(Nf_rows + Ns_rows + Nd_rows + 1):nrow(fsiq)],
		fsiq$right[(Nf_rows + Ns_rows + Nd_rows + 1):nrow(fsiq)])
	}else{
		fsdi<-fsd
	}

	q<-fsiq$qty
## third argument will be c(Nf,Ns,Nd,Ni)
	N<-c(Nf_rows,Ns_rows,Nd_rows,Ni_rows)

	mrr_fail_data<- c(rep(x[failNDX,1],x[failNDX,3]),
		rep( x[discoveryNDX,2]/2, x[discoveryNDX,3]),
		rep((interval[intervalsNDX,1]+(interval[intervalsNDX,2]-interval[intervalsNDX,1])/2), interval[intervalsNDX,3])
		)
	mrr_susp_data<-rep(x[suspNDX,1], x[suspNDX,3])

## establish distribution number and start parameters
	if(fit_dist=="weibull"){
		dist_num=1
## single failure data set with suspensions (only) uses simplistic weibayes for vstart
		if(Nf==1 && Nd+Ni==0) {
		weibayes_scale <-x[failNDX,1]+sum(x[suspNDX,1])
		vstart<- c(1, weibayes_scale)
		warning("single failure data set may be candidate for weibayes fitting")
		}else{
# use of quick fit could have been circular here
#		mrr_fit<-MRRw2p(mrr_fail_data, mrr_susp_data)
			mrr_fit<-lslr(getPPP(mrr_fail_data, mrr_susp_data), abpval=FALSE)
			shape<-mrr_fit[2]
			scale<- mrr_fit[1]
			vstart <- c(shape, scale)

		}

	}else{
		if(fit_dist=="lnorm"){
			dist_num=2
# use of quick fit could have been circular here
#			mrr_fit<-MRRln2p(mrr_fail_data, mrr_susp_data)
			mrr_fit<-lslr(getPPP(mrr_fail_data, mrr_susp_data), dist="lognormal", abpval=FALSE)
			ml<- mrr_fit[1]
			sdl<- mrr_fit[2]
#			ml <- mean(log(data_est))
#			sdl<- sd(log(data_est))
			vstart<-c(ml,sdl)
		}else{
			stop("distribution not resolved for mle fitting")
		}
	}

## Optional optimization control list to be handled here			
		## vstart default as estimated	
		limit <-1e-6	
		maxit <-100	
		listout <-FALSE	
# default optimization controls for 3p seek			
		num_points <-20	
		err_t0_limit <- 1e-6	
		err_gof_limit <- 1e-5	
		try_limit <- 100	
			
	if(length(optcontrol)>0)  {		
		if(length(optcontrol$vstart>0))  {	
			vstart<-optcontrol$vstart
		}	
		if(length(optcontrol$limit)>0)  {	
			limit<-optcontrol$limit
		}	
		if(length(optcontrol$maxit)>0)  {	
			maxit<-optcontrol$maxit
		}	
		if(length(optcontrol$listout)>0)  {	
			listout<-optcontrol$listout
		}	
		if(length(optcontrol$num_points>0))  {	
			num_points<-optcontrol$num_points
		}	
		if(length(optcontrol$err_t0_limit>0))  {	
			err_t0_limit<-optcontrol$err_t0_limit
		}	
		if(length(optcontrol$err_gof_limit>0))  {	
			err_gof_limit<-optcontrol$err_gof_limit
		}	
		if(length(optcontrol$try_limit>0))  {	
			try_limit<-optcontrol$try_limit
		}	
	}		


	pos<-1
	Q<-sum(q)
	for(j in seq(1,4))  {
		if(N[j]>0) {
			Q<-c(Q, sum(q[pos:(pos+N[j]-1)]))
			pos<-pos+N[j]
		}else{
			Q<-c(Q, 0)
		}
	}
	names(Q)<-c("n","fo", "s", "d", "i")

	MLEclassList<-list(fsdi=fsdi,q=q,N=N,dist_num=dist_num)
## Test for successful log-likelihood calculation with given vstart
# 		LLtest<-.Call("MLEloglike",MLEclassList,vstart,default_sign, default_tz, package="WeibullR")
 		LLtest<-.Call(MLEloglike,MLEclassList,vstart, default_sign, default_tz)
## This should have failed as left with abremDebias call.
		if(!is.finite(LLtest))  {
			stop("Cannot start mle optimization with given parameters")
		}

	#ControlList<-list(dist_num=dist_num,limit=limit,maxit=maxit)
	ControlList<-list(limit=limit,maxit=maxit)

## here is a good place to validate any debias argument (before more calculations begin)
	if(debias!="none" && dist_num==1)  {
		if(tolower(debias)!="rba"&&tolower(debias)!="mean"&&tolower(debias)!="hrbu")  {
			stop("debias method not resolved")
		}
	}




## Handle the original 2 parameter case first
##	if(tolower(dist)=="weibull" || tolower(dist)=="lognormal" ||tolower(dist)=="weibull2p" || tolower(dist)=="lognormal2p"  )  {
	if(npar==2) {

## listout control is passed as an integer to C++, this enables temporary change of status without losing input argument value

			if(listout==TRUE)  {
				listout_int<-1
			}else{
				listout_int<-0
			}
##  tz  inserted here with a default of zero
# 		result_of_simplex_call<-.Call("MLEsimplex",MLEclassList, ControlList, vstart, default_tz, listout_int, package="WeibullR")
 		result_of_simplex_call<-.Call(MLEsimplex,MLEclassList, ControlList, vstart, default_tz, listout_int)
## extract fit vector from result of call to enable finishing treatment of the outvec
		if(listout==FALSE)  {
			resultvec<-result_of_simplex_call
		}else{
			resultvec<-result_of_simplex_call[[1]]
		}
		outvec<-resultvec[1:3]
		if(resultvec[4]>0)  {
			warn<-"likelihood optimization did not converge"
			attr(outvec,"warning")<-warn
		}

		if(dist_num == 1)  {
			names(outvec)<-c("Eta","Beta","LL")
			if(debias!="none")  {
				if(debias!="rba"&&debias!="mean"&&debias!="hrbu")  {
					stop("debias method not resolved")
				}
				if(debias=="rba")  {
					outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="weibull",basis="median")
				}
				if(debias=="mean")  {
					outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="weibull",basis="mean")
				}
				if(debias=="hrbu")  {
					outvec[2]<-outvec[2]*hrbu(Q[1]-Q[3], Q[3])
				}
# 			outvec[3]<-.Call("MLEloglike",MLEclassList,c(outvec[2],outvec[1]), default_sign, default_tz, package="WeibullR")
 			outvec[3]<-.Call(MLEloglike,MLEclassList,c(outvec[2],outvec[1]), default_sign, default_tz)
			attr(outvec,"bias_adj")<-debias
			}
		}

		if(dist_num == 2)  {
			names(outvec)<-c("Mulog","Sigmalog","LL")
			if(debias!="none")  {
				outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="lognormal")
				if(debias!="rba")  {
					warning("rba has been applied to adjust lognormal")
					debias="rba"
				}
# 			outvec[3]<-.Call("MLEloglike",MLEclassList,c(outvec[1],outvec[2]), default_sign, default_tz, package="WeibullR")
 			outvec[3]<-.Call(MLEloglike,MLEclassList,c(outvec[1],outvec[2]), default_sign, default_tz)
			attr(outvec,"bias_adj")<-debias
			}
		}


		if(listout==TRUE) {
			optDF<-as.data.frame(result_of_simplex_call[[2]])
			if(dist_num == 1)  {
				names(optDF)<-c("beta_est", "eta_est", "negLL", "error")
			}
			if(dist_num == 2)  {
				names(optDF)<-c("mulog_est", "sigmalog_est", "negLL", "error")
			}
		}

## end of 2p code
	}



##  this section of code is specifically addressing 3p models
##	if(tolower(dist)=="weibull3p" || tolower(dist)=="lognormal3p"  )  {
	if(npar==3) {

## For now, listout is passed as integer
## listout argument has different meaning for 3p models
		listout_int<-0

## for now enter a default tz=0
# 			result_of_simplex_call<-.Call("MLEsimplex",MLEclassList, ControlList, vstart, default_tz, listout_int, package="WeibullR")
 			result_of_simplex_call<-.Call(MLEsimplex,MLEclassList, ControlList, vstart, default_tz, listout_int)
			if(result_of_simplex_call[4]>0)  {
				stop("2p model does not converge")
			}
## restore the meaning of listout
			if(listout==TRUE)  {
				listout_int<-1
			}else{
				listout_int<-0
			}

## set the 3p seek_control list
	if(num_points<5) {	
	num_points<-5
	warning("num_points specified too small, num_points=5 used")
	}				
	seek_control<-list(num_points=num_points, err_t0_limit=err_t0_limit, err_gof_limit=err_gof_limit)						

	# establish the maximum limit for t0						
	## MLEmodel will treat convert any negative x$left-tz as zero						
	## Note discoveries continue to be discoveries until x$right-tz = zero						
	maxtz<-min(x$right[x$right != -1])

## set simplex control based on mlefit defaults or optcontrol items						
	#simplex_control<-list(limit=1e-5, maxit=100) # previously hard coded here
		simplex_control<-list(limit=limit, maxit=maxit)
							
## This is the point to go to C++						
## Will need to pass in MLEclassList, fit_dist and seek_control							
							
## temporarily the output from the C++ call will be named out_object and immediately returned to R

## Note: vstart was defined before separating processing based on npar

# ret3p<-.Call("callMLE3p", MLEclassList, simplex_control, vstart, maxtz, seek_control, package="WeibullR")

  ret3p<-.Call(callMLE3p, MLEclassList, simplex_control, vstart, maxtz, seek_control)

outvec<-ret3p$outvec

#   	## must collect outvec and try_list from return of C++ call				
#   		#outvec<-DF[max_ind,]			
#   		# returning a single line dataframe causes later problems, needs to be a named vector			
#   		outvec<-c(DF$P1[max_ind], DF$P2[max_ind], DF$tz[max_ind],DF$gof[max_ind])			
#   		##names(outvec)<-""			
#   					
   		if(dist_num==1)  {			
   			names(outvec)<-c("Eta","Beta", "t0", "LL")		
   			if(debias!="none")  {		
   				if(debias=="rba")  {	
   					outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="weibull",basis="median")
   				}	
   				if(debias=="mean")  {	
   					outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="weibull",basis="mean")
   				}	
   				if(debias=="hrbu")  {	
   					outvec[2]<-outvec[2]*hrbu(Q[1]-Q[3], Q[3])
   				}	
#    				outvec[4]<-.Call("MLEloglike",MLEclassList,c(outvec[2],outvec[1]), default_sign, outvec[3], package="WeibullR")	
    				outvec[4]<-.Call(MLEloglike,MLEclassList,c(outvec[2],outvec[1]), default_sign, outvec[3])	
   				attr(outvec,"bias_adj")<-debias	
   			}		
   		}			
   		if(dist_num == 2)  {			
   			names(outvec)<-c("Mulog","Sigmalog", "t0", "LL")		
   			if(debias!="none")  {		
   				outvec[2]<-outvec[2]*rba(Q[1]-Q[3], dist="lognormal")	
   				if(debias!="rba")  {	
   					warning("rba has been applied to adjust lognormal")
   					debias="rba"
   				}	
#    				outvec[4]<-.Call("MLEloglike",MLEclassList,c(outvec[1],outvec[2]), default_sign, outvec[3],package="WeibullR")	
  				outvec[4]<-.Call(MLEloglike,MLEclassList,c(outvec[1],outvec[2]), default_sign, outvec[3])	
   				attr(outvec,"bias_adj")<-debias	
   			}		
   		}			
   					
		if(ret3p$positive_runout == TRUE) {	
			attr(outvec, "message")<-"t0 cutoff at minimal change"
		}	
			
		if(ret3p$negative_runout == TRUE) {	
			attr(outvec, "message")<-"optimum not found, t0 cutoff at minimal gof change"
		}	
			
		if(ret3p$rebound == TRUE) {	
			attr(outvec, "rebound")<-ret3p$rebound_value
		}	
		
		try_list<-ret3p$try_list

## end of 3p code
}

attr(outvec,"data_types")<-Q[-2]

## For 3p testing purposes listout code is limited to 2p results
if(npar==2) {
## the following applies to both 2p and 3p results
## it is used by LRbounds to simplify data_type determination for debias adjustment
## but often removed for normal use by attributes(fit_vec)$data_types<-NULL
	

	if(listout==FALSE) {
		out_object<-outvec
	}else{
		if(npar==2)  out_object<-list(fit=outvec, opt=optDF)
		if(npar==3)  out_object<-list(fit=outvec, opt=try_list)
	}
}else{
	out_object<-outvec
}	
	out_object

## end function
}

Try the WeibullR package in your browser

Any scripts or data that you put into this service are public.

WeibullR documentation built on June 26, 2022, 1:06 a.m.